The Fertilisers And Chemicals Travancore Limited Tender

Providing and fixing wooden false ceiling with 12 mm thick BWR grade (Merino, Green ply, Green lam, Century) marine ply and 1 mm wood textured laminate strips finish at all height including providing and fixing of frame work with hard wood, labour, hire charges, material ,etc. complete.

Providing , laying and grouting Anti-skid vitrified tiles of minimum 1200x600 mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer in all colours & shades in flooring, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 mm , using epoxy grout mix of 0.70 kg of organic coated filler of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete as per direction of Engineer-in-charge.(Purchase price of tiles at site to be in the range of Rs. 60/Sqft to Rs. 70/Sqft.)

Providing , laying and grouting Glazed vitrified tiles (GVT) of minimum 1200x600 mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer in all colours & shades in skirting, risers of steps and dados etc. fix with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 mm , using epoxy grout mix of 0.70 kg of organic coated filler of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete as per direction of Engineer-in-charge. (Purchase price of tiles at site to be in the range of Rs. 70/Sqft to Rs. 90/Sqft.)

Laminated wooden floor with 10 years warrenty material minimum 16 mm thk. BWR grade (Merino, Green ply, Green lam, Century) marine ply and frame work with hard wood including cost of material, labour, etc…complete.

Acoustic linear batton Cladding Hunter Douglas/NISHABD SLATS- Wall Supply & installation of NISHABD Slats made of pinewood E1 grade fiber board, Melamine laminated finish Hunter Douglas/Nishabd, groove perforated slats L16-3/L23-3/L32- 3/Customized - (3mm grooves Slats @16mm centres) back lined with black acoustical fleece, tongue-groove edge for a seamless look, of size 192 &128x2440x15/17mm thick having base density 700Kg – 800 Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC25with the help of fasteners at every 400mm centres. Slats of size 192 & 128x 2430x15/17mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs both ways. Panels shall be back lined with acoustical infill of 1000gsm x 50mm thick adhered to the wall using Stick adhesive. Technical Parameters: • Core Variants – Wood Core E1 Fibreboard • Fire – Class A • Acoustics – NRC upto 0.75 • Climate (OC RH) – 50, 70 • Green (RC %) – 25 • Strength, Load capacity (Kg) - Ball-Impact

Architrave and Niche on window opening Niche with 12mm thk. BWR grade (Merino, Green ply, Green lam, Century) marine ply with 1mm thk. Laminate and 1mm edge band. Rates are including cost of material, labour, hire charges, etc...complete.

Supplying and fixing Factory made flush door of approved make and of 1.2x2.4m size in single leaf, 35 mm thick with both side Veneered door shutter with matching Veneer wrapped engineered wood Jamb 100mmx36mm with front side 65 mm Architraves with back side tackers 26mm all with specialized Lacquer Polish , with Extruded Sauerland Core filling from Germany including 4 side PVC edge banding, Lock Hole Boring (for mortice lock)/ Hinge Rebate Cutting (3 Nos.) including charges for loading/ unloading, transportation, installation by authorised crew of manufacturer and with following fittings of same manufacturer: Mortise Lock with Lever handles with One Side Key Other side Thumb turn -SS finish - SUS 202 of Jacson or eqvt approved make - 1 No. Hinges 4" x 3" x 3mm S S finish -3 Nos. Magnetic door stopper SS Finish - 1 No. Additional fittings if any required shall be included in the quoted rate. The installation and the setting instructions should be strictly followed as per the manufacturer's recommendations.

Providing and fixing wall panelling with 8mm BWR grade plywood pasted with 1mm laminate(Merino, Green or equivalent approved brand) and framed with 18mm BWR grade plywood as per design. All visible faces to be edge banded withapproved colour lipping. All laminates to be hot pressed on BWR grade ply including cost of all materials and labour.

Table inside side facade box covering 12mm thk. BWR grade (Merino, Green ply, Green lam, Century) marine ply with 0.8mm thk. Laminate and 1mm at edge. Give access door inside of round table . Rates are including cost of material, labour, hire charges, etc...complete.

Polishing the wood furniture/panelling with matt finish lacquer polish including cost of material, labour etc. complete as per detailed specification noted in Special Conditions of work Clause 2 e and as per the direction of the Engineer in Charge.

Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Supplying and fixing FACT Logo in 6mm fusion work Glass with colouring and 4mm mirror backing (size 1.8mx1.13m) as per approval of Engineer In Charge

Disconnection and dismantling of existing light fittings, switch boards, fans, wiring, etc., and storing the same at the location instructed by the engineer-in-charge.

Point wiring over false ceiling / wall with individual control for lights, plugs etc. Scope of work includes supply, wiring, testing and commissioning of switchboard controlled light / plug points with 1.5 sq.mm FRLS PVC insulated copper wire and earthing with 1.5 sq.mm FRLS PVC insulated copper wire in 25mm dia FRLS PVC conduit with surface Tee, saddles, conduit fixing material and PVC connector. Scope of work also includes supply and fixing of modular switches complete with modular plate with GI boxes of suitable size. All the materials required for wiring such as copper flexible cable, metallic modular switch boards, modular switches, modular cover plate, dummy plates, ceiling rose, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For a point wiring, pipe length upto 10 metres shall be considered as one point. Pipe length above 10m upto 15m will considered as one and half points.

Looping of point wiring upto 6m over false ceiling / wall from above point wiring as mentioned in item no.1. Scope of work includes supply, wiring, testing and commissioning of switchboard controlled light/ plug points with 1.5 sq.mm FRLS PVC insulated copper wire and earthing with 1.5 sq.mm FRLS PVC insulated copper wire in 25mm dia FRLS PVC conduit with surface Tee, saddles, conduit fixing material and PVC connector. Scope of work also includes supply and fixing of modular switches complete with modular plate with GI boxes of suitable size. All the materials required for wiring such as copper flexible cable, metallic modular switch boards, modular switches, modular cover plate, dummy plates, ceiling rose, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For looping point wiring, pipe length upto 6 metres shall be considered as one loop point.

Point wiring for 6A shuttered switched socket outlet over existing raceways / conduits . Scope of work includes supply, wiring, testing and commissioning of 6Ashuttered switched socket outlet with 2.5 sq.mm FRLS PVC insulated copper wire and earthing with 2.5 sq.mm FRLS PVC insulated copper wire in existing raceways / conduits, PVC connector. Scope of work also includes supply and fixing of GI boxes of suitable size. All the materials required for wiring such as FRLS PVC insulated copper flexible wire, metallic modular switch boards, shuttered switched socket, modular cover plate, dummy plates, ceiling rose, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For a point wiring, pipe length upto 10 metres shall be considered as one point. Pipe length above 10m upto 15m will considered as one and half points.

Looping of point wiring upto 6m for 6A shuttered switched socket from above point wiring as mentioned in item no.3, over existing raceways / conduits . Scope of work includes supply, wiring, testing and commissioning of 6A shuttered switched socket outlet with 2.5 sq.mm FRLS PVC insulated copper wire and earthing with 2.5 sq.mm FRLS PVC insulated copper wire in existing raceways / conduits, PVC connector. Scope of work also includes supply and fixing of GI boxes of suitable size. All the materials required for wiring such as FRLS PVC insulated copper flexible wire, metallic modular switch boards, switched socket, modular cover plate, dummy plates, ceiling rose, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For looping point wiring, pipe length upto 6 metres shall be considered as one loop point.

Point wiring for pop-up type 6A switched socket outlet over existing raceways / conduits . Scope of work includes supply, wiring, testing and commissioning of pop-up type 6A shuttered switched socket outlet with 2.5 sq.mm FRLS PVC insulated copper wire and earthing with 2.5 sq.mm FRLS PVC insulated copper wire in existing raceways / conduits, PVC connector. Scope of work also includes supply and fixing of GI boxes of suitable size. All the materials required for wiring such as FRLS PVC insulated copper flexible wire, pop-up type switch socket, dummy plates etc. shall be in the scope of contractor. For a point wiring, pipe length upto 10 metres shall be considered as one point. Pipe length above 10m upto 15m will considered as one and half points.

Point wiring for 16A shuttered switched socket outlet over existing raceways / conduits . Scope of work includes supply, wiring, testing and commissioning of 16A shuttered switched socket outlet with 4 sq.mm FRLS PVC insulated copper wire and earthing with 4 sq.mm FRLS PVC insulated copper wire in existing raceways / conduits, PVC connector. Scope of work also includes supply and fixing of GI boxes of suitable size. All the materials required for wiring such as FRLS PVC insulated copper flexible wire, metallic modular switch boards, switched socket, modular cover plate, dummy plates, ceiling rose, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For a point wiring, pipe length upto 10 metres shall be considered as one point. Pipe length above 10m upto 15m will considered as one and half points.

Point wiring for 16A class C 2P MCB with enclosure, over existing raceways / conduits for Air Conditioner. Scope of work includes supply, wiring, testing and commissioning of 16A class C 2P MCB with enclosure with 4 sq.mm FRLS PVC insulated copper wire and earthing with 4 sq.mm FRLS PVC insulated copper wire in existing raceways / conduits, PVC connector. Scope of work also includes supply and fixing of enclosures of suitable size. All the materials required for wiring such as FRLS PVC insulated copper flexible wire, MCB with enclosure, dummy plates, PVC Junction boxes(2/3/4 way) etc. shall be in the scope of contractor. For a point wiring, pipe length upto 10 metres shall be considered as one point. Pipe length above 10m upto 15m will considered as one and half points.

Supply, fixing and servicing of 16.5W (min) LED strip light with required fixing accessories

Supply, fixing and servicing of drive suitable for 16.5W (or equivalent to offered higher rating) LED strip light with required clamps / fastners.

Supply, fixing and servicing of 12W LED ceiling light of neutral white color with required clamps / fastners.

Supply, fixing and servicing of 6W LED ceiling light of neutral white color with required clamps / fastners.

Supply, fixing and servicing of 3W LED spot light of neutral white / warm color with required fixing accessories

Supply, fixing and servicing of 5W LED spot light of neutral white / warm color with required fixing accessories

Supply, fixing and servicing of 8W LED spot light of neutral white / warm color with required fixing accessories

Supply, fixing and servicing of exhaust fan, 200 x 200 mm, 1500 - 2000 rpm with required fixing accessories

Erection, termination and connection of the 4 way, 3Ph , 415Volts Horizondal/Vertical MCB Lighting DB having 63A RCCB incomer and 16A single phase outgoing feeders as specified below. The incomer PVC armoured cable shall be glanded/terminated and connected by FACT. All other required items including LDB with MCB's, flexible copper cables, end terminals and glands etc. shall be in the scope of Contractor.

Supply, installation, testing and commissioning of boundary layer chairman unit microphone with following specification: 1.Connection : 8 PIN 2. Sensitivity : -44dB +/- 2dB 3. Frequency response : 100 Hz - 16 kHz 4. 'Muting delegates' feature, talk button with discussion & video support : Required 5. Color : Black 6. Installation : Tabletop 7. THD : 0.05%

Supply, installation, testing and commissioning of boundary layer delegate unit microphone with following specification: 1. Connection : 8 PIN 2. Supports disscussion and video along with talk button : required 3. Sensitivity : -44dB +/- 2dB 4. Frequency response : 100 Hz - 16 kHz 5. Color : Black 6. Installation : Tabletop 7. THD : 0.05%

Supply, installation, testing and commissioning of audio controller for audio conferencing. The controller shall support minimum 30 units of chairman & delegate microphones with provision of extension power unit to connect aditional microphones. The controller shall have speaker tracking compatible with camera and processor whose details are specified elsewhere in the document.

Supply, installation, testing and commissioning of Integrated Processor with Controller with 'Look at me' feature compatability and having following specification: 1. Power supply : 110V to 220V AC, 50 Hz 2. Frequency response : 40 Hz - 16 kHz 3. THD : 0.05% Following additional features/functionalities are also required: 1. Power switch & Power LED 2. Data port for connection of video processor 3. LINE OUT 4. MX OUT 5. Extension power supply unit consisting of power indicator with six output line to connect microphone. 6. Other essential features : Integrated look-at-me controller, shall have inbuilt video switching matrix. It shall support high speed shifting of camera which shall follow the location for last opening of all speaking representative. When the microphone which opened last was closed, the camera shall follow back the last following spot, and when all microphones are closed, the camera chall automatically moves back to the standby position.

Supply, installation, testing and commissioning of 60W ceiling speaker

Supply, installation, testing and commissioning of amplifier with following specification: 1. Power Output : 245W Max, 175W rms at 10%THD, 110W rms at 5% THD 2. Output regulation : 2 dB, no load to full at 1 kHz 3. Input channels : 5 x Mic 0.65 mV / 4.7 kOhms, 2 x Aux 100 mV / 470 kOhms 4. Frequency Response : 50 - 15000 Hz +/- 3 dB 5. Signal to noise ratio : 60 dB 6. Tone Controls : Bass +/- 10dB at 100 Hz, Treble +/- 10 dB at 10 kHz 7. Outputs Line : 200 mV/ 6000 Ohms, 1V/1kOhms 8. Speaker Output : 4 Ohms, 8 Ohms and 100 V 9. Digital Player : MP3 player with USB, SD Card and bluetooth 10. Power Supply : AC - 220-240 V AC, 50 Hz / DC - 12V 11. Following additional features/functionalities are also required: a. USB pen drive port, SD card plug and play, compatible with radio and bluetooth, EQ & recording, 5 channel microphone input, 2 channel Aux inputs, 1 channel line output, 100V constant voltage output and 4 hms / 8 ohms / 16 ohms resistance output.

Supply, installation, testing and commissioning of Digital signal Processor (DSP) to process signals for above components and having following specification: 1. DSP with high end processor (Ti 456 MHz FLOPS double core or superior) 2. USB : Suitable for soft VC and shall support play & recording with Audio In & Out for PC Connectivity 3. Input processing : Preamp, signal generator, expander, compressor, 5-band parametric equalisation, auto gain, AM auto mix funstion, Adaptive Feedback Cancellation (AFC) 4. Output processing : Speaker management ( 31-band graphic equalizer, delay, crossover, limiter, high and low channel filters) 5. Matrix mixing : matrix mixing of input and output signals, mixing component control, 6. Automatic Camera Tracking Function : required 7. Scene presets : 100 group customized settings 8. Port Configuration : 4 nos. analog input channels, 4 nos. analog output channels, 1 no. ethernet control port, 1 no. RS 232, 1 no. RS 485, 8 nos GPIO 9. Input gain amplification: -24 ~ 27 dB, 3dB, Level1 with minimum7 levels 10. Balanced/unbalanced, Input/output support : Required 11. MIC/LINE, Input/Output Support : Required 12. Independent 48V Phantom power supply per channel : Required 13. Support processing algorithms required: AM & AGC 14. Sampling : 48 kHz or better, 15. Phantom Power : 48V 16. Frequecny response : 20-20 kHz, +/-0.2 dB or better 17. THD+N : /= 0.004% @ 4dBu, 18. Operating Power Supply : 110 - 220V AC, 50 Hz, 19. Background Noise : -90 dBu or better Other features shall include Auto Echo Cancellation, auto noise cancellation module, automatic mixing console, camera traking for 'look-at-me' function etc.

Supply, installation, testing and commissioning of handheld microphone with suitable receiver, compatible for above system. The microphones shall be suitable for UHF band frequency. Allowable distance between microphone and receiver shall be minimum 100 meter.

Integration of Viewsonic make 86" Integrated Flat Touch Panel (Model No. VS19495) to the processor as specified in item no 24. The Integrated Flat Touch Panel with associated accessories including mounting brackets will be supplied by FACT.

Wal mounting installation and integration of 43" LED TV in conference room with screen mirror connectivity to Integrated Flat Touch Panel mentioned above. 43" LED TV with associated accessories including mounting brackets will be supplied by FACT.

Mounting and integration of PTZ camera over flat touch panel. Supply of camera is under scope of FACT. All other accesories such as fasteners, connectors, cables etc. are under the scope of contractor.

Supply and installation of 17U rack

Supply of cables and connectors suitable for above system

Supply and fixing of echo suppressor

Installation, testing, configuring and programming of entire system

Supply of 3 nos. LED and driver of each type along with strip LED of 5 meters for usage as future spare.