Revenue And Forest Department Tender

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Appendix B - Fixed Squeeze Cage ( 9 nos)

od135107/2024_2025 : Manufacturing and fixing the sqeeze cage of size 250x140x130 cm using 60x60x6mm equal angle for outer frame, squeeze frame, lengthwise centre of squeeze, intermediate support of two lengthwise side of cage,vertical support 25mm dia MS bars 100mm centre to centre for cage & squeeze, top safety using 50x6mm Ms flat 150mm centre to centre both side .Bottom of the flat bars 19mm marine plywood platinum IS 710 and top covering 1.6 mm G.P sheet class II. Squeeze fixed in the cage such as Rack, Gear, Thrust bearing, Revolving roller, Shaft and nut with machining and one handle. Sliding doors on both side of the squeeze cage with a guiding shaft of size 32mm along with guiding bush and Tuflon wheels for easy operation of sliding doors. A small door size 150 x 150 mm is provided for <br>veterinary inspection. . All joints of MS angles Ms rods and flats are properly welded and grinding the same and two coats painting with Epoxy paint.

Manufacture and Installation of Squeeze Cage Portable size of 250x140x130 cm (4 Nos)

od135513/2024_2025 : Manufacturing and fixing the sqeeze cage of size 250x140x130 cm using 60x60x6mm equal angle for outer frame, squeeze frame,lengthwise centre of squeeze, intermediate support of two lengthwise side of cage. vertical support 25mm dia MS bars 100mm centre to centre for cage & squeeze, top safety using 50x6mm Ms flat 150mm centre to centre both side .Bottom of the flat bars 19mm<br> marine plywood platinum IS 710 and top covering 1.6 mm G.P sheet class II. Bottam of the cage provided 50 x 6 mm flat bars at 250 mm centre to centre and 19 mm marine plywood and then with 2 mm ms iron sheet with suitable nut and bolt. Squeeze fixed in the cage such as Rack, Gear, Thrust bearing, Revolving roller, Shaft and nut with machining and one handle. Sliding doors on both side of the<br> squeeze cage with a guiding shaft of size 32mm along with guiding bush and Tuflon wheels for easy opration of sliding doors. A small<br> door size 150 x 150 mm is provided for veterinary inspection. Providing and fixing Heavy duty 360 degree Rotating castor wheel with<br> break for easy movement of portable squeeze cage . All joints of MS angles Ms rods and flats are properly welded and grinding the same<br> and two coats painting with Epoxy paint.