Steel Industrials Kerala Limited Tender

od193454/2024_2025 : Supply and installation of additional copper pipping for air conditioner using 1/2" copper pipe, 1/4" copper pipe, 1/2" nitrile insulation tube, 3/8" insulation tube and 4run 2.5 sqmm copper wire all complete as per the direction of the engineer in charge.

Civil works

od141523/2024_2025 : Applying Terminator Treatment for Wooden Materials all complete as per direction of Engineer - In-Charge (The rate is inclusive of all materials & labours involved except scaffolding ).

od178547/2024_2025 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter and stacking within 50 metres lead: Of area 3 sq. metres and below as per the Engineer in charge

od171773/2024_2025 : Applying of High grade thinner based PU clear _ A _ Grade UV Stable and water resistant wood coat of approoved brand and manufacture of required color to give an even shade as per the direction of site engineer . one or more coats on old work

od141534/2024_2025 : Applying of High grade Solids Sealer thinner based PU clear - A- Grade UV Stable and Water Resistant Wood Coat of approved brand and manufacture of required color to give an even shade as per the direction of site engineer.<br>One or more coats on old work.

od143357/2024_2025 : Applying of high grade thinner based Tile grade clear - A - Grade Premium quality natural stone protection sealant of approved brand and manufacture of required color to give an even shade as per the direction of site engineer.<br>One ore more coats on old work

od178570/2024_2025 : Re-installing dismantled doors, windows and clerestory windows (steel or wood ) shutter Of area 3 sq. metres and below as per the Engineer in charge

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

od141584/2024_2025 : Providing and fixing Black tinted sunscreen film on window glass panels, allow 30% to 40% of the natural light into the space, blocks up to 90% of damaging UV rays and Rejects up to 90% of heat all complete as per direction of Engineer-in-charge.<br>Colour: Dark blue.

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od163238/2024_2025 : Providing and fixing glass Door Lock With Claw Type Dead Bolt & Strike Plate, claw type dead bolt only, key to key cylinder-Computerised, EP Cylinder can be change with other option, Stainless Steel Grade 304 and Finish: SSS.

od163242/2024_2025 : Providing and fixing Cam Action Floor Spring with Closing Force, EN4 Double Cylinder (Heavy Duty), Maximum door weight: 120Kgs, Maximum door width: 1100mm, Closing speed: 130-10°, Final Closing speed: 10-0°, Hold Open (standard): 90°.

od163243/2024_2025 : Providing and fixing Pull Handle With Back to Back installation on Glass/Wooden/Metals Doors. In case of Wooden Exteneded Spindle would be provided on request. Gaskets to prevent the contact between glass and metal. Supporting washer with raised bevelling on the outer surface. Grub screws kept out of sight. Material:-Stainless Steel Grade 304. Finish: SSS.

14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

Electrical

1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.5 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

od163857/2024_2025 : Supply, installation, testing & commissioning of the Profile with 20W LED strip switching power supply driver as required of standard make as approved by the site engineer in charge(LMR)

od163858/2024_2025 : Supply , installation, testing & commissioning of the12 V DC switching power<br>supply driver as required of standard make as approved by the site engineer in<br>charge(LMR)