Steel Industrials Kerala Limited Tender

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

od118789/2022_2023 : OD Supplying and fixing 1500 mm x 1200 mm x 2300 mm modular toilet cabin 4 Numbers for water clossets main structure supporting column at corners is made out of GI 100x40 mm pipe 16 gage thick welded between the top and base frames fixed with foundation boult .The structural base frame work made out of 60x60 mm Pipe and GI 60 x 40, GI 60 x 40 as intermediate support both ways to support the Wall with 40mm thick PUF Wall STRUPAN panel made out of Inner and outer in TRYPIZOIDAL AND MICRORIBED PPGI sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. STRUPAN PUFF --PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior and Interior with micro ribs and 1000 mm cover width made out of 0.5 MM PPGI RMP 240MPA /0.5 mm PPGI RMP 240 MPA color coated galvanized steel, 120 GSM Zinc coating with 20 microns polyester paint. Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 Kg / m3 in 50 mm thick shall be supplied in 1 mtr roof Supply of 30mm thick PUF Roof STRUPAN panel made out of Inner and outer in TRYPIZOIDAL AND MICRORIBED PPGI sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. STRUPAN PUFF --PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior and Interior with micro ribs and 100 mm cover width made out of 0.5 MM PPGI RMP 240MPA /0.5 mm PPGI RMP 240 MPA color coated galvanized steel, 120 GSM Zinc coating with 20 microns polyester paint. Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 Kg / m3 in 30 mm thick shall be supplied in 1 mtr width The structural Top frame work made out of 2mm thick GI 60 x 40 pipe as peripheral frame work and GI 60 x 40 & GI 40 as intermediate support at an interval of 1200mm to support the toilet and verandha roof and 300 mm all side projections . Fixing inside W/c 300x300mm, 6 mm thick antyskid floor tile and 150 cm hight dadooing including verandha parapet wall 150 cm height also. 4 no EWC with seat cover, 4 no Soap dish,4 no coat hook with necessary plumbing in each area using with ISI mark PVC Pipe and necessary electrical wiring with ISI mark cable and fittings including supplying and fitting 6 nos 600 mm tube light ISI Mark.. Standard Size puff Panel door 4 Numbers (80x210 cm )..8 handles, 8 tower bolt, 8L galvonasied GI vendilators 4 nos long body S S Tap in each compartment,800X600X6 MM MIRROR 2 NOS including all cost of materials conveyance laying labour charge etc complete As per the direction of departmental officers

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od118710/2022_2023 : OD Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work including)

od118713/2022_2023 : Supplying and fixing P V C Septic tank 1000 ltr capacity ISI Model ,including all cost of materials conveyance laying labour charge etc complete as per the direction of Engineer in Charge

od118714/2022_2023 : Supplying and fixing P V C Water tank 1000 ltr capacity ISI Model ,including all cost of materials conveyance laying labour charge etc complete as per the direction of Engineer in Charge

od119124/2022_2023 : Supplying and fixing white prociline wash basin ISI Model 35mm x 50mm with 1 S S piller Basin tap 1 angle walve 40 mm nylone connection, wast cuppling plumping work ,including all cost of materials conveyance laying labour charge etc complete as per the direction of Engineer in Charge

od119161/2022_2023 : Supplying and fixing readymade ferocement leach pit 1 m dia 1000 ltr capacity