Public Works Department Tender

12.53:Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection > 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity < 0.043 w/m 0 KC.

9.154:Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge.

OD186676/2024-2025:Supplying and fixing in position 12 mm century club prime marine plywood premium quality fixing with nesessary angles, screws etc required and fixing 1.5mm thick mica over the plywood surface area inside and outside top and bottom fixing by pressing gum and nail etc including cost of all materials and labour charges conveyance etc complete as per the direction of Engineer in charge

OD187433/2024-2025:Supplying and fixing in position 12 mm century club prime marine plywood premium quality, with CNC Design cut as per the Architects Design, fixing with necessary angles, screws etc required and fixing 1.5mm thick mica over the plywood surface area inside and outside top and bottom fixing by pressing gum and nail etc including cost of all materials and labour charges conveyance etc complete as per the direction of Engineer in charge

50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.81:Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

17.7.11:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Stainless Steel AISI - 304 (18/8) Wash basin 530 x 345 mm with single 15mm C.P. brass pillar tap

OD186557/2024-2025:Machine polishing two coats to old marble floor using carborundum stone including labour charges etc complete .As per the direction of engineering in charge.

OD186727/2024-2025:Providing and fixing zebra blinds on the window portion including all screws, brackets,child safety device, clips including supply and labour charges ect complete as per the direction of the Engineer in charge and as per the design approved.

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

OD186728/2024-2025:Supplying and sticking wall paper of approved design and pattern as per the direction of Architectural Engineer. etc complete

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

OD187399/2024-2025:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 2400x1200 mm

11.48.2:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

OD187818/2024-2025:Providing and fixing cp brass gratings including cost of materials, labour charge etc complete

OD187801/2024-2025:Providing and fixing premium Quality curtain cloth of approved quality (Price of Cloth shall not be less than Rs 400/m) with Curtain rod S.S 304 Grade 25 mm dia, with maximum spacing of stainless steel eyelets of 125mm apart ,wooden End cap with brackets (Cost shall not be less than Rs 400/Pair) including stitching charges supply and fixing the materials and labour charges etc complete as per the direction of Engineer in charge.

OD186558/2024-2025:Engaging coolie for various work

OD187431/2024-2025: Removing the waste cumulative materials from yard by 15km lorry conveyance

OD189084/2024-2025:Supplying fabricating and fixing brass empossed emblem of "Lokayutha Kerala" as per approved pattern and design of 50cm dia/nearest size including all cost of materails, labour, conveyance and all other incidental expenses etc complete, as per the direction of the departmental officers

OD189083/2024-2025:Fabricating, supplying and fixing Brass letters English or Malayalam to the wall paneling or name board with necessary fixing adhesives/ bolts ar per requirement to correct lines and levels including all cost of Materials,Labour, conveyance and all other incidental expenses etc complete as per the directiions of the departmental officers. Letters made of 0.8mm thick brass sheets having a heights of 12cm or nearest size having a projection of 25mm from the base