Roads And Bridges Development Corporation Of Kerala Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
₹ 17,700Tender Fee
₹ 17,700
Summary
Civil And Electrical Works For Developing Cusat As International Centre Of Excellence In Academics And Research Package 1 Part A
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RBDCK_709371_1Tender No
RBDCK/T220/CUSAT/PKG1/PART A/356/2024Tender Authority
Roads And Bridges Development Corporation Of Kerala Limited ViewPurchaser Address
-Website
http://http://www.rbdck.com/Package Tenders
RBDCK/T220/CUSAT/PKG1/165/2022RBDCK/T220/CUSAT/PKG1/168/2022RBDCK/T220/CUSAT/PKGV/243/2023...more
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
84
-
-
... More
CONCRETE WORK
-
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
552.53
-
-
... More
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
446.83
-
-
... More
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
446.83
-
-
... More
R.C.C. WORK
-
-
-
... More
od46088/2017_2018 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:-Minimum Cement content shall be 330 kg/ cum.All work above plinth level upto floor V level
2464.81
-
-
... More
od46089/2017_2018 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Minimum Cement content shall be @ 330 kg/ cum.All work upto plinth level
384.63
-
-
... More
od46095/2017_2018 : Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Minimum Cement content for M-30 grade shall be 340 kg/cum).
2849.85
-
-
... More
5.13 : Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in vertical fin walls up to floor five level, including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
146.88
-
-
... More
od46097/2017_2018 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels.Thermo-Mechanically Treated bars of grade Fe-500D or more.
326239.07
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
2175.74
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
9431.72
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
6011.14
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
3159.89
-
-
... More
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
203.22
-
-
... More
5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
7997.69
-
-
... More
MASONRY WORK
-
-
-
... More
50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
171.55
-
-
... More
50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
1770.08
-
-
... More
50.6.1.6 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
131.69
-
-
... More
od46093/2017_2018 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part 1 of 1979 for Super structure above plinth level upto floor five level for 10 cm thick wall in: Cm 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete.
227.13
-
-
... More
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
1852.7
-
-
... More
JOINERY WORKS
-
-
-
... More
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
13263.59
-
-
... More
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
13263.59
-
-
... More
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
3299.06
-
-
... More
od46094/2017_2018 : Add for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory window shutters ( Area of opening for glass panes excluding portion inside rebate shall be measured.)
2827.46
-
-
... More
21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
36.96
-
-
... More
21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
169
-
-
... More
21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
94
-
-
... More
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
83.04
-
-
... More
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
4.95
-
-
... More
9.5.1.1 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters
180
-
-
... More
14.70 : Melamine polishing on wood work ( one or more coat)
468
-
-
... More
9.14 : Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. ( Shutter area to be measured)
180
-
-
... More
9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood
180
-
-
... More
9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
300
-
-
... More
9.74.2 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm
626
-
-
... More
9.81.1 : Providing and fixing bright finished brass handles with screws etc. complete:125 mm
482
-
-
... More
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
169
-
-
... More
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
169
-
-
... More
50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop
75
-
-
... More
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
428.8
-
-
... More
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
132.72
-
-
... More
od46110/2017_2018 : Design,Supply and installation of factory made uPVC white colour sliding glazed windows of 2.4mx1.5m,comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles,including providing 5mm thick float glass panels of approved make,necessary hardwares including handles and SS screws,after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
471.6
-
-
... More
STEEL WORK
-
-
-
... More
od46087/2017_2018 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
6936.93
-
-
... More
od46090/2017_2018 : Structural steel work welded in built up sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges, lead,lift etc complete as directed by Engineer in Charge at all levels.
13338
-
-
... More
od46092/2017_2018 : Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anti-corrosive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by Engineer-in-Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25 mm thick top cover.
55.35
-
-
... More
10.7 : Providing and fixing ball bearing for rolling shutters.
8
-
-
... More
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
5940
-
-
... More
FLOORING
-
-
-
... More
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
9122
-
-
... More
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
344.85
-
-
... More
11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
479.18
-
-
... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
809.08
-
-
... More
8.13.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
353.28
-
-
... More
od1921/2018_2019 : Providing edge moulding to 18 mm thick granite stone counters, vanities,step nosings etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.
1152
-
-
... More
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
104.18
-
-
... More
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
128
-
-
... More
od46100/2017_2018 : Providing and laying 150mm thick Vaccum dewatered reinforced concrete flooring in M-30 design mix with 20mm and down graded coarse aggregate in required level,machine mixing with plasticizer and 12 mm cut length secondary reinforcement of approved quality, micro silica with a dossage of 3.5 kg per bag of cement ,fixing the reinforcement bars as per design, fixing the m.s. channel form work in perfect level, laying the concrete, compacting with surface vibrator, maintaining the water/cement ratio with controlled Vaccum dewatering system, broadcasting/spreading floor hardener granules of approved make as per manufactures specification . Broad casting/ spreading shall be done evenly and in two phases and directions as directed by the manufacturer, power trowelling, finishing the surface smooth icluding cutting the grooves 6mm wide x 40mm deep with groove cutting machine, filling the grooves with fine sand 20mm at bottom and top portion of 20mm with approved quality neoprene mastic including watering, curing, cleaning etc.complete as directed by Engineer in Charge(Steel reinforcement steel shall be measured and paid under respective item). The rate shall includes cost and conveyance of all materials,labour charges,lead,lift ,all taxes, cleaning and clearing the debris from all levels and disposing, providing & laying 500 micron thick polythene sheet etc complete as directed by engineer in charge at all levels .All works covered by this specification shall be carried by an experienced agency having sufficient experience in Vaccum dewatering concrete system.Only skilled and experienced persons shall be employed for purpose.
2916.05
-
-
... More
4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
119.8
-
-
... More
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
53.46
-
-
... More
CEILING WORK
-
-
-
... More
12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
2448
-
-
... More
FINISHING WORK
-
-
-
... More
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
22521.68
-
-
... More
13.10 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
4505.81
-
-
... More
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
12072.2
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
25410.91
-
-
... More
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
9905.88
-
-
... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
23330.91
-
-
... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
625
-
-
... More
22.7.1 : Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer - in- Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm
978
-
-
... More
od46099/2017_2018 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge.
4419.42
-
-
... More
od46102/2017_2018 : Providing and fixing Multi wood Jally using Multi wood board of 18mm thickincluding CNC cut with PU paint finish as per approved design. The grill board shall be fixed to MS frame work with suitable screws as per the direction of Engineer-in-charge ( Steel frame work shall be paid in relevant item) . The rate Including, cost and conveyance of all materials, labour charges, lead,lift,scaffolding, CNC cutting etc complete as directed by Engineer in Charge at all levels.
5943
-
-
... More
od46104/2017_2018 : Providing and applying aliphatic acrylic based deckguard primer or equivalent at the rate of 2.5sqm per liter over the exterior plastered surface and finishing with clear coating of deckguard-S or equivalent at the rate of 3 sqm per liter in two coats to achieve a dry film thickness of 175micron.The rate shall include the cost and conveyance of all materials and labour required for the necessary surface preparation of the plastered surface ,crack treatment,material application as per manufactures specifications and as per the direction of Engineer in Charge at all levels
9905
-
-
... More
ROOFING WORK
-
-
-
... More
od46085/2017_2018 : Providing and Fixing Multi cell/tight cell polycarbonate sheet Panel System with16mm thick (minimum) single panel as per drawing . The weight of the panel shall be 3250 gram per square meter. Panel Width shall not be less than 1040mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. The panels shall be uniform in color with an integral Tight-Cell core. In a cross section, the core shall be constructed of tight cells not to exceed 4mm x 4mm. Panels shall be manufactured with Vertical Standing Seam at both sides of the panel. Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability. Panels shall be secured with snap-on connectors with / without continuous double wall Aluminium spacer along the standing seam. Panel shall be factory sealed/end welded panels with additional End-cap/Aluminium U-Profile (mill finish) for ends. Panels shall be co-extruded UV protected. Panel shall be co-extruded with special anti glare compound to make it anti-glare/soft light to prevent glare and sun streaks. All aluminium sections to have recycled content of 15-30%.VLT>50% SHGC 0.27The rate shall includes ,cost and conveyance of all materials,Handling of machineries and electrical charges etc. labour charges,lead,lift etc. complete as per technical specification and as directed by the Engineer in charge at all levels .The above work shall be carried out by an agency having sufficient experience in concerned work and should ensure a guarantee for any defective installation,material composition and water and weather tightness for a period of 10 years from the date of completion of the said work .only skilled and experienced persons shall be employed for this purpose.
326
-
-
... More
od46091/2017_2018 : Design, Supply and Installation of Fixed glass panels (with 12 mm thick toughened clear coated glass ) for entrance area including approved top and bottom aluminium rail with built-in lock at the bottom, glass wall to wall connector, over head connector etc. as per manufacturer specification. Aluminium rails shall be approved by architect before procurement. Aluminium rails shall be satin SS finish with inbuilt glass locking mechanism. The glass shutter should be polished on the edges. The above work shall be done as per manufacturer specification , approved drawings and as directed by Engineer-in-Charge / architect. 12mm thick toughned glass should be heat soaked. The rate shall be inclusive of cost of all materials, transportation, loading - unloading charges, lead, lift, labour charges and all taxes, cleaning and clearing the debris from all levels and disposing etc complete, as specified by the Engineer-In-Charge.
436.05
-
-
... More
MISCELLANEOUS WORKS
-
-
-
... More
od46086/2017_2018 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate (contentration by weight percent 0.075) for pre-constructional treatment and creating a chemical barrier conforming to IS 6313 (Part II latest) for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete as per manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
4121
-
-
... More
SANITARY INSTALLATION
-
-
-
... More
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
144
-
-
... More
17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.
73
-
-
... More
17.5.1 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
46
-
-
... More
17.32.4 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
33
-
-
... More
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
23
-
-
... More
od46140/2017_2018 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
121
-
-
... More
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
73
-
-
... More
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
75
-
-
... More
od46142/2017_2018 : Providing and fixing coloured vitreous china counter top round wash basin 470 mm or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve, etc. complete as directed by the Engineer-in-charge. (The purchase price considered for washbasin is Rs.1580, pillar cock is Rs.1100,bottle trap is Rs 1050,angle valve is Rs 550 and any deviation plus or minus in the purchase price will be adjusted in the price quoted).
83
-
-
... More
od46145/2017_2018 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-charge at all levels. 110mm Dia
21
-
-
... More
od46147/2017_2018 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-charge at all levels. 75mm Dia
21
-
-
... More
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
192
-
-
... More
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
162
-
-
... More
50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
156
-
-
... More
50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
282
-
-
... More
50.18.9.18.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
78
-
-
... More
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
342
-
-
... More
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
612
-
-
... More
od46149/2017_2018 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 200 mm dia 6 Kgf/cm2
282
-
-
... More
19.4.3.1 : Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:180x150 mm size P typeWith common burnt clay F.P.S (non modular) bricks of class designation 7.5
7
-
-
... More
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
-
... More
19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
4
-
-
... More
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
8
-
-
... More
od46153/2017_2018 : Providing and fixing sanitary fixtures for handicaped toilet including one wash basin of size 65 x 35cm, one pair mounting brackets,one number pillar cock & all other related fittings like bottle trap ,angle cock,waste coupling etc,one number EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76cm & 5 nos. of grab rails 60cm etc designed for people with special needs comes with as per manufactures specification including cutting and making good the walls and floors wherever required as per drawing and as directed by Engineer in charge.
1
-
-
... More
WATER SUPPLY
-
-
-
... More
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
6
-
-
... More
50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
6
-
-
... More
50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
390
-
-
... More
50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2
348
-
-
... More
50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2
198
-
-
... More
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
6
-
-
... More
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
12
-
-
... More
50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall
78
-
-
... More
50.18.7.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
30
-
-
... More
50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
6
-
-
... More
50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
48
-
-
... More
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
6
-
-
... More
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
48
-
-
... More
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
6
-
-
... More
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
48
-
-
... More
18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes
18
-
-
... More
od46150/2017_2018 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 62.50 mm inner dia pipes
54
-
-
... More
od46151/2017_2018 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 80mm nominal dia
162
-
-
... More
od46152/2017_2018 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 100mm nominal dia
186
-
-
... More
od46155/2017_2018 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63mm dia 10 Kfg/cm - Internal work- Exposed on wall
48
-
-
... More
od46156/2017_2018 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75mm dia 10 Kfg/cm - Internal work- Exposed on wall
30
-
-
... More
od46157/2017_2018 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes&; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90 mm dia 10 Kfg/cm - Internal work- Exposed on wall
54
-
-
... More
od46158/2017_2018 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110mm dia 10 Kfg/cm - Internal work- Exposed on wall
36
-
-
... More
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
11
-
-
... More
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore
5
-
-
... More
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
11
-
-
... More
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
11
-
-
... More
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore
7
-
-
... More
18.17.6 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore
4
-
-
... More
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
22
-
-
... More
18.31.1.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameter Class II
5
-
-
... More
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal bore Horizontal
2
-
-
... More
18.19.6.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal bore Horizontal
1
-
-
... More
od46159/2017_2018 : Providing and fixing CI non-return valve of approved quality: 100 mm nominal bore Horizontal
1
-
-
... More
od46160/2017_2018 : Providing and fixing GM Foot valve of approved quality: 50 mm nominal bore Horizontal
4
-
-
... More
od46161/2017_2018 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 100mm Dia
2
-
-
... More
od46162/2017_2018 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 80mm Dia
1
-
-
... More
od46163/2017_2018 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. 100mm Dia
2
-
-
... More
od46164/2017_2018 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. 80mm Dia
2
-
-
... More
od46165/2017_2018 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. 65mm Dia
2
-
-
... More
od46166/2017_2018 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 200mm Dia
2
-
-
... More
od46167/2017_2018 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 200mm Dia
2
-
-
... More
od46168/2017_2018 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 150mm Dia
4
-
-
... More
od46169/2017_2018 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge. 150mm Dia
1
-
-
... More
SEPTIC TANK 150 USERS- 2 Nos
-
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
421.2
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
184.68
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
210.6
-
-
... More
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
319.6
-
-
... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4.2
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
22.83
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
23.92
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
349.3
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
74.8
-
-
... More
od45956/2017_2018 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.
6672.24
-
-
... More
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
0.34
-
-
... More
od45954/2017_2018 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Minimum Cement content shall be @ 330 kg/ cum. All work upto plinth level
66.93
-
-
... More
od45955/2017_2018 : Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Minimum Cement content for M-30 grade shall be 340 kg/cum).
66.93
-
-
... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
19.2
-
-
... More
od40895/2017_2018 : 15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm over roof at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
255.36
-
-
... More
od40896/2017_2018 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)
255.36
-
-
... More
od40897/2017_2018 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
149.39
-
-
... More
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
132
-
-
... More
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
4
-
-
... More
19.32.1 : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
SUMP 150 Cum
-
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
344.78
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
269.01
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
156.72
-
-
... More
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
144.62
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
9.89
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
14.4
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
208.8
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
82.88
-
-
... More
od45957/2017_2018 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.
6022.32
-
-
... More
od45958/2017_2018 : Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Minimum Cement content for M-30 grade shall be 340 kg/cum).
62.23
-
-
... More
od45959/2017_2018 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Minimum Cement content shall be @ 330 kg/ cum. All work upto plinth level
62.23
-
-
... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
4.8
-
-
... More
od41169/2017_2018 : 15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm over roof at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.
187.2
-
-
... More
od41175/2017_2018 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating which shall be mixed as per manufacture's technical specification in sunken slab, etc after thoroughly cleaning the surface by making it free of any loose mortar,unsound substrate,, filling the joints of slab/wall on the external face with CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers , cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.)
187.2
-
-
... More
od41171/2017_2018 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
67.11
-
-
... More
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
96
-
-
... More
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
2
-
-
... More
od45976/2017_2018 : Providing and Iaying PVC membrane waterproofing system over the vertical side for retaining wall. Installing geotextile of 300gsm as correction layer, over the vertical side of the wall, before installation PVC membrane 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent on vertical side, providing and fixing suitable arrangement for fixing mechanically onto the vertical wall to hold the membrane in vertical position against sagging due to self weight of the membrane and without damaging the PVC membrane and providing and Installing 2mm thick synthetic membrane of plasticized PVC with double seam welding of PVC waterproofing membrane joints and pressure testing of the same to 2 bars up to 10 minutes and with compartmentalization by welding PVC water stop with welding fins at all construction joints and at strategic locations to make a compartment of 200 sqmtrs pre installed with required number of injection flanges in every compartment fitted with inlet / outlet pipe and surface access box. The cost shall include the cost for providing and Installing a minimum protection layer of 300gsm or 25mm thick EPS protection boards over the vertically installed PVC waterproofing membrane, on the vertical face of the retaining wall to act as a protection layer against backfill and all pressure release mechanism etc complete as directed by the Engineer In Charge.
90
-
-
... More
od45977/2017_2018 : Providing and laying PVC membrane waterproofing system in horizontal plane including adjustment layer to take up any surface irregularities of the substrate, in order to avoid any imperfections or foreign particles damaging the waterproof layer. It shalll composed of geotextile, weight of 300 g/m2, laid in dry conditions with edge overlap of 10/15 cm. Synthetic membrane of plasticized PVC, 2mm thick of approved manufactor shall conform to the physical and chemical properties such as: Elongation at break (300%) UNI EN ISO 527-3 or equivalent, Ultimate Tensile Strength (> 16.7 N/mm²), Puncture resistance (> 1100mm) DIN 16726-5.12 or equivalent, Hydrostatic pressure Waterproof UNI EN 1928 resistance (6 hours at 5 bar) or equivalent. Double seam welding of PVC waterproofing membrane joints pressure tested to 2 bars of 10 minutes the waterproofing project to be divided into sectors if required and it is composed of shaped joints of PVC and it is welded to the existing waterproof liner. The rate shall be inclusive of providing and laying protection layer of non-woven 300gsm geo-textile membrane over the laid PVC waterproof membrane system, followed by a cement mortar screed of 50mm thick over the top layer of geo-textile membrane to facilitate the placing and tying of reinforcement bars of raft and all pressure release mechanism etc complete as directed by the Engineer-In-Charge.
117.28
-
-
... More
PART B - ELECTRICAL WORKS
-
-
-
... More
HT EQUIPMENTS- RMU Supply, Installation Testing and Commissioning of 11KV electrically Operated 21kA for 3 sec, 630A SF6 Insulated,Ring Main Unit indoor type with 2 nos motorized Load Break Switch as incomer and 1 no motorized VCB (fully rated earth switch) with fully encapsulated vacuum interrupter panel, 630 Amp continously rated Cu busbar complete with all accessories, protective relays, indicators, Hooter ,battery and battery charger, Manometer for indicating SF6 gas pressure with green zone marked on the scale,provision for padlocking for open, close, earth and test position etc. on a suitable foundation. The RMU must be extensible type and compatible for SCADA system .The rate quoted shall be inclusive of all the civil works . Refer technical specification and drawing for details.
1
-
-
... More
1600 KVA 11kV Packaged Substation
Design, fabrication, supply, installation, testing and commissioning of indoor type Packaged (Unitized) Substation enclosure consisting of 11 KV, 800A, 25kA for 3 sec motorized VCB with fully encapsulated vacuum interrupter panel , 1600 kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP23 enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping & indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift, necessary civil works for RCC foundation etc. complete as per single line diagram & technical specification.
HT Compartment
11KV, 25kA for 3 sec, 800A motorized VCB, 800 Amp continously rated Cu busbar
Self powered microprocessor based three over current and one earthfault relay with protection CT's - 1 set
Battery and battery charger - 1 set
Manometer for indicating SF6 gas pressure with green zone marked on the scale
Provision for padlocking for open, close, earth and test position
Transformer Compartment
1600 kVA, 11kV/433V 3 Ph, 50Hz, dry type, vector Dyn -11 Transformer, copper wound, Class F insulation, indoor distribution Transformer with forced ventilation. Losses shall be as per ECBC guidlines. The transformer shall have Delta on HV side and Star on LV side with off load tap changer range: + 5% to -10% in steps of 2.5%. The transformer shall have suitable enclosure for providing neutral CT of 500/5A 15VA 5P10 on earthed star point with connector for connection Earth Fault relay in HT/LT panel.
LT Chamber: Suitable for terminating 2000A busduct
1
-
-
... More
625kVA DG SET Supply, Installation, Testing and Commissioning of indoor type 625KVA (or higher) prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 625 KVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500RPM, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank , fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Pollution control board standards.
2
-
-
... More
LT PANEL BOARDS- DG SYNC PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 1: 1000A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs, DG synchronising relay as indicated in Single Line Diagram - 1 set
Incomer 2: 1000A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs, DG synchronising relay as indicated in Single Line Diagram - 1 set
Instruments: (0 to 500)V Voltmeter for 3 phase, 4 wire operation with selector switch-2 set, 3 nos of (0-1000)A ammeter for 3 phase, 4 wire operation-2 set, 1000/5A 15VA class 1 resin cast CT-2 set, digital Multi function meters-2 set, LED indication lamps etc as required complete as per Single Line Diagram.
Busbar: 2500A TPN busbar chamber with Aluminium busbar Outgoings: 2500A, TPN 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae, with CTs Multifunnction meters, 4 A SP C Curve MCBs as indicated in Single Line Diagram - 1 set
The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
MSB PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer -1 and 2: 2500A, TPN, 50kA, EDO, ACB with Microprocessor based release with OL & SC protection - 2 No, AMF relay-1 No
Instruments : 4A, C curve SP MCB - 6 Nos., 4A, C curve SP MCB - 6 Nos, RYB indication lamp, LED type - 2 set, (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 2 set, (0-2500)A ammeter Acc. class 1 with 90 deg defl. scale - 6 Nos, 2500/5A 15VA class 1 resin cast CT -6nos, 2500/5A 15VA class 1 resin cast CT - For IPFC relay, Digital power analyser/meter (V,A,F,PF,KW,KVA,KWH, THD, Harmonic Current, Harmonic Voltage) having RS 485 communication facilities - 2Nos, ON/OFF/TRIP indication lamp, LED type - 6 Nos
Busbar : 2500A TPN busbar chamber with Aluminium busbar
Out goings: 1250A, TPN, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 2 Nos, 1000A, TPN, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 1 No, 800A, TPN, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 1 No, 400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -3nos, SMF battery with suitable battery charger (suitable for providing minimum 8hours back up for AMF relay),The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
A/C PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer:1250A, FP, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 1 No
Busbar: 1250 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos, RYB indication lamp, LED type - 3 Nos,(0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, (0-1250)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set, 1250/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings:800A, TPN, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 1 No
400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos
125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -4 nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
UTILITY PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer:800 A FP SDU-1 No
Busbar: 800 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, 3 nos of (0-800)A ammeter for 3 phase, 4 wire operation - 1 set, 800/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings: 400A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos, 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 no, 200A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos, 160A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 nos, The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
LIFT PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 200A FP SDU-1 No
Busbar: 200A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, (0-200)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set, 200/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings: 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -8 Nos, The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
LIGHTING SB
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 160 A FP SDU-1 No, Busbar: 160 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, 3 nos of (0-160)A ammeter for 3 phase, 4 wire operation - 1 set, 160/5A 15VA class 1 resin cast CT - 3nos,Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no, Outgoings: 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -6 Nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
POWER SB
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 160 A FP SDU-1 No, Busbar: 160 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, 3 nos of (0-160)A ammeter for 3 phase, 4 wire operation - 1 set, 160/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings: 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -9 Nos The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
UPS PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 400 A FP SDU-1 No, Busbar: 400 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, 3 nos of (0-400)A ammeter for 3 phase, 4 wire operation - 1 set, 400/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no, Outgoings: 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos, 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -4 Nos, 40A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 NosThe panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
POWER LAB PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 400 A FP SDU-1 No
Busbar: 400 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, 3 nos of (0-400)A ammeter for 3 phase, 4 wire operation - 1 set, 400/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no Outgoings: 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -10 Nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
VRF PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 800A, FP 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae - 1 set
Busbar: 800 A TPN busbar chamber with Aluminium busbar Meters:4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, (0-800)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set, 800/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings: 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos, 125A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -3 Nos, 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos, 63A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -2 Nos
The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
AHU PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer: 400A FP Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos
Busbar: 400 A TPN busbar chamber with Aluminium busbar Meters: 4A, C curve SP MCB - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, (0-400)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set, 400/5A 15VA class 1 resin cast CT - 3nos, Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no, Outgoings: 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -7 Nos The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
1
-
-
... More
Pump panel - 1
Supply, Installation, Testing & Commissioning of LT Panel cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP 42, free standing, indoor, floor mounting, dust and vermin proof, compartmentalised, suitable for operation on 3 phase, 415 V, 50Hz AC system with busbars extendable on both sides, including internal wiring with suitable size wires/cable, interconnection, duly powder coated etc., including supply & installation of following switchgears, metering instruments and accessories in the LT Panel and as per specifications.
Incomer: 400A, FP SDU- 1 no.
BUSBARS: 400 Amp TPN busbars of high conductivity electrolytic quality aluminium conductor
INSTRUMENTS: Voltmeter (0 to 500 V) for 3 phase, 4 wire operation with selector switch and 3 Nos. control MCBs -1 Set, Ammeter (0 to 400A) with selector switch and 3 nos 400/5A CT's, 15VA, Class 1for 3phase, 4 wire operation -1 Set, RYB phase indicating lamps, LED type -1 Set, Outgoing: 250A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos, 100A TP+NL Moulded Case Circuit Breaker with thermal release and neutral link (Ics =100%Icu= 25KA) -1 Nos, 10A TP 100kA MPCB - 2 nos, 2.5A TP 100kA MPCB - 4 nos, On/Off indication lamp, LED type for out goings - 4 set, 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary &power contactors for 3 HP motor - 2 nos., 3 phase DOL starter with on/off push button,thermal overload relay, single phasing preventer and auxillary &power contactors for 0.5 HP motor - 2 nos. Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, thermal overload relay, single phasing preventer and auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets.
1
-
-
... More
440kVAR CAPACITOR PANEL
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer:1000A, FP, 50kA, EDO, ACB with Thermal Magnetic based release with OL & SC protection - 1 No, 4A, C curve SP MCB - 3 nos., RYB indication lamp, LED type - 3 nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 no., (0-1000)A ammeter Acc. class 1 with90 deg defl. scale - 1 no., 6A 3 pole voltmeter selector switch - 1 no., 6A 3 pole ammeter selector switch - 1 no., 1000/5A 15VA class 1 resin cast CT - 3nos, 1000A TPN busbar chamber with Aluminium busbar., Microprocessor based intelligent, 10 step IPFC relay with PF display - 1 No.,Auto / manual selector switch - 1 nos. Out Going: 125 A, 36kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 8 nos., 63A, 36kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 2 nos., 32A, 36kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 2 nos., 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 8 Nos., 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No., 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No., 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 1 No., 50 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 8 Nos, 25 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 Nos, 10 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 Nos, 5 kVAr,480 V,50 Hz heavy duty capacitor(MPP-H) with 7 % Seriesreactor - 1 No
1
-
-
... More
UPS AND ACCESSORIES
Supply , Installation, Testing and Commissioning of 40 kVA, three phase input, three Phase output, true on-line UPS system with 30 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit andone set of battery bank. Fully digital controlled based on DSP
Power factor corrected from end 0.9
Pure sine wave output.
Full time output voltage & frequency regulation
Auto regulation of battery end voltage
Intelligent interface with LED/LCD display
Static bypass switch / manual by pass switch
Auto temperature compensation
4
-
-
... More
Supply , Installation, Testing and Commissioning of 20 kVA, three phase input, three Phase output, true on-line UPS system with 30 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit andone set of battery bank. Fully digital controlled based on DSP
Power factor corrected from end 0.9
Pure sine wave output.
Auto regulation of battery end voltage
Intelligent interface with LED/LCD display
Static bypass switch / manual by pass switch
Auto temperature compensation
1
-
-
... More
TPN SANDWICH BUS DUCT
Supply, Installation, Testing and Commissioning of Indoor type, Sandwich TPN with 100% neutral Bus duct, 415V, 50 kA, 50Hz AC supply, suitable for indoor installation of following Ampere capacity made out of Aluminium alloy enclosure IP 54 with powder coating painting, aluminium bus bar with suitable RYBN colour coded heat shrinkable sleeve, bus bar supports, proper supporting arrangement with metal suspenders/ brackets etc., flexible end termination and complete with fittings & accessories like elbows, offset sections, tees, reducers, adaptor boxes, flanges, flexible connections & expansion joints, ground strips, and earthing with continual integral/internal earth busbar or provision for running 2nos, 25x6mm Cu earth strip along with bus duct etc. as required. (The rate shall be quoted for running meter and the length of elbows, bends, adaptor box, supports also measured under running meter and the rate inclusivce all assosiated accessories and extra claim shall not be entertrained).
-
-
-
... More
1000 A TPN Sandwich Bus duct
10
-
-
... More
1250 A TPN Sandwich Bus duct
20
-
-
... More
2500 A TPN Sandwich Bus duct
40
-
-
... More
HT CABLING
Supply of following sizes of XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.
3C X 300sq.mm.
196
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 120 sq. mm and upto 400 sq. mm
164
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
Above 120 sq. mm and upto 400 sq. mm
5
-
-
... More
Laying of one no. PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in recess/ surface/ cable tray/ wall with saddles, clamps and all other accessories as required Above 120 sq. mm and upto 400 sq. mm
27
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required
3C X300 sq.mm.
1
-
-
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required
3C X300 sq.mm.
1
-
-
... More
Supplying and making straight through cable jointing with cast resin compound, including ferrule and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
3C X300sq.mm.
1
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
... More
3.5C 400Sq.mm Al
729
-
-
... More
3.5C 240 Sq.mm Al
719
-
-
... More
3.5C 185 Sq.mm Al
66
-
-
... More
3.5C 120 Sq.mm Al
337
-
-
... More
3.5C 70 Sq.mm Al
139
-
-
... More
3.5C 35 Sq.mm Al
1910
-
-
... More
4C 25 Sq.mm Al
160
-
-
... More
4C 16 Sq.mm Al
1210
-
-
... More
4C 10 Sq.mm Al
28
-
-
... More
4C 6 Sq.mm Al
162
-
-
... More
4C 4 Sq.mm Al
614
-
-
... More
3C 4sqmm Al
215
-
-
... More
3C 6sqmm Al
72
-
-
... More
3C 16sqmm Al
143
-
-
... More
2C 4sqmm Al
247
-
-
... More
2C 6sqmm Al
10
-
-
... More
4C 2.5sqmm Cu
429
-
-
... More
3C 4sqmm Submersible
240
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3.5C 400Sq.mm Al
34
-
-
... More
3.5C 240 Sq.mm Al
22
-
-
... More
3.5C 185 Sq.mm Al
6
-
-
... More
3.5C 120 Sq.mm Al
6
-
-
... More
3.5C 70 Sq.mm Al
8
-
-
... More
3.5C 35 Sq.mm Al
62
-
-
... More
4C 25 Sq.mm Al
10
-
-
... More
4C 16 Sq.mm Al
74
-
-
... More
4C 10 Sq.mm Al
4
-
-
... More
4C 6 Sq.mm Al
18
-
-
... More
4C 4 Sq.mm Al
38
-
-
... More
3C 4sqmm Al
12
-
-
... More
3C 6sqmm Al
4
-
-
... More
3C 16sqmm Al
8
-
-
... More
2C 4 Sq.mm Al
26
-
-
... More
2C 6 Sq.mm Al
2
-
-
... More
4C 2.5sqmm Cu
24
-
-
... More
3C 4sqmm Submersible
24
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall or surface as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
616
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
93
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
294
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
425
-
-
... More
Laying of one number PVC insulated and PVC sheathed armoured power cable of 1.1kV grade fo the following sizes in ground including excavation ,sand cushioning , providing protective covering and refilling the trench etc. as required
-
-
-
... More
Upto 35 sq. mm
233
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
179
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq. mm
159
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
40
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Upto 35 sq. mm
178
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
4004
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
46
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
109
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
804
-
-
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
... More
50 mm
50
-
-
... More
100 mm
50
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100 mm dia
10
-
-
... More
Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
-
-
-
... More
150 MM WIDTH X 50 MM DEPTH X 2 MM THICK
30
-
-
... More
300 MM WIDTH X 50 MM DEPTH X 2 MM THICK
30
-
-
... More
600 MM WIDTH X 50 MM DEPTH X 2 MM THICK
20
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
300
-
-
... More
300 mm width X 62.5 mm depth X 2.0 mm thickness
300
-
-
... More
600 mm width X 50 mm depth X 2.0 mm thickness
120
-
-
... More
Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
1000
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
15
-
-
... More
Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.
19
-
-
... More
WIRING AND ACCESSORIES
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Total distance from switch board to first point will not exceed 5 metres.
902
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(With Medium range Switches-Make: MK Blenz or equivalent approved make)Total distance from point to point point will not exceed 5 metres, incase if the length exceeds 5 metres.
12
-
-
... More
Group controlled wiring for light point (from point to point) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit and earthing the point with 1.5 sq.mm. FRLSH PVC insulated copper conductor single core cable etc as required.This item does not include the cost of MCB, 6/16A switches.Total distance from point to point will not exceed 5 metres.
371
-
-
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
5407
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
24175
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
7587
-
-
... More
Supplying and fixing following modular switch/ socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
-
-
-
... More
25A DP modular switch
10
-
-
... More
25A DP modular socket
10
-
-
... More
Bell push
12
-
-
... More
15/16 amp switch
50
-
-
... More
6 pin 15/16 amp socket outlet
50
-
-
... More
TV antenna socket outlet
10
-
-
... More
Telephone Socket
19
-
-
... More
Supplying and fixing stepped type electronic fan regulator with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
160
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
12
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
218
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
561
-
-
... More
Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)
594
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
300
-
-
... More
25 mm
300
-
-
... More
32 mm
300
-
-
... More
Supply of UPVC cable management system of size 105mmx50mm including all accessories such as plastic trunking 105mmx 50mm, flexible cover, base joint, end cap, flat angles, flat junctions, external angles etc as required complete.
300
-
-
... More
Laying of UPVC cable management system on surface/wall of size 105mmx50mm including all accessories such as flexible cover, base joint, end cap, flat angles, flat junctions, external angles etc as required complete.
300
-
-
... More
Supply of UPVC cable management system of size 80mmx50mm including all accessories such as plastic trunking 80mmx 50mm, flexible cover, base joint, end cap, flat angles, flat junctions, external angles etc as required complete.
300
-
-
... More
Laying of UPVC cable management system on surface/wall of size 80mmx50mm including all accessories such as flexible cover, base joint, end cap, flat angles, flat junctions, external angles etc as required complete.
300
-
-
... More
MCBs AND MCB DISTRIBUTION BOARDS
Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 125/160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 Way TP
5
-
-
... More
6 Way TP
4
-
-
... More
8 Way TP
1
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way Double door
6
-
-
... More
8 way Double door
13
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door
34
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
12 way, Double door
1
-
-
... More
6 way, Double door
2
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
100Amp,16KA,FPMCCB
1
-
-
... More
125Amp,16KA,FPMCCB
9
-
-
... More
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
-
-
-
... More
2 pole 25 amps. (230 Volts),30mA sensitivity.
1
-
-
... More
4 pole 25 amps. (415 Volts),30mA sensitivity.
12
-
-
... More
4 pole 25 amps. (415 Volts),100mA sensitivity.
1
-
-
... More
4 pole 40 amps. (415 Volts),100mA sensitivity.
7
-
-
... More
4 pole 40 amps. (415 Volts),30mA sensitivity.
2
-
-
... More
4 pole 63 amps. (415 Volts),30mA sensitivity.
5
-
-
... More
4 pole 63 amps. (415 Volts),100mA sensitivity.
29
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
125 A isolator
4
-
-
... More
Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required.
-
-
-
... More
6A to 32A, SP, C-CURVE
452
-
-
... More
6A to 32A ,SP D CURVE
288
-
-
... More
6 A to 32 A TP MCB, C-CURVE
74
-
-
... More
40 A to 63A TP MCB, C-CURVE
72
-
-
... More
Supply, Installation, Testing & Commissioning of 32A DP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
15
-
-
... More
Supply, Installation, Testing & Commissioning of 32A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
31
-
-
... More
Supply, Installation, Testing & Commissioning of 40A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
2
-
-
... More
Supply, Installation, Testing & Commissioning of 63A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
4
-
-
... More
Supply, Installation, Testing & Commissioning of 63A FP isolator in weather proof enclosure on surface including all the mounting accessories, internal wiring etc as required complete.
4
-
-
... More
Supply, Installation, Testing & Commissioning of 100A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
2
-
-
... More
Supply, Installation, Testing & Commissioning of 125A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
2
-
-
... More
Supply, Installation, Testing & Commissioning of 200A FP SDU in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
2
-
-
... More
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
20
-
-
... More
Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
12
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
50
-
-
... More
LIGHT FIXTURES AND FANS
Supply of indoor industrial surface mounted LED tube and batten along with driver , surge protector,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1800lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watt and including all necessary accessories as required complete.Make:- Cat No Wipro WIO921208 + 1 Nos. of 18W LED Tube Light or Crompton Greaves IGP131LT8-16+LT8-16
65
-
-
... More
Supply of indoor surface mounted LED tube with Batten along with driver , surge protector,,system wattage of 40+/-4 Watts(2x20 watts),lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro WIO922208 + 2 Nos. of 18W LED Tube Light or Crompton Greaves IGP132LT8-16+LT8-16
140
-
-
... More
Supply of indoor industrial surface mounted LED tube with Batten along with driver , surge protector,,system wattage of 40+/-4 Watts, lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro WIO832208 + 2 Nos. of 18W LED Tube Light
20
-
-
... More
Supply of indoor decorative surface mounted LED Batten with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection,along with driver,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1800, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Philips BN021C LED20S PSU NW GR or Wipro LL20-221-XXX-65NE1 or Crompton Greaves DMLN1LT16+LT16
49
-
-
... More
Supply of indoor decorative surface mounted LED Batten with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection,along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 800, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Philips BN021C LED20S PSU NW GR or Wipro LL20-121-XXX-65NE or Crompton Greaves DMLN1LT16+LT8
73
-
-
... More
Supply of 2x2 LED recess mounted fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 33+/-3 Watts,lumen output of lamp greater than 3000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 100 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Philips RC380B LED-34s or Wipro CRC010R038HP57 or Crompton Greaves LCTLRN-36-FO-CDL
204
-
-
... More
Supply of 2x2 surface mounted LED fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 33+/-3 Watts,lumen output of lamp greater than 3000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 100 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Wipro CRCO10S038HP57G1 or equivalent approved makes
205
-
-
... More
Supply of 2x2 LED clean room fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 60+/-3 Watts,lumen output of lamp greater than 5000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Diffuser shall be sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing. Fixture should be IP20 grade integral luminaire. Make Wipro LC20-721-XXX-57-XX or equivalent approved make
27
-
-
... More
Supply of LED midbay with high pressure die cast aluminium housing,along with driver,system wattage maximum of 70 +/- 10 Watts,lumen output of lamp greater than 6300 lumens, power factor 0.9,rated life of L70 @ 40,000 hours. system efficacy greater than 90 lumen/watts including all necessary accessories as required complete.Make:- LT Transformer 70W or equivalent approved make
4
-
-
... More
Supply of LED midbay with high pressure die cast aluminium housing,along with driver,system wattage maximum of 125 +/- 10 Watts,lumen output of lamp greater than 11200 lumens, power factor 0.9,rated life of L70 @ 40,000 hours. system efficacy greater than 90 lumen/watts including all necessary accessories as required complete.Make:- LT Transformer 125W or equivalent approved make
2
-
-
... More
Supply of LED recess mounted down light made of die cast aluminium, along with driver,system wattage of 15+/-3 Watts,lumen output of lamp greater than 1200 lumens, power factor 0.9, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Philips DN192 or Wipro CRDL11R017HP57 or Crompton Greaves LCDSPLN-R-12-CDL
121
-
-
... More
Supply of high efficient surface mounted square downlighter made of die cast aluminium along with driver,system wattage of 15+/-3 Watts,lumen output of lamp greater than 1000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours system efficacy greater than 90 lumen/watt ,wth suitable driver and including all necessary accessories as required complete.Make:- Cat No: Philips BBS175 1xDLED or Wipro CRDL11S017HP57 or Osram AURIO SQUARE Down Light or Crompton Greaves LSDD-15-CDL
185
-
-
... More
Supply, installation, testing and commissioning of flood light luminaire with die cast aluminium housing with powder coated finish, with suitable driver,system wattage 100+/-10Watts,lumen output of lamp greater than 8000 lumens, power factor 0.9, rated life of L70 @ 50,000 hours, IP 65 compliant including all necessary accessories as required complete. Make :- Cat number Wipro LF20-122-XXX-57-XX or equivalent approved make
20
-
-
... More
Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-High Speedor equivalent approved make).
160
-
-
... More
Supply of 400 mm size wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.(Make crompton-SDX white or equivalent approved make).
5
-
-
... More
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make)
21
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
717
-
-
... More
Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required.
121
-
-
... More
Installation, testing and commissioning of LED fittings with chain and copper wiring - Installation testing and commissioning of prewired fluorescent fittings of all types including LED complete with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.
204
-
-
... More
Installation, testing and commissioning of High bay/LED/ T5 FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
20
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
160
-
-
... More
Installation, testing and commissioning of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing & commissioning etc as required.
21
-
-
... More
Installation, testing and commissioning of Wall fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
5
-
-
... More
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
1311
-
-
... More
EARTHING AND SAFETY EQUIPMENTS
Supply,installation ,testing and comissioning of maintenance free earthing using 4 mtrs length,20mm dia 250 microns molecularly copper bonded steel rod, stainless stell connectors and fasteners for connecting earth strip.The earth electrode shall be filled with earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx 300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.
27
-
-
... More
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
-
-
-
... More
50 mm X 6mm GI
20
-
-
... More
32mm X 6mm GI
10
-
-
... More
25mm X 6mm GI
105
-
-
... More
25mm X 3mm Cu
25
-
-
... More
3.15mm Cu (10 SWG)
1700
-
-
... More
4mm GI (8 SWG)
20
-
-
... More
6 SWG Cu
60
-
-
... More
2 SWG Cu
70
-
-
... More
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
... More
50 mm X 6mm GI
20
-
-
... More
32mm X 6mm GI
10
-
-
... More
25mm X 6mm GI
120
-
-
... More
25mm X 3mm Cu
25
-
-
... More
3.15mm Cu (10 SWG)
2609
-
-
... More
4mm GI (8 SWG)
20
-
-
... More
6 SWG Cu
21
-
-
... More
2 SWG Cu
30
-
-
... More
Supply and providing ISI marked electrical 3.3 kV grade anti-skid rubber mat as per IS:15652.forthe following sizes.
-
-
-
... More
2mx1mx2mm thick
3
-
-
... More
2mx1mx2.5mm thick
2
-
-
... More
Supply and fixing of First aid box
1
-
-
... More
Supplying of Rubber hand gloves suitable for 11 KV.
1
-
-
... More
Supply and fixing anodised aluminum glass framed shock treatment chart.
1
-
-
... More
Supply and fixing single line diagram, schematic diagrams etc. of A0 size on suitable Aluminium sheet including lamination etc. as required complete on wall.
1
-
-
... More
Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.
1
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
... More
LIGHTNING PROTECTION
Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for parapet wall/terrace with the required mounting clamps, cross connectors , expansion piece and other accessories required as per IEC 62305-3
2228
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3
284
-
-
... More
Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x 3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm.
16
-
-
... More
Providing and laying hot dipped galvanized steel tape 30 mm X3 mm from earth electrode directly in ground as required.
640
-
-
... More
VRF SYSTEM
Supply, installation ,testing & commissioning of following minimum capacities of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut out, with ODU vibration isolators, suitable for 3 phase, 415 V, 50Hz supply, starter panel, power wiring from starter panel, necessary power/control panel, power& control cabling between isolator and single/multiple outdoor units along with associated accessories, structural supports /RCC/ cement concrete foundation etc. complete in all respects as per the technical specifications.
(single feeder power source will be provided for 86HPX 2 No.s, 26HP,18HP outdoor units by client )
-
-
-
... More
86HP
2
-
-
... More
26 HP
1
-
-
... More
18HP
1
-
-
... More
Supply, Installation ,testing and commissioning of indoor evaporative units Cassette type with cordless remote, of following minimum capacities suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, drain connection with U-trap and all necessary fittings, elbows, electrical cabling from power plug, structural supports etc. complete in all respects as per the technical specifications.
-
-
-
... More
3.0 TR
2
-
-
... More
2.0 TR
2
-
-
... More
1TR
10
-
-
... More
Supply, Installation , testing and commissioning of ceiling suspended indoor ductable units with all standard fittings(including AHU Kit if required ) , outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with cordless remotes, power wiring, suitable capacity drive motor, electrical controller, temperature controller with digital display, thermostat, control wiring, complete with necessary vibration isolators, CPVC drain pipe connections with U-trap along with necessary elbows, fittings etc., power/control cabling from power supply, etc complete in all respects as per the technical specifications.
-
-
-
... More
5.5 TR
1
-
-
... More
8.5TR
17
-
-
... More
Supply, installation, testing and commissioning of Gas/ Liquid Copper Piping with nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating , suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing,drilling,concealing and making good the same on walls etc of following specifications as per site conditions and with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc.Complete in all respects as per the technical specifications.
NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items.Both refrigerant suction and liquid line shall be insulated.
-
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/4")
75
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 5/8")
40
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/2")
50
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/8")
60
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/4")
50
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/8")
40
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 7/8")
60
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/4")
40
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 5/8")
60
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/2")
60
-
-
... More
Soft Copper Pipe 20Guage with 13mm thick Insulation ( 3/8")
180
-
-
... More
Soft Copper Pipe 20Guage with 13mm thick Insulation ( 1/4")
140
-
-
... More
Supply, installation, testing and commissioning (SITC) of 11 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, charging of gas, vibration isolator pads, structural supports for fixing IDU/ ODU, safety devices including thermal protector, pressure relief valve, over load relays single phase preventer, earth connections etc, power wiring(from isolator), control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for single/three phase 230V/440V supply etc. complete in all respects as per the technical specifications.
4
-
-
... More
Supply, installation, testing and commissioning (SITC) of 8.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, charging of gas, vibration isolator pads, structural supports for fixing IDU/ ODU, safety devices including thermal protector, pressure relief valve, over load relays single phase preventer, earth connections etc, power wiring(from isolator), control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for single/three phase 230V/440V supply inclusive of all taxes etc. complete in all respects as per the technical specifications.
4
-
-
... More
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating as per specification for 11 TR machine between indoor & each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing, drilling, concealing and making good the same on walls etc as per site conditions inclusive of all taxes etc. complete in all respects as per the technical specifications.
60
-
-
... More
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating as per specification for 8.5 TR machine between indoor & each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing, drilling, concealing and making good the same on walls etc as per site conditions inclusive of all taxes etc. complete in all respects as per the technical specifications.
60
-
-
... More
Supply, installation, testing and commissioning of CPVC drain pipe of suitable dia connecting the drain pan of the indoor units with necessary U-traps, elbows, fittings etc. to nearest drain point, with 9 mm thick closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating inclusive of all taxes etc. complete in all respects as per the technical specifications.
350
-
-
... More
Supply of central controller, along with associated accessories for controlling entire VRF system with suitable interconnecting control cabling between IDUs,ODUs and central controlller , Power wiring with necessary supports and complete in all respects as per the technical specifications.
1
-
-
... More
Air distribution system
Supply, installation, testing and commissioning of factory fabricated machine made GSS sheet metal ducting complete with neoprene gaskets, elbows, splitter dampers, vanes, hangers, supports etc. for Supply air, Return air, Exhaust Air, Fresh Air as per ducting specifications and with suitable supports using MS angles, channels, rods, anchor bolts, etc to roof /truss as per IS 655 / SMACNA standards , inclusive of all taxes and complete in all respects as per the technical specifications.
-
-
-
... More
20G
200
-
-
... More
22 G
450
-
-
... More
24 G
950
-
-
... More
Supply, fixing, testing and balancing of Powder coated extruded aluminimum Supply Air Square Diffusers, 4 way multicone type with aluminium volume control dampers, fixing supports inclusive of all taxes etc. complete in all respects as per the technical specifications.
15
-
-
... More
Supply, fixing, testing and balancing of Powder coated extruded aluminimum Return Air Square Diffusers 4 way multicone type , fixing supports inclusive of all taxes etc. complete in all respects as per the technical specifications.
15
-
-
... More
Supply, fixing testing and balancing of Supply air grilles of extruded aluminium duly powder coated with aluminium volume control damper, fixing supports inclusive of all taxes etc. complete in all respects as per the technical specifications.
17
-
-
... More
Supply, fixing, testing and balancing of Return air grilles of extruded aluminium duly powder coated without damper, fixing supports inclusive of all taxes etc. complete in all respects as per the technical specifications.
17
-
-
... More
Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc. inclusive of all taxes etc. complete in all respects as per the technical specifications.
5
-
-
... More
Supply ,fixing and balancing of Powder coated extruded Exhaust air louvers complete in all respects as per the technical specifications.
5
-
-
... More
Supply,fixing, testing and balancing of opposed type volume control dampers of 16 gauge GI sheets to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distributions system inclusive of all taxes etc. complete in all respects as per the technical specifications.
12
-
-
... More
Supply, Installation ,testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for air distribution Networks , inclusive of all taxes etc complete in all respects as per the technical specifications.
8
-
-
... More
Supply and fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1,having density 140 kg/m3 insulation using manufacturers recommended adhesive, tapes etc and applications.Quoted price shall be inclusive of adhesive, tapes, Complete in all respects as per technical specifications.
140
-
-
... More
Supplying and fixing of 25 mmhick 55kg/m3 density, regular closed cell nitrile rubber insulation with anti-microbial protection, factory laminated aluminium foil facing, finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating on the entire ducts surfaces including flanges.Butt all joints tightly and seal all breaks and joints of insulation using a 75 mm wide reinforced aluminium tape,complete in all respects as required by the technical specifications.
1600
-
-
... More
Class 10000 with Air Handling Unit and AC for Clean Room
Design, supply, installation, testing and commissioning of suitable capacity Air Conditioner: with Air cooled AC condensing Unit for Class 10000 Clean room with 148.8 sqmtr area with scroll/rotary compressor duly commissioned with Copper Piping, N2 pressure testing, gas charging etc -1 set. 2. FAHU: Double skin, 25mm puf panels made of pre-coated sheets with aluminium sectional frames, Provision for fixing Motor–blower, cooling coil of suitable capacity , pre-filters, fresh air arrangement etc. to achieve Class 10000 cleanliness Motor-Blower: High Static blower , with heavy duty Motor, drive package etc. (suitable cfm) – 100% Fresh Air EAHU: Double skin, 25mm puf panels made of pre-coated sheets with aluminium sectional frames, Provision for fixing Motor–blower & HEPA Filter. Motor-Blower: High Static blower, with heavy duty Motor, drive package etc. Capacity: suitable cfm to achieve Class 10000 conditions -. 1 set 3. Ducting: 24G Aluminium duct for supply and return air of required Sq.Ft 4. Thermal Insulation: with 13mm & 9mm thick nitrile foam for Supply & Return Air ducts of required SqFt. 5. Volume control duct Dampers: GI Lot 6. Aluminium Grilles / Diffusers Lot 7. Filters: HEPA filters –Made of 100% micro-fibre glass to filter 0.3µ and larger particles at 99.97% efficiency installed in the AHU to match the AHU capacity – in Rooms & EAHU Pre-Filters – for particles in the range of 20 microns & 5 microns - non-woven fabric, cleanable media with aluminium support mesh to match AHU capacity -Lot 8. Electrical Work: from your main switch to the condensing unit and the AHU with control wiring, Auto-Control Panel incl drive & sensors, UPS for back-up for 15min – 1 No. Lot 9. Installation & commissioning- Lot 10. Clean Room Validation – Particle Count, HEPA Integrity test & Air Capacity measurement -Lot 11. Room Pressure Indicator for the Clean room area & Temperature Indicator 1 No. 1 Set
1
-
-
... More
Clean Room Interior work
Supply, installation, testing and commissioning of Modular Clean Room False ceiling:Suspended False Ceiling with 60mm thick double skin modular ceiling panel system made of 0.5mm thick GI powder coated sheets on both sides with PUF of density 40Kg/m3 as infill. 1st quality GI having 1200mm width with required length, consisting 'T' bar suspension type of frame work made with extruded GI perimeter channels and 3mm thick 1"x1" square tube extruded GI runners, suspended with 6mm dia G.I Rods from existing RCC slab. Rate shall include necessary cutouts for air supply & luminaires complete with edge finishing. Silicon sealant shall be used at the joints ,Complete in all repsects as per technical specifications
3160
-
-
... More
Supply, installation, testing and commissioning of Aluminium curved sections to rounf off 90deg joints between wall-wall,wall-floor,wall-ceiling Complete in all respects as per technical specification.
1244
-
-
... More
Supply, installation, testing and commissioning of Corner Covings:
355
-
-
... More
Supply, installation, testing and commissioning of Clean Room Hinged Doors : Metallic with double glazed View panel of size 450 x 750mm; door closer, SS handle etc Size: 1.15m X 2.1m.Complete in all respects as per technical specification
3
-
-
... More
Supply, installation, testing and commissioning of Epoxy flooring : Self leveling , seamless floor with suitable surface preparation of 2mm total thickness. Complete in all respects as per technical specification
1762
-
-
... More
Supply, installation, testing and commissioning of Lighting fixtures :Clean Room light fittings with Modular switches in wall panels Size: 24” x 12” .Complete in all respects as per technical specification
90
-
-
... More
Supply, installation, testing and commissioning of Door Interlocking for Change Room Doors Complete in all respects as per technical specification.
1
-
-
... More
FIRE HYDRANT AND SPRINKLER SYSTEM Supply, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification. (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 1620 lpm at 80m head, conforming to IS 1520. (b)Suitable HP and RPM, Sqiurrel cage induction motor, TEFC, synchronous speed for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
-
... More
Supply, Installation, Testing and Commissioning of diesel engine driven stand by fire pump suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification. (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 1620 lpm at 80 m head conforming to IS 1520. (b)Suitable HP and RPM water cooled diesel engine with radiator conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
-
... More
Supply, Installation, Testing and Commissioning of electric driven pressurisation pump (Jockey Pump ) suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification. (a) Horizontal, centrifugal end suction type pump of cast iron body and stainless steel impeller with stainless steel shaft, mechanical seal and having a flow of 180 lpm at 80m head conforming to IS 1520 (b)Suitable HP and RPM Sqiurrel cage induction motor, TEFC, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation as required duly plastered with anti vibration pads.
1
-
-
... More
Supply, installation, testing and commissioning of pressure guage 0-200 PSI ( 0 - 14 Kg ) range, 1/2" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube and suitable size ball valve including fittings etc. complete in all respect as required as per the technical specification.
3
-
-
... More
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required complete in all respect as required as per the technical specification.
3
-
-
... More
Supply of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required, complete in all respect as required as per the technical specification.
1
-
-
... More
Supply, Installation, Testing and Commissioning of MS (Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required in all respect and as per the technical specification.
-
-
-
... More
150mm dia
208
-
-
... More
100mm dia
196
-
-
... More
80mm dia
146
-
-
... More
65mm dia
31
-
-
... More
50mm dia
57
-
-
... More
40mm dia
32
-
-
... More
32mm dia
6
-
-
... More
25mm dia
571
-
-
... More
Supply, Installation, Testing and Commissioning of MS (Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards, in ground at a minimum depth of 1 meter, including excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating min 4mm thickness as per IS10221, refilling the trench with compaction etc. of following sizes complete as required in all respect and as per the technical specification.
-
-
-
... More
150mm dia
659
-
-
... More
80 mm dia
28
-
-
... More
Supply, installation, testing and commissioning of dual plate non-return valve PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required as per the technical specification.
-
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
1
-
-
... More
65 mm dia
1
-
-
... More
50 mm dia
3
-
-
... More
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required in all respect and as per the technical specification.
-
-
-
... More
150 mm dia
12
-
-
... More
100 mm dia
3
-
-
... More
65 mm dia
1
-
-
... More
50 mm dia
4
-
-
... More
40 mm dia
3
-
-
... More
Supply, installation, testing and commissioning of swing type Foot valve with CI body, strainer of following size confirming to IS specifications complete with gaskets, seal and accessories complete as required in all respect and as per the technical specification.
-
-
-
... More
150 mm dia
2
-
-
... More
80 mm dia
1
-
-
... More
Supply, installation, testing and commissioning of priming tank of capacity 1500 lit. made of HDPE material with outlet/ inlet connection using suitable size ball valve, water level indicator, over flow arrangement etc. complete as required in all respect and as per the technical specification.
1
-
-
... More
Supply, installation, testing and commissioning of gun metal fire hydrant valve, single headed oblique type 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to IS:5290 complete with blank cap chain, etc complete in all respect and as per the technical specification.
33
-
-
... More
Supply, installation, testing and commissioning of first-aid hose reel with MS construction spray painted in post office red, conforming to IS 884 with up to date amendments, complete in all respect and as per the technical specification.with the following as required.
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585
(b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with suitable dia stop valve (gun metal)
22
-
-
... More
Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. long RRL hose pipe conforming to IS 636 (type-A) with 63 mm dia male and female gun metal couplings etc. complete as required in all respect and as per the technical specification.. (Note: The rate shall include cost of necessary supports for placing the hoses inside the shaft)
66
-
-
... More
Supply, installation, testing and commissioning of 63 mm dia gun metal branch pipe with 20 mm (nominal internal diameter) size gun metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling etc. complete as required in all respect and as per the technical specification.
33
-
-
... More
Supply, installation, testing and commissioning of hose box pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications. The pedestal shall be made of suitable channel with MS supports and mounted on a PCC foundation on the ground.
33
-
-
... More
Supply, installation, testing and commissioning of 4 way fire brigade collective breaching with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia flanged out let connection and built in check valves complete in all respects as required by the standard specifications.
4
-
-
... More
Supply, installation, testing and commissioning of 25mm air release valve with all the necessary accessories complete as required in all respect and as per the technical specification.
4
-
-
... More
Supply, installation, testing and commissioning of sprinkler head, Standard response, standard coverage upright sprinkler ;1/2" NPT, K-5.6, Chrome Finish; operating temperature at 68 deg. C. complete as required in all respect and as per the technical specification.
189
-
-
... More
Supply, Installation, Testing and Commissioning of 100mm dia Sprinkler alarm valve of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete as required in all respect and as per the technical specification.
3
-
-
... More
PORTABLE FIRE EXTINGUISHERS
Supply and installation of ISI marked ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket and as per the technical specification.
27
-
-
... More
Supply and installation of ISI marked Carbon-dioxide extinguisher of 4.5 Kg capacity made of high pressure seamless steel cylinder complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas, complete and as required as per the technical specification.
5
-
-
... More
Supply and installation of ISI marked Clean agent type fire extinguisher of 4kg capacity. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket and as required as per the technical specification.
2
-
-
... More
FIRE DETECTION AND ALARM SYSTEM
Supply, installation, testing and commissioning of addressable type/conventional with addressable module 24v Power supply unit for hooters with battery backup. The status of the power supply unit must be monitored from the FACP and alarm shall be obtained if the power supply unit fails to operate.The product must be UL listed and FM approved, complete in all respect and as required as per the technical specification.
4
-
-
... More
Supply and laying of 2x 1.5sq.mm copper armoured FRLSZH cable ISI marked with proper clamping, supports and terminations,complete in all respect and as required as per the technical specification.
1914
-
-
... More
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/ saddles/ screws, in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required as per the technical specification
120
-
-
... More
Supply, installation, testing and commissioning of Conventional type Manual Call Point Resettable type via Special Key interconnecting to loop cable as required,complete in all respect and as required as per the technical specification
24
-
-
... More
Supply, installation, testing and commissioning of conventional type Hooter with a minimum sound level of 80db at 10ft distance, interconnecting to loop cable complete as required as per the technical specification
24
-
-
... More
Supply, installation, testing and commissioning of Conventional Type 12 zone manual operated Fire Alarm Panel including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module etc.The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit, etc complete in all respects and as required as per the technical specification. The item shall include 24 Volts sealed lead acid battery sufficient for 24 hrs back up with battery charger.
1
-
-
... More
Supply, installation, testing and commissioning of Loop isolator modules to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable complete as required as per the technical specification. The product must be UL listed/FM approved.
3
-
-
... More
Supply, installation, testing and commissioning of public address and talk back system consisting of 6 zone public address cum talkback console with mike and selector. 6 channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA & mic, 6 channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.
1
-
-
... More
Supply, installation, testing and commissioning of wall mounted talk back unit including all necessary accessories complete as required as per the technical specification.
14
-
-
... More
Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required as per the technical specification.
16
-
-
... More
SIGNAGES
Supply and fixing of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification..
5
-
-
... More
Supply and installation of glow signage (photoluminescent)of "3M" Make such as Fire Lift/Fire duct/ Staircase signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
36
-
-
... More
Supply and installation of glow signage (photoluminescent)of "3M" Make such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc.complete as required as per the technical specification.
18
-
-
... More
Supply and installation of glow signage (photoluminescent)of "3M" Make "FIRE ASSEMBLY POINT" of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification. .
1
-
-
... More
Supply and installation of glow signage (photoluminescent)of "3M" Make such as FIRE ORDER signage of size 500*800 MM as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
5
-
-
... More
ELECTRICAL ITEMS- Main Fire Pump Panel
Supply of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with bus bars extendable on both sides, including all the necessary internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates (required for short circuit rating, temperature rise test and IP classification) with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. The panel shall be with top entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.
INCOMER: 320A, FP, SDU - 1 No.
INSTRUMENTS: (0 to 500 )V analogue type Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set, (0 to 320A) analogue type ammeter for 3 phase, 4 wire operation with selector switch - 1 set, Phase indicating lamps, LED type, RYB - 1 Set, ON, OFF, Trip indicating lamps, LED type, RYB with 3 nos. control SP MCB - 1 Set
320/5A, Class 1.0, 15VA, Cast Resin CT for metering - 1 Set, BUSBARS:320 Amp TPN bus bars of high conductivity electrolytic quality Aluminium alloy
OUTGOING: Electrical Fire Pump, 120A, TP, SDFU with Copper Link - 1 Nos. Star Delta starter of suitable rating for 415V, 50Hz, 3 phase for main electrical fire pump(approx. 45 kW) with kW in accordance with the main electric pump. The starter shall have ON, OFF push button, ON, OFF indication lamp complete with all accessories and internal wiring required for automatic and manual operation as required. - 1 No's Jockey Pump- 1 No, 35A, TP, SDFU with Copper Link - 1 No.
Star Delta starter of suitable rating for 415V, 50Hz, 3 phase Jockey pump (approx. 11 kW). The starter shall have ON, OFF push button, ON, OFF, Trip LED indication lamp, thermal over load relay, single phase preventer, complete with all accessories and internal wiring required for automatic and manual operation - 1 No , 63A, TP+NL, SDFU with Copper Link for battery charger - 1 No. Spare: 120A, TP+NL, SDFU with suitable rating Copper Link 1 No. , 35A, TP+NL, SDFU with suitable rating Copper Link - 2 No., Diesel Engine Control - 1 No., Each Diesel engine control consisting of: 25A DP C curve control MCB, 25A On/off control switch - 2 No., Auto / manual selector switch, 3 attempt starting device, push button etc., All required timers, relays, fuses and accessories for automatic operation of diesel engine. Indication lamp for high water temperature, engine fail to start, engine On indication, high/low lube oil pressure.
Necessary control wiring for start / stop solenoid, line / oil pressure switch, temperature switch, pressure switch to fire pump panel, diesel engine control panel to fire pump panel etc.
Battery Charger suitable for 12 V / 24 V DC with boost and trickle selector switch, 0 -15 V / 0 - 30 V DC volt meter, 0 - 20 A DC Ammeter - 02 No.,
6 panel annunciation window for fault indication with hooter, accept & reset push button, separate hooter for Diesel /electrical pump on running condition - 1 No, The system shall include all accessories to control the operation of main electric pump, diesel pump, jockey pump as per the operating sequence for the fire fighting system indicated in the technical specification. The battery charger and all its components should be housed inside the main fire pump pane The Scope of works also includes LT power & control cabling including the GI ladder type cable tray & necessary MS supports
1
-
-
... More
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
... More
3.5C 240 Sq.mm Al
288
-
-
... More
3C 50 Sq.mm Al
17
-
-
... More
3.5 C 35 Sq.mm Al
17
-
-
... More
3C 10 Sqmm Al
17
-
-
... More
4C 2.5 Sq mm Cu
35
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3.5C 240 Sq.mm Al
2
-
-
... More
3C 50 Sq.mm Al
2
-
-
... More
3.5 C 35 Sq.mm Al
2
-
-
... More
3C 10 Sqmm Al
2
-
-
... More
4C 2.5 Sq mm Cu
2
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 185 sq. mm and upto 400 sq. mm
260
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
69
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 25x3mm MS flat clamp)
15
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
15
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
15
-
-
... More
Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
2
-
-
... More
EARTHING Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
-
-
-
... More
50x6 GI Strip
15
-
-
... More
25x6 GI Strip
10
-
-
... More
4 SWG Cu
5
-
-
... More
10 SWG Cu
25
-
-
... More
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
... More
50x6 GI Strip
10
-
-
... More
25x6 GI Strip
10
-
-
... More
4 SWG Cu
5
-
-
... More
10 SWG Cu
5
-
-
... More
Supply of Elevator
Design, fabrication, supply of electric traction type with machine roomless type , Stainless steel 10 Pax passenger elevator (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, duplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up toPurcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.The traction motor of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre opening stainless steel door with stainless steel frame work, stainless steel car enclosure provided with stainless steel handrails on two sides, granite flooring as applicable in accordance of following details:-5 stops & 5 openings and entrance & exit at opposite side and 15.60 m travel height. (Shaft Size 2000mm (width) x 2100mm (depth) ) with door opening of 700mm (width) and 2000 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in the Machine room .All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
... More
Design, fabrication, supply of electric traction type with machine roomless type , Stainless steel 10 Pax passenger elevator (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, duplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up toPurcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.The traction motor of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre opening stainless steel door with stainless steel frame work, stainless steel car enclosure provided with stainless steel handrails on two sides, granite flooring as applicable in accordance of following details:-6 stops & 6 openings and entrance & exit at same side and 22.35 m travel height. (Shaft Size 2000mm (width) x 2100mm (depth) ) with door opening of 700mm (width) and 2000 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in the Machine room .All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
... More
Design, fabrication, supply of electric traction type with machine roomless type , Stainless steel 10 Pax passenger elevator (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, duplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up toPurcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.The traction motor of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre opening stainless steel door with stainless steel frame work, stainless steel car enclosure provided with stainless steel handrails on two sides, granite flooring as applicable in accordance of following details:-5 stops & 5 openings and entrance & exit at same side and 18.30m travel height. (Shaft Size 2000mm (width) x 2100mm (depth) ) with door opening of 700mm (width) and 2000 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in the Machine room .All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
... More
Installation, Testing and Commissioning of Elevator
Installation ,Testing and Commisioning of 10 Passeneger Stainless steel Elevator with stainless steel door with stainless steel frame work to suit the shaft size and also to provide adequate structural steel supports,as required for the safe operation of the equipment. All procedures should conform to relevant standards and as per technical specification.
2
-
-
... More
Installation ,Testing and Commisioning of 10 Passeneger Stainless steel Elevator with stainless steel door with stainless steel frame work to suit the shaft size and also to provide adequate structural steel supports,as required for the safe operation of the equipment. All procedures should conform to relevant standards and as per technical specification.
2
-
-
... More
Installation ,Testing and Commisioning of 10 Passeneger Stainless steel Elevator with stainless steel door with stainless steel frame work to suit the shaft size and also to provide adequate structural steel supports,as required for the safe operation of the equipment. All procedures should conform to relevant standards and as per technical specification.
2
-
-
... More
PART D -ELV SYSTEM
DATA & VOICE
Supply of U/UTP cable - Category 6 , 4 pair, 23 AWG solid copper conductor, 600 MHz, CMR, FRLSZH - with all accessoreis required as per specification
24750
-
-
... More
Supply of 25mm PVC conduit along with accessories as per the specification
12108.4
-
-
... More
Fixing of 25mm PVC conduit including all necessary accessories including recessing and making good the surface as required
12108.4
-
-
... More
Supply of PVC cable channel 45mmx 45mm as per specification.
200
-
-
... More
Fixing of PVC cable channel 45mmx45mm including all necessary accessories in the surface as required
200
-
-
... More
Laying, testing and commission of following type of cable with Fluke DTX 1800 Cable Analyser through existing conduits in surface including termination, numbering tags ,Cable ties, Ferrules and all accessoreis required as per specification
a. CAT 6 U/UTP .
20000
-
-
... More
Laying, testing and commission of following type of cable with Fluke DTX 1800 Cable Analyser through existing conduits in recess including wall chasing and making good as applicable including termination, numbering tags ,Cable ties, Ferrules and all accessoreis required as per specification
a. CAT 6 U/UTP .
4750
-
-
... More
Supply of 32mm HDPE Pipe with ISI marked of class B medium with all accessories required as per specification
400
-
-
... More
Laying of 32mm HDPE Pipe with ISI marked of class B medium including excavation, cutting and refilling with all accessoroes required as required as per specification
400
-
-
... More
Supply of 50mm GI pipe ISI mark of class B medium with all accessories required as per specification
25
-
-
... More
Laying of 50mm GI pipe ISI mark of class B medium with all accessories including excavation, cutting and refilling required as per specification
25
-
-
... More
Supply of 12 Core Fiber Optic Cable, Single mode Outdoor with all accessories required as per specification
400
-
-
... More
Laying, testing and commissioning of 12 Core Fiber Optic Cable, Outdoor through exisiting 32mm HDPE pipe including termination with all accessories required as per specification
400
-
-
... More
Supply of 12 port Rack mount Fiber enclosure LIU , Loaded (with single mode adapters / Couplers / Splice Tray / Splice holder) with all accessiries required as per specification
1
-
-
... More
Installation , testing and commissioning of 12 port Rack mount Fiber enclosure LIU , Loaded (with adapters / Couplers / Splice Tray / Splice holder) with all accessiries required as per specification
1
-
-
... More
Supply of SC Pigtail SM with all accessiries required as per specification
12
-
-
... More
Splicing, testing and commissioning of SC Pigtail SM with all accessiries required as per specification
12
-
-
... More
Supply of SM SC-LC Duplex Patch Cord, 3 meters with all accessiries required as per specification
8
-
-
... More
Installation of SM SC-LC Duplex Patch Cord, 3 meters with all accessiries required as per specification
8
-
-
... More
Supply of Riser Cable Category 3, 50 Pairs with all accessories required as per specification
200
-
-
... More
Laying ,testing and commissioning of Riser Cable Category 3, 50 Pairs with all accessories required as per specification
200
-
-
... More
Supply of Wall mount MDF - Connection capacity of 100+100 pairs with all accessories (IDC, Label holder, spacer Earth clip, protection component) required as per specification
1
-
-
... More
Installation, testing and commissioning of Wall mount MDF - Connection capacity of 100+100 pairs with all accessories (IDC, Label holder, spacer Earth clip, protection component) required as per specification
1
-
-
... More
Supply of CAT6 Information Outlet for Data/Voice, RJ 45 with all accessories required in complete as per specification.
707
-
-
... More
Laying of CAT6 Information Outlet for Data/Voice, RJ 45 with all accessories required including termination complete as per specification.
707
-
-
... More
Supply of Metal Back Box for CAT 6 information outlet as per specification.
30
-
-
... More
Installation of Metal Back Box in recess for CAT 6 information outlet as per specification.
30
-
-
... More
Supply of PVC Back Box for CAT 6 information outlet as per specification.
375
-
-
... More
Installation of PVC Back Box for CAT 6 information outlet on the Surface/wall as per specification.
375
-
-
... More
Supply of Dual Shuttered Face Plate with all accessories required as per specification.
355
-
-
... More
Installation of Dual Shuttered Face Plate with all accessories required as per specification.
355
-
-
... More
Supply of Single Shuttered Face Plate with all accessories required as per specification
20
-
-
... More
Installation of Single Shuttered Face Plate with all accessories required as per specification
20
-
-
... More
Supply of Analog Telephone Instrument as per specification.
54
-
-
... More
Installation, Testing and Commisssioning of Analog Telephone Instrument as per specification.
54
-
-
... More
Supply of Standard IP Phones as per the technical specification with necessary Accessories as per specification.
5
-
-
... More
Installation, testing and commissioning of Standard IP Phones as per the technical specification with necessary Accessories as per specification.
5
-
-
... More
Supply of UTP Patch Cords Category 6- with all accessories required as per specification.
a. 1m Patch cord
707
-
-
... More
Installation, Testing and Commissioning of CAT6 UTP Patch Cords with end terminaiton for both data and voice with all accessories including termination, numbering tags ,Cable ties, Ferrules and all accessoreis required as per specification
a. 1m Patch cord
707
-
-
... More
Supply of CAT6 24 port patch panel with shutter fully loaded as required in complete as per specification
28
-
-
... More
Installation, testing and commissioning of cat6 24 port patch panel with shutter fully loaded, including termination, etc. as required complete as per specification
28
-
-
... More
Supply of CAT6 24 port voice patch panel with shutter fully loaded, including termination as required complete as per specification
5
-
-
... More
Installation, testing and commissioning of 24 port voice patch panel with shutter fully loaded, including termination as required complete as per specification
5
-
-
... More
Supply of Server/Networking Rack - 42U ,800 X 1000 MM with Vertical cable manger double sided , Cooling fan, power supply , cable manager,hardware screws with all accessiries required at site as per specification
1
-
-
... More
Installation, Testing and commissioning of Server Rack - 42RU Cooling fan, power supply , cable manager,hardware screws with all accessiries required at site as per specification
1
-
-
... More
Supply of 27U 600 X1000mm Rack alongwith all necessary hardware & accessories, etc.complete as required at site as per specification.
1
-
-
... More
Installation,Testing and Commissioning of 27U Rack alongwith all necessary hardware & accessories, etc.complete as required as per specification.
1
-
-
... More
Supply of 9U wall mount 600x 550 MM Rack alongwith all necessary hardware & accessories, etc.complete as required as per specification.
4
-
-
... More
Installation,Testing and Commissioning of 9U Rack alongwith all necessary hardware & accessories, etc.complete as required as per specification.
4
-
-
... More
Supply and laying of 200mm perforated cable tray with all accessories as required as per site conditions
200
-
-
... More
Supply and laying of 100mm perforated cable tray with all accessories as required as per site conditions
200
-
-
... More
WIFI
Supply of WLAN AP(Access Point) with 4x4 MIMO, PoE Ethernet port, 4 internal antennas and 600Mbps Speed including Ceiling mount bracket with all accessories required.
7
-
-
... More
Installation of WLAN AP(Access Point) with 4x4 MIMO, PoE Ethernet port, 4 internal antennas and 600Mbps Speed including Ceiling mount bracket with all accessories required.
7
-
-
... More
Supply of Wifi Controller licensed for 20 Access Points. can be upgraded to support up to 75 APs with AP license upgrades
1
-
-
... More
Installation,testing and commissioning of Wifi Controller licensed for 20 Access Points. can be upgraded to support up to 75 APs with AP license upgrades
1
-
-
... More
PROJECTOR
Supply of factory crimbed 10m HDMI Cable as per specification.
23
-
-
... More
Installation,Testing and Commissioning of factory crimbed 10m HDMI Cable as per specification.
23
-
-
... More
Supply of factory crimbed 10m VGA Cable as per specification.
23
-
-
... More
Installation,Testing and Commissioning of factory crimbed 10m VGA HDMI Cable as per specification.
23
-
-
... More
CCTV
Supply of indoor dome IP camera , 1/3” 3Megapixel progressive CMOS, 20fps@3M (2048x1536) &25/30fps @1080P (1920×1080) , 802.3af Power-over-Ethernet (Class 2), focal length: 3.6mm , DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC, Max IR LEDs Length 30m with all required accessories as per specification
60
-
-
... More
Installation, testing and commissioning of IP camera , 1/3” 3Megapixel progressive CMOS, 20fps@3M(2048x1536)&25/30fps@1080P(1920×1080) , 802.3af Power-over-Ethernet (Class 2), focal length: 3.6mm ,DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC,Max IR LEDs Length 30m with all required accessories as per specification
60
-
-
... More
Supply of indoor bullet IP camera , 1/3” 3Megapixel progressive CMOS, 20fps@3M(2048x1536)&25/30fps@1080P(1920×1080) , 802.3af Power-over-Ethernet (Class 2), focal length: 3.6mm ,DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC,Max IR LEDs Length 30m with all required accessories as per specification
21
-
-
... More
Installation, testing and commissioning of indoor bullet IP camera , 1/3” 3Megapixel progressive CMOS, 20fps@3M (2048x1536) & 25/30fps@1080P (1920×1080) , 802.3 af Power-over-Ethernet (Class 2), focal length: 3.6mm , DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC,Max IR LEDs Length 30m with all required accessories as per specification
21
-
-
... More
Supply of 1080p HD PTZ Camera with 1/2.8" progressive scan CMOS, Effective pixels 1945 (H) x 1097 (V) (approximately 2.13M pixels), 30x Optical Zoom (4.5 mm–135 mm), 16X Digital Zoom, Minimum Illumination- Color: 0.05 Lux , B/W: 0.01 lux, 94dB WDR, H.265, H.264, MJPEG streams, Intelligent Dynamic Noise Reduction, BLC, White Balance, Pan Range 360° continuous, Tilt Range 0°±90°, Pan/Tilt Modes - Pan: 0.1°/s - 300°/s; Tilt: 0.1°/s - 200°/s, Presets 256, Tours, Audio- 1/1 Channel In/Out, Micro SD card support, 24 individually configurable privacy masks, Alarm inputs/outputs - 2/1, Dual Power options, Essential Video Analytics in-built, IP66 , IK10, ONVIF Profiles S & G, FCC, CE, UL Certified including all accessories required at site as per specification.
1
-
-
... More
Installation, testing and commissioning of 1080p HD PTZ Camera with 1/2.8" progressive scan CMOS, Effective pixels 1945 (H) x 1097 (V) (approximately 2.13M pixels), 30x Optical Zoom (4.5 mm–135 mm), 16X Digital Zoom, Minimum Illumination- Color: 0.05 Lux , B/W: 0.01 lux, 94dB WDR, H.265, H.264, MJPEG streams, Intelligent Dynamic Noise Reduction, BLC, White Balance, Pan Range 360° continuous, Tilt Range 0°±90°, Pan/Tilt Modes - Pan: 0.1°/s - 300°/s; Tilt: 0.1°/s - 200°/s, Presets 256, Tours, Audio- 1/1 Channel In/Out, Micro SD card support, 24 individually configurable privacy masks, Alarm inputs/outputs - 2/1, Dual Power options, Essential Video Analytics in-built, IP66 , IK10, ONVIF Profiles S & G, FCC, CE, UL Certified including all accessories required at site as per specification
1
-
-
... More
Supply of 32 Channel 1U 4K&H.265 Network Video Recorder with all accessories required as per specification
1
-
-
... More
Installation, testing and commissioning of 32 channel 1U 4K&H.265 Network Video Recorder with all accessories required as per specification
1
-
-
... More
Supply of AV 4 TB hard disc ( for Video Storage) as per specification.
5
-
-
... More
Installation, testing and commissioning of AV 4 TB hard disc ( for Video Storage) as per specification.
5
-
-
... More
BIOMETRIC
Supply of Biometric attendance machine with software etc. required including all accessories required at site as per specification.
2
-
-
... More
Installation, configuration, testing and commissioning of Biometric attendance machine including all accessories required at site as per specification.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%