State Warehousing Corporation Tender

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work, painting over the existing structure after preparing the surface by using wirebrush or emery paper,all works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required.

Providing and fixing Polycarbonate sheet (2 mm thick). Sheet should have protective guard film of 25 micrones minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling/self tapping screws with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc complete.All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required.

Providing silicon compound covering to G.I. bolts over roof including cost and conveyance of all material required etc. complete. The rate also including providing scaffolding

Engaging Helpers for masonary work for patch work of godown. The payment may be released only against the actual labours engaged.

Engaging masons for patch work. The payment may be released only against the actual labours engaged.

Providing and fixing 200mm (or nearest greater available size) UPVC half split square type eave gutter including cost of all necessary fittings (PVC down pipe to be paid separately) and conveyance of all materials and labour charges, scaffolding etc complete. The rate also includes providing necessary support to the gutter by using MS Angles or straights.

Fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

Fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand) including cost of all materials, conveyance, labour charge, scaffolding etc complete as required.

Providing and fixing Galvalume sheets ( Supply of Pre painted Alu- Zinc alloy coated steel sheets -55% Aluminium, 43% Zinc, 1.6% Silicons,0.5mm thick-PPGL). Sheet should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling screws with corrosion resistant (SDS of brand Patta) of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and providing plain Galvalume sheets ridges of width 1.20m and thickness 0.50mm. The ridge shall be measured seperately, including cost of cutting to size and shape wherever required as per direction of engineer in charge.The rate inclusive of covering of existing stocks inside godown from falling of dust and covering of roof from raining with tarpauline sheet during the execution of work also the cost and conveyance of material to site and necessary scaffoldings which required.The contractor shall submit the manufacturers test certificates of the roofing sheet before commencing the work and also required to conduct the test on the randomly selected sample from the site by the Engineer-in -Charge to ensure the minimum thickness.