The Fertilisers And Chemicals Travancore Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
New Steam Line For Transporting Steam From So2 Acid Plant To Steam Header In Pd, Udyogamandal
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_FACT_841044_1Tender No
05061/2024-2025/E30633Tender Authority
The Fertilisers And Chemicals Travancore Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Butt welding - 65NB-100 NB, BW, SCH 80 - MATERIAL: CARBON ST A 106 Gr. B, IBR. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding, cleaning, chipping, preheating, placing of wind shields and /wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports.
For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforcement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld.
The rates does not cover stress releaving, radiography/Ultrasonic/DP tests.
Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached.
Payment for non-specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
35
-
-
... More
Socket Welding - 40 NB, SW, SCH 80/SCH160 - MATERIAL: CARBON ST A 106 Gr. B, IBR. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding, cleaning, chipping, preheating, placing of wind shields and /wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports.
For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforcement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld.
The rates does not cover stress relieving, radiography/Ultrasonic/DP tests.
Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached.
Payment for non-specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
15
-
-
... More
Socket Welding - 20 NB, SW, SCH 80/SCH160 - MATERIAL: CARBON ST A 106 Gr. B, IBR. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding, cleaning, chipping, preheating, placing of wind shields and /wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports.
For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforcement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld.
The rates does not cover stress relieving, radiography/Ultrasonic/DP tests.
Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached.
Payment for non-specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
700
-
-
... More
Socket Welding - 15 NB, SW, SCH 80/SCH160 - MATERIAL: CARBON ST A 106 Gr. B, IBR. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinar pipe weld. The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding, cleaning, chipping, preheating, placing of wind shields and /wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports.
For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforcement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld.
The rates does not cover stress relieving, radiography/Ultrasonic/DP tests.
Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached.
Payment for non-specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
5
-
-
... More
Butt welding & Socket Welding - 20 NB-50NB, SW/BW, SCH 80 - MATERIAL: SS. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld. The rate for weld joint shall include all costs associated with making a joint such as cleaning, marking out, cutting, profiling, beveling, grinding, aligning, fitting, up, tack welding, cleaning, chipping, preheating, placing of wind shields and /wind or weather protection and final welding together with any special welding requirement (including but not limited to inert gas welding) and final cleaning of welds. This item shall include preparation, final alignment, butt / seal / socket fillet welding of fabricated pipe sections, spool pieces, fitting valves, flanges / orifice flanges etc. and closing length installed and roughly aligned into the respective position and align on respective supports.
For branch welding with reinforcement, the rate shall include all costs towards fabrication and welding of reinforcement ring also. Branch welding without reinforcement pad shall be considered as one pipe weld. Rate for branch welding with reinforcement pad shall be taken as 1.5 times the rate for ordinary pipe weld.
The rates does not cover stress relieving, radiography/Ultrasonic/DP tests.
Payment shall be made on the basis of number of weld joints completed. Welding of sockolets, weldolets, threadolets and such fittings shall be paid according to the size of the fitting and not according to the size of the piping to which it is attached.
Payment for non-specified sizes/thickness will be made propotional to the product of nominal bore and thickness of the pipe based on the nearest available size / thickness.
20
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 300 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings.
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
1960
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 250 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
30
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 150 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
75
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 65-100 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
30
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 40 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
6
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 20 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
285
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 15 NB, CS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
6
-
-
... More
INSTALLATION OF STRAIGHT OR FABRICATED PIPE - 20 NB-50NB, SS PIPE The rate covers all the works required for the proper installation, above ground / in trenches of all types of carbon steel, IBR, Alloy Steel and Stainless steel piping and prefabricated piping sections including, steam/condensate manifolds together with attached fittings.
The work shall include transportation from owner’s storage point, handling, rigging, scaffolding, placing and alignment of pipe and fittings into their respective positions and on to their respective supports.
Fabrication and erection of trunnion supports, installation of special items like bellows, strainers, traps, etc. are also included in this rate. Hydraulic/pneumatic testing of the piping systems, flushing, draining and drying up shall also be included in the quoted rate.
Excluded from this item shall be installation of pipe supports other than trunnions, installation of hangers, making of flanged connections, installation of valves, control valves etc., and any other item specifically exempted and paid for under separate bid items.
The contractor shall make the most economical use of straight pipe length in the fabrication and field erection of straight piping runs and closing lengths.
The pay quantity shall be the actual centerline length in meters, of straight or fabricated pipe excluding pipe supports, valves, control valves etc. actually installed or required. Payment for the work done will be made only when the piping is properly located and permanently supported in its final position in the field after hydro testing.
30
-
-
... More
INSTALLATION OF FLANGES - 300 NB FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
13
-
-
... More
INSTALLATION OF FLANGES - 250 NB FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
8
-
-
... More
INSTALLATION OF FLANGES - 150 NB FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
48
-
-
... More
INSTALLATION OF FLANGES - 100 NB FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
8
-
-
... More
INSTALLATION OF FLANGES - 65, 80 NB FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
2
-
-
... More
INSTALLATION OF FLANGES - 40 NB, FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
5
-
-
... More
INSTALLATION OF FLANGES - 20 NB, FLANGE, B16.5 The work under this item covers all operations necessary to complete a flanged joint and shall include transportation from owner’s storage point, handling, cleaning and preparation of flange faces and gaskets, placing, aligning, installation of gaskets, bolts/studs, final alignment and tightening of pipe flanges, orifice flanges, blind flanges, expansion joint flanges flanged valves and fittings etc. at all elevations. Installation of orifices, spades, blinds are also included in the quoted rate. The rate is applicable for all ratings and materials. The pay quantity for the items shall be number of pairs of flanges actually completed.
50
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, CS, 300 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
4
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Check Valve , FLG, CS, 300 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Pressure Safety Valve , FLG, CS, 65 NB X 150NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Motor operated gate valve, 300 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Globe Valve , FLG, CS, 250 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - CONTROL VALVE, 250 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - CONTROL VALVE, 100 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Motor operated gate valve, 150 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , FLG, CS, 100 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - 100 NB, Globe Valve , FLG, CS The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW, CS, 20 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
142
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Gate Valve , SW, CS, 15 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
2
-
-
... More
INSTALLATION OF VALVES, FLOW METERS ETC. - Orifice flange/orifice plate, 300 NB The rate covers all works required to install all on-line items like valves, control valves, safety valves, flowmeters, steam taps etc. in the piping at all elevations. The work shall include transportation from owner’s storage point. handling, rigging, lifting, placing & final alignment of valves in to their Respective positions & orientation to suit operating conditions. The rate is applicable for all materials, types & rating. Welding and making of flanged connections are excluded from this rate and they will be paid as per schedule A & B.2
Also included under this items shall be any work required to ensure the initial satisfactory operation of the valve including minor gland / plud adjustments, lubrication and minor adjustments to the operating mechanism. After erection in place, the valves shall be fully opened and then, after ensuring free movement, shall be closed.
The pay quantity shall be the no of items installed.
1
-
-
... More
Radiographic Inspection Radiographic inspection of the weld joints shall be conducted as per the code, specs. Drawings & instruction of the Engineer-in-charge. However, the extent of inspection (%) shall be as per attached document REF:25ES205
The rate quoted shall be inclusive of all operations necessary to fulfill the work of radiography (x-ray / gamma ray) inspection including all tools / tackles, films, chemicals etc. complete. After testing, if any joint is found defective, the same shall be rectified and re-tested free of cost.
The pay quantity shall be linear centimeters of weld successfully passed.
22430
-
-
... More
Dye Penetrant / Magnetic Particles Tests DP/MP inspection of the weld joints shall be conducted as per the code, specs. Drawings & instruction of the Engineer-in-charge. However, the extent of inspection (%) shall be as per attached document REF:25ES205
The rate quoted shall be inclusive of all operations necessary to fulfill the work DP/MP tests including all tools / tackles, films, chemicals etc. complete. After testing, if any joint is found defective, the same shall be rectified and re-tested free of cost.
The pay quantity shall be linear centimeters of weld successfully passed.
11220
-
-
... More
MISCELLANEOUS WORKS- FABRICATION AND ERECTION OF STRUCTURAL SUPPORTS
Supply of material, transportation, cutting, edge preparation drilling, threading, welding and fixing of structural supports at all elevations and chipping and grouting as required and clamping /bottling/fixing of pipeline (including the cost of sand, cement, MS plates, chemical bolts & Structural)
1
-
-
... More
SUPPLY AND INSTALLATION OF PIPE SHOES, CLAMPS, ROD HANGERS ETC. - SHOE SUPPORT Transportation from owner’s store, installation etc. are included.
Fabrication of supports including supply of materials. Actual quantity based on approved for construction drawing refer attached support standard for details
300
-
-
... More
SUPPLY AND INSTALLATION OF PIPE SHOES, CLAMPS, ROD HANGERS ETC. - GUIDE SUPPORT Transportation from owner’s store, installation etc. are included.
Fabrication of supports including supply of materials. Actual quantity based on approved for construction drawing refer attached support standard for details.
150
-
-
... More
SUPPLY AND INSTALLATION OF PIPE SHOES, CLAMPS, ROD HANGERS ETC. - AXIAL STOP Transportation from owner’s store, installation etc. are included.
Fabrication of supports including supply of materials. Actual quantity based on approved for construction drawing refer attached support standard for details.
20
-
-
... More
SUPPLY AND INSTALLATION OF PIPE SHOES, CLAMPS, ROD HANGERS ETC. - VARIABLE SPRING SUPPORT WITH ALL ANCILLARIES Transportation from owner’s store, installation etc. are included.
Fabrication of supports including supply of materials. Actual quantity based on approved for construction drawing refer attached support standard for details.
2
-
-
... More
PAINTING - 300NB( insulated line:only primer, refer painting spec.) The unit of measurement for Painting of pipeline shall be Running Meters along centerline (includes all on line fittings, valves & instr. tapping up to first isolation).
Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made
1900
-
-
... More
PAINTING - 300NB, NUMBER OF MARKINGS The unit of measurement is number of markings (Markings includes 2M long ground color, Color Band(s), Line identification no. & Flow direction arrow).
For painting the marking on insulated, SS, Gl and Cl lines, the unit shall be Per Marking. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
20
-
-
... More
PAINTING - 100NB, NUMBER OF MARKINGS The unit of measurement is number of markings (Markings includes 2M long ground color, Color Band(s), Line identification no. & Flow direction arrow).
For painting the marking on insulated, SS, Gl and Cl lines, the unit shall be Per Marking. Painting of pipe supports (includes base springs, Hanger springs, shoes & trunnions and excludes pipe bridge structures, platforms, eqpt. support structures & such structures which does not actually support the pipeline) forms part of the pipeline and no separate payment shall be made.
2
-
-
... More
INSULATION - HOT INSULATION(IH) - 300NB Line, 180MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
1900
-
-
... More
INSULATION - HOT INSULATION(IH) - 250NB Line, 180MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
30
-
-
... More
INSULATION - HOT INSULATION(IH) - 150NB Line, 100MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
75
-
-
... More
INSULATION - HOT INSULATION(IH) - 100NB Line, 100MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
30
-
-
... More
INSULATION - HOT INSULATION(IH) - 40NB Line, 75MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
10
-
-
... More
INSULATION - HOT INSULATION(IH) - 20NB Line, 75MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
290
-
-
... More
INSULATION - HOT INSULATION(IH) - 15NB Line, 75MM Insulation Thk Pipelines: Running meters thru centerline (includes all on-line pipe fittings, valve lengths and instrument tappings up to first isolation valve). Any on-line reducer Shall be included in the higher size.
For branches, the measurement Shall Be from surface of bigger / main pipe.
10
-
-
... More
INSULATION - Number of flange joints-IH - 300NB Line, 180MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
13
-
-
... More
INSULATION - Number of flange joints-IH - 250NB Line, 180MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
8
-
-
... More
INSULATION - Number of flange joints-IH - 150NB Line, 100MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
48
-
-
... More
INSULATION - Number of flange joints-IH - 100NB Line, 100MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
8
-
-
... More
INSULATION - Number of flange joints-IH - 80NB Line, 100MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
2
-
-
... More
INSULATION - Number of flange joints-IH - 40NB Line, 75MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
5
-
-
... More
INSULATION - Number of flange joints-IH - 20NB Line, 75MM Insulation Thk Flanges: no. of boxes (one box per flange joint)
Valves : flanged valves will be considered as two flange joints and valve length will be considered in pipe running meter
50
-
-
... More
DISMANTLING OF EXISTING PIPING/STRUCTURALS - CS/SS PIPE, SIZE 25NB-250NB
Cutting and dismantling of existing pipe lines/ structural including pipe supports, valves fittings online instruments insulation, hydrants, monitors etc. from all elevations as directed by engineer in-charge, transporting materials to the owner stores, yard or other points as indicated, without damage/obstruction to nearby equipment, structures and piping in a safe and sound manner.
50
-
-
... More
DISMANTLING OF AIR BLOWER
The rate covers all works required to dismantle and relocate the air blower to safe-location as instructed by FACT engineer in-charge
1
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
300 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
1938
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
250 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
30
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
150 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
75
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
100 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
28
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
80 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
2
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
65 NB, CS SA-106 Gr B, SMLS, BE Ends, ASME B 36.10, SCH 80, IBR: YES
2
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
40 NB, CS SA-106 Gr B, SMLS, PE Ends, ASME B 36.10, SCH 80, IBR: YES
6
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
20 NB, CS SA-106 Gr B, SMLS, PE Ends, ASME B 36.10, SCH 80, IBR: YES
285
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
15 NB, CS SA-106 Gr B, SMLS, PE Ends, ASME B 36.10, SCH 80, IBR: YES
6
-
-
... More
Supply of Pipes as per 32756-03-PS-002:
20 NB, SS A312 TP304, SMLS, PE Ends, ASME B 36.19 SCH 40S, IBR: NO
24
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
300 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
13
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
250 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
8
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
150 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
52
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
100 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
4
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
80 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
2
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
65 NB, Weld Neck, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
2
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
40 NB, Socket Weld, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
8
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
20 NB, Socket Weld, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
100
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
150 NB, Blind Flange, SA-105, Raised Face, SCH 80, ASME B16.5 600#, IBR: YES
44
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
20 NB, Socket Weld, A182 Gr F304, Raised Face, SCH 40, ASME B16.5 150#, IBR: NO
2
-
-
... More
Supply of Flanges as per 32756-03-PS-003:
20 NB, Blind Flange, A182 Gr F304, Raised Face, ASME B16.5 150#, IBR: NO
2
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
300NB, 90LR Elbow, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
295
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
300NB, 45LR Elbow, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
4
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
250NB, 90LR Elbow, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
6
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
150NB, 90LR Elbow, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
9
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
100NB, 90LR Elbow, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
8
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
100NB, Equal Tee, SA-234-WPB, SMLS, BE Ends, SCH 80, IBR: YES
1
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB, CAP, SA-105, Forged, Socket Weld, 3000#, IBR: YES
25
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB, 90LR Elbow, SA-105, Forged, Socket Weld, 3000#, IBR: YES
218
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB, Equal Tee, SA-105, Forged, Socket Weld, 3000#, IBR: YES
49
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
40NB, Half Coupling, SA-105, Forged, Socket Weld, 3000#, IBR: YES
5
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB, Half Coupling, SA-105, Forged, Socket Weld, 3000#, IBR: YES
75
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB, Half Coupling, SA-105, Forged, Socket Weld, 3000#, IBR: YES
2
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB Nipple, Length: 200mm, SA-53 GR. B, Forged, Both End Plain, SCH 160, IBR: YES
82
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB Nipple, SA-53 GR. B, Forged, Both End Plain, SCH 80, IBR: YES
4
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB Nipple, Length: 200mm, SA-53 GR. B, Forged, Both End Plain, SCH 160, IBR: YES
4
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB Nipple, Length; 200mm, SA-53 GR. B, Forged, One End Threaded, SCH 160, IBR: YES
4
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
20NB, 90LR Elbow, A182 Gr f304, Forged, Socket Weld, 3000#, IBR: NO
10
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB NIPPLE, A 312 TP 304, SMLS, Both End Plain, SCH 80, IBR: NO
3
-
-
... More
Supply of Fittings as per 32756-03-PS-004:
15NB NIPPLE, A 312 TP 304, SMLS, One End Threaded, SCH 80, IBR: NO
3
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Unequal Tee, SA-234-WPB, SMLS, Bevelled Ends, ASME B16.9, Big End: 300NB SCH 80, Small End: 250NB SCH 80, IBR: YES
4
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Eccentric Reducer, SA-234-WPB, SMLS, Bevelled Ends, ASME B16.9, Big End: 300NB SCH 80, Small End: 250NB SCH 80, IBR: YES
4
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Eccentric Reducer, SA-234-WPB, SMLS, Bevelled Ends, ASME B16.9, Big End: 300NB SCH 80, Small End: 150NB SCH 80, IBR: YES
1
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Eccentric Reducer, SA-234-WPB, SMLS, Bevelled Ends, ASME B16.9, Big End: 100NB SCH 80, Small End: 80NB SCH 80, IBR: YES
1
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Eccentric Reducer, SA-234-WPB, SMLS, Bevelled Ends, ASME B16.9, Big End: 150NB SCH 80, Small End: 80NB SCH 80, IBR: YES
1
-
-
... More
Supply of Reduced Fittings as per 32756-03-PS-004:
Unequal Tee, A182 Gr f304, Forged, Socket Weld, ASME B16.11 Big End: 3000# 20NB, Small End: 3000# 15NB, IBR: NO
3
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 300NB, ASME B16.20, 4.5 mm Thk.
28
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 250NB, ASME B16.20, 4.5 mm Thk.
16
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 150NB, ASME B16.20, 4.5 mm Thk.
74
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 100NB, ASME B16.20, 4.5 mm Thk.
8
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 80NB, ASME B16.20, 4.5 mm Thk.
4
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 65NB, ASME B16.20, 4.5 mm Thk.
4
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 40NB, ASME B16.20, 4.5 mm Thk.
10
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 600# ASME B 16.5
Gasket: 20NB, ASME B16.20, 4.5 mm Thk.
70
-
-
... More
Supply of Gaskets as per 32756-03-PS-005:
SPIRAL WOUND, SS 316 GRAFOIL FILLED WITH INNER(IR), OUTER RING(OR), IR=304-SS /OR=CS,
To suit Flange: Raised Face, 150# ASME B 16.5
Gasket: 20NB, ASME B16.20, 4.5 mm Thk.
4
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M33, Length: 220 mm
322
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M33, Length: 215 mm
148
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M24, Length: 170 mm
683
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M22, Length: 145 mm
32
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M22, Length: 125 mm
16
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M20, Length: 120 mm
19
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M20, Length: 110 mm
23
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: SA193GR.B7 - STUD, Nut: SA194GR.2H - HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M16, Length: 90 mm
203
-
-
... More
Supply of Bolts & Nuts as per 32756-03-PS-006:
Bolt: A193 Gr B8 - STUD, Nut: A194 Gr B8- HEX NUT, Threading Std: As per 03ES306/10
Bolt Dia: M12, Length: 65 mm
8
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-210, 300 NB GATE VALVE-SA-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y/G-OPR
4
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: CHV-101, 300 NB CHECK VALVE-SA-216-WCB ANSI 600 RF-SM13CRTR/S&D-STLT BC-SWING
1
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GLV, 250 NB GLOBE VALVE A-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y
1
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GLV, 250 NB GLOBE VALVE A-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y
2
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: MOV-04, 150 NB GATE VALVE-SA-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y, MOV
1
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-210, 100 NB GATE VALVE-SA-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y
1
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GLV-210, 100 NB GLOBE VALVE A-216-WCB ANSI 600 RF-SM13CR-TR/S&DSTLT BB-OS&Y
1
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-201, 20 NB GATE VALVE-A-105 CMPCT 800SW 13CR-TR/S&D-STLT BBOS&Y
142
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-201, 15 NB GATE VALVE-A-105 CMPCT 800SW 13CR-TR/S&D-STLT BBOS&Y
2
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-202, Gate Valve, BODY - A 182 F 304, TRIM – SS 304, 800#, 20 NB
2
-
-
... More
Supply of Valves as per 32756-03-PS-007:
Tag No: GAV-202, Gate Valve, BODY - A 182 F 304, TRIM – SS 304, 800#, 15 NB
3
-
-
... More
Supply of Steam Traps as per 32756-03-PS-010:
Item No: ST-001, STEAM TRAP, SW, A105 ANSI600 RF-SM W/STRAINER FOR HIGH PRES, 20NB
50
-
-
... More
Supply of Pressure Safety Valves with Tag no. PSV-990/991 as per 32756-11-PSV-001.
3
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
158
-
-
... More
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
158
-
-
... More
Disposal of earth by mechanical transport including loading, transporting, unloading to approved dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge.
218
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers’ not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
5
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq. m on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 3.0 m, as directed by Engineer-in-charge - For all kinds of soil
2254
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sq. m on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - For all kinds of soil
4
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
2040
-
-
... More
Providing hard core layer of 200 mm thickness using 40mm nominal size graded hard granite broken stones after compacting the underlying soil, spreading and levelling the stones and then spreading a layer of 6mm downgraded crushed aggregates on top of the broken metal layer and it shall be watered in order to force the crushed fine aggregates into the void spaces of the broken stone and repeat the process till all the voids are filled with crushed fine aggregates right up to the edges of hard core layer, including cost of all materials and labour charges etc., complete.
10
-
-
... More
Providing and laying in position cement concrete of grade 1:4:8 (1 Cement: 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level
40
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: - Cement content considered in this item is @ 400 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) - For all works below Plinth Level
5
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: - Cement content considered in this item is @ 400 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) - For all works above Plinth Level
5
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge. (Note: - Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable separately) – for all works below plinth level
190
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge. (Note: - Cement content considered in this item is @ 340 kg/cum. Excess cement used as per design mix is payable separately) – or all works above plinth level
12
-
-
... More
Reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size) work at all levels, excluding cost of centering, shuttering, finishing and reinforcement & including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge.
5
-
-
... More
Carriage of RCC precast structures from within the premises of FACT-UC to the specified locations of pipe sleepers as indicated in the GFC drawings, with a maximum travel distance of 3km.
2
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
10900
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
350
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for plinth beams, girders, bressumers and cantilevers
18
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
760
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels - Thermo-Mechanically Treated bars of grade Fe500D or more.
12620
-
-
... More
Supply, fabrication and erection of structural steel work in built up sections, bolted or welded at all levels with MS angles, channels, tees, flats, RSJs, rods, and plates for pipe supports, pipe racks, grating supports, etc. including cutting, welding, hoisting, erecting in position with necessary MS bolts including preparation of surface by grit/shot blasting. The rate shall include erecting necessary scaffolding works wherever required and covering working area during blast cleaning with tarpaulin of good quality to prevent spreading of dust and Preparation of surface and Painting of the structural steel (Painting shall be as mentioned in "Specific requirements of work".)
25820
-
-
... More
Steel work in built up (Hot finished welded type tubes) tubular sections (round, square or rectangular hollow tubes etc.) etc., including cutting, welding, hoisting, erecting in position with necessary MS bolts including preparation of surface by grit/shot blasting. The rate shall include erecting necessary scaffolding works wherever required and covering working area during blast cleaning with tarpaulin of good quality to prevent spreading of dust and Preparation of surface and Painting of the structural steel (Painting shall be as mentioned in "Specific requirements of work".)
4800
-
-
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1178
-
-
... More
Supplying and fixing mechanical anchor bolts of FISCHER/HILTI or equivalent etc. for anchoring the structural members to existing concrete column/beam as per manufactures specification. etc. complete to lines and levels at all levels with 12mm dia. Bolts
80
-
-
... More
Supplying and fixing chemical anchor bolts of FISCHER/HILTI or equivalent etc. for anchoring the structural members to existing concrete column/beam as per manufactures specification. etc. complete to lines and levels at all levels with 12mm dia. bolts (G M12 x 1000 8.8 zp OR HIT-V Threaded rod or equivalent) fixed with FIS EM Plus 390 S of FISCHER / Re500 V4 adhesive of HILTI or equivalent
300
-
-
... More
Supplying and grouting pockets, base plates, etc. at all levels for static equipments /structural steel supports using non shrink grout
2
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge.
5
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.
250
-
-
... More
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters’ lead as per direction of Engineer-in-charge.
5
-
-
... More
Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose dust and applying rust removal solution "Reebaklens RR" by M/s FOSROC Chemicals or equivalent by using brush/spray application, leaving the surfaces for at least 15 to 30 minutes, then removing the loose materials by scrubbing or with brush and applying epoxy bond to the old concrete surface before applying Polymer repair mortar.
20
-
-
... More
Supply and application of anti-corrosive chemicals with one or more coats of "NITO Zinc Primer" by M/s FOSROC Chemicals or equivalent over the exposed steel reinforcement as per manufactures specification including removing the rust, scales with wire brush/emery cloth or by mechanical buffing wheel/air and water jet etc. at all heights including all materials and labour charge as per the instruction of Engineer in charge (EiC)
20
-
-
... More
Providing and laying 25 mm average thick polymer modified latexmortar like "RENDROC SP40" of M/S FOSROC chemicals or equivalent with poly propylene fibers as per the manufacturers specification over the concrete surface roughened by chipping followed by water jetting including filling the crevices/ undulations flushing with adjacent surface curing etc., concrete at all heights including all material and labour charges and all as directed by EiC. And curing the surface by spraying water curing compound, "Concure WB" manufactured by M/s FOSROC Chemicals or equivalent.
20
-
-
... More
Supply of pressure gauge with accessories as per data sheet and hook-up drawing attached.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
3
-
-
... More
Erection of pressure gauge with accessories as per data sheet and hook-up drawing attached. Scope of erection includes Necessary welding if required and proper mounting of all accessories.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
2
-
-
... More
Supply of pressure transmitter as per data sheet and hook-up drawing attached.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
4
-
-
... More
Erection of pressure transmitter as per data sheet and hook-up drawing attached. Erection scope includes the mounting of pressure transmitter on stanchion, canopy, piping/ tubing, cabling, glanding, termination, calibration, loop check assistance to client etc.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
3
-
-
... More
Supply of Temperature gauge with thermowell as per data sheet.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
3
-
-
... More
Erection of Temperature gauge with thermowell as per data sheet. Erection scope includes proper mounting of gauge with erection material as per hook-up drawing provided.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
2
-
-
... More
Supply of Thermocouple with thermowell as per data sheet and hook-up drawing attached.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
4
-
-
... More
Erection of Thermocouple with thermowell as per data sheet and hook-up drawing attached. Scope of erection includes mounting of thermowell and element as per hook-up drawing/ drawing prepared by contractor and approved by PMC, cable laying between thermocouple and transmitter.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
3
-
-
... More
Supply of temperature transmitter as per datasheet and hook-up drawing attached.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
4
-
-
... More
Erection of temperature transmitter as per datasheet and hook-up drawing attached. Erection scope includes the mounting of temperature transmitter onstanchion, canopy, cabling, glanding, termination, calibration, loop check assistance to client etc.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
3
-
-
... More
Supply of orifice with accessories as per attached data sheet as per the hook-up drawing attached. Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Erection of orifice with accessories including piping / tubing to transmitter as per the hook-up drawing attached. (The erection of this item shall be by contractor's piping counterpart and instrument scope is to supply the items and coordinate with piping and supervise the erection till first isolation valve and balance piping/ tubing till the transmitter.) Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Supply of Flow transmitter (DP type) as per data sheet and hook-up drawing attached.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
2
-
-
... More
Erection of Flow transmitter (DP type) as per data sheet and hook-up drawing attached. Scope of erection includes the mounting of transmitter as per hook-up drawing on a stanchion, cabling, glanding, termination, tubing with necessary fittings to orifice taping as per hook-up drawing, canopy, calibration, loop checking assistance to client etc.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Supply of control valve PCV-6765A as per data sheet. Scope of supply includes supply of valve in completely pre-tubed and tested condition with all accessories. (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Erection of control valve PCV-6765A as per data sheet. The mechanical erection shall be under contractors piping scope. Erection scope considered here includes the pneumatic tubing, cabling, glanding, termination, stroke checking/ calibration, assistance in loop checking to client etc. and adjustment of orientation of accessories and re-tubing if required at site. (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Supply of control valve PCV-6765B with silencer as per data sheet in completely pre-tubed and tested condition with all accessories. (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Erection of control valve PCV-6765B with silencer as per data sheet in completely pre-tubed and tested condition with all accessories. The mechanical erection shall be under contractors piping scope. Erection scope considered here includes the pneumatic tubing, cabling, glanding, termination, stroke checking/ calibration, assistance in loop checking to client etc. and adjustment of orientation of accessories and retubing if required at site (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Supply of control valve HCV-0804 as per data sheet in completely pre-tubed and tested condition with all accessories. (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Erection of control valve HCV-0804 as per data sheet in completely pre-tubed and tested condition with all accessories. The mechanical erection shall be under contractors piping scope. Erection scope considered here includes the pneumatic tubing, cabling, glanding, termination, stroke checking/ calibration, assistance in loop checking to client etc. and adjustment of orientation of accessories and re-tubing if required at site. (Including additional material/ fittings if required).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Assistance in checking of MOV control & feedback signals - Erection
2
-
-
... More
Supply of cable- One pair twisted 1.0 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet attached in the tender document (Type A).
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1000
-
-
... More
Erection of cable- One pair twisted 1.0 mm2 copper stranded PVC Insulated Cable FRLS, Armoured and screened as per data sheet attached in the tender document (Type A). Scope of erection includes transportation of cable drum to site, Unwinding using cable puller, laying without twists, laying through tray/ conduit etc. as per instruction of SIC.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1000
-
-
... More
Supply of Thermocouple extension cables- as per data sheet attached in the tender document (Type TT). Scope of erection includes transportation of cable drum to site, unwinding using cable puller, laying without twists, laying through tray etc. as per instruction of SIC. (Erection of this item is included with associated temperature transmitter (Separate charges not applicable) and balance quantity shall be handed over to SIC/ client)
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
100
-
-
... More
Supply of 100mm wide perforated Aluminum cable tray as per data sheet attached.
Note: - 1) The cabling envisaged is above ground only. However, where above ground cabling is not practical due to lack of structural support, underground cabling shall be done with conduit buried in 1" GI. Requirements to be assessed at site. No separate charges are applicable for such work (Excavation and refilling) other than cable laying charges.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
300
-
-
... More
Erection of 100mm wide perforated Aluminum cable tray as per data sheet attached. Scope of erection includes necessary fabrication works with tray, laying of tray etc. as per instruction of SIC.
Note: - 1) The cabling envisaged is above ground only. However, where above ground cabling is not practical due to lack of structural support, underground cabling shall be done with conduit buried in 1" GI. Requirements to be assessed at site. No separate charges are applicable for such work (Excavation and refilling) other than cable laying charges.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
300
-
-
... More
Supply of 50mm wide perforated Aluminum cable tray as per data sheet 32654-14-DA-00013.
Note: - 1) The cabling envisaged is above ground only. However, where above ground cabling is not practical due to lack of structural support, underground cabling shall be done with conduit buried in 1" GI. Requirements to be assessed at site. No separate charges are applicable for such work (Excavation and refilling) other than cable laying charges.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
110
-
-
... More
Erection of 50mm wide perforated Aluminum cable tray as per data sheet 32654-14-DA-00013. Scope of erection includes necessary fabrication works with tray, laying of tray etc. as per instruction of SIC.
Note: - 1) The cabling envisaged is above ground only. However, where above ground cabling is not practical due to lack of structural support, underground cabling shall be done with conduit buried in 1" GI. Requirements to be assessed at site. No separate charges are applicable for such work (Excavation and refilling) other than cable laying charges.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
110
-
-
... More
Supply of 1/2" NPT type cable glands suitable for armoured cables as per data sheet attached. (these cable glands are intended for glanding at customer end junction boxes by removing the existing plugged entries in JB) No separate charges are applicable for these and shall be included in erection of respective instrument. Balance quantity shall be handed over to client/ SIC.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
15
-
-
... More
Supply & erection of FRP Canopy for transmitting instruments. The canopy shall be of existing models used at site.
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
7
-
-
... More
Supply of SWAGE NIPPLE 100 mm long IBR, 3/4" Plain X 1/2" Plain, SA105, SCH80 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
8
-
-
... More
Supply of COUPLING SW, IBR, 1/2" SW, SA105, 3000# Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
15
-
-
... More
Supply of MALE CONNECTOR, 1/4" NPTM X 6 mm OD double compression, SS316 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
5
-
-
... More
Supply of TUBE 6 mm OD x 1mm thickness Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
42
-
-
... More
Supply of FEMALE CONNECTOR, 1/2" NPTF X 6 mm OD double compression, SS316 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
5
-
-
... More
Supply of TUBE UNION 6 mm OD Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
4
-
-
... More
Supply of PIPE IBR, 1/2", A106-Gr. B, SCH 80 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
72
-
-
... More
Supply of TUBE 12 mm OD x 1.5 mm thickness Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
18
-
-
... More
Supply of FEMALE CONNECTOR, 1/2" NPTF X 12 mm OD double compression, SS316 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
8
-
-
... More
Supply of NIPPLE OET 100 mm long IBR, 1/2" NPTM x 1/2" PLAIN, SA 53-Gr. B, SCH 80 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
12
-
-
... More
Supply of MALE CONNECTOR ,1/2" NPTM X 12 mm OD double compression, SS316 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
10
-
-
... More
Supply of EQUAL TEE, IBR, 1/2 " SW, SA 105, 3000# Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
6
-
-
... More
Supply of TUBE UNION, 12 MM OD, SS316 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
6
-
-
... More
Supply of CAP IBR, 1/2 " NPTF, SA105, 3000# Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
7
-
-
... More
Supply of HEX HEAD PLUG, IBR, 1/2 "NPTM, A106- Gr. B, 3000# Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
12
-
-
... More
Supply of GATE VALVE IBR 1/2" SW, A105, 800 #, 13 CR-TR, Stellited Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
11
-
-
... More
Supply of CONDENSATE POT IBR, 1/2 " SW - 2 No x 1/2" NPTF-2 No plugged, A106 Gr. B, SCH 80 Note: - 1) Erection rates for the pipe/ pipe fittings, tubes & fittings are included along with the rate quoted for associated main instrument erection and no separate charges are applicable for each item.
2) Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
5
-
-
... More
OTHER ERECTION MATERIALS - Supply
STRUCTURAL STEEL including ISMC 75, ISA 50 X6X 6, 1"
GI pipe for conduit application underground, 2" MS pipe (For stanchion fabrication), 10mm thick base plate, 1" conduit GI pipe at a depth of 400 mm for a length of 12 m, including excavation & back filling for routing cables
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1.6
-
-
... More
OTHER ERECTION MATERIALS - Erection
STRUCTURAL STEEL including ISMC 75, ISA 50 X6X 6, 1"
GI pipe for conduit application underground, 2" MS pipe (For stanchion fabrication), 10mm thick base plate, 1" conduit GI pipe at a depth of 400 mm for a length of 12 m, including excavation & back filling for routing cables
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1.6
-
-
... More
SUPPLY OF SPARES
Supply of spares for control valve PCV 6765 A as per Spares philosophy 32756-14-PS-0001 SPR INST
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
SUPPLY OF SPARES
Supply of spares for control valve PCV 6765 B as per Spares list 32756-14-PS-0001 SPR INST
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
SUPPLY OF SPARES
Supply of spares for control valve HCV 0804 as per Spares list 32756-14-PS-0001 SPR INST
Note: - Scope mentioned here is only informative and for payment purpose and quick reference, but not exclusive. For detailed scope, refer to tender document.
1
-
-
... More
Erection, testing and commissioning of Local Control Stations (Type-P1) for ON/OFF control of MOV actuators with, IP 65, weather proof, cast Aluminum enclosure as per specifications attached. Cable entry shall be suitable for 1 No.7C x 2.5 sq.mm XLPE insulated armoured copper cable. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.
2
-
-
... More
Testing, Commissioning and Handing over 415 V motors up to and including 18.5kW nonhazardous Motors, as per enclosed specifications/ data sheets/ drawings. The scope shall include mounting of field instruments like speed switches, temperature probes, temperature gauges, etc. if any supplied by the motor manufacturer, megger testing, setting direction of rotation, no load run test, load run test, submission of test reports, etc. The charges indicated below shall include Testing, Commissioning and Handing over of the motors along with associated, ammeter, ON/OFF controls and annunciations if any applicable on control panels/stations. The scope shall also include submission of site test certificates. However, transportation & mechanical erection of motors and cable terminations are excluded from the scope of this item. This item is not applicable for single phase motors in ceiling fans; exhaust fans provided by the bidder. For other requirements refer Annexure.
2
-
-
... More
Supply of 650/1100V, Copper conductor XLPE insulated, PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 4 sq.mm. Refer (2.0) of annexure.
325
-
-
... More
Erection, Testing, Commissioning and Handing over of 650/1100V, Copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3Cx4sq.mm. Refer (2.0) of annexure.
325
-
-
... More
Supply of 650/1100V, copper conductor XLPE insulated, PVC sheathed, armoured, PVC outer sheathed cable of size 7C x 2.5 sq.mm. Refer (2.0) of annexure.
100
-
-
... More
Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, PVC sheathed, armoured, PVC outer sheathed cable of size 7C x 2.5 sq.mm. Refer (2.0) of annexure.
100
-
-
... More
Supply of 650/1100V, copper conductor XLPE insulated, PVC Sheathed, armoured, PVC outer sheathed cable of 10C x 1.5 sq.mm. Refer (2.0) of annexure.
550
-
-
... More
Erection of 650/1100V, copper conductor XLPE insulated, PVC Sheathed, armoured, PVC outer sheathed cable of 10C x 1.5 sq.mm. Refer (2.0) of annexure.
550
-
-
... More
Supply of 600V copper stranded PVC Insulated, extruded PVC sheathed FRLS, Armoured and screened cable of One pair twisted 1.0 sq.mm.
550
-
-
... More
Erection of 600V copper stranded PVC Insulated, extruded PVC sheathed FRLS, Armoured and screened cable of One pair twisted 1.0 sq.mm. Scope of erection includes transportation of cable drum to site, Unwinding using cable puller, laying without twists, laying through tray/ conduit etc. as per instruction of SIC.
550
-
-
... More
Supply of 300mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, SS tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below;
The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc. as required.
However, for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement.
60
-
-
... More
Erection of 300mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, SS tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below;
The erection scope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scope shall also include, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washers shall be of SS.
60
-
-
... More
Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 600V copper stranded PVC Insulated, extruded PVC sheathed FRLS, Armoured and screened cable of One pair twisted 1.0 sq.mm, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.
4
-
-
... More
Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminum conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 4sq.mm. cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.
4
-
-
... More
Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminum conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 7C x 2.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.
4
-
-
... More
Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 1.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.
4
-
-
... More
Supply of 1/2" NPT type cable gland suitable for 600V, copper stranded, PVC Insulated, PVC sheathed FRLS, Armoured and screened cable of One pair twisted 1.0 sq.mm. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.
4
-
-
... More
Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x4 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.
4
-
-
... More
Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 7C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.
4
-
-
... More
Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 1.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.
4
-
-
... More
Supply and fabrication of structural steel items as per drawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The scope of work shall be as noted below.
The supply scope shall include supply of MS steel sections of various sizes as required.
Chipping, cement grouting, re-plastering of walls, floors, ceilings, columns etc. of concrete or brick work for supporting the structural items, supply of structural items, bolts, nuts, washers, cement, sand, etc. are also included in the scope of the work. The bolts, nut, washers shall be of hot dipped GI. The rate indicated below shall be applicable also for structural if any issued by PURCHASER.
The concrete footing for supports shall be extra under separate item as indicated elsewhere.
Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly.
0.3
-
-
... More
Erection, fixing, epoxy painting and handing over of structural steel items as per drawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The painting shall be with two coats of epoxy paint over 2 coats of suitable epoxy primer.
The scope of work shall be as noted below.
The erection scope shall include transportation, handling at site, storage, inspection, safe custody, welding, cutting, making bolt holes, and painting with two coats of epoxy paint over 2 coats of suitable epoxy primer after cleaning with wire brush including supply of paint, etc. Chipping, cement grouting, re-plastering of walls, floors, ceilings, columns etc. of concrete or brick work for supporting the structural items, supply of structural items, bolts, nuts, washers, cement, sand, etc. are also included in the scope of the work. The bolts, nut, washers shall be of hot dipped GI. The rate indicated below shall be applicable also for structural if any issued by PURCHASER.
The concrete footing for supports shall be extra under separate item as indicated elsewhere.
Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly.
0.3
-
-
... More
Supply of PVC covered Aluminum conductors of size 70 sq.mm, (Main earth connection)
200
-
-
... More
Erection of PVC covered Aluminum conductors of size 70 sq.mm, (Main earth connection)
200
-
-
... More
Supply of PVC covered Aluminum conductors of size 16 sq.mm (For motors LCS, LDB etc.)
300
-
-
... More
Erection of PVC covered Aluminum conductors of size 16 sq.mm (For motors LCS, LDB etc.)
300
-
-
... More
Supply of 100 mm wide, 6mm thick Aluminum junction plate of various lengths suitable for connecting required number of earth conductors. For general requirements refer Annexure. Also refer Drg. No. 32756-13-GE-00 254.
3
-
-
... More
Erection of 100 mm wide, 6mm thick Aluminum junction plate of various lengths suitable for connecting required number of earth conductors. The scope includes cutting to required sizes and fixing the junction plate on walls/racks/supports, etc. as well as punching of bolt holes. For general requirements refer Annexure. Also refer Drg. No. 32756-13-GE-00 254.
3
-
-
... More
Supply of GI pipe electrode earth pits. The supply scope shall include supply of electrodes, GI pipes, earth conductors and funnel and all other accessories required. The scope shall also include supply of all accessories such as sand, reinforcement steel, brick, rubble, PVC pipes, clamps, bolts, nuts, washers, bitumen compound, etc.
2
-
-
... More
Erection of GI pipe electrode earth pits. The scope shall include excavation with shuttering if required, dewatering the excavated pit if required, refilling with charcoal & sand, construction of inspection chamber with cover slab, etc.
2
-
-
... More
Supply and installation of 1:2:4 PCC for cable tray supports, PB Station pedestals, etc. The scope shall include supply of all materials like sand, stone, etc. The charges furnished shall cover supply of all materials required. For other requirements refer Annexure.
1
-
-
... More
Chipping of concreted area/ concrete slab, etc for laying cables or pipes and rebuilding the chipped area to original condition. The scope shall include supply of all materials necessary for rebuilding. The charges furnished here shall cover all items applicable including supply of materials.
1
-
-
... More
Labour rates for Helper with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.
3
-
-
... More
Labour rates for Electrician with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.
3
-
-
... More
Labour rates for Electrical supervisor with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.
3
-
-
... More
Labour rates for Electrical supervisor at site on over time basis (after normal shift time of 8 hour)
5
-
-
... More
Labour rates for Electrician at site on over time basis (after normal shift time of 8 hour)
5
-
-
... More
Labour rates for Helper at site on over time basis (after normal shift time of 8 hour)
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%