Steel Industrials Kerala Limited Tender

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

13.6.1 : 20 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od148991/2024_2025 : Providing and laying Vitrified parking tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 400 x 400 mm.

od165778/2024_2025 : Providing and fixing WPC (Wood Polymer Composite) Door 90cm x 205cm , made from wood fiber and plastic, highly durable , high water resistance and 100 percent termite-proof of 30 mm thickness with Frame of size round corner 75 x 50 mm square die made out of single piece extruded WPC profile, with mitered cut joints and with 2 nos of WPC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, including all accessories, all as per manufacturer's specification and direction of Engineer-in--charge.

od165966/2024_2025 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:<br>6 mm thick cement board

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

od175363/2024_2025 : Supply and apply of High grade thinner based PU clear _ A _ Grade UV Stable and water resistant wood coat of approoved brand and manufacture of required color to give an even shade as per the direction of site engineer . one or more coats on old work. Brand: MRF or Equivalent.)

11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

od166360/2024_2025 : Cleaning floor using acid including material and labor charge as approved by the site<br>engineer in charge

Electrical Work

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

od149751/2024_2025 : Supply and installation of 200x200 mm, 45W, 1900 RPM Exhaust fan fitted on ceiling rose as per the direction of site engineer.

od149800/2024_2025 : Supply and fixing 15 W Round/ Square LED ceiling light with all accessories including cutting false ceiling for, as required and approved by the site engineer.

od149797/2024_2025 : Supply and fixing 18 W LED mirror light with all accessories , as required approved by the site engineer.

Plumbing work

od149815/2024_2025 : :Providing and fixing Wall hanging Half Pedestal Wash Basin of high quality of make Johnson/ Cera with C.I. brackets, including CP waste coupling ,PVC waste pipe flexi pipe 40 mm, painting of fittings and brackets, cutting and making good the walls wherever require: Wall hung Wash basin size 350X455X130 mm (excluding the half pedestal)

17.8 : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

od149855/2024_2025 : Providing and fixing C.P. brass Pillar tap of superior quality conforming to IS standards of make Cera / Johnson . 15 mm nominal bore.

od149861/2024_2025 : Providing and fixing white vitreous China pedestal type rim free one-piece water closet (European type) having the toilet bowl and cistern tank unified to make a single unit. with soft close seat and lid, 6 litre & 3 litre Dual flushing low level white vitreous China flush tank including painting of fittings and brackets, cutting and making good the floors wherever required : one-piece water closet with white solid plastic seat and lid

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

od149868/2024_2025 : Providing and fixing PVC molded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - Connection tube<br>15 mm nominal bore with 60 cm length.

od149869/2024_2025 : Providing and fixing PVC molded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - Connection tube<br>15 mm nominal bore with 45 cm length.

od149874/2024_2025 : Providing and fixing C.P. brass long body bib cock of superior quality conforming to IS standards of make Johnson/ Cera .15 mm nominal bore

od149878/2024_2025 : Providing and fixing 4"X2" PVC floor trap with Stainless steel Floor Drain 150X150 mm square of make Cera / Johnson on the existing bathroom floor as per directions of the engineer in<br>charge.

od149883/2024_2025 : Supplying and fixing CP Towel rod 60cm or nearest available length of make cera/ Johnson including cost of materials and labor charges etc complete as per the direction of site Engineer-in-charge.

od164730/2024_2025 : Supplying and fixing CP paper holder of make cera / Johnson including cost of materials and labor charges etc complete as per the direction of site Engineer-in-charge

od150551/2024_2025 : Supplying and fixing Stainless steel soap dish of superior quality of make Johnson or Cera including cost of materials and labor charges etc complete as per the direction of site Engineer-in-charge.

od150552/2024_2025 : Supplying and fixing CP Robe Hook make Johnson or Cera including cost of materials and labor charges etc complete as per the direction of site Engineer-in-charge

od150553/2024_2025 : Providing and fixing beveled edge mirror of superior glass ( of approved quality) <br>Rectangular shape 453x357 mm

15.52 : Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

od150852/2024_2025 : Dismantling of wash basin of all types ( including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

14.82 : Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

50.18.8.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2

50.18.8.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2

50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2

od150291/2024_2025 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 150 mm pipe 6 kgf/cm2

od150321/2024_2025 : Providing and fixing CPVC molded fittings/ accessories for Rigid CPVC pipes, including jointing with PVC solvent cement -25 -20 mm Brass threaded Elbow

od150322/2024_2025 : Providing and fixing PVC molded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 25- 20 mm Brass thread Tee

od164650/2024_2025 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 50 mm dia Elbow

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

od165733/2024_2025 : Providing and fixing SS grab rail of standard design and of approved make conforming to IS: 8931 . 45 mm length

od165934/2024_2025 : Supply of 5 Litre good quality SS Waste bin, as required and approved by the site engineer