Steel Industrials Kerala Limited Tender

14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

14.5.1 : Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm

od98682/2024_2025 : Dismantling wood work in tables and shelves including stacking the material within 50 metres lead:<br>

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

13.67.2 : Varnishing with varnish of approved brand and manufacture :Two or more coats glue sizing with spar varnish or an under coat of flatting varnish

od109360/2024_2025 : Providing Laminated HDF wooden flooring of AC3 grade and 8mm thickness with edge beading and other required materials including installation as per the direction of site engineer in charge.

od109615/2024_2025 : Providing WPC fluted wall panel of 14 mm thickness of wooden texture with required materials including installation as per the direction of site engineer in charge.

od109643/2024_2025 : Providing and fixing of Roman Blinds to cover windows with fabric which can block light and glare. Fabric: Max width 2.5 mtr, Composition:100% polyester, Weight 360 gsm, Openness factor 0%, light fastness 6-7 grade Roller Upper Tube: Made of high strength extruded aluminium alloy, finish powder coated with min 60 micron coating, Size of 40 mm outer dia and wall thickness of min.1.2mm, Special feature, it has end to end groove to hold fabric inside for better strength. Bottom Tube: Made of high strength extruded aluminium alloy, finish powder coated with min 60 micron coating,Size of 20 mm height and wall thickness of min. 1.2mm, Special feature, it has end to end groove to hold fabric inside for better strength. Control Unit: Made of high strength reinforced Nylon grade 6, consisting of outside sleeve and centre shaft, sleeve shall provide bearing surface of roller tube and rotate freely on centre shaft, providing smooth quiet and long wearing operations. Brackets: Fixing brackets is made of mild steel with zinc coating, made of thickness of min. 0.7mm. Ball Chain: Made of 2mm thickness polyester cord with moulded 4.5mm round plastic balls.complete as per the direction of enginner in charge .

od109680/2024_2025 : Providing and fixing Venetian blinds with 35mm slat width, quality of approved make, slats made of high-quality aluminum alloy with a thickness of 0.15mm, and a durable polyester powder coating (min 60 micron) in approved colors. The blinds shall have a sturdy headrail made of extruded aluminum alloy with a thickness of 1.2mm, and a width of 40mm. The headrail shall have a built-in cord tensioner and a secure chain lock. The blinds shall be equipped with a high-quality cord made of durable nylon material with a thickness of 2mm, and a plastic cord tensioner. The blinds shall be installed as per the design approved by the site engineer in charge , and shall be complete in all respects, including requisite installation brackets and anchoring arrangements.

od110219/2024_2025 : Providing Curtains using Floral pattern polyester cloth for Doors with required materials including installation as per the direction of site engineer in charge.

od110261/2024_2025 : Providing and fixing Letters of Main Matter Letters with Titanium Gold 1inch Projection Secondary Matter Letters with 4mm Acrylic and Titanium Gold .Main Matter Letters have 6 inch Height and Proportional Width .Secondary Matter Letters having 3inch Height and Proportional Width on WPC panel surface as per the instruction of the site engineer in charge.

od110256/2024_2025 : Providing and fixing PVC laminated Photo frame of size 60 cm x 40 cm with Photo as per the instruction of the site engineer in charge

Furnitures

od98778/2024_2025 : Supply of Table of size : 2400mm Length x 1000mm Depth x750mm Height. with 2 nos Side storage : 1600mm Length x 550mm Depth x 620mm Height. Table top made of 40mm thick MFC with 2mm edge lipping finish, under structure made of MFC. Openable shutters and drawers with Flip up box

od102502/2024_2025 : Supply of Executive Chair Armrests fixed Aluminum, upholstered With cushioned leatherette. Seat & backrest upholstered with leatherette. Knee-tilt mechanism with 4 position lock. Electro plated TUV-CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best in class quality. Chrome coated Base with PU castors :340mm.

od102503/2024_2025 : Supply of Guest Chair with Armrests fixed PP with fiber upholstered with cushioned leatherette. Seat & backrest upholstered with leatherette. 2.1mm thick, fixed round tube Powder coated/ electro plated chrome mild steel cantilever base.

od102504/2024_2025 : Supply of SOFA 2 SEATER (Seat – 32 density foam with Pocketed Spring & Backrest Removable Recron Cusions) Leg: Wooden as per the design approved by engineer in charge .

od102479/2024_2025 : Supply of Coffee table of size : 900mm x 600mm x 420mm Height. Table made of 18mm thick MFC with 2mm edge lipping finish, under structure made of MFC . Complete with approved laminate shades as per Site engineer in charge.

od102288/2024_2025 : Supply of TV UNIT of size 1000 mm Length X250 mm Depth x160 mm Height .Made of 18mm thick MFC with 2mm edge lipping finish. * Openable 6mm thick transparent glass shutter .complete as per the design approved by site engineer in charge.

od102264/2024_2025 : Supply of Corner Shelf of size : 900mm Length with two sides of 600mm each with 180mm Height. Made of 18mm thick MFC with 2mm edge lipping finish, under structure made of MFC . 6mm Thick toughened glass shutters with 3 hinges on each shutters .Complete with approved laminate shades as per Site engineer in charge.

od102505/2024_2025 : Providing Indoor plant set of 4 of Aglaonema plant , snake plant , dracaena plant and succulent plant along with FRP pot of 30 cm height and 1 table top frp pot of 10 cm height with required earth filling as per the instruction of the site engineer in charge.

Air-conditioning

od103936/2024_2025 : Supply , conveyance , installation , testing and commissioning of inverter type split air conditioner 1.5 TR 3 Star approved by the site engineer in charge . Make : (Panasonic / Bluestar / Voltas )

od103937/2024_2025 : Supply and fixing of 1.5Tr A/C Outdoor Stand and its accessories required.

od142933/2024_2025 : Supply and fixing of insulated drain piping out of PVC pipes duly insulated with 9mm nitrile rubber pipe sleeves

od142934/2024_2025 : Supplying, fixing, testing and commissioning of Copper refrigerant piping interconnecting evaporator and condensing units with 12mm thick nitrile rubber tubes for suction line as per the instruction of site engineer in charge .

od103953/2024_2025 : supply and installation of 4 kva stabilizer of standard make as approved by the site engineer in charge. Make : (V Guard )

od107904/2024_2025 : Disconnecting and dismantling existing AC indoor and outdoor units, stabilizer etc. complete and stacking within 50 metres lead as per direction of<br>Engineer-in-charge.

Electrical

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

od117432/2024_2025 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

od117464/2024_2025 : Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x4 sq.mm + 1x 2.5 sq.mm earth wire

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.6 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

od125661/2024_2025 : Supplying and fixing following faceplate plate on existing modular PVC boxes etc. as required. Dual module

od127757/2024_2025 : Supplying and fixing following faceplate plate on existing modular PVC boxes etc. as required. 8 module

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

90.10.3.17 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

od117457/2024_2025 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )<br>- USB A type Socket

od117458/2024_2025 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )<br>- RJ45 Cat6 data Socket

od117459/2024_2025 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )<br>- RJ11 Telephone socket

od117433/2024_2025 : Providing and fixing LED strip light and required accessories as approved by the site engineer in charge .Make : (Havells / Luker or equivalent )

od117434/2024_2025 : Supply and fixing 12 W Round/ Square LED ceiling light with all accessories including cutting false ceiling for, as required and approved by the site engineer. Make : (Havells / Luker or equivalent )

od117435/2024_2025 : Providing and fixing Pendant light as approved by the site engineer in charge .Make : (Havells / Luker or equivalent )

od117436/2024_2025 : Providing and fixing Picture light as per the direction of Site engineer in charge including drilling holes on wall , making connections, etc. as required. Make : (Havells / Luker or equivalent )

od125295/2024_2025 : Providing AV cable of length 3 meters of good quality as per the instruction of site engineer in charge.

od117437/2024_2025 : Dismantling of Electrical fittings (TubeLights, ceiling fans, Switch box, cover plate , PVC Conduits, Distribution boards, exhaust fan,switch, socket, dimeer etc) including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

miscellaneous work

od106699/2024_2025 : 2 mm thick Vinyl flooring with required adhesive including Installation .complete as per the instruction of site engineer in charge

od117467/2024_2025 : Providing Coir Welcome Door Mat of 25 mm thickness and length 60 cm x breadth 150 cm as per the direction of site engineer in charge.

od124451/2024_2025 : Providing and Fixing Automatic Heavy Duty Aluminum Hydraulic Double Speed Alloy Door Closer (Silver), (Suitable for: right hand and left Hand Opening Doors, Mounting on Door Panel or Door Frame, Door Panel up to 900mm Width, Door Opening up to 180 Degree).

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved