Back
  1. Home/
  2. Indian Tenders/
  3. Kerala Tenders/
  4. Roads And Bridges Development Corporation Of Kerala Limited/
  5. Overview

Roads And Bridges Development Corporation Of Kerala Limited Tender

Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.

Roads And Bridges Development Corporation Of Kerala Limited - RBDCK Tender

Works
Petroleum Products
Eprocure
Ernakulam, Kerala
Opening Date12 Feb 2021
Closing Date3 Apr 2021
Tender AmountRefer Documents 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
od119453/2020_2021 : Supply of Nitrogen Injection Fire Prevention and Extinguision system for 110/11kV, 8/6.3MVA transformer protection against fire hazzards including fire extinguishing cubicle complete with nitrogen gas cylinder hose piping system, heat sensor for fire detector, automatic valve, control system, class C pipes with supports and fittings and all the necessary accessories as required complete.(Refer Technical specification)

2

-

-

... More
od119469/2020_2021 : Installation, Testing and commissioning of Nitrogen Injection Fire Prevention and Extinguision system for 110/11kV, 8/6.3MVA transformer protection against fire hazzards including fire extinguishing cubicle complete with nitrogen gas cylinder hose piping system, heat sensor for fire detector, automatic valve, control system, class C pipes with supports and fittings and all the necessary accessories as required complete.(Refer Technical specification)

2

-

-

... More
od119471/2020_2021 : Motorized Double Break Isolator without Earth Switch Supply of Outdoor type ,SCADA controlled motorized gang operated 3 pole centre rotating solid core porcelain based Isolator with horizontal disconnecting double break, 110 kV, 1250 A without earth switch having minimum creepage distance of 25mm/ kV minimum,40 kA 1 sec rated short circuit current and with all accessories , necessary clamps and connectors suitable for connecting to Al tubular bus bar, earthing from equipment to earth-mat and conforming to IS : 9921 IEC 62271. The foundation and support structure will be measured separately (Refer detailed technical specification)

1

-

-

... More
od119487/2020_2021 : Installation, Testing and Commissioning of Outdoor type ,SCADA controlled motorized gang operated 3 pole centre rotating solid core porcelain based Isolator with horizontal disconnecting double break, 110 kV, 1250 A without earth switch having minimum creepage distance of 25mm/ kV minimum,40 kA 1 sec rated short circuit current and with all accessories , necessary clamps and connectors suitable for connecting to Al tubular bus bar, earthing from equipment to earth mat and conforming to IS : 9921 IEC 62271. The foundation and support structure will be measured separately (Refer detailed technical specification)

1

-

-

... More
od119488/2020_2021 : Motorized Double break Isolator with Earth Switch Supply of Outdoor type, SCADA controlled motorized gang operated 3 pole centre rotating solid core porcelain based Isolator with horizontal disconnecting double break, 110 kV, 1250 A with earth switch having minimum creepage distance of 25mm/ KV minimum,40 kA / 1 sec rated short circuit current and with all accessories , necessary clamps and connectors suitable for connecting to Al tubular bus bar, earthing from equipment to earth mat and conforming to IS : 9921 IEC 62271.The foundation and supporting structure will be measured separately. (Refer detailed technical specification)

1

-

-

... More
od119490/2020_2021 : Installation, Testing and Commissioning of Outdoor type, SCADA controlled motorized gang operated 3 pole centre rotating solid core porcelain based Isolator with horizontal disconnecting double break, 110 kV, 1250 A with earth switch having minimum creepage distance of 25mm/ KV minimum,40 kA / 1 sec rated short circuit current and with all accessories , necessary clamps and connectors suitable for connecting to Al tubular bus bar, earthing from equipment to earth mat and conforming to IS : 9921 IEC 62271.The foundation and supporting structure will be measured separately. (Refer detailed technical specification)

1

-

-

... More
od119546/2020_2021 : Current Transformer Supply of Outdoor type live tank design 110 kV, 50/1 A single core CT, 15 VA , class 0.2S accuracy on polymeric insulator with all accessories conforming to IEC 60044-1, IS 2705 with creepage distance of 25mm/ KV minimum with Polymer insulating housing on a suitable existing foundation, earthing from equipment to earth mat, suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar complete. The CT should be calibrated from NABL. (Refer detailed technical specification). The foundation and supporting structure will be measured separately.

3

-

-

... More
od119548/2020_2021 : Installation, Testing and commissioning of Outdoor type live tank design 110 kV, 50/1 A single core CT, 15 VA , class 0.2S accuracy on polymeric insulator with all accessories conforming to IEC 60044-1, IS 2705 with creepage distance of 25mm/ KV minimum with Polymer insulating housing on a suitable existing foundation, earthing from equipment to earth mat, suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar complete. The CT should be calibrated from NABL. (Refer detailed technical specification). The foundation and supporting structure will be measured separately.

3

-

-

... More
od119554/2020_2021 : Voltage Transformer Supply of Outdoor type of110 kV/√3/110/√3 V with one secondary Inductive Voltage Transformer with 50 VA, CL 0.2 accuracy for tariff metering with all accessories conforming to IEC 60044-2, IS 3156-1992 with creepage distance of 25mm/ KV minimum on polymer insulator and with all accessories suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar conductor, earthing from equipment to earth mat as required complete on a suitable existing foundation. (Refer detailed technical specification).The foundation and supporting structure will be measured separately.

3

-

-

... More
od119564/2020_2021 : Installation, Testing and Commissioning of Outdoor type of110kV/√3/110/√3 V with one secondary Inductive Voltage Transformer with 50 VA, CL 0.2 accuracy for tariff metering with all accessories conforming to IEC 60044-2, IS 3156-1992 with creepage distance of 25mm/ kV minimum on polymer insulator and with all accessories suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar conductor, earthing from equipment to earth mat as required complete on a suitable existing foundation. (Refer detailed technical specification).The foundation and supporting structure will be measured separately.

3

-

-

... More
od119567/2020_2021 : Lightning Arrestor Supply of Outdoor Zinc oxide gapless type 50Hz, 96 kV, 10 kA lightning arrestor, of energy class III with surge counter and milli ammeter, with all accessories conforming to IS 3070 with creepage distance of 25mm/kV minimum polymeric insulator and with all accessories suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar/Kundha conductor(as per SLD), earthing from equipment to earth mat and compatible for SCADA system as required on suitable existing foundation (Refer detailed technical specification). The foundation and supporting structure will be measured separately.

6

-

-

... More
od119573/2020_2021 : Installation, Testing and Commissioning of Outdoor Zinc oxide gapless type 50Hz, 96 kV, 10 kA lightning arrestor, of energy class III with surge counter and milli ammeter, with all accessories conforming to IS 3070 with creepage distance of 25mm/KV minimum polymeric insulator and with all accessories suitable for connecting necessary clamps and connectors for connecting to Al tubular bus bar/Kundha conductor(as per SLD), earthing from equipment to earth mat and compatible for SCADA system as required on suitable existing foundation (Refer detailed technical specification). The foundation and supporting structure will be measured separately.

6

-

-

... More
od119627/2020_2021 : Control and Relay panel CRP - I (110kV Line side) Design and Supply of indoor type, free standing, Control Relay Panel for remote operation and protection of 110kV line side switchyard equipments in incoming 110kV line bay. The CRP relays shall be IEC 61850 compatible. Panel shall be of simplex type. The panels shall be completely enclosed to ensure dust, moisture and vermin proof atmosphere. The enclosure shall provide a degree of protection not less than (IP 54) in accordance with IS 2147.Panels shall be rigid, free standing and floor mounting type and comprise of structural frames enclosed completely with specially selected smooth finished, cold rolled sheet steel of thickness not less than 3 mm for weight bearing members of panel such as base frame, front sheet and for frames and not less than 2 mm for sides, door top and bottom portions.Mounting of IEDs, switches, Ind. Lamps Meters , TTBs, RTBs etc.On swing Frame 19” Rack.Front Door shall be Full Transparent (Perspex). CRPshall be provided with 3phase AC and 110V DC Power internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc complete as required as per drawing specification. complete with the following accessories. Metering equipments shall be modbus compatible with SCADA a) Numerical relay for line side Main Protection - Over voltage and under voltage protection, Reverse Power relay. b) Numerical Relay for Back Up Protection: Directional Over Current, Earth Fault Protection c) Digital Power Analyzer, Voltmeter, Ammeter, HZ meter, MW, MVAR d) Standard SLD and fault indication, reset, test buttons, reset provisions shall be available in BCU e) Bay Control Unit f) TNC switch for Breaker Operation g)Test terminal Blocks f)Trip circuit supervision relays, g)High speed Tripping relays h)DC supervision relays i)Relay Energy meter TTBs (Refer Technical specification Single line diagram). Cable feeder bay may be provided with one Aux. BCU for integrating signals from Battery charger, DC AC DB, Lighting system, SIgnals from Power Trf. etc.

1

-

-

... More
od119640/2020_2021 : Installation, testing and commissioning of CRP - I (110kV Line side) Panel with all necessary interconnections and specifications as per single line diagram and technical specification

1

-

-

... More
od125060/2020_2021 : CRP - II and III (110kV Transformer side) Design ans Supply of indoor type, free standing, Control Relay Panel for remote operation and protection of 11kV Transformer bay. The CRP relays shall be IEC 61850 compatible. Panel shall be of simplex type. The panels shall be completely enclosed to ensure dust, moisture and vermin proof atmosphere. The enclosure shall provide a degree of protection not less than (IP 54) in accordance with IS 2147.Panels shall be rigid, free standing and floor mounting type and comprise of structural frames enclosed completely with specially selected smooth finished, cold rolled sheet steel of thickness not less than 3 mm for weight bearing members of panel such as base frame, front sheet and for frames and not less than 2 mm for sides, door top and bottom portions.Mounting of IEDs, switches, Ind. Lamps Meters , TTBs, RTBs etc.On swing Frame 19” Rack.Front Door shall be Full Transparent (Perspex). CRPshall be provided with 3phase AC and 110V DC Power internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. complete as required as per drawing specification. complete with the following accessories. Metering equipments shall be modbus compatible for SCADA a) Numerical relay for line side Main Protection - Differential, REF Protection, over voltage and under voltage protection b) Numerical Relay for Back Up Protection: Directional Over Current and Earth Fault Protection and over flux protection c) Relay for transformer protection: Buchholz relay, winding temperature and oil temperature relay d) Fault indication, reset, test buttons, reset provisions shall be available in BCU e) Bay Control Unit f) TNC switch for Breaker Operation g)Test terminal Blocks h)Trip circuit supervision relays, i)High speed Tripping relays j)DC supervision relays k)Relay Energy meter TTBs (Refer Technical specification Single line diagram).

2

-

-

... More
od125061/2020_2021 : Installation, testing and commissioning of CRP - II and III (110kV Transformer side) Panel with all necessary interconnections and specifications as per single line diagram and technical specification

2

-

-

... More
od125062/2020_2021 : Supply of Laptop with Relay Parameterization Software

1

-

-

... More
od125063/2020_2021 : Installation, Testing and commissioning of Laptop with Relay Parameterization Software

1

-

-

... More
od129057/2020_2021 : GIS EQUIPMENTS Design and Supply of 110kV GIS substation with all other accessories as required complete including the following components, compatible with IEC 61850 110kV Indoor type SF6 Gas Insulated Switchgear (GIS) Incoming Feeder Bay Module of GIS single busbar configuration with CB, CTs, VT, Disconnectors Earthing Switches , pressure guages, etc complete- 1 set 110kV Indoor type SF6 Gas Insulated Switchgear (GIS) Transformer Feeder Bay Module of GIS single busbar configuration with CB, CTs, VT, Disconnectors Earthing Switches , pressure guages,etc complete - 2 set 110kV Indoor type SF6 Gas Insulated Switchgear (GIS) Bus PT Module with Disconnector earthing switch - 1 set GIS Module Accessories, Auxiliary Materials like support structure,earthing material /connections, Integrated Local Control Cubicle,interconnecting cables etc. as required to make the GIS system complete. The quoted amount shall be inclusive of all spares as listed in the technical specification. Refer Technical specification for more details.

1

-

-

... More
od125073/2020_2021 : Installation, testing and commissioning of 110kV GIS substation with all other accessories as required complete

1

-

-

... More
od125077/2020_2021 : BAY MARSHALLING BOX Fabrication and supply of oudoor IP 54 rated Bay Marshalling Kiosk with space heater, 75 bolted connectors, necessary suitable cables and wires and all as per direction

1

-

-

... More
od125131/2020_2021 : Installation, testing and commissioning with all necessary accessories as required complete

1

-

-

... More
od125142/2020_2021 : ABT Meter: Main and Check Meter Supply, Installation, Testing and commissioning of one number of digital type ABT Main meter one numbre of Check meter (Accuracy Class 0.2S for each) for 110kV side including weatherproof kiosk made of 14SWG CRCA sheet powder coated suitable for outdoor installation (IP65). The meter shall be modbus compatible suitable for SCADA.The item includes connectors, test terminal block, indication lamp etc. complete as per KSEB standard. (Refer detailed technical specification).

1

-

-

... More
od125152/2020_2021 : Transformer Rail track Supply of Transformer rail track with all necessary accessories. (size 60 lbs/yard i.e. about 29.76 kg/m).

20

-

-

... More
od125155/2020_2021 : Installation of Transformer Rail track

20

-

-

... More
od125157/2020_2021 : GI Lattice structure for Columns/Towers Design, supply and installation of hot dipped GI sections of latticed box type column, gantry, equipment support, plates, pipes, etc of bolted/welded construction manufactured out of ISMC/ISA / plates etc as per design drawings including GI assembly bolts, nuts, washers, etc. complete. (For details refer Detailed Technical Specification)

12000

-

-

... More
od125162/2020_2021 : 73.03mm(O/D) IPS Aluminum tube Supply of IPS Aluminium tube of size 73.03 mm as Outer Diameter made of rigid aluminum alloy round tube bus bar Schedule 40 with Internal dia of 62.71 mm complete as per specification (For details refer Detailed Technical Specification)

90

-

-

... More
od125166/2020_2021 : Installation, testing and commissioning of 73.03mm(O/D) IPS Aluminum tube

90

-

-

... More
od125184/2020_2021 : Aluminium connectors Accessories Supply Installation, testing and commissioning of all hardware its accessories for the erection of 73.03mm(O/D) Al tube busbar. The item includes Aluminium joints, sleeve for Al tube, connectors, all clamps those connected to Isolator, LA, CT, PT, corona bell for Al tube and all other clamps necessary for the connection in the yard etc.

1

-

-

... More
od125188/2020_2021 : 11kV VCB Panel Supply of 11 kV,1250A 25kA( for 3seconds), Electrically operated draw out type VCB with fully encapsulated vacuum interrupter panel with busbar extendable on both side ,fabricated out of 14 gauge CRCA/ Alu Zinc sheet .The panel shall be arc flash tested with 1250A aluminum busbar support insulators, space heater with thermostat, cubicle illumination lamp, MCBs for AC/DC Control, 110V DC motor operated spring charged mechanism, anti-pumping device, 110V DC shunt trip and closing coil, necessary control wiring etc having following specific components and as per IS / IEC standards. Incomer - 2 Nos i)11kV VCB, 1250 A, 25kA, 3 sec. for receiving 11kV supply from the 8/6.3 MVA, 110/11kV Transformer - 1 No ii) 11kV/√3 /110V/√3, 50VA, Cl 0.5 PT - 3 No.iii) Core 1 - 500/5A Cl 0.5 15VA resin cast CT for Metering - 3Nos, iv) Core II - 500/5A Cl 5P10 15VA resin cast CT for Protection - 3 Nos, iv) Core III - 500/1A Cl PS 15VA resin cast CT for Protection - 3 Nos v) RYB ON/OFF LED indication lamps, vi) 4A, C curve control MCB 11kV PT HRC Fuse vii) Numerical relay for protection with IEC 61850 compatibility. viii) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), viiii) Analog meters Bus coupler - 1 No. i)1250A, 25 kA (3 sec), VCB, Electrically operated draw out type, ii) RYB LED indication lamps, iii)TNC breaker control switch etc. for bus coupler Bus PT- 2 No. (1 no Each on either sides) I) Draw out type bus PT with PT HRC fuse in separate chamber or shall be of plug in/ withdrawal type-3No, ii) One number Earthing Truck for cable side-1no Outgoing - 7 nos i)11kV VCB, 1250 A, 25kA, 3 sec as outgoing - 1 No, ii) Core I - 300/5A Cl 0.5 15VA resin cast CT for Metering - 3 Nos, iii) Core II - 300/5A Cl 5P10 15VA resin cast CT for Feeder Protection - 3 Nos iv) RYB ON/OFF LED indication lamps. v) Numerical relay for protection with IEC 61850 compatibility. vi) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), vii) Analog meters Outgoing (For Auxiliary Transformer)-1 Nos i)11kV VCB, 1250 A, 25kA, 3 sec as outgoing - 1 No. ii) Core I - 20/5A Cl 0.5 15VA resin cast CT for Metering - 3 Nos, iii) Core II - 20/5A Cl 5P10 15VA resin cast CT for Protection - 3 Nos, iv) RYB ON/OFF LED indication lamps. v) Numerical relay for protection with IEC 61850 compatibility. vi) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), vii) Analog meters. Vacuum circuit breaker panels shall conform to IEC 62271. The control voltage should be 110V DC for trip, closing and compatible for SCADA system complete. Each VCB panel should have panel lighting (LED light fixture) and panel heater with temperature control thermostat. (Refer Technical specification)

1

-

-

... More
od125224/2020_2021 : Installation, testing and Commissioning of 11 kV,1250A 25kA( for 3seconds), Electrically operated draw out type VCB with fully encapsulated vacuum interrupter panel with busbar extendable on both side ,fabricated out of 14 gauge CRCA / Alu Zinc sheet with all necessary control wiring etc having following specific components and as per IS / IEC standards. Incomer - 2 Nos i)11kV VCB, 1250 A, 25kA, 3 sec. for receiving 11kV supply from the 8/6.3 MVA, 110/11kV Transformer - 1 No ii) 11kV/√3/110V/√3, 50VA, Cl 0.5 PT - 3 No. iii) Core 1 - 500/5A Cl 0.5 15VA resin cast CT for Metering - 3Nos, iv) Core II - 500/5A Cl 5P10 15VA resin cast CT for Protection - 3 Nos, iv) Core III - 500/1A Cl PS 15VA resin cast CT for Protection - 3 Nos v) RYB ON/OFF LED indication lamps, vi) 4A, C curve control MCB 11kV PT HRC Fuse vii) Numerical relay for protection with IEC 61850 compatibility. viii) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), viiii) Analog meters Bus coupler - 1 No. i)1250A, 25 kA (3 sec), VCB, Electrically operated draw out type, ii) RYB LED indication lamps, iii)TNC breaker control switch etc. for bus coupler Bus PT- 2 No. (1 no Each on either sides) I) Draw out type bus PT with PT HRC fuse in separate chamber or shall be of plug in/ withdrawal type-3No, ii) One number Earthing Truck for cable side-1no Outgoing - 7 nos i)11kV VCB, 1250 A, 25kA, 3 sec as outgoing - 1 No, ii) Core I - 300/5A Cl 0.5 15VA resin cast CT for Metering - 3 Nos, iii) Core II - 300/5A Cl 5P10 15VA resin cast CT for Feeder Protection - 3 Nos iv) RYB ON/OFF LED indication lamps. v) Numerical relay for protection with IEC 61850 compatibility. vi) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), vii) Analog meters Outgoing (For Auxiliary Transformer)-1 Nos i)11kV VCB, 1250 A, 25kA, 3 sec as outgoing - 1 No. ii) Core I - 20/5A Cl 0.5 15VA resin cast CT for Metering - 3 Nos, iii) Core II - 20/5A Cl 5P10 15VA resin cast CT for Protection - 3 Nos, iv) RYB ON/OFF LED indication lamps. v) Numerical relay for protection with IEC 61850 compatibility. vi) Digital Power Analyzer with communication and TOD facility (Schneider Electric PM5310 make or equivalent), vii) Analog meters. Vacuum circuit breaker panels shall conform to IEC 62271.

1

-

-

... More
od125227/2020_2021 : Emergency Push Button Supply of Push button station with key lockable mushroom head type push button at OFF position mounted on suitable thermoplastic weather proof UV resistant box of IP 66 protection

2

-

-

... More
od125237/2020_2021 : Installation, testing and commissioning of Emergency Push Button to be erected on MS angle frame with necessary foundation painted or to be grouted to the wall for emergency tripping of transformer

2

-

-

... More
od125281/2020_2021 : Station Battery Charger Supply of Indoor, floor mounted, IP42, with 60 Amps rated with float and boost type battery charger 110V DC output power supply battery charger (SCADA Compatible) with DC switch / MCB DB, digital meters to monitor Voltage and current with RS 485 communication port (modbus compatible), indication lamps, protective relays, interconnections, earthing etc.T he rate quoted shall be inclusive of all the necessary internal control wiring and accessories as required complete.(Refer detailed technical specification)

1

-

-

... More
od125301/2020_2021 : Installation, testing commissioning Indoor, floor mounted, IP42, with 60 Amps rated with float and boost type battery charger 110V DC output power supply battery charger (SCADA Compatible) with DC switch / MCB DB, digital meters to monitor Voltage and current with RS 485 communication port(modbus compatible), indication lamps, protective relays, earthing etc with all necessary interconnections necessary as required complete.

1

-

-

... More
od125359/2020_2021 : VRLA Battery Supply of 110V Station Battery with 2Volt cells, 425AH stationary type SMF VRLA batteries (55nos, 2 Volt cell) on a non metallic stand capable of supplying continuous load of 60A, The feeder panel shall consists of 63 A MCB incomer and 4 nos of 32 A MCB outgoing which shall be in the same scope. DC AC(for 110kV system) DB shall be SCADA compatible(Refer detailed technical specification)

1

-

-

... More
od125367/2020_2021 : Installation, testing commissioning 110V Station Battery with 2Volt cells, 425AH stationary type SMF VRLA batteries (55nos, 2 Volt cell) on a non metallic stand capable of supplying continuous load of 60A with all necessary interconnections and accessories as required complete.

1

-

-

... More
od125394/2020_2021 : UPS Supply of 5 kVA, single phase input, single Phase output, true on-line UPS system with 30minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank . The UPS shall be Fully digital controlled based on DSP, Power factor corrected from end > 0.9, Pure sine wave output, Full time output voltage frequency regulation, Auto regulation of battery end voltage, Intelligent interface with LED/LCD display, Static bypass switch / manual by pass switch, Auto temperature compensation.

1

-

-

... More
od125399/2020_2021 : Installation, Testing and Commissioning of 5 kVA, single phase input, single Phase output, true on-line UPS system with 30minutes back up with all necessary interconnections required as complete.The installation testing and commissioning includes hoisting to the respective location, assembling of batteries, lining up, bolting the units, checking all the control wirings, pre commissioning checks, all the tests at site as per standards etc complete and as detailed in technical specification.

1

-

-

... More
od125426/2020_2021 : Design, Manufacture and Supply including packing and transportation to the site of 110 kV, 630 sqmm, single core, annealed plain stranded circular aluminium conductor, semi conducting tapes (separator over conductor) conductor screened by semi-conducting layer, XLPE insulated, insulation screening by extruded semi-conducting layer followed by water swellable semi conducting tape, corrugated aluminium sheath ( Corrugated aluminium sheath withstand fault current of 40 kA for 1 seconds), semiconducting Water Blocking Tape , non conducting water blocking tape and overall HDPE Type outer sheath, with overall extruded semiconducting layer confirming to IS 7098(part III) and IEC-60840 for testing. The cable shall be laid in trefoil formation(three cable in trefoil) including bonding of cable and tieing by using polyproplene rope, trefoil clamps in existing cable trench/hume pipe with filling of fine river sand etc as per drawing. The item shall be complete with all accessories and fully meeting as per technical specification and drawings

272

-

-

... More
od125539/2020_2021 : Laying, testing and commissioning of 110 kV, 630 sqmm, single core, annealed plain stranded circular aluminium conductor cable. The cable shall be laid in trefoil formation(three cable in trefoil) including bonding of cable and tieing by using polyproplene rope, trefoil clamps in existing cable trench/hume pipe with filling of fine river sand etc as per drawing.

272

-

-

... More
od125542/2020_2021 : Supply, installation, testing commissioning of 110kV pothead for terminating 1C 630sqmm Aluminium cable in 110/11kV Transformer with oil-oil bushing.

6

-

-

... More
od125548/2020_2021 : Supply, installation, testing commissioning of Plug in Type cable termination kit suitable for 110kV 1Cx 630 Sqmm XLPE Aluminium UG cable for connecting to GIS Cable feeder and Transformer bays, including suitable link boxes, bonding cable earthing.

9

-

-

... More
od125566/2020_2021 : Supply of Premoulded type porcelain outdoor cable end termination suitable for 110kV , 630 sqmm, single core XLPE insulated corrugated Aluminium sheathed cable including all necessary clamps, fasterners, 110kV cable sheath earthing using link box and other accessories for connecting the EHT cable to 75mm dia aluminium bus bar. The item shall be complete with all accessories and fully meeting as per technical specification and drawings.

3

-

-

... More
od125558/2020_2021 : Installation, testing commissioning of Premoulded type porcelain outdoor cable end termination suitable for 110kV , 630 sqmm, single core XLPE insulated corrugated Aluminium sheathed cable. The EHT cable shall be properly supported to the lattice structure. Foundation and supporting structure will be measured separately

3

-

-

... More
od125567/2020_2021 : 160kVA Station Transformer Supply of dry type outdoor 11/0.433kV, 160kVA, 3 phase, Dyn11, 50 Hz, lasersciber core, copper wound Station auxiliary transformer with off load taps of +5% to -7.5% insteps of 2.5% conforming to IS:11171/85 IEC 60726 and complete with all accessories . The transformer shall have cable entry for both HV LV side. The transformer shall have Neutral CT of 50/5A 15VA Cl 5P10 for low set earth fault protection the relay shall be provided in the Main MSB panel. Transformer loss shall be as per latest ECBC guidline. (Refer detailed technical specification)

1

-

-

... More
od125570/2020_2021 : Installation, Testing and commissioning of dry type outdoor 11/0.433kV, 160kVA, 3 phase, Dyn11, 50 Hz, laser scribed core, copper wound Station auxiliary transformer with all necessary control wiring, interconnections as required complete.

1

-

-

... More
od125576/2020_2021 : DG Set Supply of 82.5 KVA radiator cooled, four stroke, multi cylinder electric start D.G Set developing a minimum of 80 BHP power with acoustic enclosure and control panel. The DG shall have AMF control panel The alternator shall be brushless, self excited, self regulated, brushless, suitable for prime operation at 1500 rpm, generating 415V +/- 5% at 0.8 p.f, 50Hz, 3 phase, 4 wire system generally conforming to BS: 2613 IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as anti vibration pad, 2 nos. lead acid batteries (as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, base fuel tank, Residential silencer, exhaust pipe insulated with hood on top suitable size cable termination box etc as required. The interconnection cable from the generator control panel to ESB for the AMF operation is included in this item. The AMF operation shall be achieved through ATS having AMF facility. The DG shall be provided with external battery charger suitable for lead acid battery provided along with DG set. The battery charger shall have trickle boost charge with selector switch, protection against over charging, DC ammeter voltmeter etc.with all accessories shall be provided in the DG control panel. Rate shall be inclusive of all necessary spares accessories.

1

-

-

... More
od125588/2020_2021 : Installation, Testing and commissioning of 82.5 KVA radiator cooled, four stroke, multi cylinder electric start D.G Set and its exhaust pipe as per CPCB norms. The interconnection cable from the generator control panel to ESB for the AMF operation is included in this item. Rate shall be inclusive of all lift, lead, first fill of lubricating oil, diesel for testing commissioning, civil work such as grouting, finishing etc excluding foundation as per single line diagram particular specification. The work should be as per Electrical Inspectorate / Pollution control board norms.

1

-

-

... More
LT PANEL BOARDS AND ACCESSORIES

-

-

-

... More
od125599/2020_2021 : MSB Supply of LT Panel (MSB) cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, Form 4, IP 42, free standing, indoor, floor mounting, dust and vermin proof, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires/cable, interconnection, duly powder coated etc., including supply of following switchgears, metering instruments and accessories in the LT Panel and as per specifications. Incomer 1 250A,4P, 36kA, MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over load short circuit protection with Rotary Handle - 1 No. Incomer 2 125A,4P, 36kA, MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over load short circuit protection with Rotary Handle - 1 No. 250A Auto Transfer Switch with AMF - 1 no BUSBARS 250 Amp TPN busbars of high conductivity electrolytic quality aluminium conductor INSTRUMENTS Voltmeter (0 to 500 V) for 3 phase, 4 wire operation with selector switch and 3 Nos. control MCBs -2 Set Ammeter (0 to 250A) with selector switch and 3 nos 250/5A CT's, 15VA, Class 1for 3phase, 4 wire operation -1 Set Ammeter (0 to 125A) with selector switch and 3 nos 125/5A CT's, 15VA, Class 1for 3phase, 4 wire operation -1 Set RYB phase indicating lamps, LED type -2 Set Digital Multifunction meter having kWh,V,A,Hz,PF- 2No. Surge Suppressor - 1 no Outgoing 125A, 36 kA,TP MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over load short circuit protection with Rotary Handle- 1no. 63A, 36 kA,TP MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over load short circuit protection with Rotary Handle- 7nos. 40A, 36 kA,TP MCCB with Thermal Magnetic release, Ics=Icu, having adjustable over load short circuit protection with Rotary Handle- 2nos. The panel shall be top/bottom entry type with all necessary interconnections and specifications as per single line diagram and technical specification

1

-

-

... More
od125607/2020_2021 : Installation, testing commissioning of LT Panel (MSB) cubicle type, indoor, floor mounting including internal wiring with suitable size wires/cable and all necessary interconnection as required complete

1

-

-

... More
od125645/2020_2021 : YARD LIGHTING PANEL Supply of Yard light Panel, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, wall mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. and with following accessoriescomplete as required as per specification. Incomer 40A 4 pole Isolator - 1 no Maintenance bypass 40A 4 pole Isolator - 1 no Instruments 24 hrs Digital Timer with inbuilt battery - 1 Nos. 40A, 4 Pole AC-1 contactor - 1 Nos Outgoing: 16A SP MCB - 4 nos

1

-

-

... More
od125665/2020_2021 : Installation, testing commissioning of LT Panel (Yard Lighting Panel) cubicle type, indoor, wall mounting including internal wiring with suitable size wires/cable and all necessary interconnection as required complete

1

-

-

... More
od125682/2020_2021 : DG SYNC PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 1 1000A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs, DG synchronising relay as indicated in Single Line Diagram - 1 set Incomer 2 1000A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs, DG synchronising relay as indicated in Single Line Diagram - 1 set Instruments (0 to 500)V Voltmeter for 3 phase, 4 wire operation with selector switch-2 set, 3 nos of (0-1000)A ammeter for 3 phase, 4 wire operation-2 set, 1000/5A 15VA class 1 resin cast CT-2 set, digital Multi function meters-2 set, LED indication lamps etc as required complete as per Single Line Diagram Busbar 2500A TPN busbar chamber with Aluminium busbar Outgoings 2500A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs as indicated in Single Line Diagram - 1 set The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125699/2020_2021 : MSB PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer -1 and 2 2500A, TPN, 50kA, EDO, ACB with Microprocessor based release with OL & SC protection - 2 No AMF relay-1 No Instruments 4A, C curve SP MCB - 6 Nos. RYB indication lamp, LED type - 2 set (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 2 set (0-2500)A ammeter Acc. class 1 with 90 deg defl. scale - 6 Nos. 2500/5A 15VA class 1 resin cast CT -6nos 2500/5A 15VA class 1 resin cast CT - For IPFC relay Digital power analyser/meter (V,A,F,PF,KW,KVA,KWH, THD, Harmonic Current, Harmonic Voltage) having RS 485 communication facilities - 2Nos. ON/OFF/TRIP indication lamp, LED type - 6 Nos. Busbar 2500A TPN busbar chamber with Aluminium busbar. Out goings 1250A, TP, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 2 Nos 1000A, TP, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 1 No 800A, TP, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 1 No 400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -3nos SMF battery with suitable battery charger (suitable for providing minimum 8hours back up for AMF relay) The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection and accessories as per particular specification and single line diagram.

1

-

-

... More
od125704/2020_2021 : A/C PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 1250A, FP, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 1 No Busbar 1250 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set (0-1250)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set 1250/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 800A, TPN, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 1 No 400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -4 nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125709/2020_2021 : UTILITY PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 800 A FP SDU-1 No Busbar 800 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set 3 nos of (0-800)A ammeter for 3 phase, 4 wire operation - 1 set 800/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 nos 200A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos 160A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125727/2020_2021 : LIFT PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 200A FP SDU-1 No Busbar 200A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set (0-200)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set 200/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -8 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125746/2020_2021 : LIGHTING SB Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 160 A FP SDU-1 No Busbar 160 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set 3 nos of (0-160)A ammeter for 3 phase, 4 wire operation - 1 set 160/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -6 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125769/2020_2021 : POWER SB Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 160 A FP SDU-1 No Busbar 160 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set 3 nos of (0-160)A ammeter for 3 phase, 4 wire operation - 1 set 160/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -9 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125785/2020_2021 : UPS PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 400 A FP SDU-1 No Busbar 400 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set 3 nos of (0-400)A ammeter for 3 phase, 4 wire operation - 1 set 400/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -4 Nos 40A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125793/2020_2021 : POWER LAB PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 400 A FP SDU-1 No Busbar 400 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set 3 nos of (0-400)A ammeter for 3 phase, 4 wire operation - 1 set 400/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -10 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification and single line diagram.

1

-

-

... More
od125829/2020_2021 : VRF PANEL Installation Testing and Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 800A, FP 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae - 1 set Busbar 800 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set (0-800)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set 800/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -3 Nos 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125833/2020_2021 : AHU PANEL Installation Testing Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 400A FP Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos Busbar 400 A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set (0-400)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set 400/5A 15VA class 1 resin cast CT - 3nos Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -7 Nos The panel shall be with top/bottom entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.

1

-

-

... More
od125836/2020_2021 : Pump panel - 1 Installation Testing and Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 400A, FP SDU- 1 no. BUSBARS 400 Amp TPN busbars of high conductivity electrolytic quality aluminium conductor INSTRUMENTS Voltmeter (0 to 500 V) for 3 phase, 4 wire operation with selector switch and 3 Nos. control MCBs -1 Set Ammeter (0 to 400A) with selector switch and 3 nos 400/5A CT's, 15VA, Class 1for 3phase, 4 wire operation -1 Set RYB phase indicating lamps, LED type -1 Set Outgoing 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos 10A TP 100kA MPCB - 2 nos 2.5A TP 100kA MPCB - 4 nos On/Off indication lamp, LED type for out goings - 4 set. 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors for 3 HP motor - 2 nos. 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors for 0.5 HP motor - 2 nos. Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, thermal overload relay, single phasing preventer and auxillary power contactors, ON/OFF indication lamps,capacitors in spare outlets

1

-

-

... More
od125844/2020_2021 : Pump panel - 2 Installation Testing and Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 250A, FP SDU- 1 no. BUSBARS 250 Amp TPN busbars of high conductivity electrolytic quality aluminium conductor INSTRUMENTS Voltmeter (0 to 500 V) for 3 phase, 4 wire operation with selector switch and 3 Nos. control MCBs -1 Set Ammeter (0 to 250A) with selector switch and 3 nos 250/5A CT's, 15VA, Class 1for 3phase, 4 wire operation -1 Set RYB phase indicating lamps, LED type -1 Set Outgoing 32A TP 25kA MPCB - 4 nos 16A TP 25kA MPCB - 2 nos 4A TP 100kA MPCB - 4 nos On/Off indication lamp, LED type for out goings - 8 set. 3 phase Star Delta starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors for 20 HP motor - 4 nos. 3 phase Star Delta starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors for 7.5 HP motor - 2 nos. 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary power contactors for 1.5 HP motor - 2 nos. Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, thermal overload relay, single phasing preventer and auxillary power contactors ON/OFF indication lamps,capacitors in spare outlets

1

-

-

... More
od125846/2020_2021 : 440kVAR CAPACITOR PANEL Installation Testing and Comissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer 1000A, FP, 50kA, EDO, ACB with Thermal Magnetic based release with OL SC protection - 1 No 4A, C curve SP MCB - 3 nos. RYB indication lamp, LED type - 3 nos. (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 no. (0-1000)A ammeter Acc. class 1 with90 deg defl. scale - 1 no. 6A 3 pole voltmeter selector switch - 1 no. 6A 3 pole ammeter selector switch - 1 no. 1000/5A 15VA class 1 resin cast CT - 3nos 1000A TPN busbar chamber with Aluminium busbar. Microprocessor based intelligent, 10 step IPFC relay with PF display - 1 No. Auto / manual selector switch - 1 nos. Out Going 125 A, 36kA, TP MCCB with adjustable thermal magnetic release with OL SC protection. 8 nos. 63A, 36kA, TP MCCB with adjustable thermal magnetic release with OL SC protection. 2 nos. 32A, 36kA, TP MCCB with adjustable thermal magnetic release with OL SC protection. 2 nos. 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 8 Nos. 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No. 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No. 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No. 50 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 8 Nos 25 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 Nos 10 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 Nos 5 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 No

1

-

-

... More
od125855/2020_2021 : EOT crane 5T Supply, Installation, Testing and Commissioning of EOT crane in the GIS Hall of appx. size- span 8m x height 9 m x LT 8 m having LT speed 40m/min and CT speed 20m/min. Main hoist capacity x hoist speed : 5T @ 8m/min. Hook height : 6m. Crane control: Pendent control, as per specification and standards.

1

-

-

... More
CABLES AND CABLING

-

-

-

... More
od125900/2020_2021 : Supply of following sizes of XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 kV grade earthed system conforming to IS 7098 amended upto date. 3C 400sq.mm. 11kV(E)

180

-

-

... More
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

30

-

-

... More
8.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etcAbove 120 sq. mm and upto 400 sq. mm

50

-

-

... More
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

10

-

-

... More
8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

90

-

-

... More
od125934/2020_2021 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 400 sq. mm

8

-

-

... More
od125969/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 400Sq.mm Al

20

-

-

... More
od125972/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 185 Sq.mm Al

530.7

-

-

... More
od125987/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 120 Sq.mm Al

419.3

-

-

... More
od125988/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 95 Sq.mm Al

50

-

-

... More
od125989/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 35 Sq.mm Al

3138.7

-

-

... More
od125991/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 16 Sq.mm Al

78

-

-

... More
od126012/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 2.5 Sq.mm Cu

810

-

-

... More
od126247/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 4 Sq.mm Cu

263

-

-

... More
od126248/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 2C 25 Sq.mm Al

20

-

-

... More
od126249/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 4 sqmm Cu

5901.8

-

-

... More
od126253/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 2.5 sqmm Cu

7296.2

-

-

... More
od126254/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 14C 2.5 sqmm Cu

475

-

-

... More
od126258/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 19C 1.5 sqmm Cu

1872

-

-

... More
od126260/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 2C 4 sqmm Cu

536

-

-

... More
od126261/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 2C 2.5 sqmm Cu

392

-

-

... More
od126262/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 10C 2.5 sqmm Cu

1308

-

-

... More
od126263/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 3.5C 400 sqmm Al

2

-

-

... More
od126287/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 4C 16 Sq mm Al

8

-

-

... More
od126302/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 3.5C 95 sqmm Al

2

-

-

... More
od126311/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 3C 2.5sqmm Cu

36

-

-

... More
od126361/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 3C 4 sqmm Cu

18

-

-

... More
od126363/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 2C 25 sqmm Al

2

-

-

... More
od126366/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 4C 4 sqmm Cu

90

-

-

... More
od126367/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 4C 2.5 sqmm Cu

442

-

-

... More
od126369/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 14C 2.5 sqmm Cu

8

-

-

... More
od126374/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 19C 1.5 sqmm Cu

50

-

-

... More
od126381/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 2C 4 sqmm Cu

18

-

-

... More
od126382/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 2C 2.5 sqmm Cu

10

-

-

... More
od126385/2020_2021 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor control cable of 1.1 KV grade as required. 10C 2.5 sqmm Cu

20

-

-

... More
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

6701

-

-

... More
7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

329

-

-

... More
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

458

-

-

... More
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

726

-

-

... More
7.2.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

3930

-

-

... More
7.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm

110

-

-

... More
7.2.3 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

190

-

-

... More
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

5403

-

-

... More
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

1596

-

-

... More
7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

47

-

-

... More
7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

60

-

-

... More
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

4430

-

-

... More
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

23

-

-

... More
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

40

-

-

... More
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

40

-

-

... More
14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia

150

-

-

... More
14.13.2 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required80 mm dia

50

-

-

... More
14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required100 mm dia

100

-

-

... More
od126741/2020_2021 : Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 900 MM WIDTH X 75 MM DEPTH X 2MM THICK

20

-

-

... More
od126728/2020_2021 : Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 600 MM WIDTH X 50 MM DEPTH X 2MM THICK

150

-

-

... More
od126729/2020_2021 : Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 450 MM WIDTH X 50 MM DEPTH X 2MM THICK

30

-

-

... More
od126730/2020_2021 : Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 300 MM WIDTH X 50 MM DEPTH X 2MM THICK

50

-

-

... More
od126791/2020_2021 : Fabrication, supply and installation of following size of perforated GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 450 MM WIDTH X 50 MM DEPTH X 2MM THICK

30

-

-

... More
od126792/2020_2021 : Fabrication, supply and installation of following size of perforated GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 600 MM WIDTH X 50 MM DEPTH X 2MM THICK

30

-

-

... More
od126793/2020_2021 : Fabrication, supply and installation of following size of perforated GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required 300 MM WIDTH X 50 MM DEPTH X 2MM THICK

30

-

-

... More
od126827/2020_2021 : Supply, Laying, jointing and testing ISI marked HDPE pipes with a size of 40mm of 10 kg/cm2 conforming to as per IS 4984,1985 PE-100 with saddles, plugs,coupling, MTA etc.including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools etc.as required.

30

-

-

... More
od126828/2020_2021 : Supply, Laying, jointing and testing ISI marked HDPE pipes with a size of 110mm of 10 kg/cm2 conforming to as per IS 4984,1985 PE-100 with saddles, plugs,coupling, MTA etc.including cost of all jointing materials, bolts, nuts, rubber washers, ferrule, pipe supports, hire of tools etc.as required.

30

-

-

... More
od126829/2020_2021 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required.

15250

-

-

... More
MCBs AND MCB DISTRIBUTION BOARDS

-

-

-

... More
od126979/2020_2021 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (8 + 24), Double door

1

-

-

... More
od127001/2020_2021 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (8 + 24), Double door

1

-

-

... More
od127002/2020_2021 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (8 + 18), Double door

1

-

-

... More
od127003/2020_2021 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (8 + 12), Double door

1

-

-

... More
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2

-

-

... More
2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

2

-

-

... More
od127041/2020_2021 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 4 pole 40 amps. (415 Volts),30mA sensitivity.

2

-

-

... More
od127042/2020_2021 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 2 pole 25 amps. (240 Volts), 30mA sensitivity-

1

-

-

... More
od127043/2020_2021 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 4 pole 40 amps. (415 Volts), 100mA sensitivity.

2

-

-

... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

42

-

-

... More
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

4

-

-

... More
od127076/2020_2021 : Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. 40 A TP MCB, C-CURVE

8

-

-

... More
od127082/2020_2021 : Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. 63 A TP MCB, C-CURVE

1

-

-

... More
2.23.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 6 way, Double door SPN MCBDB

2

-

-

... More
od127101/2020_2021 : Supplying and fixing following way,cable end box with all accessories as required compete for the following DBs 12 way double door horizontal type SPN DB

2

-

-

... More
2.24.1 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 4 way, Double door TPN MCBDB

1

-

-

... More
2.24.2 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB

1

-

-

... More
2.24.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB

1

-

-

... More
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.

1

-

-

... More
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

10

-

-

... More
2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

4

-

-

... More
od127237/2020_2021 : Supply, Installation, Testing and Commissioning of 63 amps, 415 volts, thermoplastic TPN industrial type, socket outlet, with 4 pole and earth, with 32 amps C curve, TPN, MCB, IP67 Receptacles switched , with mechanical interlock with heat and fire-resistant thermoplastic plug top on surface or in recess, inter connections, steel fasteners etc complete with all other accessories including MS supports or cutting the wall if required ,finishing ,making good the same etc complete.

2

-

-

... More
od127238/2020_2021 : Supply installation, testing and commissioning of DOL starter upto 3 HP,3ph motor in sheet steel enclosure including auxiliary contactors , SPP, all the necessary accessories as required complete.

4

-

-

... More
od127239/2020_2021 : Supply of 6-32A, 110 volts,DC Double pole Miniature circuit breakers as required.

30

-

-

... More
WIRING AND ACCESSORIES

-

-

-

... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

15

-

-

... More
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1

-

-

... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

300

-

-

... More
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

170

-

-

... More
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

100

-

-

... More
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

2

-

-

... More
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amps switch

7

-

-

... More
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

7

-

-

... More
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1

-

-

... More
1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1

-

-

... More
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1

-

-

... More
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

16

-

-

... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).

3

-

-

... More
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

3

-

-

... More
od127368/2020_2021 : Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc as required complete.

2

-

-

... More
od127369/2020_2021 : Supply fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)

2

-

-

... More
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

50

-

-

... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

30

-

-

... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

20

-

-

... More
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

10

-

-

... More
LIGHT FIXTURES AND ACCESSORIES

-

-

-

... More
od127371/2020_2021 : Supply of indoor decorative surface mounted LED Batten with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection,along with driver, maximum system wattage of 10 Watts,lumen output of lamp greater than 1000, power factor 0.9,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Model: Philips BN021 LED10S CDL or Wipro LL20-111-XXX-65-NE or LT WAND -W00957S000 - 2FT or equivalent approved make.

2

-

-

... More
od127372/2020_2021 : Supply of indoor surface mounted LED tube with Batten along with driver, surge protector, maximum system wattage of 40 Watts,lumen output of lamp greater than 4000 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro WIO922208 + 2 Nos. of 18W LED Tube Light or Crompton Greaves IGP132LT8-16+LT8-16

10

-

-

... More
od127373/2020_2021 : Supply of indoor surface mounted LED Batten with Polycarbonate Diffuser with provision of End to End connection,along with driver, maximum system wattage of 20 Watts,lumen output of lamp greater than 2000, power factor 0.9,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Philips BN021C LED20S PSU NW GR or Wipro LL20-221-XXX-65 NE or Crompton Greaves IGP131LT8-16+LTT8-20

2

-

-

... More
od127374/2020_2021 : Supply of 9 W LED Bulkhead with polycarbonate body to be fixed in wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required.(make:Wipro Moon LED LW 01 or equivalent approved make)

4

-

-

... More
od127375/2020_2021 : Supply of LED flood light with high pressure die cast aluminium housing,system wattage of 100+/-10Watts,lumen output of lamp greater than or equal to 10000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours , minimum system efficacy of 100lumen/watts ,with suitable driver and including all necessary accessories as required complete.Model:- Wipro LF20-132-060-57-XX or LT T12557F060 or equivalent approved make.

4

-

-

... More
od127377/2020_2021 : Supply of 380 mm sweep heavy duty exhaust fan in die cast aluminium with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton EXHD-380-6-1 or equivalant approved make)

1

-

-

... More
od127378/2020_2021 : Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make)

2

-

-

... More
od127379/2020_2021 : Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-High Speed or equivalent approved make).

1

-

-

... More
1.42 : Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescentfitting of all types, complete with all accessories and tube etc., including supplying and fixing balland socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cmlength, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated,copper conductor, single core cable and earthing etc. as required.

18

-

-

... More
od127392/2020_2021 : Installation, testing and commissioning of High bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.

4

-

-

... More
1.45 : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

1

-

-

... More
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.

25

-

-

... More
1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep

2

-

-

... More
od127419/2020_2021 : Supply, Installation, Testing and Commissioning of integral flood light luminaire (IP66) with maximum system wattage of 120W with lumen output not less than 12000lm, aluminium diecast housing powder coated, toughened glass with silicon gasket for IP66 protection, prewired complete with all necessary accessories as required including 120W LED lamp. (Make:Wipro Alpha LED LF20-132-060-57-G2 or LT transformer or equivalent approved make).

8

-

-

... More
EARTHING AND SAFETY EQUIPMENTS

-

-

-

... More
od127462/2020_2021 : Copper bonded Steel Rod Supply ,driving into earth 17.2 mm dia copper bonded Steel rod to augment the earth mat of the switch yard and connecting the same with 32mm dia Hot dip galvanized MS rod braced with all necessary connectors.

480

-

-

... More
od129085/2020_2021 : Earth Mat Design, Supply laying of 32mm dia MS rod earth mat in the switch yard at a depth of 0.6m from ground level, made up of risers including necessary welding, bracing and applying anticorrosive paints at the joints, after excavating the switch yard before the equipment foundation and concrete works, testing and commissioning and interconnection to equipments, to yard fencing complete.

1600

-

-

... More
od129086/2020_2021 : Earth Mat Design, Supply laying of 25mm MS rod earth mat in the switch yard at a depth of 0.6m from ground level, made up of risers including necessary welding, bracing and applying anticorrosive paints at the joints, after excavating the switch yard before the equipment foundation and concrete works, testing and commissioning and interconnection to equipments, to yard fencing complete.

100

-

-

... More
od127463/2020_2021 : Earth Wire Supply, stringing, testing commissioning of 7/3.15 mm steel wire for earth wire as per IS 2141 with required hardwares accessories etc. complete as per standards and approved drawings (It includes cost of Earthwire, hardwares and accessories etc. (For details refer Detailed Technical Specification)

150

-

-

... More
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required

2

-

-

... More
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

6

-

-

... More
od127475/2020_2021 : Supplying and laying 8 swg GI wire at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)

6522

-

-

... More
od127476/2020_2021 : Supplying and laying 3.15mm Cu (10 SWG) Copper wire at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of nut bolt spring washer spaced at 50mm)

250

-

-

... More
od127477/2020_2021 : Supplying and laying 25mm X 3mm Cu strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of nut bolt spring washer spaced at 50mm)

30

-

-

... More
od127478/2020_2021 : Supplying and laying 25mm X 6mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)

220

-

-

... More
od127479/2020_2021 : Supplying and laying 50mm X 6mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)

20

-

-

... More
od127480/2020_2021 : Providing and fixing 8 swg GI wire GI wire on surface or in recess for connections etc. as required.

454

-

-

... More
od127481/2020_2021 : Providing and fixing 3.15mm Cu (10 SWG) Cu wire on surface or in recess for connections etc. as required.

340

-

-

... More
od127482/2020_2021 : Providing and fixing 25mm X 3mm Cu Cu strip on surface or in recess for connections etc. as required.

50

-

-

... More
od127483/2020_2021 : Providing and fixing 25mm X 6mm GI GI strip on surface or in recess for connections etc. as required.

150

-

-

... More
od127484/2020_2021 : Providing and fixing 50mm X 6mm GI GI strip on surface or in recess for connections etc. as required.

140

-

-

... More
od127505/2020_2021 : Supply and fixing anodised aluminum glass framed shock treatment chart.

1

-

-

... More
od127506/2020_2021 : Supplying of Rubber hand gloves suitable for 11 KV.

3

-

-

... More
od127507/2020_2021 : Supply and fixing of First aid box

1

-

-

... More
od127508/2020_2021 : Supply and providing 2mx1mx2.5mm thick ISI marked electrical 11kV grade anti-skid rubber mat as per IS:15652.for the following sizes.

10

-

-

... More
od127509/2020_2021 : Supply and providing 2mx1mx2mm thick ISI marked electrical 11kV grade anti-skid rubber mat as per IS:15652.for the following sizes.

5

-

-

... More
od127525/2020_2021 : Supply of outdoor duty Trolley mounted Co2 type Fire Extinguisher 22.5 Kgs Capacity, made from Seamless Manganese Steel Cylinder as per IS: 2878,Convex/Flat Base and locking pin and wire seal provided , fitted with Discharge hose and horn and valve with initial Charge as per IS: 3224 specification, bearing ISI Mark and CCE approval.

2

-

-

... More
od127526/2020_2021 : Supply of Co2 type Fire Extinguisher 4.5 Kgs Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and Wheel type valve with initial Charge as per IS: 15683-2006 specification, bearing ISI Mark.

2

-

-

... More
od127527/2020_2021 : Supply of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher is manufactured strictly as per IS: 15683:2006 with ISI mark.

2

-

-

... More
od127528/2020_2021 : Supply, fabrication and fixing 3 nos MS Fire buckets on suitable fabricated MS angle iron stand with hook, painting with red paint filled with dry sand as required with all required accessories.

2

-

-

... More
MISCELLANEOUS ITEMS

-

-

-

... More
od127563/2020_2021 : Supply and fixing warning and danger retro- reflectorised sign made of high intensity grade sheeting vide clause 801.3 (IRC 67), fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm, with letters in Hindli , English and Malayalam, figures in conventional skull and bones in signal red colour including writing the following, "DANGER", "NO ENTRY", "TRESPASSING NOT ALLOWED" in letter of approximate height 20cm and fixed on wall/fencing with nut, bolt, washer of approved size for HT 110KV installation and all as per the direction of the Engineer-in-Charge.

4

-

-

... More
od127564/2020_2021 : Supply installation testing and commissioning of fascia signage with content " 110KV GAS INSULATED SUBSTATION" made up with ACP base of thickness 3.25mm and acrylic letters made up of 1.8 mm acrylic sheet and with 2.45 inch projection screwed on 3mm Forex sheet . Back lit uniform illumination is achieved using white LED of approved make with all the necessary wiring, contacts and supports. The signboard shall be installed with all the required structural supports to be fix with angle iron, MC , MS flat frame work stand or on wall including cost of all materials used and all as directed by the Engineer-in-Charge.

1

-

-

... More
Substation Building - Earth Work

-

-

-

... More
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

130

-

-

... More
2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

10

-

-

... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

444.37

-

-

... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

708.33

-

-

... More
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

91.86

-

-

... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.47

-

-

... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

1081.87

-

-

... More
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

30

-

-

... More
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

58

-

-

... More
Concrete Work

-

-

-

... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

62

-

-

... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

0.5

-

-

... More
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

17.18

-

-

... More
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .

60

-

-

... More
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

17.18

-

-

... More
RCC Work

-

-

-

... More
od74436/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. All work upto plinth level.(Note:- Minimum Cement content considered in this item is @ 330 kg/ cum.Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account)

214.81

-

-

... More
od74441/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. All work above plinth level upto floor V level.(Note:- Minimum Cement content considered in this item is @ 330 kg/ cum.Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account)

82.67

-

-

... More
od74444/2018_2019 : Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.

13.7

-

-

... More
od74449/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

35462

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

249.99

-

-

... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

650.35

-

-

... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

277.58

-

-

... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

324.6

-

-

... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

700.35

-

-

... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

96.6

-

-

... More
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

26.86

-

-

... More
5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

660.54

-

-

... More
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.

103.9

-

-

... More
Masonry Work

-

-

-

... More
50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

30.6

-

-

... More
50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

76.59

-

-

... More
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

21.29

-

-

... More
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.

32.35

-

-

... More
Random Rubble Work

-

-

-

... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

49.79

-

-

... More
Steel Work

-

-

-

... More
od74437/2018_2019 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In gratings, frames, guard bar, ladders, railings, brackets, gates similar works.

2541

-

-

... More
od74445/2018_2019 : Structural steel work welded in single sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge at all levels.

4563.02

-

-

... More
10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

104.98

-

-

... More
9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

263.25

-

-

... More
Joinery Work

-

-

-

... More
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

169

-

-

... More
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

169

-

-

... More
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

27

-

-

... More
21.15.1 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Anodized (AC 15 ) aluminium

10

-

-

... More
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

4.95

-

-

... More
9.21.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

3

-

-

... More
9.126.1 : Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710

3

-

-

... More
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick

6

-

-

... More
9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4

-

-

... More
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

4

-

-

... More
9.88 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

2

-

-

... More
9.92.1 : Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm

4

-

-

... More
9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm

4

-

-

... More
50.9.15.2 : Supplying and fixing 300 mm Aluminium aldrop

2

-

-

... More
9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm

2

-

-

... More
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

6

-

-

... More
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.

2

-

-

... More
9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded

15

-

-

... More
od74457/2018_2019 : Providing and fixing IS : 12817 marked stainless steel ball bearing hinges (heavy weight) with stainless steel screws etc. complete: 100x89x3 mm

12

-

-

... More
9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately

6

-

-

... More
9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).

2

-

-

... More
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

4

-

-

... More
od74458/2018_2019 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):Pin headed glass. With pin headed glass panes of 4.0 mm thickness

0.45

-

-

... More
od74459/2018_2019 : Supplying and fixing rolling shutters of approved make,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25mm thick top cover

28

-

-

... More
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).

3

-

-

... More
10.8.2 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 16.80 sqm in area

20

-

-

... More
10.7 : Providing and fixing ball bearing for rolling shutters.

4

-

-

... More
14.70 : Melamine polishing on wood work ( one or more coat)

4

-

-

... More
Flooring Work

-

-

-

... More
od74438/2018_2019 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, etc. complete as per the direction of Engineer in charge

187.29

-

-

... More
od74442/2018_2019 : Providing and applying 2mm thick high strength epoxy flooring system of approved brand over the cured layer using serrated trowel and spike roller after Preparing the surface of concrete floor by dry grinding depending upon the condition of floor surface to remove laitance, loose concrete etc,repair of existing floor if any and to provide key on the floor surface to receive the floor coating and topping and applying epoxy coating as per manufactures specification.The rate shall include cost and conveyance of all material ,labour charges, lead etc. complete as directed by Engineer - in- charge. (All works covered by this specification shall be carried by an experienced agency having sufficient experience in this type of flooring system Only skilled and experienced persons shall be employed for this purpose.)

169.29

-

-

... More
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick

14.13

-

-

... More
od74448/2018_2019 : Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

3

-

-

... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12

-

-

... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

20.72

-

-

... More
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

4

-

-

... More
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

1

-

-

... More
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

1

-

-

... More
Finishing Work

-

-

-

... More
od74439/2018_2019 : 12mm cement plaster of mix 1:6 (1 cement : 6 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

584.33

-

-

... More
od74443/2018_2019 : 15mm cement plaster of mix 1:6 (1 cement : 6 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

583

-

-

... More
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

310.32

-

-

... More
od74447/2018_2019 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement over roof slab to act as protective layer for acrylic polymer modified elastomeric cementitious water proof coating.

312

-

-

... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

894

-

-

... More
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

222

-

-

... More
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

382

-

-

... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

894

-

-

... More
od74451/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)

312

-

-

... More
13.24.1 : Extra for plastering done on moulding cornices or architraves including neat finish to line and level:In one coat

7

-

-

... More
Miscellaneous Building Work

-

-

-

... More
od74440/2018_2019 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )

209.67

-

-

... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

2.5

-

-

... More
19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe

10

-

-

... More
od76922/2018_2019 : Providing and laying non-pressure NP4 class (heavy duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete: 300 mm dia R.C.C. pipe

48

-

-

... More
od74452/2018_2019 : Providing G.I pipes for Trenches and similar works by welding etc., including applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer- in-Charge at all levels. G.I. pipes

7.2

-

-

... More
Chain Link Fencing

-

-

-

... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

14.39

-

-

... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

6

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

51.84

-

-

... More
15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

14.39

-

-

... More
od74446/2018_2019 : Structural steel work welded in built up sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges, lead,lift etc complete as directed by Engineer in Charge at all levels.

1040.26

-

-

... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

22.96

-

-

... More
od74450/2018_2019 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers , with necessary locking arrangements etc required complete as per the direction of Engineer-in- charge. Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade

192

-

-

... More
od74452/2018_2019 : Providing G.I pipes for Trenches and similar works by welding etc., including applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer- in-Charge at all levels. G.I. pipes

1676.25

-

-

... More
od74453/2018_2019 : Spreading of departmentally supplied 6-12mm broken stone aggregates in areas and compacting including cost and conveyance of all tools labour etc. complete as directed by the Engineer in Charge.

107.82

-

-

... More
od74454/2018_2019 : Supplying and stacking 6-12mm broken stone aggregates including cost and conveyance of all material labour etc as specified by the Engineer in Charge at all levels.

107.82

-

-

... More
Compound Wall Works

-

-

-

... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

40.56

-

-

... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

7.77

-

-

... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

42.56

-

-

... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

1.6

-

-

... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1

-

-

... More
50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

6.65

-

-

... More
4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

0.55

-

-

... More
od74436/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work upto plinth level

4.17

-

-

... More
od74441/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work above plinth level upto floor V level

1.22

-

-

... More
od74449/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

754

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

10.4

-

-

... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

19.08

-

-

... More
5.9.15 : Centering and shuttering including strutting, etc. and removal of form for:Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

2.42

-

-

... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

14.12

-

-

... More
od74455/2018_2019 : Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, bending, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.

900

-

-

... More
13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

42

-

-

... More
13.2.2 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)

42

-

-

... More
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

90

-

-

... More
Dismantling Works

-

-

-

... More
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

12

-

-

... More
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

8.4

-

-

... More
Oil Sump

-

-

-

... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

69.03

-

-

... More
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

17.26

-

-

... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

32.73

-

-

... More
2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

8.18

-

-

... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

50.36

-

-

... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

1.95

-

-

... More
od74436/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work upto plinth level

13.17

-

-

... More
od74444/2018_2019 : Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.

0.13

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.99

-

-

... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

55.6

-

-

... More
od74449/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

1383

-

-

... More
od74445/2018_2019 : Structural steel work welded in single sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge at all levels.

11

-

-

... More
od74447/2018_2019 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement over roof slab to act as protective layer for acrylic polymer modified elastomeric cementitious water proof coating.

40

-

-

... More
od74451/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)

40

-

-

... More
UG Sump

-

-

-

... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

18.32

-

-

... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

7.17

-

-

... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

0.93

-

-

... More
od74436/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work upto plinth level

3.35

-

-

... More
od74444/2018_2019 : Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.

1.36

-

-

... More
od74449/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

488

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

2

-

-

... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

22

-

-

... More
od74445/2018_2019 : Structural steel work welded in single sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge at all levels.

10

-

-

... More
od74447/2018_2019 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement over roof slab to act as protective layer for acrylic polymer modified elastomeric cementitious water proof coating.

18

-

-

... More
od74451/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)

18

-

-

... More
Septic tank- 20 User , Soak Pit

-

-

-

... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

13.93

-

-

... More
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

4.72

-

-

... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

6.72

-

-

... More
2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

1.68

-

-

... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

21.88

-

-

... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

0.88

-

-

... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

0.34

-

-

... More
od74444/2018_2019 : Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.

1.2

-

-

... More
od74449/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

121.24

-

-

... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

1.86

-

-

... More
50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

4.73

-

-

... More
50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

0.8

-

-

... More
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.

8.03

-

-

... More
od74456/2018_2019 : Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height, providing and filling brick bats graded, upto a height of 1.2 m, providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.

1

-

-

... More
Road Works

-

-

-

... More
3.6 : Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

585.89

-

-

... More
3.18 : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

273.78

-

-

... More
4.1.A.2 : Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401Grading-II - Plant Mix Method

98.71

-

-

... More
4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

117.99

-

-

... More
5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

117.99

-

-

... More
5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

889.92

-

-

... More
5.4.2a : Dense Graded Bituminous Macadam :- For Grading II (26.5 mm nominal size)Providing and laying dense graded bituminous macadam with 80-100 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG 30) @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

35.6

-

-

... More
5.6.2.a : Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respectsGrading - II (13.2 mm Nominal Size)

17.45

-

-

... More
SANITARY WORKS

-

-

-

... More
od47285/2018_2019 : Providing and fixing of star white vitreous china under counter wash basin of approved size and make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs, 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve, etc. complete as directed by the Engineer-in-charge.charge.(The purchase price of under counter WB is Rs 1463/-,CP brass pillar cock is Rs1328/-,CP brass angle valve-Rs810/-,CP brass bottle trap-Rs1125/- , CP brass waste coupling is Rs 400/- and any deviation plus or minus inthepurchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).

1

-

-

... More
od47286/2018_2019 : Providing and fixing CP brass hand spray with lever control (health faucet) of make 1meter long flexible tube and wall hook,CP brass angle valve and all fittings etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(The purchase price(inclusive of all taxes)of CP brass health faucet with CP brass angle valve is Rs 2090/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor) Details of cost for one no. MATERIAL:

1

-

-

... More
od47287/2018_2019 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels

2

-

-

... More
od47288/2018_2019 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931 25 mm nominal bore

2

-

-

... More
od47289/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame Round Frame with Flat Round Cover with Rubber Seal SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels. 75mm dia

1

-

-

... More
od47290/2018_2019 : Providing and fixing CP robe hook etc complete testing and commissioning to the satisfaction of Engineer in Charge at all levels.

1

-

-

... More
od47291/2018_2019 : Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing.

1

-

-

... More
od47292/2018_2019 : Providing and fixing liquid soap dispenser of approved make including cost and conveyance of all materials, labour charges ,lead, lift, cutting and making good the walls, floors and slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels .(The purchase price of liquid soap dispenser is Rs 1260 and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor)

1

-

-

... More
od47294/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame Round Frame with Flat Round Cover with Rubber Seal SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels. 110mm dia

1

-

-

... More
od52788/2018_2019 : Providing and fixing white vitreous china wall hung water closet (European type) with seat and lid, ceramic cistern C.P. flush bend with fittings C.I. brackets, 40 mm flush bend,angle valve, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

1

-

-

... More
od52789/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame Round Frame with Flat Round Cover with Rubber Seal SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-charge at all levels. 110mm Dia

1

-

-

... More
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

1

-

-

... More
WATER SUPPLY

-

-

-

... More
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

3

-

-

... More
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

33

-

-

... More
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

3

-

-

... More
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

2

-

-

... More
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

1

-

-

... More
18.33.1 : Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

2

-

-

... More
18.19.1.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):25 mm nominal boreHorizontal

2

-

-

... More
od47308/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. 65mm Dia

1

-

-

... More
od47314/2018_2019 : Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.

1

-

-

... More
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

1000

-

-

... More
2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

10

-

-

... More
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia

150

-

-

... More
50.18.9.9.1 : Providing and fixing PVC pipes including jointing of pipes and fittings, with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

9

-

-

... More
50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes and fittings with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

3

-

-

... More
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes and fittings with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

132

-

-

... More
od47320/2018_2019 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency Capacity : 2.5 m3/hrHead : 11 m

2

-

-

... More
od47322/2018_2019 : Supplying and fixing of portable drainage pump, with CI construction, CI impeller, mechanical seal, complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels Capacity: 10m3/hr Head: 15 m

2

-

-

... More
od47323/2018_2019 : Providing and fixing enclosed type water meter (bulk type) 50mm dia conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber etc. (The tail pieces if required will be paid separately) including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge.

1

-

-

... More
od47331/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 100mm dia

1

-

-

... More
od47332/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 80mm dia

1

-

-

... More
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2

-

-

... More
19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

1

-

-

... More
od47338/2018_2019 : Providing and fixing CI vent cowl as directed by the Engineer in Charge at all levels 80 mm dia

1

-

-

... More
od47343/2018_2019 : Providing and laying non-pressure NP4 class (heavy duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete: 300 mm dia R.C.C. pipe

15

-

-

... More
od47345/2018_2019 : Providing and fixing C.I. grating 150x150 mm as directed by the Engineer-in-charge

6

-

-

... More
od52918/2018_2019 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia RCC pipes.

15

-

-

... More
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

6

-

-

... More
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

3

-

-

... More
50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

3

-

-

... More
50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

12

-

-

... More
50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

3

-

-

... More
18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes

57

-

-

... More
od53017/2018_2019 : Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 32mm

2

-

-

... More
50.18.9.18.1 : Providing and fixing PVC pipes,fittings including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

72

-

-

... More
50.18.9.18.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall

9

-

-

... More
50.18.9.19.1 : Providing and fixing PVC pipes,fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

3

-

-

... More
50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

2

-

-

... More
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

1

-

-

... More
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

6

-

-

... More
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

3

-

-

... More
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

6

-

-

... More
HVAC EQUIPMENT

-

-

-

... More
od117271/2020_2021 : Supply, Installation,Testing and Commissioning of minimum nominal capacity 2.0TR Split air conditioning unit (BEE 3 Star Rated) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor,R410a/407c/R32 refrigerant, including fixing the outdoor unit as per manufacturers recommendation and fixing of room (High wall) unit on wall, fully copper coils with hydrophilic coating, necessary power and control cabling (indoor to outdoor), outdoor vibration isolators, suitable size CPVC drain pipe with 9mm thick round nitrile rubber insulation with factory laminated 7mils fibre glass cloth, including chasing, drilling, concealing and making good the same on walls etc.vibration isolators, charging of refrigerant gas, MS condenser stand, cordless remote etc complete as required. Suitable for single phase 230 V supply and with suitable stabilizer etc complete in all respects as per the technical Specification.

5

-

-

... More
od117273/2020_2021 : Supply, Installation,Testing and Commissioning of minimum nominal capacity 1.0 TR Split air conditioning unit (BEE 3 Star Rated) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor,R410a/407c /R32 refrigerant, including fixing the outdoor unit as per manufacturers recommendation and fixing of room (High wall) unit on wall, fully copper coils with hydrophilic coating, necessary power and control cabling (indoor to outdoor), outdoor vibration isolators, suitable size CPVC drain pipe with 9mm thick round nitrile rubber insulation finished with factory laminated 7 mils fibre glass cloth including chasing, drilling, concealing and making good the same on walls etc.vibration isolators, charging of refrigerant gas, MS condenser stand, cordless remote etc complete as required. Suitable for single phase 230 V supply and with suitable stabilizer etc complete in all respects as per the technical Specifcation.

3

-

-

... More
od117274/2020_2021 : Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation with factory laminated 7mils woven fibre glass cloth insulation shall have antimicrobial properties as per specification for 2.0 TR / 1.0TR machine between indoor each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing, drilling, concealing and making good the same on walls etc as per site conditions . complete in all respects as per the technical specifications.

59

-

-

... More
od117275/2020_2021 : Supply, installation, testing and commissioning of cabinet fans (duct mounted) of 4600 CFM - 25 MM OF WG (min. external static pressure) with suitable blower, 3 phase direct driven motor of following capacity for exhaust, with starter, other accessories etc. complete in all respects as required by the standard specifications.(Location: Ventilated Rooms )

1

-

-

... More
od117276/2020_2021 : Supply, installation, testing and commissioning of Axial fan of 1000 CFM - 10 MM OF WG (min. external static pressure) with suitable blower, 3 phase direct driven motor of following capacity for fresh air, with starter, other accessories etc. complete in all respects as required by the Technical specifications.(Location: Ventilated Rooms )

1

-

-

... More
Air Distribution System

-

-

-

... More
16.12.1.3 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular dueling as per IS 655-2006

5

-

-

... More
16.12.1.2 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

10

-

-

... More
16.12.1.1 : Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006

56

-

-

... More
16.17 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminum with aluminum volume control dampers with anti smudge ring and removable core.

1

-

-

... More
16.18 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring and removable core.

1

-

-

... More
16.15 : Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

1

-

-

... More
16.16.a : Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

2

-

-

... More
od117289/2020_2021 : Supply,fixing, testing and balancing of Aluminium Exhaust Air louvers , dampers, fixing supports . complete in all respects as per the technical specifications.

1

-

-

... More
16.13 : Supply, Insulation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. GI volume control duct damper

1

-

-

... More
od117291/2020_2021 : Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc. . complete in all respects as per the technical specifications.

1

-

-

... More
UPGRADATION OF ELECTRICAL SYSTEM- LT PANEL BOARD

-

-

-

... More
od321166/2020_2021 : Supply and ITC of Outdoor Lighting Panel (ODP) cubicle type fabricated out of IP 65 IK 08 free standing,thermoplastic floor mounting, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply Including supply & installation of following switchgears, instruments and accessories in the LT Panel and as per specifications, internal wiring with suitable size HFFR wires/cable, and including all works for foundation like excavation, PCC, brick work , plastering, finishing etc. and as per specifications as required. INCOMER 32 A, FP, 10kA, MCB - 1 No, SPD Type 1+2-1 set, BUSBARS 40Amp TPN busbars of high conductivity electrolytic quality aluminium alloy - 1 Set INSTRUMENTS 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 1 Set OUTGOINGS 25 A, FP RCCB (100mA)-8Nos 25 A C Curve FP MCB-8 Nos 24 hrs Digital time switch with inbuilt battery - 8 Nos. 25A, AC-1 contactor - 8 Nos"

4

-

-

... More
od321170/2020_2021 : Panel 4 Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. Incomer-1 250A FP SDU-1 no Busbar 250A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 1 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set Ammeter( 0-400A) - 3Nos. 250/5A 5VA class 1 resin cast CT - 1nos Digital multifunction meter ( V, A, F,pf,kW, kWh) - 1No. Out goings 160A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 1No. 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 5nos. 25A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 10nos.

1

-

-

... More
od321173/2020_2021 : Panel 3 Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. Incomer-1 250A FP SDU-1 no Busbar 250A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 1 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set Ammeter( 0-400A) - 3Nos. 250/5A 5VA class 1 resin cast CT - 1nos Digital multifunction meter ( V, A, F,pf,kW, kWh) - 1No. Out goings 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 5nos. 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 6nos. 25A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 1no.

1

-

-

... More
od321175/2020_2021 : Panel 1 Supply, Installation, Testing & Commissioning of LT Switch Board ,cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, freestanding, floor mounting, dust and vermin proof, indoor, compartmentalised,suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars ,including internal wiring with suitable size HFFR wires/cable, interconnection, dulypowder coated with seven tank process etc., including following components asper drawing and technical specifications. Incomer-1 250A FP SDU-1no Busbar 250A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 1 Nos. RYB indication lamp, LED type- 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selectorswitch - 1 set Ammeter( 0-400A) - 3Nos. 250/5A 5VA class 1 resin castCT - 1nos Digital multifunction meter ( V, A, F,pf,kW, kWh) - 1No. Outgoings 125A TP+NL Moulded Case Circuit Breaker with thermal release andneutral link (Ics =100%Icu= 25KA).- 1no. 63A TP+NL Moulded Case CircuitBreaker with thermal release and neutral link (Ics =100%Icu= 25KA).-4nos. 25A TP+NL Moulded Case Circuit Breaker with thermal release andneutral link (Ics =100%Icu= 25KA).- 4nos.

1

-

-

... More
od321178/2020_2021 : Panel 2 Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. Incomer-1 250A FP SDU-1 no Busbar 250A TPN busbar chamber with Aluminium busbar Meters 4A, C curve SP MCB - 1 Nos. RYB indication lamp, LED type - 3 Nos. (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set Ammeter( 0-400A) - 3Nos. 250/5A 5VA class 1 resin cast CT - 1nos Digital multifunction meter ( V, A, F,pf,kW, kWh) - 1No. Out goings 160A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 3nos. 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 1no. 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 6nos. 25A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA).- 1no.

1

-

-

... More
CABLES AND CABLING

-

-

-

... More
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

8

-

-

... More
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

6

-

-

... More
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

10

-

-

... More
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

8

-

-

... More
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)

38

-

-

... More
od321186/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 70 Sq.mm Al

570.9

-

-

... More
od321189/2020_2021 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 240 Sq. mm Al

1111

-

-

... More
7.2.4 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm

295

-

-

... More
7.5.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 35 sq. mm and upto 95 sq. mm

20

-

-

... More
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

20

-

-

... More
7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. mm

20

-

-

... More
7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm

100

-

-

... More
7.6.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 35 sq. mm and upto 95 sq. mm

100

-

-

... More
7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm

180

-

-

... More
7.7.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

50

-

-

... More
od321191/2020_2021 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 40mm

100

-

-

... More
14.14.1 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.100 mm dia

100

-

-

... More
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.

100

-

-

... More
od321192/2020_2021 : Supplying and installing following 150 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

30

-

-

... More
od321193/2020_2021 : Dismantling of existing electric post including cross arms , insulators, ACSR and all allied accessories and shifting the same to a location as instructed by Engineer-in Charge

50

-

-

... More
od321194/2020_2021 : Supply of following sizes of XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade(earthed) conforming to IS 7098 amended upto date. 3C X 300 sq.mm.

3660

-

-

... More
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

1500

-

-

... More
8.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etcAbove 120 sq. mm and upto 400 sq. mm

1990

-

-

... More
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

170

-

-

... More
10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

10

-

-

... More
10.6.4 : Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm

10

-

-

... More
EARTHING

-

-

-

... More
od321260/2020_2021 : Supply of Earthing with C.I. earth pipe 3 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 600X600mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate)

16

-

-

... More
EXTERNAL LIGHTING

-

-

-

... More
od321168/2020_2021 : Supply, installation, testing and commissioning of 6m long square GI pole with double arm and inbuilt LED light module of wattage 60W+/-5,lumen output of 90 lumens/watt on both the arms, with built- in control box prewired, concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories. complete including necessary civil foundation. Along with integrated LED light module on both arms housing inbuilt driver,system wattage maximum of 60+/-5 watts each , power factor >0.9, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly. (Make:Klite ID KP 7222 or equivalent approved make.)

20

-

-

... More
od321169/2020_2021 : Supply, installation, testing and commissioning of 6m long square GI pole with single arm and inbuilt LED light module of wattage 60W+/-5,lumen output of 90 lumens/watt , with built- in control box prewired, , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories. complete including necessary civil foundation. Along with integrated LED light module on the arm housing inbuilt driver,system wattage maximum of 60+/-5 watts, power factor >0.9, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly.( Make :Klite ID KP 7221 or equivalent approved make.)

94

-

-

... More
od321174/2020_2021 : Supply, installation, testing and commissioning of 3m long square GI pole with single arm and inbuilt LED light module of wattage 24W+/-5,lumen output of 90 lumens/watt with built- in control box prewired,, concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories. complete including necessary civil foundation. Along with integrated LED light module on the arm housing inbuilt driver,system wattage maximum of 24+/-5 watts, power factor >0.9, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly.( Make :Klite ID KP 4793 or equivalent approved make.)

103

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved