Smart City Thiruvananthapuram Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Smart City Thiruvananthapuram Limited Tender
Civil And Construction
Eprocure
Opening Date3 Feb 2024
Closing DateCancelled
Tender Amount₹ 17,42,29,698
Costs
EMD
₹ 5,00,000Document Cost
₹ 19,514Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCTLT_654266_1Bid Award Id
ViewTender No
SCTL-PRJ/217/2023/PMM/MLCP/05Tender Authority
Smart City Thiruvananthapuram Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
523.29
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
49.65
-
-
Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1551.56
-
-
CONCRETE WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
188.36
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
59.6
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
232.73
-
-
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
180.79
-
-
REINFORCED CEMENT CONCRETE WORK
-
-
-
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
719.56
-
-
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
779.78
-
-
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
8800.93
-
-
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
6521.8
-
-
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
2424.22
-
-
Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
116.23
-
-
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
190751.38
-
-
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
328801.07
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. No payment shall be made for any excess cement used for the item.The quoted rate is deemed to be inclusive of all actual cement required.All works upto plinth level.
530.34
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:-Cement content considered in this item is @ 330 kg/ cum. No payment shall be made for any excess cement used for the item.The quoted rate is deemed to be inclusive of all actual cement required.All work above plinth level upto floor V level
2584.73
-
-
Extra for R.C.C. /B.M.C/R.M.C. work above floor V level for each four floors or part thereof.
409.27
-
-
Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is not payable.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
448.87
-
-
MASONRY WORKS
-
-
-
Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
208.48
-
-
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
335.66
-
-
FLOORING
-
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufactures specification. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
8017.94
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
1250.11
-
-
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
568.47
-
-
Providing and laying Vitrified anti-skid tiles
239.01
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete
485.96
-
-
STEEL WORK
-
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
778.19
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
4777.92
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
104.4
-
-
Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending
1345
-
-
FINISHING WORK
-
-
-
Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
2055.56
-
-
12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
7314.93
-
-
9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
14055.24
-
-
18 mm thick plain cement mortar bandRaised Band 1:4 in cement mortar( 1 cement : 4 fine sand):
1124.3
-
-
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
781.62
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1225.28
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
21603.31
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
21009.37
-
-
"Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied
@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)"
2034.28
-
-
WATER SUPPLY AND SANITARY INSTALLATION
-
-
-
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
31
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
31
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
12
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge.
6
-
-
Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
31
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
-
-
Providing and fixing toilet paper holder:Vitreous china
31
-
-
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
33
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
80
-
-
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
31
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
5
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
6
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
6
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
31
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length
49
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
100
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Concealed work, including cutting chases and making good the wall etc. 15 mm pipe 10kgf/cm2
180
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
60
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
60
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall
75
-
-
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
75
-
-
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
300
-
-
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2
120
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
600
-
-
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5sup0/sup110 mm bend
48
-
-
Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
360
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
24
-
-
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
60
-
-
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
60
-
-
Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
150
-
-
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionShoe (Plain)110 mm Shoe
24
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe32 mm dia
12
-
-
Providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:150 mm diameter S.W. pipe
30
-
-
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x 90 cm and 90 cm deep including C.I. cover with frame ( heavy duty ) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg ( weight of cover 108 kg and weight of frame 100 kg)With common burnt clay F.P.S. ( non modular) bricks of class designation 7.5
2
-
-
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
439.2
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
540
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
24
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
24
-
-
Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
12
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane
4.5
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane
28.8
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
21.6
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structuralnon sag elastomeric PU sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete,complying to ASTM C920, DIN 18540-F & ISO 11600Upto 10 mm depth and 10 mm width
107.4
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
27
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm
36
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
96
-
-
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm
184.1
-
-
Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineerin-charge.
69.09
-
-
WATERPROOFING
-
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For vertical surface two coats @0.70 kg per sqm
246.24
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For horizontal surface one coat @1.10 kg per sqm.
33.54
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
289.07
-
-
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade - I ( hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea- sized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with:Bitumen felt ( hessian base) type 3 grade I conforming to IS : 1322
1609.62
-
-
PILE WORK
-
-
-
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).600 mm dia piles
1014.32
-
-
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).br700 mm dia piles
1194.28
-
-
Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 800 mm dia piles
196.32
-
-
Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacityInitial test
3
-
-
Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacityRoutine test
3
-
-
Integrity testing of pile using Low Strain / Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge. Note:- The inclusion of the above item in the schedule of work shall be judiciously decided by the technical sanctioning authority, keeping in view the quality control, type of soil strata & importance of the project
15
-
-
MISCELLANEOUS WORKS
-
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)Complete as per design
12
-
-
Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions
1
-
-
Supplying and fixing high quality rubber wheel stopper of approved make, standardbrsize and required colour including all rates etc complete as per the direction of engineer in charge
18
-
-
Supply and Fixing High Quality Rubber polymer speed breakers 50mm thick (Heavybrduty) made of synthetic imported polymer material, abrasion resistance, impact resistance, tear resistancebrand longer life, weight 16 kg per metre, colour: yellow & black size: square piece 350 x 250 x 50 mm capacitybrnot less than minimum of 50 including all rates etc complete as per the direction of engineer in charge.
80
-
-
Supply and Fixing High Quality Rubber polymer End cap 50mm thick (Heavy duty)brmade of synthetic imported polymer material, abrasion resistance, impact resistance, tear resistance andbrlonger life, weight 16 kg per metre, colour: yellow & black size: square piece 350 x 250 x 50 mm capacity notbrless than minimum of 50 including all rates etc complete as per the direction of engineer in charge
6
-
-
Supply and fixing of Polycarbonate convex mirror, with strong convex mirrorsbrstronger than glass made up of unbreakable polycarbonate mirrors, highly reflective mirrors have 130brdegree of viewing angle. Viewing distance should not be less than 15metre. The bracket system on thebrbackside is used to mount it on the pole it also has an option of separate wall mounting bracket for indoorbruse and option of floor mounting bracket / stand for outdoor use and also most suitable for blind turns thebrindustry of application includes all construction sites etc complete including all rates as per the direction ofbrengineer in charge.
6
-
-
Providing and fixing of Corner guard for protecting column, made with thermo ebrpolymer, Size : width 82mm X 82 mm and an average height 800mm with outer wall thickness of 3mm andbrsupporting beams thickness 5mm having proven tensile strength 55kg per cm, elongation 50%, hardnessbr70±5 shore – A , with excellent UV resistance and water resistance including two or more PVC reflector stripbrof 18mm x 3mm on the top of profile. The profile will fixed with 6mm steel anchor fastener etc. complete asbrper the direction of Engineer in Charge.
1024
-
-
Providing and laying of hot applied thermoplastic compound 2.5 mm thick includingbrreflectorising glass beads on Concrete Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive ofbrsurface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaksbrand holes, etc complete as per the direction of engineer in charge.brData considered form MORTH , Item number- 8.13brData considered for 600 sqm
178.92
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5000
-
-
Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 1. Below 15 flush capacity
2
-
-
Supply of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots
400
-
-
Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
6.86
-
-
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-incharge (cost of sludge, dump manure and/ or good earth to be paid separately).
8.57
-
-
Supply of boulders
2.52
-
-
STRUCTURAL GLAZING AND ACP
-
-
-
Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)- cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade
316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea
water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this
sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board forTesting and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”
228.31
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in
SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places.
1070.61
-
-
WIRING AND REQUIREMENTS
-
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2500
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A
190
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
1400
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated
copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
600
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
600
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
115
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
22
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
15
-
-
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
10
-
-
supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential building)
8
-
-
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415volts "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
5
-
-
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
10
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
130
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
22
-
-
Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.
225
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
15
-
-
providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15 mm da GL pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
70
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
8
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
100
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)
150
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
420
-
-
Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip
550
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
90
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode,
including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
90
-
-
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)
6
-
-
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
12
-
-
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
96
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
400
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
150
-
-
Supplying and fixing 4 pole sheet steel enclosure on surface/ recess with connections, testing and commissioning etc. as required
8
-
-
Supply & Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required. 6sqmm 4 core PVC/ XLPE insulated armoured Al cable
70
-
-
CABLE TRAY
-
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness
300
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 300 mm width X 50 mm depth X 1.6 mm thickness
8
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
ELECTRICAL PANELS ,DB & POWER CABLES
-
-
-
Supply, conveyance, installation and commissioning of:-
MAIN PANEL : (fabircated out of 14 crca sheet) busbar: 40 x 10 x 1 copper for phase & 40 x 6 x 1 for copper for neutral 1 nos cable entry :top/ bottom base : 75 x 40 x 40 c channel earthing : 25 x 3 x 1 mm cu bus earth
INCOMER: 1 630a 4p 50ka microprocessor based mccb with 3oc, sc, e/f rom and 2 sets of spreader with interphase bareeier 1 nos metering: 1) 2a sp mcb 6 nos 2) led indication (r,y,b) 1 sets l&t/ enercon 3) mfm (v/a/f) 1 nos 4) 630/5a tape wound cl:1 15 va ct 4) nos 5 neutral link 2 nos.
OUTGOING: 1 250a 3p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 1 nos 250a fuse base 3 nos 250a hrc fuse 3 nos neutral link 1 nos ftc provision for three phase energy meter with ct 1 nos provision only 2 125a 3p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 2 nos 160a fuse base 6 nos 125a hrc fuse 6 nos neutral link 2 nos provision for three phase energy meter with ct 2 nos provision only 3 dummy space for 250a 4p microprocessor based mccb 1 nos provision only
1
-
-
Supply, conveyance, installation and commissioning of:-
UTILITY PANEL: (fabircated out of 14g crca sheet) busbar: 25 x 6 x 1 copper for phase & 25 x 3 x 1 for copper for neutral 1 nos cable entry : top /bottom base : 75 x 40 x 40 c channel earthing : 25 x 3 x 1 mm cu bus earth
INCOMER: 1 125a 4p ats 1 nos 2 125a 3p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 1 nos
METER: 1) 2a sp mcb 6 nos 2) led indication (r,y,b) 2 sets 3) neutral link 2 nos
OUTGOING: 63a 3p 25ka thermal magnetic based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 12 nos 2 40a dp 25ka thermal magnetic based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 1 nos
1
-
-
Supply, conveyance, installation and commissioning of:-
SSB 1: (fabircated out of 14g crca sheet) busbar: 25 x 6 x 1 copper for phase & 25 x 3 x 1 for copper for neutral 1 nos cable entry :top/ bottom base : 75 x 40 x 40 c channel earthing : 20 x 3 x 1 mm cu bus earth
INCOMER: 1 250a 4p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier 1 nos metering: 1) 2a sp mcb 6 nos 2) led indication (r,y,b) 1 sets 3) mfm (v/a/f) 1 nos 4) 250/5a tape wound cl:1 15 va ct 3 nos 5) neutral link 1 nos
OUTGOING: 1) 200a 3p mccb isolator with 3oc, sc, rom and 2 sets of spreader with interphase bareeier 2 nos 2) 160a 3p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 2 nos 3) 125a 3p 35ka microprocessor based mccb with 3oc, sc, rom and 2 sets of spreader with interphase bareeier +neutral link 1 nos
1
-
-
Supply, conveyance, installation and commissioning of:-
APFC PANEL: (fabircated out of 14g crca sheet) busbar: 25 x 6 x 1 copper for phase & 25 x 3 x 1 for copper for neutral 1 nos cable entry : top / bottom base : 75 x 40 x 40 c channel earthing : 25 x 3 x 1 mm cu bus earth
INCOMER : 1) 125a tpn isolator 1 nos metering: 1) 2a sp mcb 6 nos 2) led indication (r,y,b) 1 set 3) neutral link 1 nos 4) apfc relay, 6 stage 1 nos 5) auto/manual switch 1 nos 6) auxiliary contact 4no 4nc 4 nos OUTGOINGS: 1 32a tp mcb 1 nos 2) 25a tp mcb 3 nos 3) 15 kvar capacitor duty contactor 1 nos 4) 5 kvar capacitor duty contactor 3 nos 5) 15 kvar heavyduty, box type resin filled capacitor 1 nos 6) 5 kvar heavyduty, box type resin filled capacitor 3 nos 7) red push button with element 4 nos 8) illuminated green push button with nc element 4 nos 9 )provision for fixing 3 nos 10 kvar capacitor 3 nos provision only
1
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker
suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
140
-
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
12
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
16
-
-
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
10
-
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
10
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
8
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
10
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current
circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
8
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
2
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
S & F Motor starters of the following ratingsSemiautomatic star delta starter for 5 to 7.5HP motor
3
-
-
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
13
-
-
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP
42/43)
9
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm
20
-
-
& laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.2 core 16 sq mm
20
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3 core 185 sq mm
50
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 35 sq mm
195
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm
20
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV garde of the following sizes in the existing RCC/HUME/STONE WARE/ GI/DWC pipe as required 3.5 core 120 sqmm
20
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 185 sq mm
70
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 400 sq mm
20
-
-
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 4 core 16 sq mm
70
-
-
Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 1 Run
25
-
-
Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm
1
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)
4
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
14
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
2
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
2
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
6
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)
2
-
-
OBSERVED DATA
-
-
-
Supply, Installation, Testing & Commissioning of 20 W, system efficacy br100lm/W, Integral Surface Mounted Device (SMD), IP 66, LED Bi-directional WallbrLight with housing made with Extruded Aluminum, for better heat dissipation.brProduct comprising of LED with 3000K. LED make shall be of Cree/Osram/brNichia/Ever light/Samsung. Fixtures should have tough ended glass with 22°brBeam. The luminaire shall have IP66 protection. The LED shall be compliant withbrUseful L70 life of 50000 Hrs. LED Driver shall be Isolated type, Constant Voltagebrtopology driver in metal enclosure with IP 66 Protection. Driver efficiency shouldbrbe 85% & proper heat sink for heat dissipation suitable to operate in input voltagebrrange of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surgebrprotection. LED driver shall have output short circuit & over voltage protectionbrinbuilt
20
-
-
Supply and Installation of LED outdoor wall light, 15W with Aluminium pressurebrDie cast housing
,diffuser, Toughened glass cover with IP67 protection, Highbrefficiency LED mounted on aluminium heat sink for effective heat dissipation,brElectronic driver duly wired up to terminal block. CRI
70,Temperature range- 0 tobr50DegC, Driver efficiency85%, Power factor0.95, THD10%, ColourbrTemperature- 2700K, Multistage Isolated Constant Current-Constant VoltagebrOperated driver with range 150-270V AC and Safety Extra Low Voltage Safebrlevel60V DC as per IEC
standard. and System efficacy100lm/W
40
-
-
Supply and Installation of outdoor type LED bulkhead luminaire 10w, with HightbrTransmittivity Diffuser
for better light output and uniform light distribution withoutbrglare. Driver and accessories are pre-wired for easy installation and long service.brCRI70, LED efficacy 100lm/W, including accessories and giving connections asbrrequired
65
-
-
Supply and Installation of Slim panel Surface mounted LED downlighter 18W, withbrhousing made up of die cast aluminium for better heat management. HightbrTransmittivity Diffuser for better light output and uniform light distribution withoutbrglare. Driver and accessories are pre wired for easy installation and long service.brCRI70, LED efficacy 100lm/W,
670
-
-
Supply, conveyance, installation and commissioning of 82.5KVA Diesel generator set with integral acoustic enclosure as per CPCB Norms with AMF control panel with accessories. Make of engine: Kirloskar/cummins/equivalent type, Liquid cooled Diesel engine consisting of Fly Wheel with starter ring, Lub Oil filter, Air cleaner, Residential Silencer, 12V starting system with starter, alternator charging ammeter, expansion bellows, Lub Oil cooler, Lub Oil filter, Centrifugal bypass filter, radiator, radiator fan and mounting, In-line monoblock fuel pump with governor, Battery charging alternator, engine control panel consisting of OFF/ON/START switch keys, lub oil pressure gauge, lub oil temp, gauge, Liquid temp. gauge, charging ammeter, engine protection system for low lub oil pressure and high Liquid temp, 12V stop solenoid with mounting. The engine shall generally confirm to IS 10002:1981, BS 5514 DIN6217, ISO 3046 standards. Alternator make Kirloaskar/Stamford/kel/ Make 82.5 KVA, 66 KW, 3 phase, 415V, 0.8.p.f, 4 wire 50hz at 1500 - RPM self - excited and self-regulated alternator. The voltage regulation will be +/-1% (for Brushless type).The insulation system is class “H”. The alternators are designed, built and tested to IS 4722/1992. BS 5000 part 99, IEC: 34 -1 or any other equivalent Indian or international standards. Control Panel as per Kerala Electrical Inspectorate requirement, floor mounting type, totally enclosed sheet metal suitable for above Alternator incorporating with EMS KG640, CTs of suitable ratings, indicating Lamp’s, “LOAD ON & SET RUNNING”, MCCB, KWH METER, Electronic Earth Fault Relay. Micro Processor based engine controller with Remote Monitoring facility, Std. Control Panel with 3P/4P MCCB, 125A (fixed type) and necessary accessories such as MFM,separate energy meters etc with 36 months comprehensive warranty from date of commissioning. Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent cano py shall be of nut bolt type construction. Critical processes of punching is done on CNC machines to maintain dimensional accuracy of holes within 0.1 mm. Power coating is done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material. Four hinged doors shall be provided to canopy, one door shall have glass window for Engine control panel. Sound level will be 75 dB at a distance of one meter on free field conditions as per CPCB norms
1
-
-
Supply, Installation, testing and commissioning of 6kVA standalone UPS system, UPS with 1PH input and 1PH output as per technical specification with SMF Battery Set for 30 minutes back up , inclusive of adequate battery, battery rack, interconnecting cables , battery isolation device, etc. with all accessories required for complete installation
1
-
-
Supply, conveyance, installation and commissioning of 250KVA Unitised SubStation, 11KV/433V, 3 phase, vector Dyn-11,Copper wound, Cast resin dry type transformer with offcircuit tappings from +5% to -10% in steps of 2.5%, changeable on offcircuit by tap links provided, with WTI, WTI Scanner & LV terminals suitable for Microproccesor based 630A 4P MCCB, LT CTs for LT TOD, NCT, 2 runs of PVCA cable and HV terminals connected to 11KV, 630A,26.3kA VCB panel with incoming suitable for XLPE cable and output connected to 11KV seal off bushing to the transformer, enclosed in 2mm thick CRCA enclosure.Temperature scanner with trip mechanism and annunciator shall be provided. All interconnections from HT load breaker switch to transformer and transformer to LT breaker shall be given using electrolytic copper busbar insulated with heat shrink sleeves and tinned at the point of contacts. All internal earth connections are to be given as per standards. Necessery provision must be provided for giving cable connection of HT as well as for LT side, CT energy meter for audit purpose. The USS shall be installed as per the direction of engineer in charge.
1
-
-
Supply and Installation of 12KV ring main unit,outdoor type with enclosure,rated short time withstand(main and earth) 20 kA 3 seconds, 630A continuos,rated current, Normal ambient temperature -
25 °C to + 40 °C, IP 67 Rated Highbrvoltage live parts, SF6 tank, 300 mm2 three core or 500 mm2 single corebrmaximum cable size, fuses confirming to IEC 60282-1, DIN 43625,
1
-
-
Earthing with GI Earth plate 1200mm x 1200mm x 12 mm thick including accessories and providing masonry enclosure with coer plate having locking arrangement and watering pipe of 2.7m longetc with charcoal/coke and salt as required.
9
-
-
Supply, laying and termination of one number A2XFY / XLPEbrpower cable of 11 kV grade of following size direct in groundbrincluding excavation, sand cushioning, protective covering andbrrefilling the trench etc. as required.br3C 185sq.mm
90
-
-
Supply and Installation of LT cable route marker, cast Iron, spike and inscription L.T Cable
10
-
-
Supply and fixing of 3 phase ,4wire ,110 V(L-L),-/1A CT or -5/A CT,accuracy class 0.2,TOD meter in existing metering provision
1
-
-
Supply and Fixing of exhaust pipe for DG using MS C Class pipe of 80 mm dia including accessories and clamping etc.
20
-
-
Supply and Installation of IP 65 rated polycarbonate empty enclosure for accommodating test joint of
lightning protection.
6
-
-
Supply and Installation of 7.5 HP Centrifugal monoblock pump, min. discharge 600LPM, 15m head.
440V, B class insulation, IP55 protection, Cast Iron/ Bronze/ Stainless steel Impeller, with cast iron delivery casing, Cast Iron Motor Body, with carbon steel/ stainless steel Pump Shaft, with Mechanical
seal for ingress protection.
1
-
-
Painting of letters/figures of sizes 2.5, 4cm or 5cm height using synthetic enamel paint.
250
-
-
PART 2 - LIFT
-
-
-
Supply, Installation,Testing and Commissioning of 8 passenger Lift machine room less type gearless with the following specification including all required standard features.
1 .Type of Lift: 8 Passenger capacity , Gearless (Machine room less type ) 2. Load / Persons :544 Kg. / 8 persons 3 .Rated speed : 1.50 M/Sec. 4.Travel :25 Mtr ( Approx) 5. No. of floor and entrance served- 6: 6 stops and 6 openings on same side 6. No. of floor served :six floors 7. Method of control : Micro processor based V3F with ARD system. 8. Location of machine room: inside lift well 9. Size of lift well :2150 mm (wide) X 1550 (depth) mm 10. Car entrance: As per IS 11. .Leveling accuracy : As per IS 12. Car door opening : As per IS 13. Drive : Variable voltage variable frequency(V3F) 14 .Operation : Simplex full selective collective control with ON/OFF switch 15. Construction of design and furnishing of car body work: Vandal proof Stainless steel (SS304l) finish cabinet with Scratch proof Stainless steel door(sheet 1mm thickness), Stainless steel mirror finish ceiling, Aluminium 3 mm minimum thickness anti skid flooring, fan with timer cut-off, push to talk, LED display, LED light, hand rails and floor announcement system. All buttons in car and all landings should have Braille sign. 16. Landing entrance : Automatic centre/Telescopic sliding opening Vandal proof stainless steel sliding door as per ISS with provision for mechanical opening key for emergency with full length infra red light curtains and 2 hours fire rated SS finished doors. 17. Call and position indicators : Up/down direction & position Dot Matrix LED indication shall be provided at all landings 18. Electric supply : 1) Light 230/50C/s single phase 2 wire system. 2) 415V 50C/s 3 phase 4 wire system. 19. Infra red door opening system: To be provide for entire length of the door 20. Automatic Rescue Device :Provide automatic rescue device with an electronic controller powered by maintenance free batteries with capacity for minimum four rescue operation . The rescue
operation should act within 30 seconds of power failure 21. Regulation :350V- 450V (SMPS based) 22. Indication in the car : a) Car position b) Call indicator c) Door close/open push button d)Flush mounted switch for fan and light e) Battery operated emergency lamp with rechargeable batteries. f) Battery operated alarm bell g) Firemans switch at main lobby h) Auto attendant control (inside the car) 23. Winding handle Manual winding handle for use in emergency. 24. Safeties a) Over speed governor, operated safety gear b) Buffers c) Motor over load protection d) Phase reversal protection e) Other safeties as per ISS f) Single phase preventer g) Final limit switch 25. Leveling Automatic leveling at all landing as per IS 26. Guarantee: Company shall carry out free maintenance during warranty period of 36 months which also includes a) Cleaning lift equipment b) Lubrication of all moving parts c) Replacing of lubricating oil when required d) Checking and adjusting contacts e) Replacing fusible item alarm etc. f) Recharging batteries in case of drain/ renewing batteries g ) Replacing /rewinding of all defective parts of the lift including motors and V3F unit. 27. Control panel :Control panel will be dust and vermin proof of sheet metal enclosure 28. Announcement System: To provide lift announcement system 29. Tests :At site test as per IS to be carried out and approval from Electrical Inspectorate before Handing over. 30. Scope of work:- a) Supply of lift materials b) Scaffolding c) Door frames d) Supporting steel e) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. f) Battery operated alarm g) Obtaining lift license from the electrical Inspectorate. Necessary fee shall remitted to the Inspectorate by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. h) Supply of book let with complete details of maintenance schedule and control diagram. i) Giving training to department staff for attending trouble shooting j) Free servicing for 36 months after handing over.
1
-
-
FIRE FIGHTING
-
-
-
Supply, installation, testing and commissioning of Jockey pump of inline vertical pump of 180 LPM 56m head, mechanical seals, stainless steel shaft high efficiency volute type with stainless steel casing, stainless steel impeller, pump connected with cross coupled to a squirrel cage induction motor totally enclosed fan cooled (TEFC) type of suitable HP, with a supply condition of 415V, 3 phase, 50 Hz,2900 RPM including installation of all accessories as per the functional requirements of OEM
2
-
-
Supply, installation, testing and commissioning of Electric driven Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm @ 56 m head
2
-
-
Supply, installation, testing and commissioning of Diesel engine driven Fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, nstruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. 2280lpm @ 56m head.
1
-
-
Supply, installation, testing and commissioning of electrically driven Terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 900lpm @ 20m head
1
-
-
Fabrication, Supply, Insallation, Testing & Commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, 2100mm height, compartmentalised with hinged lockable doors,dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnecton with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pumps, pressurisation pumps & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : .INCOMER: 250 A 4P isolator continuous duty, 415Volts A/C, 3 phase and neutral Aluminium busbar with colour coded heat shrink sleeves supported on SMC type grip supports 35kA. RYB phase indicating lamps (lamps shall be of LED) with control fuses /MCB 2A - 6 sets. Single-phase digital ammeters with range 0-250A - 6 nos. CTs - ratio 250/5A 15VA CL-1 - 6 nos. Voltmeter selector switch with three phase digital voltmeter range (0-500) V complete with fuses - 1 no. OUT GOINGS : (a) Main fire pump 200A 35kA TP Isolator - 2 Nos Fully Automatic star delta starter without protection,suitable for 60hp fire fighting motor application complete with all necessary accessories as required -2 Nos (b) Jockey pumps 63A 35kA TP Isolator - 2 Nos 10kW Star delta Starter suitable for fire fighting motor application complete with all necessary accessories as required -1No (c) Diesel Engine Control (i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode. (ii) Indicating lamp for High/Low lubricant Oil pressure, High water temperature and Engine ON indication. (iii)Battery charger suitable for 12V/24V DC with boost and trickle selector switch, 0-30V DC voltmeter, 0-20A DC ammeter. (iv) All standard relays and accessories for automatic operation of the diesel engine. (v)All accessories required for lockout and other functions as per the specifications. SYSTEM CONTROLLER Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification.The panel is with complete accessories/units for the working of the system.
1
-
-
Supply, installation, testing and commissioning of GI Heavy class pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and pipes are joint by D.I. Grooved Fittings with FM & UL approval and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc. 200 mm dia
50
-
-
Supply, installation, testing and commissioning of GI Heavy class pipes with ISI Mark (IS 1239/3589) complete with all accessories such as bend, reducers, tees etc, including excavation in foundation trenches or drains including dressing of sides and ramming of bottom, and pipes are joint by D.I. Grooved Fittings with FM & UL approval and getting out extra excavated soil and back filling of trenches with available excavated earth, consolidated layer by ramming and watering etc. Pipes shall be coated with two coats of asphaltic primer and wound with polymeric mix of reputed make and supported at standard intervals and at all tee joints, bends/ offsets etc. 150 mm dia
200
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 200 mm dia.
50
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 150 mm dia.
80
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 100 mm dia.
100
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 80 mm dia.
90
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 65 mm dia.
120
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 50 mm dia.
180
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 40 mm dia.
150
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 32 mm dia.
100
-
-
Supply, installation, testing and commissioning of GI Heavy Class pipes with ISI Mark (IS 1239/3589) complete with all fittings such as nuts and bolts, bends, flanges etc. Supporting the pipes using MS Channels/Angles in walls/structures at required intervals as specified for fire fighting works. Piping shall have one coat of anticorrossive epoxy based industrial primer and two coats of epoxy based paint of IS approved colour code, one coat before erection and final coat of epoxy paint shall be painted after erection. 25 mm dia.
400
-
-
Supply, installation, testing and Commissioning of Yard Hydrants of gun metal body with stainless steel male instantaneous inlet couplings complete with cap and chain as required
8
-
-
Supply, installation, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 200 mm dia
4
-
-
Supply, installation, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 150 mm dia
4
-
-
Supplying and fixing, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 100 mm dia
6
-
-
Supply, installation, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 80 mm dia
4
-
-
Supply, installation, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 65 mm dia
8
-
-
Supply, installation, testing and commissioning of double flanged butterfly valve of rating PN 16 bar with aluminium body, stainless steel disc, integral seat, ISI marked complete with nuts, bolts, washers, gaskets etc. 50 mm dia
8
-
-
Providing, installation, testing and commissioning of Non-return valve 200 mm dia of IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required
2
-
-
Providing, installation, testing and commissioning of Non-return valve 150 mm dia of IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required
4
-
-
Providing, installation, testing and commissioning of Non-return valve 100 mm dia of IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required
8
-
-
Supply, installation, testing and commissioning of stainless steel Ball Valves 50 mm dia with necessary fittings of screwed end type with IS0 17292.
12
-
-
Supply, installation, testing and commissioning of stainless steel Ball Valves 40 mm dia with necessary fittings of screwed end type with IS0 17292.
12
-
-
Supply, installation, testing and commissioning of stainless steel Ball Valves 32 mm dia with necessary fittings of screwed end type with IS0 17292.
12
-
-
Supply, installation, testing and commissioning of stainless steel Ball Valves 25 mm dia with necessary fittings of screwed end type with IS0 17292.
12
-
-
Supply, installation, testing and commissioning of Air Release Valve Gun metal body Horizontal Lift Type Having Screwed ends as per ISO Mark of following size as required. 25mm dia
2
-
-
Supply, installation, testing and commissioning of automatic quartzoid Pendant type / upright type Sprinkler Bulbs of 15 mm BSP thread having a temperature rating of 68 deg centigrade with complete accessories and Ul certification.
310
-
-
Supply & installation of Hose Cabinets to accommodate hose pipe along with male and female coupling. The single door cabinet is made up of FRP sheet with glass fronted hinged doors and lock, painted with authority approved colour.
20
-
-
Supplying and fixing Double headed hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 with stainless steel cap and chain with necessary orifice plate, GI tee tapping from the wet riser, distant piece & all accessories as required.
12
-
-
Supply, installation, testing and commissioning of stainless steel ISI marked Branch pipe with 63 mm female hexagonal base nozzle, suitable for instantaneous connection to interconnect hose pipe coupling as required
12
-
-
Supplying and fixing 63 mm dia 15 mtr long RRL hose pipe with 63 mm dia Male and Female stainless steel couplings duly binded with GI wire, rivets etc conforming to IS 636 (type-A) as required.
20
-
-
Supply, installation, testing and commissioning of Hose Reel meeting EN 671-1 standards, compact type complete with swing type drum, fitted in vertical rising mains / walls/ structures with U Bolts or with M 12 anchor bolts, including 25 mm dia PVC rigid braided hose in 36m length, fitted with 25 mm bore shut off nozzle and all other necessary fixing materials.
12
-
-
Supplying and fixing 4 Way FBI ( Fire Brigade Inlet ) of gun metal body with 4 Nos. stainless steel male instantaneous inlet couplings complete with cap and chain as required. For 150 mm dia G.I. Pipe connection conforming to IS : 904 as required.
4
-
-
Supply and installation suspended Clean Agent type Fire extinguisher filled with HFC 227ea (FM 200) environmental friendly gas having a working pressure of 30kg/sq.cm with discharge time 10-12 seconds, heat sensitive glass bulb sprinkler having a temperature rating of 68 degree complete with mounting accessories, pressure indicating guage, discharge tube, etc. with UL Listed approved
2
-
-
Supply and Installation of CO2 type fire extinguisher with fully charged with installation brackets, BIS-2190 with ISI Mark. 4.5 kg.
14
-
-
Supply and Installation of DCP type fire extinguisher complete with fully charge, discharge hose wall mounting brackets, BIS-2190 etc. and with ISI mark.5 Kg.
14
-
-
Supply, Installation testing and commissioning of Microprocessor based conventional type Fire Alarm Control Panel of 8 zone, including battery charging system and maintenance free batteries with all accessoriesfor the alarm system with auto alert facilities and made MS steel wall mounting with locking arrangement duly painted as per the fire standard requirement
1
-
-
Supply, installation, testing and commissioning of Manual call point with inbuilt short circuit isolators, PVC Body.
12
-
-
Supply, installation, testing and commissioning of flasher cum hooters with inbuilt short circuit isolator of 6W.
12
-
-
Supply, installation, testing and commissioning of Smoke detectors with inbuilt fault isolator with suitable base for cable termination and mounting of detectors complete with all accessories
30
-
-
Supply, installation, testing and commissioning of Heat detectors with inbuilt fault isolator with suitable base for cable termination and mounting of detectors complete with all accessories
8
-
-
Supply, installation, testing and commissioning of flow switches on sprinkler distribution header on each floor and shall be connected to the fire alarm panel.
12
-
-
Supply and fixing of fire alarm system copper cable, 2 Core 1.5 sq.mm along existing PVC conduit and giving connections as required.
600
-
-
Supply and fixing of 100W PA Amplifier including accessories and giving connections as required.
1
-
-
Supply and fixing of Microphone for intelligible, crisp and bright sound suitable for all types of PA applications supplied with quick detachable holder with 3 pin professional XLR connector & 6 mtrs, twin core shielded low noise cable.
2
-
-
Supply and Installation of 8W wall-mounted speaker for PA system including connections as required.
20
-
-
Supply and fixing of 2 core 1 sq.mm audio cable for the PA system in the existing conduit, including giving connections as required.
300
-
-
Supply and installation of Fire Barrier mortar (minimum 65mm thickness) with minimum two hours fire rating when tested in accordance with UL 1479 standards, for fire rated vertical openings in floors or slabs and floors made of concrete, masonry, metal, gypsum partition, after passing service lines like Cable,Cable trays, Bus Duct or Metal pipes etc.
10
-
-
Supply and installation of Expanding Fire stop foam with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, shall be used to seal highly dense areas or less accessible areas which cannot be sealed with fire stop mortar properly.
10
-
-
Supply and Fixing of Exit Way signages, LED Exit / Egress Edge lit lights with rechargeable battery 24x7 working., conform to IS 9581-1981, 22 SWG CRCA white powder coated housing having input voltage of 230V 50Hz.
60
-
-
Supply and Fixing Assembly point boards size as per authority norms made of metal.
1
-
-
Supply and fixing Fire Escape Route size as per authority norms.
12
-
-
Supply and Fixing of other Fire Sign boards sizes as per authority norms made of metal
30
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements