Rubber Park India Private Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 2,975Tender Fee
Refer Documents
Summary
Construction Of Canteen And Office Building At Rubber Park Piravanthoor Kollam
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_RPI_424275_1Bid Award Id
ViewTender No
RPP/D/C/01R/21Tender Authority
Rubber Park India Private Limited ViewPurchaser Address
-Website
http://http://www.rubberparkindia.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil with all leads, and lift 3.0 m to 4.50 m as directed by the Engineer-in-Charge. :- All kinds of soil
11
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, with all leads , as directed by the Engineer-in-Charge. :- Ordinary Rock
1
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated material and disposal of surplus excavated material, with all leads and lift 1.50 m to 3.00 m as directed by Engineer-in-Charge. :- Ordinary Rock
1
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, with all leads , as directed by Engineer-in-Charge. :- Hard Rock require blasting
1
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated material and disposal of surplus excavated material, with all leads and lift 1.50 m to 3.00 m as directed by the Engineer-in-Charge. :- Hard Rock require blasting
1
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations embankment etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, with all lead and lift as directed by the Engineer-in-Charge.
147
-
-
... More
Anti termite Treatment of soil using chemical emulsion using chlorpyriphos/ Lindane E.C. 20% with 1% concentration. @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor, as directed by the Engineer-in-Charge.
255
-
-
... More
Concrete Works
-
-
-
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level :
29
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification and as directed by Engineer-in-Charge.
350
-
-
... More
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
4
-
-
... More
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. excluding cost of centering, shuttering, finishing and reinforcement : All works up to plinth level
53
-
-
... More
Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
71
-
-
... More
Steel reinforcement for R.C.C. work with Thermo-Mechanically Treated bars of grade Fe-500 D or more. including straightening, cutting, bending, placing in position and binding all etc. complete for all heights as directed by the Engineer-in charge
13250
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height : - For foundations, footings, bases of columns etc. for mass concrete.
68
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height :- For Walls (any thickness ) including attached pilasters, butteresses, plinth and string courses etc.
221
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height : - For Lintel, beams, plinth beams, griders, bressumerss and cantilevers
222
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height :- For Suspended floors, roofs, landings, balconies and access platform.
371
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height :- For Columns, Pillars, Piers, Abutments, Posts and Struts.
112
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all height :- For Edges of slabs and breakers in floors and walls.
203
-
-
... More
Masonry Works
-
-
-
... More
Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete as directed by the Engineer-in-Charge.
8
-
-
... More
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure from plinth up to floor V level thickness 20cm and above in CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete as directed by the Engineer-in-Charge.
126
-
-
... More
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure above plinth level up to floor five level for 10 cm thick wall in CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete as directed by the Engineer-in-Charge.
16
-
-
... More
Honey-comb brick work 20cm thick with common burnt clay bricks of class designation 7.5 with cement mortar 1:4 (1 cement : 4 coarse sand) for Soak pit , Liquid waste tank etc complete as directed by the Engineer-in-Charge.
32
-
-
... More
Providing and fixing partition wall at all height including providing and fixing of Aluminium channel(size 65x35x35, 3mm thick) frame work made of special sections, vertically at 450 mm centre to centre, and minimum 4 Nos (1 each at bottom and top and remaining 2 at intermediate) horizontal members fixed with angle clates, dash fastener, nut and bolts of required size and shall be fixed /anchored to walls/floors/ceiling with the help of rawl plugs at 450 mm centre to centre, with 25 mm long dry wall screws, including fixing of 10 mm thick V board (cement board) to both sides of channel frame work with the help of screws including filling the inside fully with glass wool, jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for doors and widows light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting.
53
-
-
... More
Dry rubble masonry with hard stone in foundation and plinth including cost of through stone and bond stone including cost of all materials, labour charges etc complete for retaining wall as directed by Engineer-in-Charge
29
-
-
... More
Dry rubble masonry with hard stone in superstructure above plinth level and up to floor five level including cost of all materials, labour charges etc complete for retaining wall as directed by the Engineer-in-Charge
29
-
-
... More
Water Proofing
-
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge ( for water proofing mix required chemicals as per direction, which will be paid separately )over retaining wall, including cost of all materials, labour charges, curing etc. complete
93
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers and as per the directions of the Engineer-in-Charge :- For retaining wall and toilet
104
-
-
... More
Providing and laying Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation for embankment between filter media as directed by the Engineer -in-Charge.
93
-
-
... More
Providing and filling filter media behind the Abutments, Retaining/ Wing /Return Walls with suitable Granular Materials/ Stones/ Crushed Aggregates (40% 6mm, 30% 12mm and 30% 20mm) satisfying the requirments laid down In Clause 2500.4.2.2 of MORTH Specifications, to a thickness not less than 300 mm with smaller size towards the soil and bigger size towards the wall and compacted in layers up to the required height as per drawing including cost of all materials, labour charges, all lead and lift etc. complete as directed by the Engineer-In-Charge.
24
-
-
... More
Providing and fixing Perforated PVC pipes of 150 mm dia, 10 Kg/cm2 including joining with one step PVC solvent cement, in required line and levels, testing of joints, cost of all materials, labour charges etc complete, in filter media as per directions of the Engineer in Charge.
25
-
-
... More
Finishing Works
-
-
-
... More
12 mm cement plastering with cement mortar 1:4 (1 cement: 4 coarse sand) floated hard and trowelled smooth including cost of all materials, labour charges, curing etc complete
1112
-
-
... More
12 mm cement plastering with cement mortar 1:3 (1 cement: 3 coarse sand) floated hard and trowelled smooth including cost of all materials, labour charges, curing etc complete
16
-
-
... More
Ceiling plastering with 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) floated hard and trowelled smooth including cost of all materials, labour charges, curing etc. complete
259
-
-
... More
Providing and fixing false ceiling at all heights with 18 mm thick Cement board false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2% to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specifications, drawing and as per the directions of the Engineer-in-charge.
2
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on interior wall surface : with premium quality water thinnable cement primer after cleaning all plastered surface including all cost and conveyance of materials, labour charges, hire charges of tools, scaffolding with all incidental charges etc. completed by as directed by the Engineer-in-charge
954
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the existing water thinnable cement primer surface of wall and ceiling including all cost and conveyance of materials, labour charges, hire charges of tools, scaffolding with all incidental charges etc. complete as directed by the Engineer-in-charge.
510
-
-
... More
Wall painting with acrylic emulsion paint of required shade with approved brand and manufacture to give an even shade: two or more coats on new work on existing water thinnable cement primer/ white cement based putty finished wall surfaces including all cost and conveyance of materials, labour charges, hire charges of tools, scaffolding with all incidental charges etc. completed by as directed by the Engineer in charge. :- For interior walls
949
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm. including all cost and conveyance of materials, labour charges, hire charges of tools, scaffolding with all incidental charges etc. complete as directed by the Engineer in charge.:- For Exterior walls
541
-
-
... More
Lettering with black Japan paint of approved brand and manufacture as per the directions of the Engineer-in- charge.
250
-
-
... More
Flooring Works
-
-
-
... More
Flooring with Kota stone slab 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) in line and level as directed by the Engineer-in- charge.
112
-
-
... More
Providing and laying polished vitrified floor tiles of premium quality of approved colour and shade of size not less than 600 x 600 mm (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 course sand) including grouting the joints with joint filler of matching pigments etc complete in line and level as directed by the Engineer-in- charges.
142
-
-
... More
Providing and laying matt finish premium quality non slippery ceramic floor tiles of size not less than 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white, lvory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete in line and level as directed by the Engineer-in- charges.
33
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc. complete in line and level as directed by the Engineer-in- charges.
118
-
-
... More
Extra for providing of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc. including moulding rubbing and polishing of cut edges etc. complete as directed by the Engineer-in- charges.
6
-
-
... More
Providing and laying gang saw cut 18 mm thick, mirror polished and pre polished machine cut granites stone of required size and shape of approved shade , colour and texture for flooring laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of the Engineer-in charge. :- For kitchen and pantry counter
11
-
-
... More
providing edge moulding to 18 mm thick (granite work) marble stone counters , vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by te Engineer in charge
22
-
-
... More
Providing and laying factory made chamfered edge 60 mm thick Cement Concrete paver block of M-35 grade, in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications and direction of the Engineer in-charge.
18
-
-
... More
Doors and Windows
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood as per the drawing and directions of the Engineer -in-charge.
0.65
-
-
... More
Providing and fixing Second class Anjily wood/jack wood panelled shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per the drawing and directions of the Engineer in- charge.
20
-
-
... More
Providing and fixing panelling shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled shutters 25 mm to 40 mm thick using good quality Anjili / Jack wood all complete as per the drawing and directions of the Engineer in- charge.
15
-
-
... More
Providing and fixing 125 mm chromium plated door handles with necessary screws etc. complete as directed by the Engineer-in- charge.
20
-
-
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture as directed by the Engineer-in- charge.
58
-
-
... More
Supplying and fixing 200 mm long, 16mm dia stainless steel aldrop with necessary screws etc. complete as directed by the Engineer-in- charge.
9
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight up to 35kg and door width up to 700mm) with necessary accessories and screws etc. complete as directed by the Engineer-in- charge.
10
-
-
... More
Providing and fixing aluminium tower bolts 150 x 10 mm. ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by the Engineer-in- charge.
18
-
-
... More
Providing and fixing aluminium tower bolts 100 x 10 mm. ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by the Engineer-in- charge.
20
-
-
... More
Providing and fixing 150 mm bright finished floor brass door stopper to suit shutter thickness with rubber cushion, necessary brass screws etc. complete as directed by the Engineer-in- charge.
18
-
-
... More
Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block of size 30 x 10 x 15 cm, with C C 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc. complete as directed by the Engineer-in- charge.
72
-
-
... More
Supply premium quality 65mm, 7 lever brass pad lock with 3 keys with all incidental charges.
1
-
-
... More
Providing and fixing 24mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2mm (+ or-0.2mm ) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220mm having wall thickness 1mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20mm and 1mm (+ or - 0.1mm ) wall thickness. The lock rail made up of ' H' section , a UPVC hollow section of size 100 x 24 mm and 2mm (+ or - 0.2mm ) wall thickness, fixed to the shutter style by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi- chambered single panel of size not less than 620mm , having over all thickness of 20mm and 1mm (+ or - 0.1mm ) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and he directions of the Engineer - in charge. ( For toilet and bath room doors shutters ).
10
-
-
... More
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) works for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :
332
-
-
... More
Providing and fixing Powder coated aluminium works for shutters of doors, windows & ventilators with Powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required all complete as per architectural drawings and the directions of the Engineer-in-charge. (Fittings shall be paid for separately).
268
-
-
... More
Providing and fixing glazing with float glass panes of 5.50 mm thickness in aluminium door/window/ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of the Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
30
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board, with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminium doors/windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of the Engineer-in-charge.
3
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete as per architectural drawings and directions of the Engineer-in-charge.
592
-
-
... More
Finishing with deluxe multi surface paint on steel work to give an even shade, two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture etc. complete as per the directions of the Engineer-in-charge.
31
-
-
... More
Filling the gap up to 5mm depth and 5 mm width in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawings and directions of the Engineer-in-charge.
84
-
-
... More
Providing and fixing anodised (AC 15) aluminium tubular handle bar 32mm outer dia,3.0 mm thick and 2100 mm long with SS screws etc. complete as per the directions of the Engineer-in- charge.
2
-
-
... More
Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as per the directions of the Engineer-in- charge.
2
-
-
... More
Water Supply and Sanitary Works
-
-
-
... More
Providing and fixing PVC pipes of 110 mm dia, 6Kgf/cm2 including jointing of pipes with one step PVC solvent cement, trenching, refilling and testing of joints etc. complete as per the directions of the Engineer-in-charge.
66
-
-
... More
Providing and fixing PVC pipes 110 mm dia, 6Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of the Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc.
18
-
-
... More
Providing and fixing PVC pipes 20 mm dia, 10Kgf/cm2 including jointing of pipes with one step PVC solvent cement, trenching, refilling and testing of joints etc. complete as per the direction of the Engineer-in-charge.
42
-
-
... More
Providing and fixing exposed PVC pipe in internal plumbing with 20 mm dia, 12Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per the direction of the Engineer-in-charge
36
-
-
... More
Providing and fixing PVC pipes 20 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge. :- Concealed work, including cutting chases and making good the wall etc.
36
-
-
... More
Providing and fixing exposed PVC pipe in internal plumbing with 25mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge.
50
-
-
... More
Providing and fixing PVC pipes 25 mm dia, 12kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge.:- Concealed work, including cutting chases and making good the wall etc.
70
-
-
... More
Providing and fixing PVC pipes 32 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge.:- Concealed work, including cutting chases and making good the wall etc.
50
-
-
... More
Providing and fixing external plumbing with exposed PVC pipes 32 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge
50
-
-
... More
Providing and fixing internal plumping with exposed PVC pipes, 40 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge
50
-
-
... More
Providing and fixing PVC pipes 40 mm dia, 10Kgf/cm2, including jointing of pipes with one step PVC solvent cement, trenching, refilling and testing of joints etc. complete as per the direction of the Engineer-in-charge.
80
-
-
... More
Providing and fixing internal plumbing exposed on wall with PVC pipes 50 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge.
36
-
-
... More
Providing and fixing PVC pipes 50 mm dia, 10Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints etc. complete as per the direction of the Engineer-in-charge.:- Concealed work, including cutting chases and making good the wall etc.
36
-
-
... More
Providing and fixing PVC moulded 110 mm dia, Elbow fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
8
-
-
... More
Providing and fixing PVC 110 mm dia, Door Elbow moulded fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
8
-
-
... More
Providing and fixing PVC 110 mm dia, Bend moulded fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
6
-
-
... More
Providing and fixing PVC moulded 110 x 110 x 110 mm dia, Tee fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
6
-
-
... More
Providing and fixing PVC moulded 110 x 110 x 110 mm dia, Door Tee fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
4
-
-
... More
Providing and fixing White Vitreous China pedestal type water closet (European type) with plastic seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets /M.S anchoring bolts and nuts, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc. complete as per the direction of the Engineer-in-charge.
4
-
-
... More
Providing and White Vitreous China Wash basin size 630x450 mm, with C.I. brackets, with single 15mm CP brass pillar taps with elbow operated levers, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc. complete as per the direction of the Engineer-in-charge.
6
-
-
... More
Providing and fixing Stainless Steel Kitchen sink 510x1040 mm bowl depth 250 mm. with drain board , 304 (18/8) as per IS: 13983 with C.I. brackets /M.S anchoring bolts and nuts and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc. complete as per the direction of the Engineer-in-charge.
3
-
-
... More
Providing and fixing Chrome Silver platted brass Single lever swinging type Kitchen spout / Bib cock including all incidental charges.
3
-
-
... More
Providing and fixing Stainless Steel wall mounted hand wash trough of minimum size of 2100 mm x 500 mm x 330 mm made out of SS sheet of grade A ISI 304 (18/8) with a minimum thickness of 1.5 mm, with 4 Nos C.I brackets /M.S anchoring bolts and nuts , 4 Nos deck mounted 15 mm C.P brass pillar taps, 40 mm C.P brass waste of standard pattern with all accessories including making good the walls wherever required , including cost , conveyance labour charges with all incidental charges etc.. complete as directed by the Engineer in charge.
1
-
-
... More
Providing and fixing White Vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc. complete as per the direction of the Engineer-in-charge.
2
-
-
... More
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
6
-
-
... More
Providing and fixing PTMT bib cock 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour.
8
-
-
... More
Providing and fixing Bottle trap for wash basin and sink, 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
10
-
-
... More
Providing and fixing 15mm dia, 45cm long Unplasticised P.V.C connection pipe with brass union.
20
-
-
... More
Supplying, conveying to position, cleaning and installing SS floor Trap (male and female piece) of 150 mm size, approved make as directed by the Engineer-in-charge
10
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved quality conforming to IS:8931, approved make as directed by the Engineer-in-charge
6
-
-
... More
Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of the Engineer-in-charge.
2
-
-
... More
Supplying and fixing CP Health Faucet good quality including cost of materials and labour charges etc complete, approved make as directed by the Engineer-in-charge
4
-
-
... More
Providing and fixing 63 mm dia Vent cowl, PVC moulded fittings / accessories for rigid PVC pipes, including jointing with PVC solvent cement.
2
-
-
... More
Providing and fixing PVC ball valve 25 mm nominal bore of approved premium quality as directed by the Engineer- in charge.
4
-
-
... More
Providing and fixing PVC ball valve 20 mm nominal bore of approved premium quality as directed by the Engineer- in charge.
6
-
-
... More
Providing and fixing PVC ball valve 32 mm nominal bore of approved premium quality as directed by the Engineer- in charge.
4
-
-
... More
Providing and fixing PVC ball valve 40 mm nominal bore of approved premium quality as directed by the Engineer- in charge.
4
-
-
... More
Providing and fixing PVC ball valve 50 mm nominal bore of approved premium quality as directed by the Engineer- in charge.
1
-
-
... More
Supplying and filling the base of septic tank trench in line and level with minimum thickness of 10 cm over existing CC bed for cushioning using 6 mm broken stone including cost, conveyance, labour charges with all incidental charges etc.. complete as directed by the Engineer-in-charge.
0.5
-
-
... More
Supplying and installing ready made PVC Septic tank ( 35 flush capacity ) including earth work excavation for trenching, placing at the level below ground level as specified to the line and level (Provision for CC/06mm aggregate for the preparation of bed shall be paid separately) including cost, conveyance, labour charges with all incidental charges etc.. complete as directed by the Engineer-in-charge.
1
-
-
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5
2
-
-
... More
Electrical Works Ground Floor
-
-
-
... More
Wiring for light/fan/exhaust fan/call bell point with 1.5 mm2 FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured seperately).
33
-
-
... More
Wiring for twin control light point with 1.5 mm2 FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured seperately).
2
-
-
... More
Wiring for circuit /sub main wiring along with 2x1.5 mm2 + 1x1.5 mm2 earth wire of FRLS PVC Insulated copper conductor, single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured separately).
368
-
-
... More
Wiring for circuit /sub main wiring along with 2x2.5 mm2 + 1x2.5 mm2 earth wire of FRLS PVC Insulated copper conductor , single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured separately).
330
-
-
... More
Wiring for circuit /sub main/power plug wiring along with 2X4 mm2 + 1X4 mm2 earth wire of FRLS PVC Insulated copper conductor, single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured separately).
373
-
-
... More
Wiring for DB, meter panels, fuse units with 2X6 sqmm + 1X6 sqmm earth wire ISI marked , FRLS PVC insulated, single core copper conductor cable in surface/recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge. (PVC conduit will be measured seperately).
10
-
-
... More
Supplying and fixing of 20 mm medium class PVC conduit along with all fittings and accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
186
-
-
... More
Supplying and fixing of 25 mm medium class PVC conduit along with accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
250
-
-
... More
Supplying and fixing of 32 mm medium class Pvc conduit along with accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
5
-
-
... More
Supplying and fixing the 5/6 A modular switch on the existing modular plate and switch box including connections but excluding modular plate as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
32
-
-
... More
Supplying and fixing the modular 2 way 5/6A switch on the existing modular plate and switch box including connections but excluding modular plate as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and fixing the modular blank plate on the existing modular plate & switch box excluding modular plate as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
6
-
-
... More
Supplying and fixing 1 or 2 module (75mmx75 mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
6
-
-
... More
Supplying and fixing 4 module ( 125mmx75mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 6 module ( 200mmx75mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 8 module (125 X 125), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
4
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6A modular switch, connections etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
12
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A and 15/16A modular socket outlet and 15/16A modular switch, connections etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
3
-
-
... More
Supplying and fixing metal box of 75 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
22
-
-
... More
Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/wodden block including connections etc.as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
22
-
-
... More
Supply and fixing of brass batten /angle holder and 12 W LED bulb with all necessary fittings and clamp, including connections etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supply of 18/20W, 1200 mm long batten straight linear LED Tube Light fitting, with all necessary fittings and clamp etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
13
-
-
... More
Supply of surface mounted square 8 W LED down light with Aluminium die-cast body, finished with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, all necessary fittings and clamps etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge. as directed by the Engineer in Charge.
3
-
-
... More
Supply of 5 W, LED bathroom mirror light with all necessary fittings and clamp etc., as required complete as directed by the Engineer in Charge.
5
-
-
... More
Installation testing and commissioning of wall bracket /ceiling fittings of all size and shapes containing up to Two GLS/CFL/LED Lamps per fitting , complete with all accessories including connections etc. as required complete as directed by the Engineer in Charge.
26
-
-
... More
Supply and fixing suitable size G.I. box with modular plate and cover in front of surface or recess, including providing and fixing 25A modular socket outlet and 25A modular SP,MCB "c" Curve including connections, painting etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supply and fixing 30A 415V ,TPN industrial type socket outlet with 4pole and earth , metal enclosed top plug along with 30A " C'curveTP,MCB , in sheet steel enclosure, on surface or recess, with chained metal cover on for the socket outlet and complete with connections, testing, and commissioning etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge..
1
-
-
... More
Supplying of 1200mm sweep, 5 star rated ceiling fan with double ball bearing, Al pessure diecast body with Al blades, canopies hanging shackle, 30cm down road and without speed regulator suitable for 240V, 50 Hz AC supply confirms to IS 374/1979 as required, including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
7
-
-
... More
Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (up to 30 cm) 1.5 mm2 FRLS PVC insulated Cu conductor, single core cable etc., as required, including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
7
-
-
... More
Supplying and fixing 2 module electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate, as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
7
-
-
... More
supplying of 150 mm sweep light duty Exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories required as directed by the Engineer in Charge.
4
-
-
... More
Installation of Exhaust fan in the existing opening, including making good the damage, connections, testing and commissioning etc, required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
4
-
-
... More
Supplying and fixing of 4 way (4+12), double door surface /recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper busbar, common N link, earth bar, din bar for mounting MCB'S ( but without MCBs and incomer) as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
supplying and fixing of surface/recess mounting , vertical type, 415V, 4 way (4+12) double door VTPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper busbar, common N.Link, earth bar din bar, for mounting MCB's (but without MCB s and incomer) as required, including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 5A to 32A rating 240V/415V, 10 KA, "C" curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
21
-
-
... More
Supplying and fixing 5A to 32A rating 240V/415V, 10 KA, "C" curve miniature circuit breaker suitable for inductive load of triple pole and neutral in the existing MCB DB complete with connections, testing and commission ing etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge
1
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
5
-
-
... More
Supplying and fixing 63A four pole 415 V, isolator, in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and fixing 100 A four pole 415 V, isolator, in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 63 A, four pole (three phase and neutral), 415V residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB complete with connections, etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and providing Earthling with G.I .Earth pipe 4.5 meter long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc., with charcoal/coke and salt as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
4
-
-
... More
Supply and fixing of 3 phase meter panel with 63A with N link kitkat fuse unit and accessories in surface or recess complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Providing and fixing 8 SWG copper wire on surface or in recess for earthling connections as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
20
-
-
... More
Preparation of drawings/documents and getting necessary approval from KSEB Ltd (statutory fees will be reimbursed by the client)
1
-
-
... More
Electrical Works First Floor
-
-
-
... More
Wiring for light/fan/exhaust fan/call bell point with 1.5 mm2 FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured seperately).
57
-
-
... More
Wiring for twin control light point with 1.5 mm2 FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured seperately).
6
-
-
... More
Wiring for circuit /sub main wiring along with 2x1.5 mm2 + 1x1.5 mm2 earth wire of FRLS PVC Insulated copper conductor, single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured separately).
720
-
-
... More
Wiring for circuit /sub main wiring along with 2x2.5 mm2 + 1x2.5 mm2 earth wire of FRLS PVC Insulated copper conductor , single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (conduit will be measured separately).
610
-
-
... More
Wiring for circuit /sub main/power plug wiring along with 2X4 mm2 + 1X4 mm2 earth wire of FRLS PVC Insulated copper conductor, single core cable in surface /recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge (PVC conduit will be measured separately).
410
-
-
... More
Wiring for DB, meter panels, fuse units with 2X6 sqmm + 1X6 sqmm earth wire, ISI marked , FRLS PVC insulated, single core copper conductor cable in surface/recessed medium class PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supplying and drawing 2 pair 0.5 mm dia FRLS PVC Insulated annlead copper conductor, un armoured telephone cable in the existing surface/recessed steel/PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
240
-
-
... More
Supplying and fixing of 20 mm medium class PVC conduit along with all fittings and accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
280
-
-
... More
Supplying and fixing of 25 mm medium class PVC conduit along with accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
165
-
-
... More
Supplying and fixing of 32 mm medium class Pvc conduit along with accessories (PVC bends, couplers, junction boxes, staples, saddles, screws, PVC fastener, cement, paint, sand etc.) in surfaces/recess including cutting the wall and make good the same in case of recessed conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supplying and fixing the 5/6 A modular switch on the existing modular plate and switch box including connections but excluding modular plate, as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
47
-
-
... More
Supplying and fixing the 2 way 5/6A modular switch on the existing modular plate and switch box including connections but excluding modular plate, as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
6
-
-
... More
Supplying and fixing the modular Bell push on the existing modular plate and switch box including connections but excluding modular plate, as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing the modular blank plate on the existing modular plate & switch box excluding modular plate, as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supplying and fixing 1 or 2 module (75mmx75 mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
11
-
-
... More
Supplying and fixing 4 module ( 125mmx75mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supplying and fixing 6 module (200mmx75mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
3
-
-
... More
Supplying and fixing 8 module ( 125mmx125mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 12 module (200 mmx150mm), G.I. box along with modular base & cover plate for modular switches in recess etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6A modular switch, connections etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
31
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A and 15/16A modular socket outlet and 15/16A modular switch, connections etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front of surface or recess, including providing and fixing 25A modular socket outlet and 25A modular SP,MCB "c" Curve including connections, painting etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
7
-
-
... More
Supplying and fixing metal box of 75 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge. .
25
-
-
... More
Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/wodden block including connections etc.as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
25
-
-
... More
Supply and fixing call bell/buzzer suitable for single phase, 230V, with all necessary fittings and clamp etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supply of 18/20W, 1200 mm long batten straight linear LED Tube Light fitting, with all necessary fittings and clamp etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
18
-
-
... More
Supply of surface mounted square 8 W LED down light with Aluminium die-cast body, finished with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, all necessary fittings and clamps etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge. as directed by the Engineer in Charge.
14
-
-
... More
Supply of 5 W, LED bathroom mirror light with all necessary fittings and clamp etc as required complete as directed by the Engineer in Charge.
4
-
-
... More
Installation and testing commissioning of wall bracket /ceiling fittings of all size and shapes containing up to Two GLS/CFL/LED Lamps per fitting, complete with all accessories including connections etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
36
-
-
... More
Supplying of following size of 1200 mm sweep, 5 star rated ceiling fan, with double ball bearing , Aluminium pressure diecast body with Aluminium blades, canopies, hanging shackle , 30cm down rod and without speed regulator suitable for 240V, 50Hz, AC supply confirms to IS 374/1979 as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
15
-
-
... More
Installation, and testing commissioning of ceiling fan including wiring the down rods of standard length (up to 30 cm) 1.5 mm2 FRLS PVC insulated copper conductor, single core cable etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
15
-
-
... More
Supplying and fixing 2 module electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
15
-
-
... More
Supply of 150 mm sweep, light duty exhaust fan in plastic body with self opening louvers working on 230 V, AC supply complete with all accessories as required complete as directed by the Engineer in Charge.
3
-
-
... More
Installation of Exhaust fan in the existing opening, including making good the damage, connection, testing and commissioning etc, required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge. .,
3
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN 1 run cable in the existing surface/ recessed Steel/PVC Conduit as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
158
-
-
... More
Supplying and fixing of 4 Pole 100 A Change Over Switch with enclosure in the existing surface/ recess with wiring and interconnections etc as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supply and fixing 415V, 4 way (4+12) double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, on surface/recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthling etc as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing of 4 way (4+12), double door surface /recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper busbar, common N link, earth bar, din bar for mounting MCB'S ( but without MCBs and incomer) as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 5A to 32A rating, 240V/415V ,10 KA, "C" curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
38
-
-
... More
Supplying and fixing 5A to 32A ratings 240V/415V, 10KA, "C" curve miniature circuit breaker suitable for inductive load of triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc., as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
4
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB,DB complete as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
10
-
-
... More
Supply and fixing 40 A, four pole, 415 V, isolator, in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supply and fixing 63 A, four pole, 415 V, isolator, in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supply and fixing 100 A, four pole, 415V, 100 A isolator, in the existing MCB DB complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and fixing 63 A, four pole (three phase and neutral), 415V, residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB complete with connections, etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
2
-
-
... More
Supplying and providing Earthling with G.I. Earth pipe 4.5 meter long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
6
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing of RJ 45 (data socket) as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
8
-
-
... More
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing of RJ 11 (Telephone socket) as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
8
-
-
... More
Supplying, fixing and installation of Krone type distribution box Box (TEL) 10 way including interconnections as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying, fixing and Installation of 10 port 10/100Mbps router including Supplying of all fixing materials, accessories and interconnections complete as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying, fixing and installation of factory fabricated wall mounted, powder coated metal rack of suitable size for accommodating 10 port router and 10 way Krone type distribution box as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing of 3 phase meter panel with 63 A with N link, kitkat fuse unit(set) and accessories in surface or recess complete with connections, testing and commissioning etc. as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
1
-
-
... More
Supplying and fixing 8 SWG copper wire on surface or in recess for earthling connections as required including the cost of all materials, labour charges etc complete as directed by the Engineer in Charge.
20
-
-
... More
Preparation of drawings/documents and getting necessary approval from KSEB Ltd (statutory fees will be reimbursed by the client)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements