Sree Sankaracharya University Of Sanskrit Tender

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

od110409/2018_2019 : Labour engaged for removing handrails as per direction of engineer in charge

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

od111807/2018_2019 : Providing and fixing aluminium tr afford profile sheet of alloy 31500/31000/4080 conforming to IS 1254,IS 737,IS 2676, 0.71 mm thick profile detail width 1044/9020 mm ,cover width 1000/878 mm, roofing up to any pitch and fixing with polymer coated J or L hooks ,bolt and nuts 8 mm dia GI plain and bitumen washers or with self drilling fastener and EPDM washers etc.complet (excluding the cost of purlins , rafters and trusses ),including cutting sheets to size and shape wherever required.

12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

od112208/2018_2019 : Providing and fixing 200 mm PVC gutter

od112219/2018_2019 : Providing and fixing tufflen glass of 8 mm thick (weight not less than 25.82 kg /M2) for sides of lift room as per the direction of the Engineer in charge .

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

App.B

od49697/2019_2020 : Supply, Installation, Testing and Commissioning of 3 side Toughened Glass Landing Doors Car Doors, 8 passenger( 544Kg) gearless and MRL type Lift at site conforming to the latest lift act and lift practice in the existing lift well as per specification including obtaining clearance from local inspectorate etc as required having a speed of 1 m/sec with total travel as given below. All Door Frames will be 1.2mm thick 304 Grade, SS Hailine Finish with Overload Protection Device and Automatic Rescue Device. The lift shall be operated on automatic push button control, selective collective system with and without attendants and suitable for 3 phase, 50Hz, 415V AC supply with energy efficient gearless motor and microprocessor VVVF controller. The work also includes 24 months free comprehensive maintenance of the lift including replacement of defective materials, periodical inspection and servicing including attending the breakdown calls etc as reqd. Miscellaneous items like supports for guide rails, overhead gears, scaffoldings, minor building works like making pockets, holes, painting etc. and making good the same is also included within the scope of work. No. of opening and stop- (G+2) Door Opening width- 900 mm Center Opening Position- Academic Block - I, Library, Language Block