Smart City Thiruvananthapuram Limited Tender

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 25 sq mm

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 0.75 sq mm

MV CABLE END TERMINATIONS

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

Supplying and making outdoor end termination with cast resin compound including aluminiumlugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm

Supplying and making end terminal with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4 x 6 sqmm (22 mm)

SITC OF FEEDER PILLER

Supply, installation, testing and commissioning of cubical type LT panel suitable for 433 V, 3 Phase, 4 Wire 50 Hz supply system having surface area 0.945 sqmtr (450 x 450 x 300 mm)fabricated from CRCA sheet steel of 2 mm thick for frame work, cover and gland plates, with front opening, cleaning and finishing complete with 7 tank process for power coating, bottom base channel of MS section not less than 100 mm x 100 mm x 6 mm thick and supported on two pedestal of MS section not less than 100 mm x 100 mm x 6 mm thick and 2.5 meter long. The cubical shall be totally enclosed type with IP 65. The cubical is wired for accommodate Energy meter and Astronomical timer and shall be provided with FP 32 A FP MCB, 40 A FP Isolator, 6A Amp SP MCB, and LED Indicators. Work includes all work for foundation like excavation, PCC, brick work, plastering finishing etc and as per specification as required for fixing Astronomical timer and KSEB Energy meter

Supply, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12/24 hour display format withsuitable battery and indication for relay status suitable for 3 output (1output per phase) and suitable for three phase supply

Supply installation testing and commissioning of FEEDER PILLER IP55 OUTDOOR: (FABRICATED OUT OF 16G CRCA SHEET) BUS BAR : 32 X 10 X 1 ALUMINIUM FOR PHASE & 32 X 6 X 1 ALUMINIUM FOR NEUTRAL, CABLE ENTRY : TOP / BOTTOM BASE : 75 X 40 X 40 C CHANNEL EARTHING : 25 X 3 X 1 mm CU BUS EARTH INCOMER: 250A FP MANUAL COS 1 NOS METERING: 1) 2A SP MCB 12 NOS 2)LED INDICATION (R,Y,B) 2 SETS 3) VOLTMETER (0-500V) 2 NOS 4) VOLTMETER SELECTOR SWITCH 2 NOS 5) AMMETER 2 NOS 6) AMMETER SELECTOR SWITCH 2 NOS 7) 250/5A TAPE WOUND CL:1 15VA CT 6 nos 8) NEUTRAL LINK 2 NOS OUTGOING: 63A TPN SDF 1 NOS 2)63A HRC FUSE 3 NOS 3) 32A TPN SDF 3 NOS 4) 32A HRC FUSE 9 NOS

EARTHING

Supply and installation of 1.5 meter 32 mm Medium class earth pipe for Meter box Earthing

Earthing with G.I. earth pipe 3 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.06 mm GI conductor (8 SWG)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip

CIVIL WORKS

Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

SUPPLY & LAYING OF DWC PIPES

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation110/94 mm or nearest size

Fittings

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.brAbove 6.5 mtr and upto 8.0 mtr

Manhole - Civil Works

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete (Measurements to be taken of the face area timbered).Depth not exceeding 1.5 m

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

EHD - 35Circular shape 560 mm internal dia

Ambient Lighting

Supply and Installation testing and commissioning of Tree up lights 40 W Architectural Functional LED Flood Light, Installation on Pole /Wall / Ground Mounting, Made of Die-cast Aluminium housing. Glass diffuser: extra clear, fixed through a robotic gluing system & provided with SS 304 Allen Screws. The luminarie has to be marine paint coated The entire painting process of the Aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Protection rating: IP66. Class of insulation: Class I Installation: the luminaire is equipped with 300mm of cable for an easy-to-make connection. LED service life lasts 50000 h before luminous flux is reduced to 80% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Colour temperature RGBW. Luminaire wired with halogen-free leads. Wattage : CREE XML LED, CRI: 70,LED Make:OSRAM model:HLOB-27-40-CW or equivalent CCT: RGBW, Optics : 90°,Lumen: 3610 (delivered), Controls: DMX, Finish : Grey, Weight: 4.1Kg, Driver: Meanwell / Inventronics or equivalent, Accessories: Male / Female IP 68 Connectors / Glare Louvers / Knuckle Joint etc as required including weather proof junction boxes with suitable connectors to connect the supply cables and for mounting the fittings the foundation 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) foundation in size of 150 MM X 150 MM X 450 MM (Length X width X Depth), foundation bolts of the bollard light shall be grouted in the foundation with 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface. Or as per the OEM design as per the site condition

Supply and Installation testing and commissioning of Bollard lights 15W Cylindrical shaped powder coated aluminum pressure die housing Robust and stylish which ensure low cost of ownership with a low glare, clear acrylic diffuser allows an attractive visual comfort with good downward symmetrical light distribution, More than 65% energy savings compared to conventional lighting solution. IP65, High Ingress protection against dust & moisture Wattage: 15W Size : Dia. - 80mm, Height -400 to 1000 mm,Diffuser: UV Stabilized opal one piece PMMA Housing types: Powder Coated Aluminium tubular sections Lamp types & Wattages: LED :15W,LED Make:Halonix, Model:HLOB-15-WW or Equivalent ,Ingress Protection: Optical Compartment IP66 Lengths : 400 to 1000 MM Rated Voltage & Frequency : 240V, 50Hz,THD 10%,Power Factor : 0.95,CCT : 3000K,Driver Efficiency : 85%,preferred LM79 & 80certified. Suitable outdoor boxes with necessary terminals to connect the i/c and o/g cables. Suitable foundation 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including foundation bolts for the bollard light and 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface. Or as per the OEM design.

Supply and Installation testing and commissioning of 120W Flood Light LED OSRAM MAKE, Model:120W HLFLD-ML14-120-CWL-R01-B or model:HLFLD-120-CWL or equivalent ,As per IS 10322 (Part-5/Sec-5) & IEC 60598-1, Product Description: Energy efficient 120W LED Flood Light Main Housing / Heat Sink Material: Aluminum PDC,CG Box Material: Aluminum PDC Front Cover Material: Clear toughened glass,Lens: Suitable high efficient secondary lens LED: LM80 certified LED ,LED Make:OSRAM, model:HLFLD-120-CWL, Lumen Maintenance: 50000 hours @ L70, Control Gear: Isolated, Electronic, CC Driver, Internal Wiring: Insulated Cu wire, Hardwares: SS & MS Zinc plated and passivated, Ingress Protection: IP66, Impact resistance: IK05, Operating Voltage Range: 140V~270V, Operating Temperature: -10C~ 50C and for mounting the fittings with foundation 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) foundation in size of 150 MM X 150 MM X 450 MM (Length X width X Depth), foundation bolts of the bollard light shell be grouted in the foundation with 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface. Or as per the OEM design

Supply, installation, Testing and Commissioning of 40W LED Decorative Post top Luminaire, BIS certified with a grey painted top made high pressure die casted aluminium and three supporting ribs made of high pressure die casted aluminium, a structured polycarbonate protector (IK08) permanently sealed with the body to achieve separate IP66 optical & IP65 control gear compartments. Suitable for post top mounting on 76mm OD diameter pipe. All hardware shall be of stainless steel for longer life.The optics of the luminaire shall be designed for efficient symmetric light distribution providing excellent photometry. Design life shall not be less than 50,000 burning hours @ L70. The light engine shall incorporate mid power LEDs in the Luminaires.Overall luminous efficiency of luminaire shall be 100 Lm/W ± 7% at correlated colour temperature (CCT) of 3000K with tolerance as per ANSI standard , colour rendering index (CRI)70. Electrical Class I, rated voltage 240Vac, Power Factor 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV . Shall be supplied pre-cabled (0.3m) for easy installation.Protection features: Short Circuit and Open Circuit Protection for LED. It should survive input voltage stress of 440V for 8 hours. Model : kesslec Wels 40W WW LED post top or Equivalent model

Supply, Installation, Testing and commissioning of 3m height decorative pole made of mild steel/steel tube with IS 1161/IS 3601, minimum of not less than 2.5 mm thickness. It shall have Mo sections. Bottom shall be minimum height of 1M with bottom dia of the shall be 114 m. The upper section shall be not less than with minimum dia of 76 mm. The Pole is to be a suitable surface mounting base plate (steel of grade to IS 2062: 2011) and welded at the bottom ofthe with supporting gussets Pole shall be mounted on square base plate, suitable for mounting on 4 nos bolts. The Pole Shaf pipe should be fabricated out of Steel tube of grade YST 2101240. The pole shaft and base plate shall be Hot dip galvanized to 65 micron there after two coats of epoxy primer third layer of Pu paint to 100 micron for marine coating protection (7 Stage process) as per IS 2629 before the coating of epoxy primer. Poles using pre galvanized steel tubes or hot dip galvanized through double dip process are not acceptable. Complete pole shall be treated with high quality epoxy zi rich penetrating primer 45 microns and thereafter coated with Polyurethane paint to minimum average DFT of Controlled paint drying process shall to ensure proper adhesion and finish of the paint. pole shall provide with Marine grade Painting. T shall conform to IS 12944 for CS Mx ist of 6A MCB with built in terminals for housing 3.5 core Sq MM armoured aluminium cable. The pole shall of ‘composite’ construction designed to specified ‘dead load’ pertaining to luminaire and its mounting accessories and ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage the structure. Decorative Hot dipped Galvanised bracket on the post top and at differential height tightened to pole with stainless steel grub screws to mount luminaries and for mounting the fittings with foundation 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) foundation in size of 250 MM X 250 MM X 1200 MM (Length X width X Depth), foundation bolts of the bollard light shell be grouted in the foundation with 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface or as per the OEM design . Similar to Make kesslec Cat Ref: kesslec HDGI 3mt classic pole pu painted

Supply of 7W LED Step Light, with a grey painted body and cover made of die-cast aluminium, a PMMA protector sealed to the body and a silicone gasket to achieve IP67 tightness level and making the luminaire suitable for outdoor use. The luminarie shall have impact resistant of IK 08. An installation kit, made of polypropylene facilitates its installation in wall or stairs and making it blend into the architecture. The optics of the luminaire shall be designed for efficient asymmetric light distribution. Design life L70 shall not be less than 50,000 burning hours. Overall luminous efficiency of luminaire shall be 50brlm/W ± 7% at correlated colour temperature (CCT) of 4000K with tolerance as per ANSI standard, colour rendering index (CRI) 80. Electrical Class I, rated voltage 240Vac, Power Factor 0.90 and THD 15%. Shall be supplied precabled for easy installation. Similar to Kesslec Make Kew Steplight 7W LED or Philip BWG150 LED50/WW PSU 220-240V IP67 7043 or Equivalent.

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

Labour Charges for tracing and testing the existing cable line and cable route.