Public Works Department Tender

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

90.14.28.2 : S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

od164159/2019_2020 : Supply and Fixing of 20/5, 30/5, 40/5 A, 5 VA Metering CT

od164149/2019_2020 : Suply & fixing the following multi-function meters in the panel assembly.Multifunction meter to read: V, A, F, 3 phase accuracy class 1

od164155/2019_2020 : LED indicators for all voltage ranges - Blue Colour

od164157/2019_2020 : LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

od164163/2019_2020 : Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables 1.50 sq mm single run with required sockets.conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.

od164165/2019_2020 : Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables 4 sq mm single run with required sockets.conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.

90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

od182255/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 25mm dia

od182257/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 65mm dia

od182259/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 80mm dia

od182261/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 100mm dia

od164359/2019_2020 : Supplying , fixing, testing and commissioning of ball valve ISI marked complete, conforming to IS 13095 of following sizes as required. 20mm

od164363/2019_2020 : Supplying , fixing, testing and commissioning of ball valve ISI marked complete, conforming to IS 13095 of following sizes as required. 25mm

od164361/2019_2020 : Supplying,installing,testing and commissioning Butterfly valve as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 100mm

od164367/2019_2020 : Providing, installation, testing and commissioning of non-return valve of following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. 100mm

od164267/2019_2020 : Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 © Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe ISI/EN Certificate.

od164269/2019_2020 : Supplying and fixing of hose cabinet fabricated from 2mm thick MS sheet with 6mm thick glazed front glass doors and looking arrangements suitable for accommodate internal accommodate of 2 no. of 15 Mtrs long hose pipe, 1 No. branch pipe, fittings etc. The cabinet shall be painted with one coat of primer and 2 coatts of synthetic enamel paint of post office red externally and white internally and shall be suitably mounted on concrete base.

od164271/2019_2020 : Providing and installation of 63 mm dia,15 Mtr long rubber lined woven jacketed hose pipe, type- A (Reinforced rubber lined) of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve / hose pipe / branch pipe with SS male & female couplings (IS:903:1993)

od164273/2019_2020 : Supplying and fixing single headed internal hydrant valve with instantaneous SS coupling of 63 mm dia with cast iron wheel, ISI marked, conforming to IS 5290 with blank cap and chain as required.

od164275/2019_2020 : Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F), phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.

od164277/2019_2020 : Supply and place in position of Gunmetal Branch pipe with 63mm female instanceous inlet, male,threaded outlet,complete with hexagonal base nozzle conforming to IS:903 with ISI mark.

od164279/2019_2020 : Supply, installation, testing and commissioning of 4 way Fire Brigade Inlet connection of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to wet riser main.

od164281/2019_2020 : Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia

od164283/2019_2020 : Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.

od164311/2019_2020 : Supply and fixing of ceiling mountable ABC Powder Based Standalone (Modular) Fire extinguisher with 68 degree temperature sensing bulb - 10Kg (Safex / Ceasefire / Kanex)

od164285/2019_2020 : Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5 kg. Capacity complete with installation brackets confming to IS15683 with ISI mark

od164287/2019_2020 : Supply and installation of ABC type fire extinguisher of 4 kg. Capacity complete with initial charges and installation brackets confming to IS15683 with ISI mark .

od164289/2019_2020 : Supplying,installing,testing and commissioning of Electronic dual tone Hooter(sounder) as per standard specification.

od164291/2019_2020 : Supplying,installing,testing and commissioning of Manual call point break glass type as per standard specification.

od164293/2019_2020 : Supply, installation, testing and commissioning of Control Panel of 4 Zone complete with charger, rectifier, alarm display with all other necessary attachments with Battery

od164899/2019_2020 : Supply, installation, testing and commissioning of smoke detector as required

od164295/2019_2020 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required. 2 core 1.50 sq mm using factory made saddles

od164299/2019_2020 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12''x4'' as required

od164303/2019_2020 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

od164907/2019_2020 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od164911/2019_2020 : Fee to be remitted to Fire &rescue service Department (actual amount incurred for the above items will be reimbursed on production of original documents)