The Fertilisers And Chemicals Travancore Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Osbl Pipelines For 1650 Mtpd Npk Plant-piping, Mechanical, Instrumentation, Civil And Structural Works, Amablamedu, Kochi.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_FACT_836531_1Bid Award Id
ViewTender No
04031/2024-2025/E30469Tender Authority
The Fertilisers And Chemicals Travancore Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: in Cement Mortar.
2
-
-
... More
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats.
1000
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
1000
-
-
... More
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping ground for lead up to 10 km for all lifts ,within the premises of FACT CD, , complete as per directions of Engineer-in-Charge.
20
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, in all kinds of soil, including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer-in -charge, with in a lead of 50m. The rates shall include bailing out water, and keeping the sides from collapsing using necessary timbering, planking, and shoring.
400
-
-
... More
Excavation below ground level in Hard Rock without blasting by either use of non-explosive material and / or use of construction equipment like compressed air or rock breaker or by wire saw method for all kinds of work in foundation including Footings,RCC Pits, pavements, cable trenches, pipe sleepers, excavation for Mechanical/Electrical/Instrumentation related jobs etc. including all labour, materials, dressing of sides, levelling, grading and ramming of bottom, pumping in & pumping out water (including using well point system, if required. However, no separate payment shall be applicable for the well-point system, in this regard) accumulated due to rain and/or subsoil waters and including dismantling and providing temporary supports to existing service lines like water pipes, sewerage, electric cables, etc. complete, including shoring/strutting if required, all materials and labour complete and as directed by Engineer-in-Charge. (Item also includes disposal of the excavated earth up to 100M from the nearest edge of the excavated area).
2
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
320
-
-
... More
Charges for conveying the surplus earth to places approximately 5 kms away and dumping at low lying places as directed by the Engineer incharge.
80
-
-
... More
Providing hard core layer of required thickness using 40mm Nominal size graded hard granite broken stones after compacting the underlying soil, spreading and levelling the stones and then spreading a layer of 6mm downgraded crushed aggregates on top of the broken metal layer and it shall be watered in order to force the crushed fine aggregates into the void spaces of the broken stone and repeat the process till all the voids are filled with crushed fine aggregates right up to the edges of hard core layer, including cost of all materials and labour charges etc., complete.
1
-
-
... More
Providing and laying plain cement concrete work in 1:4:8 mix (1 cement: 4 coarse river sand/manufactured sand: 8 40mm nominal size graded hard granite broken stones) including all charges for mixing concrete, laying, consolidating, curing, etc. complete at all levels as per standard specifications but excluding the cost of shuttering, and as directed by the Engineer in-charge for foundation / levelling course etc.
12
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using PPC cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 400 kg/cum. Excess cement used as per design mix is payable/recoverable separately) - For all works upto Plinth Level.
57
-
-
... More
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size) work at all levels, excluding cost of centering, shuttering, finishing and reinforcement & including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer incharge- For yard paving.
2
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using PPC cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable/recoverable separately) - For all works upto Plinth Level.
3
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using PPC cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable/recoverable separately) - For all works above Plinth Level.
3
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
2500
-
-
... More
Carriage of RCC precast structures from within the premises of FACTCD to the specified locations of pipe sleepers as indicated in the GFC drawings, with a maximum travel distance of 3km.
25
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade reinforced cement concrete for precast cover slab with cement content as per approved design mix, using Portland pozzolana cement, river sand / manufactured sand conforming to IS 383 and 20mm nominal size graded hard granite broken stones including all charges for designing the mix, weigh batching, formwork, laying, vibrating, consolidating, curing with minimal use of potable water subject to provision of IS 456, handling, transporting, loading, unloading, keeping and fixing in position, at all levels etc., complete but excluding cost of providing reinforcements. (Exposed surfaces of pre-cast elements shall have good finish with no blemish or mark on the finished surfaces) NOTE- (1) Minimum Cement content shall be @ 330 kg/cum. Excess cement used as per design mix is payable/recoverable separately.
5
-
-
... More
Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for foundation footings, pedestals,bases of columns and walls and for mass concrete with straight sides.
255
-
-
... More
Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for Columns, Pillars, Piers, Abutments, Posts and Struts. Rate to include for shuttering at all heights.
25
-
-
... More
Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for Lintels, beams, plinth beams, girders, bressumers and cantilevers. Rate to include for shuttering at all heights.
25
-
-
... More
Providing form work to cement concrete and RCC works with necessary plywood / steel sheet, steel joists, runners, struts, posts etc with adjustable spans and telescopic posts, wooden planks etc. including removal after completion /curing at all levels for Suspended floors, roofs, landings, balconies and access platform, weather shades, chajja etc. including side shuttering. Rate to include for shuttering at all heights.
25
-
-
... More
Supplying, fabricating, conveying, and fixing reinforcement to RCC works at all levels with high strength deformed bars Fe 500D/ 550D grade Thermo Mechanically Treated (TMT) bars conforming to IS 1786 including all charges for uncoiling and straightening rods, cutting rods, bending cold, placing in position and supplying & tying with black annealed tying wire of 16 gauge, etc. complete.
7500
-
-
... More
Supplying, conveying fabrication and erection of MS single section members such as channels, guard rail, MS angle hand rails verticals, etc. with fixtures such as end stops, clamps, bolts and nuts etc. including charges for cutting, splicing, drilling holes as required, fixing to lines and levels. Preparation of surface and painting shall be as mentioned in “Specific requirements of work”-for cantilever beams, grating supporting beams and columns.
3000
-
-
... More
Supply, fabrication and erection of structural steel work in built up sections, bolted or welded at all levels with MS angles, channels, tees, flats, RSJs, rods, pipes, hollow rectangular sections and plates for roof trusses, purlins, cladding, runners, grating supports, etc. including cutting, welding, hoisting, erecting in position with necessary MS bolts including preparation of surface by grit/shot blasting .The rate shall include erecting necessary scaffolding works wherever required and covering working area during blast cleaning with tarpaulin of good quality to prevent spreading of dust. Preparation of surface and Painting of the structural steel shall be as mentioned in “Specific requirements of work”.
63500
-
-
... More
Providing high impact Polypropylene reinforced cement 6mm thick corrugated sheets( as per IS:14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia G.I. plain and bitumen washers or with self-drilling fasteners and EPDM washers etc complete(excluding the cost of purlins, rafters and trusses) including cutting sheets to size and shape wherever required.
40
-
-
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete to all lines and levels and applying petroleum jelly / grease after erection on exposed surface of bolts, covering the same with plastic wraps to prevent corrosion.
670
-
-
... More
Supply, transportation and application of 2 coats of anticorrosive bituminous coating on concrete surfaces (below ground) : Applying 2 coats of anticorrosive Bituminous coating. Cleaning the surface of all laitance and loose particles to provide a clean base to receive primer. Surface shall be made rough by Light sandblasting/Water jet washing/Hard wire brushing for proper bonding. Application of first coat of hot bitumen paint. Application of second coat of hot bitumen paint after the first coat is cured for minimum 24 hrs.with all materials, consumables, labour, tools and tackles, scaffolding etc all complete as per specifications and directions of Engineer in Charge.
255
-
-
... More
Supplying, Conveying, fabricating and fixing MS inserts of all types fabricated out of MS plates, angles, channels, flats, rods, fabricated pieces, etc. . in RCC/ masonry works at all levels including all charges for cutting, welding, fixing to lines and levels and painting as mentioned in “Specific requirements of work”.
0.5
-
-
... More
Supplying and fixing rebars in already cast concrete/hard rock, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of HILTI (RE 500 V4) or Equivalent make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 12 mm, DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. (Supply of all materials shall be in contractor's scope ).
100
-
-
... More
Supplying and fixing rebars in already cast concrete/hard rock, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of HILTI (RE 500 V4) or Equivalent make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm, DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. (Supply of all materials shall be in contractor's scope).
40
-
-
... More
Supply and installation of chemical anchors type “Hilti” HVU or equivalent as per drawings, including the cost of the bolts, carting the same to site of work, fixing in position with necessary, tools, labour etc for all heights and depths, drilling holes, anchor rods (HAS / HAS-E) with nuts and washers, and fastening as per vendor’s specifications, complete and as directed by the E-i-C.: Installation of anchor rods HASU 5.8 M16 with HVU 2 Capsule.
20
-
-
... More
Supply, drilling/cleaning hole and fixing of Hilti/Fischer Torque Controlled expansion anchor HST3 of Hilti or FAZ II of Fischer, of sizes ranging M10/M12/M16, to the specified embedment depth and specification, with the applicable tools and tackles, under the guidance of the manufacturers’ supervisor or authorised personnel.
20
-
-
... More
Supplying and grouting pockets, base plates, etc. at all levels for structural steel supports using nonshrink grout shrinkkomp 20 of M/s ACC or Conbextra GP 2 of M/s FOSROC or equivalent.
0.5
-
-
... More
Supplying of pultruded GRP gratings made of vinyl ester resin having 38mm Height, I- Bar spacing=40mm (clear opening 25mm)with 150mm Cross rod spacing containing glass fibre content not less than 60% and having fire retardant characteristics, suitable for imposed load of 500 kg/sqm of colour yellow/grey and designed for a max support span of 1200mm having inbuilt antiskid serrations, with 4 Nos. SS hold down clamps. GRP Material type tested for UV resistant meeting ASTM G-154 for 1000 Hour Accelerated weathering test with tensile strength & Flexrual Strength not reducing more than 5% & type tested as per ASTM E-84 meeting Flame Spread ≤25 & Smoke Spread Index ≤ 100.
20
-
-
... More
Providing and laying acid proof tiles after cleaning the cement finished surface well with water and allowing to dry, brushing and removing all dust, apply two coats of approved quality bitumen based primer conforming to IS. 1580 as per manufacture's specification, applying 12 mm thick asphalt membrane with hot melt asphalt free from filler conforming to IS. 1580, then laying acid resistant tiles of class II quality conforming to IS. 4860 over a bed of 6 mm thick potassium based silicate cement mortar conforming to IS. 4832 - part. I & 4441 and joints 5 mm thick, raking the joints to full depth from the top surface, removing the raked-out mortar and filling the entire depth of joints with Furan base resin cement mortar conforming to IS. 4832 - part. II including acid washing curing etc. complete as per relevant IS. 4443 specifications at all heights. with 230x112x38 mm or nearest size tile.
10
-
-
... More
Supplying and fixing in required size and shape Artocarpus hirsutus (Aini/Anjili) wooden piece, with necessary fixing arrangement to pump foundation, as instructed by Engineering in charge.
1
-
-
... More
Erection & Commissioning at site of Horizontal Centrifugal Phosphoric Acid Transfer Pumps (P-3203C/D) with Electric drive motor
2
-
-
... More
Erection & Commissioning at site of Horizontal Centrifugal DM Water Transfer Pump (P-601A/B) with Electric drive motor.
2
-
-
... More
Design (Mechanical &Thermal), Detailed Engineering, Preparation and approval of drawings & documents, procurement, fabrication, assembly, Surface preparation & Painting (CSparts) inspection and testing, Supply of all materials (including all accessories), Packaging & Forwarding, Transportation, unloading at site, Erection and Commissioning of De-Superheater package(DS-001) along with all accessories as per the Tender specifications.
1
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, PE, ASME B 36.10, SCH 80, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS - 003.
18
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, BE, ASME B 36.10, SCH 40, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, BE, ASME B 36.10, SCH 40, 100NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
60
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, BE, ASME B 36.10, SCH 40, 200NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
42
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, BE, ASME B 36.10, SCH 40, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
12
-
-
... More
Supply of CS pipe, A106 Gr.B, SMLS, BE, ASME B 36.10, SCH 40, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS pipe, API 5L Gr.B PSL 1, WELDED, BE, ASME B 36.10, SCH 40, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
30
-
-
... More
Supply of CS pipe, API 5L Gr.B PSL 1, WELDED, BE, ASME B 36.10, SCH 20, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
108
-
-
... More
Supply of CS pipe, API 5L Gr.B PSL 1, WELDED, BE, ASME B 36.10, SCH 20, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
48
-
-
... More
Supply of SS pipe - A312 TP 304L, SMLS, PE, ASME B 36.19, SCH 40S, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
402
-
-
... More
Supply of SS pipe - A312 TP 304L, SMLS, BE, ASME B 36.19, SCH 10S, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
212
-
-
... More
Supply of SS pipe - A312 TP 304, SMLS, PE, ASME B 36.19, SCH 40S, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
30
-
-
... More
Supply of SS pipe - A312 TP 304, SMLS, PE, ASME B 36.19, SCH 40S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
24
-
-
... More
Supply of SS pipe - A312 TP 304, SMLS, BE, ASME B 36.19, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
480
-
-
... More
Supply of SS pipe - A312 TP 304, SMLS, BE, ASME B 36.19, SCH 10S, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of SS pipe - A312 TP316L, SMLS, BE, ASME B 36.19, SCH 40S, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
204
-
-
... More
Supply of SS pipe - A790 UNS S31803, SMLS, PE, ASME B 36.19, SCH 40S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of SS pipe - A790 UNS S31803, SMLS, BE, ASME B 36.19, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
36
-
-
... More
Supply of SS pipe - A790 UNS S31803, SMLS, BE, ASME B 36.19, SCH 10S, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS pipe - A790 UNS S31803, SMLS, BE, ASME B 36.19, SCH 10S, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS Rubber Lined Flanged End Pipes ( Standard size of 5500 mm) - API 5L Gr.B PSL 1, WLD, FLGD, ASME B 36.10, SCH 20, 250 NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of CS Rubber Lined Flanged End Pipes ( Standard size of 5500 mm) - API 5L Gr.B PSL 1, WLD, FLGD, ASME B 36.10, SCH 20, 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003.
108
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - 90LR, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - 90LR, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
40
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - 90LR, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
7
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - EQT, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - EQT, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS Rubber Lined Fittings With Flanged Ends - EQT, A 234 WPB, SMLS, FLGD, B16.9, SCH 20, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
9
-
-
... More
Supply of CS Rubber Lined Reduced Fittings With Flanged Ends - CON.RED, A 234 WPB, SMLS, FLGD, B16.9, 200NB (SCH 20) x 150NB (SCH 40), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Rubber Lined Reduced Fittings With Flanged Ends - ECC.RED, A 234 WPB, SMLS, FLGD, B16.9, 200NB (SCH 20) x 150NB (SCH 40), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of CS Rubber Lined Reduced Fittings With Flanged Ends - ECC.RED, A 234 WPB, SMLS, FLGD, B16.9, 250NB (SCH 20) x 200NB (SCH 20), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Carbon Steel Fittings - 90LR, A 105, FGD, 3000, SW, B 16.11, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Carbon Steel Fittings - 90LR, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Carbon Steel Fittings - 90LR, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 100NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Carbon Steel Fittings - 90LR, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 200NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Fittings - 90LR, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Carbon Steel Fittings - EQT, A 105, FGD, 3000, SW, B 16.11, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - EQT, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - EQT, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 100NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
5
-
-
... More
Supply of Carbon Steel Fittings - EQT, A 234 Gr. WPB, SMLS, BW, B 16.9, SCH 40, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, BEP, B 36.10, SCH 80, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, BEP, B 36.10, SCH 80, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, BEP, B 36.10, SCH 80, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, OET, B 36.10, SCH 160, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, OET, B 36.10, SCH 160, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Carbon Steel Fittings - NIPPLE, A106 Gr.B, SMLS, OET, B 36.10, SCH 160, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - HPLG, A 105, FGD, 3000, SW, B 16.11, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Fittings - HPLG, A 105, FGD, 3000, SW, B 16.11, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - HPLG, A 105, FGD, 3000, SW, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Carbon Steel Fittings - HPLG, A 105, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - CAP, A 105, FGD, 3000, THD, B 16.11, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Fittings - CAP, A 105, FGD, 3000, THD, B 16.11, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - CAP, A 105, FGD, 3000, THD, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Carbon Steel Fittings - CAP, A 105, FGD, 3000, THD, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Fittings - SPECTACLE BLIND, A 105, 150#, RF/125-250 AARH, B 16.48, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Carbon Steel Fittings - SPECTACLE BLIND, A 105, 300#, RF/125-250 AARH, B 16.48, 200NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 182 F 304L, FGD, 3000, SW, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
25
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 403 S 304L, SMLS, BW, B 16.9, SCH 10S, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
12
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 182 F 304, FGD, 3000, SW, B 16.11, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
14
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 182 F 304, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 182 F 51, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 815 S S 31803, SMLS, BW, B 16.9, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 403 S 304, SMLS, BW, B 16.9, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
30
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 403 S 304, SMLS, BW, B 16.9, SCH 10S, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
5
-
-
... More
Supply of Stainless Steel Fittings - 90LR, A 403 S 316L, SMLS, BW, B 16.9, SCH 40S, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
12
-
-
... More
Supply of Stainless Steel Fittings - 45LR, A 403 S 304L, SMLS, BW, B 16.9, SCH 10S, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Stainless Steel Fittings - 45LR, A 403 S 304, SMLS, BW, B 16.9, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 182 F 304L, FGD, 3000, SW, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 182 F 304, FGD, 3000, SW, B 16.11, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 182 F 304, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 403 S 316L, SMLS, BW, B 16.9, SCH 40S, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 182 F 51, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 815 S S 31803, SMLS, BW, B 16.9, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 403 S 304, SMLS, BW, B 16.9, SCH 10S, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Stainless Steel Fittings - EQT, A 403 S 304, SMLS, BW, B 16.9, SCH 10S, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304L, SMLS, BEP, B 36.19, SCH 40S, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
5
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304L, SMLS, BEP, B 36.19, SCH 40S, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304, SMLS, BEP, B 36.19, SCH 40S, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304, SMLS, BEP, B 36.19, SCH 40S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A790 UNS S31803, SMLS, BEP, B 36.19, SCH 40S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 316L, SMLS, BEP, B 36.19, SCH 40S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304L, SMLS, OET, B 36.19, SCH 40S, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
5
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304L, SMLS, OET, B 36.19, SCH 40S, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304, SMLS, OET, B 36.19, SCH 80S, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 304, SMLS, OET, B 36.19, SCH 80S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Stainless Steel Fittings - NIPPLE, A 312 TP 316L, SMLS, OET, B 36.19, SCH 80S, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - FPLG, A 182 F 304L, FGD, 3000, SW, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
80
-
-
... More
Supply of Stainless Steel Fittings - HPLG, A 182 F 304L, FGD, 3000, SW, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Stainless Steel Fittings - HPLG, A 182 F 304, FGD, 3000, SW, B 16.11, 15NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - HPLG, A 182 F 304, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Stainless Steel Fittings - HPLG, A 182 F 51, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Stainless Steel Fittings - HPLG, A 182 F 316L, FGD, 3000, SW, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - WELD OLET, A 182 F 51, BW, MSS SP97, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - CAP, A 182 F 304L, FGD, 3000, THD, B 16.11, 15NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
5
-
-
... More
Supply of Stainless Steel Fittings - CAP, A 182 F 304L, FGD, 3000, THD, B 16.11, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of Stainless Steel Fittings - CAP, A 182 F 304, FGD, 3000, THD, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of Stainless Steel Fittings - CAP, A 182 F 316L, FGD, 3000, THD, B 16.11, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Stainless Steel Fittings - SPECTACLE BLIND, A 182 F 304L, 150#, RF/125-250 AARH, B 16.48, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Fittings - SPECTACLE BLIND, A 182 F 316L, 150#, RF/125-250 AARH, B 16.48, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Reduced Fittings - ECC, A234 GR.WPB, SMLS, BW, B 16.9, 100NB (SCH 40) x 40NB (SCH 80), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Carbon Steel Reduced Fittings - ECC, A234 GR.WPB, SMLS, BW, B 16.9, 100NB (SCH 40) x 50NB (SCH 40), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Carbon Steel Reduced Fittings - ECC, A234 GR.WPB, SMLS, BW, B 16.9, 100NB (SCH 40) x 80NB (SCH 40), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Carbon Steel Reduced Fittings - ECC, A234 GR.WPB, SMLS, BW, B 16.9, 200NB (SCH 40) x 100NB (SCH 40), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Carbon Steel Reduced Fittings - CON., A234 GR.WPB, SMLS, BW, B 16.9, 100NB (SCH 40) x 80NB (SCH 40), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Carbon Steel Reduced Fittings - CON., A234 GR.WPB, SMLS, BW, B 16.9, 150NB (SCH 40) x 100NB (SCH 40), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Stainless Steel Reduced Fittings - RCPLG, A 182 F 304L, FGD, SW, B 16.11, 25NB (3000#) x 15NB (3000#), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Stainless Steel Reduced Fittings - RCPLG, A 182 F 304L, FGD, SW, B 16.11, 25NB (3000#) x 20NB (3000#), IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Stainless Steel Reduced Fittings - RCPLG, A 182 F 304, FGD, SW, B 16.11, 25NB (3000#) x 15NB (3000#), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Stainless Steel Reduced Fittings - ECC, A403 S304, SMLS, BW, B 16.9, 80NB (SCH 10S) x 50NB (SCH 10S), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Stainless Steel Reduced Fittings - CON, A403 S304, SMLS, BW, B 16.9, 50NB (SCH 10S) x 40NB (SCH 40S), Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of CS Flanges - SW, A105, RF/125-250 AARH, SCH 80, B 16.5, 600#, 40NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS Flanges - WN, A105, RF/125-250 AARH, SCH 40, B 16.5, 300#, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Flanges - WN, A105, RF/125-250 AARH, SCH 40, B 16.5, 300#, 100NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS Flanges - WN, A105, RF/125-250 AARH, SCH 40, B 16.5, 300#, 200NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Flanges - WN, A105, RF/125-250 AARH, SCH 40, B 16.5, 600#, 80NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of CS Flanges - WN, A105 RF/125-250 AARH, SCH 40, B 16.5, 600#, 100NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
14
-
-
... More
Supply of CS Flanges - WN, A105, RF/125-250 AARH, SCH 40, B 16.5, 300#, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Flanges - SO, A105, RF/125-250 AARH, SCH 40, B 16.5, 150#, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of CS Flanges - SO, A105, RF/125-250 AARH, SCH 40, B 16.5, 150#, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of CS Flanges - SO, A105, RF/125-250 AARH, SCH 40, B 16.5, 150#, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
130
-
-
... More
Supply of CS Flanges - SO, A105, RF/125-250 AARH, SCH 40, B 16.5, 150#, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
66
-
-
... More
Supply of CS Flanges - BLIND, A105, RF/125-250 AARH, B 16.5, 150#, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of CS Flanges - BLIND, A105, RF/125-250 AARH, B 16.5, 150#, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of CS Flanges - BLIND, A105, RF/125-250 AARH, B 16.5, 300#, 100NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of CS Flanges - BLIND, A105, RF/125-250 AARH, B 16.5, 300#, 200NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of SS Flange - SW, A182 F304L, RF/125-250 AARH, SCH 40S, B 16.5, 600#, 20NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS Flange - SW, A182 F304L, RF/125-250 AARH, SCH 40S, B 16.5, 600#, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of SS Flange - SO, A182 F304L, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of SS Flange - SW, A182 F304, RF/125-250 AARH, SCH 40S, B 16.5, 150#, 40NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of SS Flange - SO, A182 F304, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
14
-
-
... More
Supply of SS Flange - SO, A182 F304, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
12
-
-
... More
Supply of SS Flange - SW, A182 F316L, RF/125-250 AARH, SCH 40S, B 16.5, 150#, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
14
-
-
... More
Supply of SS Flange - SO, A182 F316L, RF/125-250 AARH, SCH 40S, B 16.5, 150#, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS Flange - SW, A182 F51, RF/125-250 AARH, SCH 40S, B 16.5, 150#, 25NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS Flange - SO, A182 F51, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
18
-
-
... More
Supply of SS Flange - SO, A182 F51, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 200NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS Flange - SO, A182 F51, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of SS Flange - BLIND, A182 F304L, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 50NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of SS Flange - BLIND, A182 F304, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 50NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of SS Flange - BLIND, A182 F304, RF/125-250 AARH, SCH 10S, B 16.5, 150#, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of SS Flange - BLIND, A182 F316L, RF/125-250 AARH, SCH 40S, B 16.5, 150#, 150NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of gaskets - BUTYL RUBBER/EPDM,IBC, B 16.21, 3mm THK, 25NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of gaskets - SYNTHETIC FIBER/CNAF, IBC, B 16.21, 3mm THK, 50NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
15
-
-
... More
Supply of gaskets - BUTYL RUBBER/EPDM,IBC, B 16.21, 3mm THK, 50NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
22
-
-
... More
Supply of gaskets - SYNTHETIC FIBER/CNAF, IBC, B 16.21, 3mm THK, 80NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of gaskets - CNAF, IBC, B 16.21, 3mm THK, 100NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of gaskets - IBC PTFE, B 16.21, 3mm THK, 25NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
14
-
-
... More
Supply of gaskets - IBC PTFE, B 16.21, 3mm THK, 150NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of gaskets - BUTYL RUBBER/EPDM,IBC, B 16.21, 3mm THK, 150NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of gaskets - BUTYL RUBBER/EPDM,IBC, B 16.21, 3mm THK, 200NB, to suit flange FF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
225
-
-
... More
Supply of gaskets - BUTYL RUBBER/EPDM,IBC, B 16.21, 3mm THK, 250NB, to suit flange FF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
62
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE ,IBC, B 16.21, 3mm THK, 50NB, to suit flange RF, 150#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , RING TYPE, B 16.21, 3mm THK, 50NB, to suit flange RF, 300#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of gaskets - SS 304 + GRAFOIL, B 16.20, 4.5mm THK, 100NB, to suit flange RF, 300#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , RING TYPE, B 16.21, 3mm THK, 100NB, to suit flange RF, 300#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , RING TYPE, B 16.21, 3mm THK, 200NB, to suit flange RF, 300#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , IBC, B 16.21, 3mm THK, 20NB, to suit flange RF, 600#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , IBC, B 16.21, 3mm THK, 25NB, to suit flange RF, 600#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
10
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , RING TYPE, B 16.21, 3mm THK, 80NB, to suit flange RF, 600#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of gaskets - FLEXIBLE GRAPHITE , RING TYPE, B 16.21, 3mm THK, 100NB, to suit flange RF, 600#, B 16.5, as per the attached TPS no. 32687 - 03 - PS – 003.
16
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M12, 70mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
80
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M16, 85mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
116
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M16, 90mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
24
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M16, 90mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 20NB, as per the attached TPS no. 32687 - 03 - PS – 003.
20
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M16, 95mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
40
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M16, 95mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 80NB, as per the attached TPS no. 32687 - 03 - PS – 003.
68
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M20, 110mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 150NB, as per the attached TPS no. 32687 - 03 - PS – 003.
120
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M20, 100mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 150NB, as per the attached TPS no. 32687 - 03 - PS – 003.
40
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M20, 120mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 200NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1752
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M20, 115mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
72
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M22, 140mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 250NB, as per the attached TPS no. 32687 - 03 - PS – 003.
684
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M20, 125mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 80NB, as per the attached TPS no. 32687 - 03 - PS – 003.
16
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M22, 145mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
112
-
-
... More
Supply of Bolts and Nuts – STUD, A193GR.B7, M22, 140mm, HEX NUT, A194GR.2H, THREADING AS PER 03ES306/10, 200NB, as per the attached TPS no. 32687 - 03 - PS – 003.
36
-
-
... More
Supply of Gate Valves - GAV 201, 800# A105, TRIM-8 (13% Cr), OS&Y, SW, API 602, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Gate Valves - GAV 201S, 800# A105, TRIM-8 (13% Cr), OS&Y, IBR, SW, API 602, 800#, 15NB, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Gate Valves - GAV 201S, 800# A105, TRIM-8 (13% Cr), OS&Y, IBR, SW, API 602, 800#, 20NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Gate Valves - GAV 201S, 800# A105, TRIM-8 (13% Cr), OS&Y, IBR, SW, API 602, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
6
-
-
... More
Supply of Gate Valves - GAV 210, 150# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, RF, API 600, 150#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Gate Valves - GAV 211, 300# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, RF, API 600, 300#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Gate Valves - GAV 211S, 300# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, IBR, RF, API 600, 300#, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Gate Valves - GAV 211S, 300# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, IBR, RF, API 600, 300#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Gate Valves - GAV 211S, 300# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, IBR, RF, API 600, 300#, 200NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Gate Valves - GAV 212S, 600# A216 GR.WCB, TRIM-8 (13% Cr), OS&Y, IBR, RF, API 600, 600#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Gate Valves - GAV 401S, 800#, A182 Gr. F304L, TRIM - 2 (A182 Gr. F304L), OS&Y, IBR, SW, API 602, 800#, 15NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Gate Valves - GAV 401S, 800#, A182 Gr. F304L, TRIM - 2 (A182 Gr. F304L), OS&Y, IBR, SW, API 602, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
12
-
-
... More
Supply of Gate Valves - GAV 410S, 150#, A351 Gr.CF3 TRIM - 2(SS 304L), OS&Y, IBR, RF, API 600, 150#, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Gate Valves - GAV 501, 800#, A182 Gr. F304, TRIM - 2 (A182 Gr. F304), OS&Y, SW, API 602, 800#, 15NB, as per the attached TPS no. 32687 - 03 - PS – 003.
7
-
-
... More
Supply of Gate Valves - GAV 501, 800#, A182 Gr. F304, TRIM - 2 (A182 Gr. F304), OS&Y, SW, API 602, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
16
-
-
... More
Supply of Gate Valve - GAV 510, 150#, A351 CF8 TRIM - 2(SS 304), OS&Y, RF, API 600, 150#, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Gate Valve - GAV 510, 150#, A351 CF8 TRIM - 2(SS 304), OS&Y, RF, API 600, 150#, 80NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Gate Valve - GAV 610, 150# A351 GR. CN7M, TRIM - ALLOY 20 (A351 Gr.CN7M), OS&Y, RF, API 600, 150#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
7
-
-
... More
Supply of Gate Valve - GAV 610, 150# A351 GR. CN7M, TRIM - ALLOY 20 (A351 Gr.CN7M), OS&Y, RF, API 600, 150#, 150NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Globe Valve - GLV 401S, 800#, A182 GR. F304L, TRIM-SS 304L, IBR, FULL BORE, SW, BS1873, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Globe Valve - GLV 212S, 600#, A216 GR.WCB, TRIM- (13% Cr), IBR, FULL BORE, RF, BS 1873, 600#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Ball Valve - BAV 601 150# A351 GR. CN7M, BALL - ALLOY 20 (A351 Gr.CN7M), RF, BS 5351, 150#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
3
-
-
... More
Supply of Ball Valve - BAV 610, 150# A351 GR. CN7M, BALL - ALLOY 20 (A351 Gr.CN7M), RF, MSS SP 72, 150#, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
8
-
-
... More
Supply of Ball Valve - BAV 610, 150# A351 GR. CN7M, BALL - ALLOY 20 (A351 Gr.CN7M), RF, MSS SP 72, 150#, 150NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Ball Valve - BAV 611, 150# A351 GR. CN7M, BALL - ALLOY 20 (A351 Gr.CN7M), RF, MSS SP 72, 150#, 200NB, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Ball Valve - BAV 611, 150# A351 GR. CN7M, BALL - ALLOY 20 (A351 Gr.CN7M), RF, MSS SP 72, 150#, 250NB, as per the attached TPS no. 32687 - 03 - PS – 003.
4
-
-
... More
Supply of Check Valve - CHV 401S, LIFT CHECK VALVE, 800#, A182 Gr F304L, TRIM-304L, IBR, SW, API 602, 800#, 25NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Check Valve - CHV 211S, SWING CHECK VALVE, 300#, A216 GR.WCB, IBR, TRIM-13% Cr, RF, BS 1868, 300#, 100NB, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Supply of Check Valve - CHV 510, SWING CHECK VALVE, 150#, A351 CF8 TRIM - SS 304, RF, BS1868, 150#, 50NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Check Valve - CHV 610, CHECK VALVE, 150# A351 GR. CN7M, TRIM - ALLOY 20 (A351 Gr.CN7M), RF, MSS SP 42, 150#, 200NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Steam Trap - SW, A105/SS3I6, 20NB, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Strainers - YTS 610, Y TYPE, A351 GR. CN7M, ALLOY 20, FLG - 150#, 250NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Strainers - YTS 510, Y TYPE, A351 GR. CF8, SS304, FLG - 150#, 80NB, Non-IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
2
-
-
... More
Supply of Strainers - YTS 410, Y TYPE, A 182 F304L, SS 304L, 800#, 25NB, IBR, as per the attached TPS no. 32687 - 03 - PS – 003.
1
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 15NB, SCH 80 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
30
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 20NB, IBR, SCH 80 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
35
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 25NB, SCH 80 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
60
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 50NB, IBR, SCH 40 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
30
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 80NB, SCH 40 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
5
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 100NB, IBR, SCH 40 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
100
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 150NB, SCH 40 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
25
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 200NB, SCH 20 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
150
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 200NB, IBR, SCH 40 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
25
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A 106 Gr. B, API 5L GR B PSL1, 250NB, SCH 80 The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
10
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 15NB, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
70
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 20NB, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
6
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 25NB, IBR, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
180
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 25NB, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
242
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 40NB, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
5
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 50NB, IBR, SCH 10S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
60
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 50NB, SCH 10S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
220
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 80NB, SCH 10S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
35
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 150NB, SCH 40S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
70
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 200NB, SCH 10S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
10
-
-
... More
Butt welding & Fillet Welding (identified along with size / size range below - socket welding, slip on welding, branch welding) - With / without reinforcement, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, 250NB, SCH 10S The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding,cleaning, chipping, preheating, placing of wind shields and / wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports. For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforecement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rates does not cover stress releaving, radiography/Ultrasonic/DP tests. Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached. Payment for non specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
10
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A 106 Gr. B, API 5L GR B PSL1, CS PIPE, A106 GR B, SMLS, PE., 20 NB, SCH 80 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
12
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A 106 Gr. B, API 5L GR B PSL1, CS PIPE, A106 GR B, SMLS, BE., 50 NB, SCH 40 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
12
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A 106 Gr. B, API 5L GR B PSL1, CS PIPE, A106 GR B, SMLS, BE., 100 NB, SCH 40 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
66
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A 106 Gr. B, API 5L GR B PSL1, CS PIPE, A106 GR B, SMLS, BE., 150 NB, SCH 40 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
6
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A 106 Gr. B, API 5L GR B PSL1, CS PIPE, A106 GR B, SMLS, BE., 200 NB, SCH 40 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
36
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304, SMLS, PE, 15 NB, SCH 40S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
24
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304L, SMLS, PE, 25 NB, SCH 40S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
384
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304, SMLS, PE, 25 NB, SCH 40S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
24
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304L, SMLS, BE, 50 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
200
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304, SMLS, BE, 50 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
450
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 304, SMLS, BE, 80 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
18
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 312 TP 316L, SMLS, BE, 150 NB, SCH 40S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
192
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 790 UNS S31803, SMLS, PE, 25 NB, SCH 40S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
12
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 790 UNS S31803, SMLS, BE, 50 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
30
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 790 UNS S31803, SMLS, BE, 200 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
6
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: MATERIAL: A312 TP 304/304L, A312 TP 316L, A790 UNS S31803, SS PIPE, ASTM A 790 UNS S31803, SMLS, BE, 250 NB, SCH 10S The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
6
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: RUBBER LINED FLANGED PIPE, CS PIPE , API 5L Gr.B PSL 1, ERW (NON STANDARD LENGTH), 150 NB, SCH 40 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
24
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: RUBBER LINED FLANGED PIPE, CS PIPE, API 5L Gr.B PSL 1,ERW (STANDARD LENGTH, 5.5 mtr), 200 NB, SCH 20 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
572
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: RUBBER LINED FLANGED PIPE, CS PIPE , API 5L Gr.B PSL 1, ERW (NON STANDARD LENGTH), 200 NB, SCH 20 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
102
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: RUBBER LINED FLANGED PIPE, CS PIPE, API 5L Gr.B PSL 1,ERW (STANDARD LENGTH, 5.5 mtr), 250 NB, SCH 20 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
18
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10: RUBBER LINED FLANGED PIPE, CS PIPE , API 5L Gr.B PSL 1, ERW (NON STANDARD LENGTH), 250 NB, SCH 20 The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings. The work shall include transportation from owners storage point, handling, rigging, scaffolding, placing and alignment of pipe and fitting into their respective positions and on to their respective supports, hydro test, painting as per the engineering specifications provided. Fabrication and Erection of trunnion supports, installation of special items like bellows, strainers, traps, fabrication and erection of spacers etc. are also included in this rate. Hydraulic/Pneumatic testing of the piping systems, flushing draining and drying up shall also be included in the quoted rate. Sea water/ saline water shall not be used for hydrotesting and contractor shall arrange potable water for hydro testing at no extra cost. Suitable corrosion inhibiters should be added and temporary gasket shall be used at all flange joints and quoted rate shall be inclusive of rate of supply for above items. Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items. The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths. The rates does not cover stress releaving, radiography/ Ultrasonic/ DP tests. The pay quantity shall be the actual centreline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydrotesting.
36
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 20 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
4
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
20
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 40 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
2
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 50 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
34
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 80 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
13
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 100 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
22
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 150 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
4
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5 (RUBBER LINED FLANGED END PIPES), 150 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
8
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
4
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5 (RUBBER LINED FLANGED END PIPES), 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
140
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5, 250 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
4
-
-
... More
INSTALLATION OF FLANGES - FLANGE, B16.5 (RUBBER LINED FLANGED END PIPES), 250 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owners storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final aligment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. Welding of flanges are excluded from this rate and they will be paid as per schedule A. The pay quantity for the items shall be number of pairs of flanges actually completed.
25
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW,CS, 15 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
4
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW,SS, 15 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
10
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW,CS, 20 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
3
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW,CS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
9
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW,SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
28
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
7
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, CS, 50 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, SS, 50 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
5
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, SS, 80 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
3
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, CS, 100 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
8
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, SS, 150 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, CS, 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Ball Valve, FLG, SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
3
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Ball Valve, FLG, SS, 50 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
8
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Ball Valve, FLG, SS, 150 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Ball Valve, FLG, SS, 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
4
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Ball Valve, FLG, SS, 250 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
4
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Globe Valve, SW, SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Globe Valve, FLG, CS, 100 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Check Valve, SW, SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Check Valve, FLG, CS, 100 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Check Valve, FLG, SS, 50 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Check Valve, FLG, CS, 200 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Strainer, FLG, SS, 25 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Strainer, FLG, SS, 80 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Strainer, FLG, SS, 250 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Steam trap, SW, CS, 20 NB, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps, strainers etc. in the piping at all elevations. The work shall include transporatation from owners storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operationg conditions. The rate is applicable for all matls, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2. Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operationg mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed. The pay quantity shall be the no of items installed.
2
-
-
... More
Radiography / Ultrasonic / Dye penetrant / Magnetic Particles Tests - Radiographic inspection of the weld joints shall be conducted as per the code, specs. Drawings & instruction of the Engineer-in-charge. However the extent of inspection (%) shall be as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate quoted shall be inclusive of all operations necessary to fulfill the work of radiography (x-ray / gamma ray) ultrasonic, DP/MP tests including all tools / tackles, films, chemicals etc. complete. After testing, if any joint is found defective, the same shall be rectified and re-tested free of cost. The pay quantity shall be linear centimeters of weld successfully passed.
3000
-
-
... More
Radiography / Ultrasonic / Dye penetrant / Magnetic Particles Tests - DP / MP Test of the weld joints shall be conducted as per the code, specs. Drawings & instruction of the Engineer-in-charge. However the extent of inspection (%) shall be as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 25ES205 / 10. The rate quoted shall be inclusive of all operations necessary to fulfill the work of radiography (x-ray / gamma ray) ultrasonic, DP/MP tests including all tools / tackles, films, chemicals etc. complete. After testing, if any joint is found defective, the same shall be rectified and re-tested free of cost. The pay quantity shall be linear centimeters of weld successfully passed.
3700
-
-
... More
FABRICATION AND ERECTION OF STRUCTURAL SUPPORTS - Supply of material, transportation, cutting, edge preparation drilling, threading, welding and fixing of structurals supports at all elevations and chipping and grouting as required and clamping /bottling/fixing of pipeline (including the cost of sand, cement, MS plates ,chemical bolts & Structurals).Fabrication of supports such as bare pipe guide, resting shoe, guide shoe etc. including supply of materials. Refer typical support details attached.
3
-
-
... More
PAINTING - 20NB( insulated line:only primer, refer painting spec.) Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
12
-
-
... More
PAINTING - 50NB( insulated line:only primer, refer painting spec.) Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
12
-
-
... More
PAINTING - 100NB( insulated line:only primer, refer painting spec.) Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
54
-
-
... More
PAINTING - 200NB( insulated line:only primer, refer painting spec.) Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
36
-
-
... More
PAINTING - 100NB line Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
12
-
-
... More
PAINTING - 150NB line Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
30
-
-
... More
PAINTING - 200NB line Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
674
-
-
... More
PAINTING - 250NB line Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
54
-
-
... More
PAINTING OF MARKINGS – 50 NB Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
9
-
-
... More
PAINTING OF MARKINGS – 100 NB Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
3
-
-
... More
PAINTING OF MARKINGS – 150 NB Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
2
-
-
... More
PAINTING OF MARKINGS – 200 NB Supply and application of Primers/Finish Paints over pipes, valves, fittings, specials, etc. as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES023/2010, standards, drawings and instructions from the site in charge. The external surfaces of prefabricated piping sections together with attached fittings shall be cleaned by mechanical means such as mechanical wire brushes. The unit of measurement for Painting of pipeline shall be Running Meters along centreline (includes all on line fittings, valves & instr. tapping up to first isolation). Markings shall be as per the painting specification attached. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
5
-
-
... More
INSULATION – HOT INSULATION(IH), 20NB, 40MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
18
-
-
... More
INSULATION – HOT INSULATION(IH), 50NB, 30MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
200
-
-
... More
INSULATION – HOT INSULATION(IH), 50NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
12
-
-
... More
INSULATION – HOT INSULATION(IH), 80NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
6
-
-
... More
INSULATION – HOT INSULATION(IH), 100NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
54
-
-
... More
INSULATION – HOT INSULATION(IH), 200NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos. Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
36
-
-
... More
INSULATION – Flange joints-IH, 50NB, 30MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
3
-
-
... More
INSULATION – Flange joints-IH, 50NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
2
-
-
... More
INSULATION – Flange joints-IH, 80NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
2
-
-
... More
INSULATION – Flange joints-IH, 100NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
16
-
-
... More
INSULATION – Flange joints-IH, 200NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
2
-
-
... More
INSULATION – Flanged valves-IH, 50NB, 30MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
1
-
-
... More
INSULATION – Flanged valves-IH, 50NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
1
-
-
... More
INSULATION – Flanged valves-IH, 80NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
1
-
-
... More
INSULATION – Flanged valves-IH, 100NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
8
-
-
... More
INSULATION – Flanged valves-IH, 200NB, 65MM, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 02ES029/2010. Pipelines: Supply and application of hot insulation. Running metres thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer shall be included in the higher size. For branches, the measurement shall be from surface of bigger / main. Valves: Supply and application of hot insulation per valve in nos.
Flanges: Supply and application of hot insulation no. of boxes (one box per flange joint).
1
-
-
... More
RUBBER LINING OF PIPES INCLUDING FLANGE FACES AND FITTINGS – MATERIAL: API 5L GR B PSL1, 150 NB, SCH 40 , as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 03ES014/15.
Supply and application of rubberlining. The inner surface and face of flange of all fabricated pipe segments (Wet area) shall be lined and tested as per FEDO specification 03ES014. For this item only approved venders included in the sub vender list of tender documents shall be considered by the contractor.
24
-
-
... More
RUBBER LINING OF PIPES INCLUDING FLANGE FACES AND FITTINGS – MATERIAL: API 5L GR B PSL1, 200 NB, SCH 20, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 03ES014/15.
Supply and application of rubberlining. The inner surface and face of flange of all fabricated pipe segments (Wet area) shall be lined and tested as per FEDO specification 03ES014. For this item only approved venders included in the sub vender list of tender documents shall be considered by the contractor.
102
-
-
... More
RUBBER LINING OF PIPES INCLUDING FLANGE FACES AND FITTINGS – MATERIAL: API 5L GR B PSL1, 250 NB, SCH 20, as per the attached TPS no. 32687 - 03 - PS – 003/Engineering Specification 03ES014/15.
Supply and application of rubberlining. The inner surface and face of flange of all fabricated pipe segments (Wet area) shall be lined and tested as per FEDO specification 03ES014. For this item only approved venders included in the sub vender list of tender documents shall be considered by the contractor.
36
-
-
... More
DISMANTLING / REALIGNMENT OF RUBBER LINED PIPES - MATERIAL: API 5L GR B PSL1, 200NB, SCH 20.
This item includes realignment of existing rubberlined phosphoric acid pipe line through the center of the pipe rack in order to accommodate new pipelines on either side.The line is located in the pipe rack on the western side of existing NP plant and through the side of non-managerial canteen upto the battery limit. Dismantling if required is included in the scope of contractor. Labour, crain, consumables, nut and bolt, gasket,making flange joints etc required for the proper alignment of rubberlined pipe in pipe rack is included in the scope of contractor. Spool pieces if required for the proper allignement is under the scope of contractor. If spool pieces are required, rate for the supply of pipes shall be claimed under the respective item in 32687-03-PS-011 of tender document and fabrication part including welding, installation of flanges, rubberlining etc.will be paid as per schedule A, B.2 and E.3.
100
-
-
... More
Supply of pressure gauge with manifold as per data sheet 32687-14-DA-00001 (PG-601, PG-602, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
3
-
-
... More
Erection of pressure gauge with manifold as per data sheet 32687-14-DA-00001 (PG-601, PG-602, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
2
-
-
... More
Supply of pressure gauge with manifold and syphon (IBR) as per data sheet 32687-14-DA-00001 (PG-7270, PG 7269, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
3
-
-
... More
Erection of pressure gauge with manifold and syphon (IBR) as per data sheet 32687-14-DA-00001 (PG-7270, PG 7269, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
2
-
-
... More
Supply of diaphragm seal pressure gauge as per data sheet 32687-14-DA-00001 (PG-501, PG-502, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
3
-
-
... More
Erection of diaphragm seal pressure gauge as per data sheet 32687-14-DA-00001 (PG-501, PG-502, Spare). Erection scope includes proper mounting of pressure gauge with erection material as per approved hookup drawing.
2
-
-
... More
Supply of pressure transmitter with manifold as per data sheet 32687-14-DA-00002 (PT-7270, PT-7269, Spare). Erection scope includes fabrication of stanchion including necessary civil works (if required), proper mounting as per hookup drawing with all accessories and erection materials, glanding, termination, testing, providing canopy, loop checking etc.
3
-
-
... More
Erection of pressure transmitter with manifold as per data sheet 32687-14-DA-00002 (PT-7270, PT-7269, Spare). Erection scope includes fabrication of stanchion including necessary civil works (if required), proper mounting as per hookup drawing with all accessories and erection materials, glanding, termination, testing, providing canopy, loop checking etc.
2
-
-
... More
Supply of pressure control valve as per attached data sheet 32687-14-DA-00003 (PCV-7270) along with spares as per Spares list 32687-03-PS-003 SPR INST. Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here for erection is for tubing, glanding and termination, stroke testing/ adjustments and loop checking only).
1
-
-
... More
Erection of pressure control valve as per attached data sheet 32687-14-DA-00003 (PCV-7270) along with spares as per Spares list 32687-03-PS-003 SPR INST. Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here for erection is for tubing, glanding and termination, stroke testing/ adjustments and loop checking only).
1
-
-
... More
Supply of temperature control valve as per attached data sheet 32687-14-DA-00003 (TCV-7270) along with spares as per Spares list 32687-03-PS-003 SPR INST.Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here for erection is for tubing, glanding and termination, stroke testing/ adjustments and loop checking only). NOTE: As per the desuperheater vendor design, if the TCV is an integral part of desuperheater, this item need not be supplied and the rate for same will be covered under the desuperheater rate specified in mechanical SOR.
1
-
-
... More
Erection of temperature control valve as per attached data sheet 32687-14-DA-00003 (TCV-7270) along with spares as per Spares list 32687-03-PS-003 SPR INST.Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here for erection is for tubing, glanding and termination, stroke testing/ adjustments and loop checking only). NOTE: As per the desuperheater vendor design, if the TCV is an integral part of desuperheater, this item need not be supplied and the rate for same will be covered under the desuperheater rate specified in mechanical SOR.
1
-
-
... More
Supply of pressure regulating valve as per attached data sheet 32687-14-DA-00004 (PRV-7269) along with spares as per Spares list 32687-03-PS-003 SPR INST.Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here is for set point adjustment etc as per data sheet & instruction of SIC.
1
-
-
... More
Erection of pressure regulating valve as per attached data sheet 32687-14-DA-00004 (PRV-7269) along with spares as per Spares list 32687-03-PS-003 SPR INST.Erection scope includes proper mounting as per hook-up drawings or as per the instruction of SIC. (Mechanical erection by mech contractor under this tender. Rate considered here is for set point adjustment etc as per data sheet & instruction of SIC.
1
-
-
... More
Supply of temperature element with thermowell assembly as per data sheet 32687-14-DA-00005. Erection scope includes proper mounting as per hookup drawings, glanding, termination (Interfacing with associated transmitter using triad cable), testing, providing canopy etc.
1
-
-
... More
Erection of temperature element with thermowell assembly as per data sheet 32687-14-DA-00005. Erection scope includes proper mounting as per hookup drawings, glanding, termination (Interfacing with associated transmitter using triad cable), testing, providing canopy etc.
1
-
-
... More
Supply of temperature transmitter as per attached data sheet 32687-14-DA-0006. Erection scope includes proper mounting as per hook-up drawings, glanding, termination (Interfacing with associated temperature element), testing, providing canopy etc.
1
-
-
... More
Erection of temperature transmitter as per attached data sheet 32687-14-DA-0006. Erection scope includes proper mounting as per hook-up drawings, glanding, termination (Interfacing with associated temperature element), testing, providing canopy etc.
1
-
-
... More
Supply of temperature gauge as per data sheet 32687-14-DA-0007. Erection scope includes proper mounting of temperature gauge with erection material as per approved hook-up drawing.
1
-
-
... More
Erection of temperature gauge as per data sheet 32687-14-DA-0007. Erection scope includes proper mounting of temperature gauge with erection material as per approved hook-up drawing.
1
-
-
... More
Supply of integral orifice assembly with differential pressure transmitter as per data sheet 32687-14-DA-00008 (FE 7269) & 32687-14-DA-00009 (FT 7269). Erection scope includes proper mounting of integral orifice assembly with erection material as per approved hook-up drawing, glanding, termination. testing, providing canopy etc. (Mechanical erection of integral orifice assembly by mech contractor under this tender).
1
-
-
... More
Erection of integral orifice assembly with differential pressure transmitter as per data sheet 32687-14-DA-00008 (FE 7269) & 32687-14-DA-00009 (FT 7269). Erection scope includes proper mounting of integral orifice assembly with erection material as per approved hook-up drawing, glanding, termination. testing, providing canopy etc. (Mechanical erection of integral orifice assembly by mech contractor under this tender).
1
-
-
... More
Supply of cable- 1 pair twisted 1.5 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 32687-14-DA-00010 attached in the tender document Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
100
-
-
... More
Erection of cable- 1 pair twisted 1.5 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 32687-14-DA-00010 attached in the tender document Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
100
-
-
... More
Supply of cable- 12 pair twisted 1.0 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 32687-14-DA-00010 attached in the tender document (AAA). Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
450
-
-
... More
Erection of cable- 12 pair twisted 1.0 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 32687-14-DA-00010 attached in the tender document (AAA). Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
450
-
-
... More
Supply of cable- 1 Triad twisted 1.5 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 8165-14-DA-00010 attached in the tender document (T). Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
100
-
-
... More
Erection of cable- 1 Triad twisted 1.5 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet no 8165-14-DA-00010 attached in the tender document (T). Scope of erection includes transportation of cable drum to site, using cable puller and unwinding, laying without twists, laying through tray etc as per the instruction of SIC.
100
-
-
... More
Supply of 12 inlet Junction box with cable gland and / or plug as per data sheet 32687-14-DA-000012. Erection scope includes mounting of junction box on stanchion with necessary structural works as per drawings or as per instruction of SIC, fixing of canopy, cable glanding, termination, painting, earthing, testing etc.
1
-
-
... More
Erection of 12 inlet Junction box with cable gland and / or plug as per data sheet 32687-14-DA-000012. Erection scope includes mounting of junction box on stanchion with necessary structural works as per drawings or as per instruction of SIC, fixing of canopy, cable glanding, termination, painting, earthing, testing etc.
1
-
-
... More
Supply of 1/2" NPT type double compression cable glands suitable for armoured cables as per data sheet 32687-14-DA-00013. (Separate erection rates not applicable and shall be quoted along with associated instrument/ cable laying itself).
3
-
-
... More
Supply of 1 1/4" NPT type double compression cable glands suitable for armoured cables as per data sheet 32687-14-DA-00013. (Separate erection rates not applicable and shall be quoted along with associated instrument/ cable laying itself).
1
-
-
... More
Supply and erection of 1/2" NPT type plugs as per data sheet 32687-14-DA-00013. (Separate erection rates not applicable and shall be quoted along with associated instrument/ cable laying itself).
1
-
-
... More
Supply of 50 mm wide perforated FRP cable tray with cover as per data sheet. Scope of erection includes necessary fabrication works with tray, laying of tray etc as per instruction of EIC.
250
-
-
... More
Erection of 50 mm wide perforated FRP cable tray with cover as per data sheet. Scope of erection includes necessary fabrication works with tray, laying of tray etc as per instruction of EIC.
250
-
-
... More
Supply of OET Nipple, 1/2" PLAIN x 1/2" NPT(M), ASTMA312 TP304, Sch 80S (Erection of these items to be quoted under respective instruments/ associated instruments).
3
-
-
... More
Supply of OET Nipple, IBR, 1/2" PLAIN x 1/2" NPT(M) , SS316,Sch 80S (Erection of these items to be quoted under respective instruments/ associated instruments).
3
-
-
... More
Supply of Female connector, 1/2" NPT(F) x 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
3
-
-
... More
Supply of Tube, 12 mm OD x 1.5 mm thickness, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
24
-
-
... More
Supply of Union Tee, 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
5
-
-
... More
Supply of Tube cap, 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
5
-
-
... More
Supply of Union, 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
4
-
-
... More
Supply of Needle valve with union, 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
3
-
-
... More
Supply of Male connector, 1/2" NPT(M) x 12 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
5
-
-
... More
Supply of Male connector, 1/4" NPT(M) x 6 mm OD double compression type, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
5
-
-
... More
Supply of Female connector, 1/2" NPT(F) x 6 mm OD double compression type, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
5
-
-
... More
Supply of Tube, 6 mm OD x 1mm thickness, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
24
-
-
... More
Supply of Tube union, 6 mm OD, SS316 (Erection of these items to be quoted under respective instruments/ associated instruments).
4
-
-
... More
Supply of structural steel including ISA50X50X6, ISA65X65X6, Flat 50X6, ISMC 100 for cable tray support and JB/ Panel mounting, 2" SCH40 MS pipe for providing stanchion for junction box, for cable conduit, 10 mm thick MS plate for mounting junction box/ Instrument support etc (Actual requirement shall be assessed at site before supply).
1
-
-
... More
Erection of structural steel including ISA50X50X6, ISA65X65X6, Flat 50X6, ISMC 100 for cable tray support and JB/ Panel mounting, 2" SCH40 MS pipe for providing stanchion for junction box, for cable conduit, 10 mm thick MS plate for mounting junction box/ Instrument support etc (Actual requirement shall be assessed at site before supply).
1
-
-
... More
Supply for Integration of DM water Pump related signals to SAP DCS. Scope includes Supply of suitable cable gland, Glanding of cable at marshalling panel end (if required), ferruling, termination etc as per instruction of site in charge, loop checking etc.
2
-
-
... More
Erection for Integration of DM water Pump related signals to SAP DCS. Scope includes Supply of suitable cable gland, Glanding of cable at marshalling panel end (if required), ferruling, termination etc as per instruction of site in charge, loop checking etc.
2
-
-
... More
Supply for Integration of PA pump Run indication to PA terminal technician room. Supply scope includes ET type cable glands and miscellaneous hardware such as ferrules, terminals etc. The scope includes, drilling and glanding of cable at panel end, ferruling, termination etc as required and providing necessary indications in existing annunciator window (as per instruction of site in charge) labelling, loop checking etc.
4
-
-
... More
Erection for Integration of PA pump Run indication to PA terminal technician room. Supply scope includes ET type cable glands and miscellaneous hardware such as ferrules, terminals etc. The scope includes, drilling and glanding of cable at panel end, ferruling, termination etc as required and providing necessary indications in existing annunciator window (as per instruction of site in charge) labelling, loop checking etc.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements