Steel Industrials Kerala Limited Tender

1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

5.3 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.s

90.16.2.3 Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

90.16.4.3 Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 6 mm GI strip

90.12.1.41 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

9.1.33 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

od268648/2023_2024 Supply of Box for Panel Board made out of Sheet Moulding Compound (560 x 280x 150 mm size) Surface mounted or recess-in wall (Indoor/Outdoor Use) One-piece moulded SMC base and SMC door with internal hinges. Knockout for wire entry, earthing bolt.br A.SMC Box 560 x 280 x 150 mm size - 1 Each B.25A Contactor, Coil 240V 50/60Hz up to 500v - 1 Each C.MCB 2Pole - 1 Each D.63A Connector- 1 Each E.Digital timer- 1 Each F.Banana Al. socket- 1 Each G.2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable- 30 meter H.Labour charges

od268650/2023_2024 Supply and fixing of 2 nos.of 25A 3 Pole AC 1 rated power contactor, Selector switch for motor control, supply and fixing flush head push button NO-NC, 1.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable and 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable.s A.25A 3 Pole AC 1 rated power contactor - 1 Each B.2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable -5 Meter C.Selector switch for motor control - 1 Each D.supply and fixing flush head push button NO-NC - 2 Each E.1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable- 6 Meter F.Labour charges

od268651/2023_2024 Fabrication and fixing of the Panel Board Stand with 2 legs made up of B class GIbrpipe 32mm dia 1.8mtr. length. 32 mm dia G.I pipe ( medium class)br A.32 mm dia. G.I. pipe (medium class) - 3.6 Meter B.MS Flat (Ref. MR6004) - 2 Kg C.Welding Electrode 10 Guage - 6 Each D.MS Bolts and Nuts (Ref. MR6007) -0.25 Kg E.Stone aggregate (single size) 20mm nominal size - 0.26800 cum F.Stone aggregate (single size) 10 mm nominal size- 0.08800 cum G.Coarse sand (Zone III) - 0.18000 cum H.Cement - 0.12800 tonne I.Grey Paint(Ref MR7137) - 0.1per litre J.Labour charges

od268652/2023_2024 Supply of Meter Box made out of Sheet Moulding Compound (430 x 265 x 170 mm size) Surface mounted or recess-in wall (Indoor/Outdoor Use) One piecebrmoulded SMC base and SMC door with internal hinges. Knockout for wire entry, earthing bolt and earthing of the meter box.br A.2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable-5 Meter B.SMC Meter Box 430 x 265 x 170 mm size - 1 Each C.63 A rating, 2 pole, 100 mA RCCB - 1 Each D.63A, HRC Fuse Base with HRC Fuse link - 1 Each E.63A, 2 Way neutral links mounted on DMC/SMC base- 1 Each F.Supply and Providing OBOR(SwitchinIgbrSurge/Lighting protection) for singlebrphase protectionbr - 1 Each G.G.I Pipes 25mm dia (Ref. LMR 1547) - 1 Meter H.Earth Wire (Ref. MR6044) -0.15 Kg I.Iron bolts and nuts of various sizes - 0.05 Kg J.PVC pipe 32 mm outer dia 6Kgf/cm2 - 4 Meter K.Earthing Compound - 4 Kg L.Labour charges

od268653/2023_2024 Fabrication and fixing of the Meter Box. Stand with 1 leg made up of GI pipebr40mm dia 2.5mtr. length.brbr A.MS Flat (Ref. MR6004) - 2 Kg B.MS Bolts and Nuts (Ref. MR6007) - 0.25 Kg C.Stone aggregate (single size) 20mm nominal size - 0.268 cum D.Stone aggregate (single size) 10 mm nominal size - 0.088 cum E.Coarse sand (Zone III) - 0.18 cum F.Cement - 0.128onne G.Grey Paint ( Ref. MR7137 )- per litre H.G.I. pipes 40 mm dia (Ref. LMR 1549) - 2.5 meter I.Welding Electrode 10 Guage (Ref. MR7113) - 2 each J.Labour charges

od268654/2023_2024 charges for KSEB connection including all laison works (Actual amount paid on production of receipt

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more.

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

od268655/2023_2024 Supply and fixing of name board with angles , flats,square pipe, ACP sheet including nut and bolts, 4 no.s per mast ,2sqmm in area