Steel Industrials Kerala Limited Tender

od97380/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mm D x 2700mm L x 2590mm Ht, 1 DFSU + 7 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type 9 nos and 7 Panels with 6 Loading Level for A4 type of 9 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Malayinkeezhu

od97371/2024_2025 : Supply of Mobile File Storage System in The Size of 10500mm D x 2700mm L x 2510mm Ht, 1 DFSU + 10 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 17 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Pulinkunnu

od98071/2024_2025 : Supply of Mobile File Storage System in The Size of 9100mmL X 1800mmD X 2470mmHt, 1 DFSU + 8 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type 2 nos and 7 Panels with 6 Loading Level for A4 type 18 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Chirayinkeezhu

od97483/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mmL X 3600mmD X 2203mmHt, 1 DFSU + 7 DFMU + 2 SFMU, 4 Panels with 3 Loading Level for A3 type of 11 nos and 6 Panels with 5 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Kuzhipilly

od98229/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mmL X 2700mmD X 2590mmHt, 1 DFSU + 7 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 9 nos and 7 Panels with 6 Loading Level for A4 type of 9 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Vazhur

od97643/2024_2025 : Supply of Mobile File Storage System in The Size of 4600mmL X 3600mmD X 2590mmHt, 1 SFSU + 4 DFMU + 1 SFMU, 5 Panels with 4 Loading Level for A3 type of 3 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Mala

od97688/2024_2025 : Supply of Mobile File Storage System in The Size of 5300mmL X 3600mmD X 2590mmHt, 1 SFSU + 5 DFMU + 1 SFMU, 5 Panels with 4 Loading Level for A3 type of 5 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Annamanada

od97692/2024_2025 : Supply of Mobile File Storage System in The Size of 5300mmL X 3600mmD X 2590mmHt, 1 SFSU + 5 DFMU + 1 SFMU, 5 Panels with 4 Loading Level for A3 type of 5 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Uduma

od97616/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mmL X 2700mmD X 2590mmHt, 1 DFSU + 7 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 11 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

SRO Paravur

od97416/2024_2025 : Supply of Mobile File Storage System in The Size of 9100mmL X 2700mmD X 2590mmHt, 1 DFSU + 8 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 14 nos and 7 Panels with 6 Loading Level for A4 type of 6 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.