Public Works Department Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,270Tender Fee
Refer Documents
Summary
Deposit-renovation And Additional Works To District Planning Committee Secretariat, Palakkad -composite Work
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_686140_1Bid Award Id
ViewTender No
PWD/BLDG/4749/2024 -2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.kerala.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
14.85:Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
120.99
19643
162.36
... More
22.23A:Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
614
319464
520.3
... More
13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)
511.74
196497
383.98
... More
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
63.72
31144
488.77
... More
14.46:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
5363.54
114457
21.34
... More
13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1500.72
345300
230.09
... More
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
9646.68
677389
70.22
... More
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
7232.67
716250
99.03
... More
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
1757.23
205366
116.87
... More
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
721
67435
93.53
... More
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
43
75480
1755.35
... More
OD230984/2023-2024:Grouting the joints of flooring tiles having joints of 3mm width, using epoxy grout mix 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20kg of resin per kg ). Including filling/ grouting and finishing complete as per direction of Engineer - in - charge. Incorporated the required deduction for normal grouting with reference to DAR item spec 11.48.2
43
11590
269.54
... More
50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
1.16
9243
7947.88
... More
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.76
4295
312.16
... More
9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
40.8
32447
795.28
... More
OD216553/2023-2024:pressed steel door of standard pattern with frame as per profile of IS 4351 of section 105 x 60 mm using 18G (1.2 mm thick CRCA ) sheet and shutters made of section 75 x 30 cm for outer styles and horizontal members and then inserted with enclosed and stiffned sheet 26CR as per specification with Zincromate primer coat measured in square meter .
14.4
77270
5365.99
... More
9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
15.12
61287
4053.4
... More
22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
660
359455
544.63
... More
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50
19048
380.96
... More
50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall
30
11497
383.25
... More
50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
50
30330
606.6
... More
50.18.8.8.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
35
21700
620.01
... More
50.18.9.5.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2
39
9101
233.38
... More
50.18.9.11.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This included jointing of pipes & fittings with one step PVC solvent cement and testing of joints compete as per direction of Engineer-in-Charge 15 mm dia 12 Kgf/cm2-External work - Exposed on wall
30
7326
244.21
... More
50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
30
12561
418.72
... More
18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal bore
30
10617
353.91
... More
18.56.2:Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
10
2456
245.69
... More
18.57.1:Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms
10
1222
122.27
... More
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
20
12922
646.11
... More
50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
20
2147
107.36
... More
50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow
20
2635
131.75
... More
50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
25
32019
1280.78
... More
17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
5
16092
3218.45
... More
17.1.2:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:Stainless Steel AISI-304 (18/8) orissa pattern W.C. pan of size 585x 480 with flush pipe and integrated type foot rests
5
57534
11506.99
... More
17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
5
39100
7820.14
... More
50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
25
3205
128.22
... More
50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop
14
2401
171.55
... More
50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop
10
1889
188.97
... More
17.31:Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
20
30017
1500.89
... More
OD216554/2023-2024:Supplying and fixing Mosquito net
38.06
131179
3446.64
... More
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1267.78
212708
167.78
... More
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
8
5873
734.13
... More
50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
130
102716
790.13
... More
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
716.4
720182
1005.28
... More
21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
162
98520
608.15
... More
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
18.75
21925
1169.35
... More
21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness
23.82
40747
1710.64
... More
50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.
48
117617
2450.37
... More
26.23.1:Providing and fixing false ceiling at all heights with integral densified calcium
silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595
mm of approved texture, design and patterns having NRC (Noise Reduction
coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043
W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking
metal powder coated T-Grid of hot dipped galvanised iron section of
0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black),comprising of main-T runners of size 15x42
mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and
secondary intermediate cross-T of size 15x42 mm of length 600mm to form
grid module of size 600 x 600 mm, suspended from ceiling using galvanised
mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm
outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto
1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised
iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed
on periphery wall / partition with the help of plastic rawl plugs at 450 mm
center to center and 40mm long dry wall S.S screws. The work shall be carried
out as per specifications, drawing and as per directions of the Engineer-in-
Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
176
402038
2284.31
... More
10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
916.08
616677
673.17
... More
OD216555/2023-2024: Dorma (Aido) Xlc - 4131 Sensor Door Automatic Biparting, maximum opening 2000 mm , Zensafe sensor , Remote re included , 10 mm clear toughened glass
2
377719
188859.9
... More
OD216556/2023-2024:fixed glass portion attached to sensor door
119.04
387141
3252.2
... More
OD216557/2023-2024:Supplying and fixing stainless steel overhead water tank including all necessary fittings
20000
929200
46.46
... More
OD216558/2023-2024:For providing and fixing inaugural granite stone 12mm thick with carving / granting letters & emblems and fixed in walls with cement mortar 1:3 (1 cement:3 coarse sand) , including finishing complete, for various functions including all cost , conveyance, labor charges, etc. complete.
2.25
23624
10499.77
... More
OD216559/2023-2024:For Providing and Fixing D L P Board size 3x2(90x60)ACP Sheet with HD vinyl print letters and emblems and fixed in walls including all cost of fittings conveyance ,labour charges etc complete.
3
12250
4083.47
... More
8.9.1.2:Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade
34.06
116614
3423.81
... More
OD216560/2023-2024:Engaging Carpenter
10
11096
1109.67
... More
OD216561/2023-2024:Engaging scavenger
5
4936
987.28
... More
OD216562/2023-2024:Engaging Welder/ Fitter Gr-I
15
17325
1155.06
... More
OD216563/2023-2024:Engaging Coolie
37
32313
873.34
... More
APPENDIX B-SUMP WATER TANK AND PUMP ROOM(Civil work)
-
-
-
... More
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
242.93
51670
212.7
... More
2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
111.47
11784
105.72
... More
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
10
2828
282.85
... More
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
7.25
49115
6772.66
... More
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
33.19
11060
333.24
... More
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
52.67
475530
9028.84
... More
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
9764.1
953854
97.69
... More
5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
165.78
118164
712.76
... More
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
51.62
41848
810.7
... More
5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:
Edges of slabs and breaks in floors and wallsUnder 20 cm wide
57.96
11746
202.66
... More
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
2.88
32894
11421.71
... More
22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
76.95
41910
544.63
... More
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
138.35
55166
398.74
... More
13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
49.94
13280
265.93
... More
13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
85.17
26256
308.28
... More
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
10.17
66933
6581.45
... More
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
61.2
11792
192.68
... More
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
70.85
4975
70.22
... More
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
70.85
10662
150.49
... More
OD216552/2023-2024:pressed steel door of standard pattern with frame as per profile of IS 4351 of section 105 x 60 mm using 18G (1.2 mm thick CRCA ) sheet and shutters made of section 75 x 30 cm for outer styles and horizontal members and then inserted with enclosed and stiffned sheet 26CR as per specification with Zincromate primer coat measured in square meter .
3.15
16902
5365.99
... More
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
8.19
1164
142.16
... More
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
450
75501
167.78
... More
APPENDIX C - RAMP(Civil work)
-
-
-
... More
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
4.05
861
212.7
... More
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
0.81
4806
5933.69
... More
2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
1.08
277
256.95
... More
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
16.88
123557
7321.91
... More
11.19.4:Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand):Ordinary cement without any pigment
13.5
17589
1302.92
... More
16.90:Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
2.7
6107
2262.12
... More
10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
150
100975
673.17
... More
APPENDIX- D - OTHER REQUIREMENTS (Civil work)
-
-
-
... More
12.53:Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
108.88
209374
1923.07
... More
OD216564/2023-2024:Supplying and fixing name board with golden letters fixing on ACP Sheet as per the direction of Engineer in charge.
100
4779
47.79
... More
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
12.6
10214
810.7
... More
5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
1.8
19595
10886.16
... More
5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
153
14946
97.69
... More
23.13.2:Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia
1
246
246.51
... More
23.15.3:Providing and fixing Bail plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (part I).200 mm dia
1
876
876.47
... More
Ground floor additional civil work(Civil work)
-
-
-
... More
15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
67.32
115748
1719.48
... More
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
7.45
49355
6623.18
... More
13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
142.56
42400
297.42
... More
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
142.56
10010
70.22
... More
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
142.56
14117
99.03
... More
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
121.5
17272
142.16
... More
OD216565/2023-2024:pressed steel door of standard pattern with frame as per profile of IS 4351 of section 105 x 60 mm using 18G (1.2 mm thick CRCA ) sheet and shutters made of section 75 x 30 cm for outer styles and horizontal members and then inserted with enclosed and stiffned sheet 26CR as per specification with Zincromate primer coat measured in square meter .
9.45
76842
8131.46
... More
9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
17.1
13599
795.28
... More
9.122.2:Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
3.15
14488
4599.62
... More
OD216566/2023-2024:Engaging Welder/ Fitter Gr-I
10
11550
1155.06
... More
OD216567/2023-2024:Engaging Carpenter
15
16645
1109.67
... More
Electrification(Electrical work)
-
-
-
... More
1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
486
568313
1169.37
... More
1.55.3:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
34
22304
656
... More
1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
367
28387
77.35
... More
OD98983/2024-2025:Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
140
439328
3138.06
... More
90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.
108
18867
174.7
... More
1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
140
56546
403.9
... More
90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell
4
764
191.18
... More
90.5.1.4:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Musical bell with bird sound
4
1286
321.7
... More
OD240624/2023-2024:Supply, conveyance, installation, testing and commissioning of cast aluminium stove enameled elliptical shaped bulk head fittings with 7W LED bulb directly on wall including cutting necessary holes, giving connections with the extended orginal wiring, making good the damgaes, colour washing etc as required.
21
13846
659.36
... More
OD240625/2023-2024:Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade. and 7 W LED lamp and giving connection etc as required
33
8082
244.91
... More
OD244355/2023-2024:Supply, conveyance, installation, testing and commissioning of pre-wired light fitting complete with all accessories and lamps etc. directly on wall and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1 feet 5 W mirror lamp.
10
4524
452.43
... More
90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture
4
5003
1250.96
... More
90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture
30
38610
1287.03
... More
90.3.24.3:Supply & installation of light fittings suspended on ball & socket arrangement with 19 mm down rod Supply, conveyance, installation, testing and commissioning the light fittings of following types made of .5mm thick CRCA sheet accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a required.1200 mm 1X20W LED Lamp with box type fixture
119
179699
1510.08
... More
90.3.10:Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required.
60
13927
232.12
... More
OD244481/2023-2024:Supply and providing every additional length of down rod of 15mm heavy gauge GI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire with original wiring extended including painting as required.
60
13156
219.27
... More
90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
4
20080
5020.12
... More
OD254693/2023-2024:Supply, conveyance, installation, testing and commissioning of 1800 lumen round/ square surface mount fitting made of diecast aluminium, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, CRI>80, Chip make Cree/Osram/lumilled/Nichea/Bridgelux.
62
128795
2077.34
... More
OD254748/2023-2024:Supply, conveyance, installation, testing and commissioning of 20W square surface/recess mount down light fitting made of crca sheet of thickness 0.5mm, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, CRI > 80, Chip make Cree/Osram/lumilled/Nichea/Bridgelux.
58
144785
2496.3
... More
OD257274/2023-2024:Supply conveyance, installation, testing and commissioning of 20-28 W aluminum extruded suspended light with joining kit and all accessories , suspended from ceiling using 2 nos steel chain which comes along with luminary properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.(Bajaj BPCS 20 W LED 4F L WH/ Havells- destello50LP/ equivalent
9
53471
5941.27
... More
90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.
22
10441
474.63
... More
OD244483/2023-2024:Supply, Conveyance,installation, testing and commissioning of 380mm sweep,900rpm heavy duty exhaust fan working on 230V single phase ac metal frame in the existing opening, fixing necessary anchor bolts and nuts etc as required including giving connections with the supplied wire along with the exhaust fan.
22
55972
2544.2
... More
1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
28
8035
286.99
... More
1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
81
25590
315.93
... More
1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
8
3147
393.42
... More
1.28.2:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module
10
1511
151.12
... More
1.28.4:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module
30
5919
197.3
... More
1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
122
55175
452.26
... More
1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
357
35992
100.82
... More
1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
60
9336
155.6
... More
90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket
14
4430
316.48
... More
1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
489
64122
131.13
... More
90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator
14
7910
565.07
... More
OD244484/2023-2024:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof Four Pole (4P) enclosure fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.
14
9846
703.29
... More
2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
1002
1002.28
... More
1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
60
12388
206.48
... More
1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
980
96686
98.66
... More
1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
30
3266
108.88
... More
1.7.1:Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
460
113091
245.85
... More
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
340
36318
106.82
... More
90.11.1.18:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
7654
7654.93
... More
90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
2
13108
6554.19
... More
90.11.1.15:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
4
28979
7244.94
... More
90.11.1.16:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
7935
7935.69
... More
90.11.1.10:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)
13
37006
2846.64
... More
90.11.1.11:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)
1
4514
4514.26
... More
2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door
2
4158
2079.3
... More
2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
7
16976
2425.19
... More
2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
223
52547
235.64
... More
2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
67
65387
975.94
... More
OD244501/2023-2024:Supplying and fixing 40 amps to 63 amps rating, 415 volts,C- curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Triple pole
14
22244
1588.9
... More
2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
194
9.72
... More
2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
10
3999
399.98
... More
2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
23
22610
983.07
... More
2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
4
3963
990.9
... More
2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
11
25044
2276.78
... More
2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
14
41788
2984.86
... More
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
3
9306
3102.24
... More
2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
4
13122
3280.66
... More
1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
450
28719
63.82
... More
1.17.5:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm
70
7223
103.19
... More
1.17.6:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm
154
18190
118.12
... More
1.17.8:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.8 x 1.5 sq. mm
30
4725
157.51
... More
1.17.10:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.10 x 1.5 sq. mm
30
6191
206.38
... More
1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm
450
29466
65.48
... More
1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
460
40811
88.72
... More
1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm
100
11195
111.95
... More
1.17.15:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm
80
13432
167.91
... More
1.17.17:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.8 x 2.5 sq. mm
20
4478
223.9
... More
1.17.19:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.10 x 2.5 sq. mm
22
6365
289.36
... More
1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm
300
30459
101.53
... More
1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm
280
51536
184.06
... More
90.9.1.1:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.50x50mm Cable Management System with base and lid
42
32646
777.29
... More
90.9.1.7:Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap
20
2004
100.23
... More
90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid
120
130351
1086.26
... More
90.9.2.3:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree
5
1256
251.34
... More
90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree
5
1256
251.34
... More
90.9.2.7:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Flat cross
5
1753
350.76
... More
90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap
20
2839
141.98
... More
90.10.1.2:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface
5
1222
244.57
... More
90.10.1.3:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface
10
2506
250.6
... More
90.10.1.5:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )6 module moulded plastic box on surface
30
8504
283.47
... More
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
24
60756
2531.5
... More
90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
1.2
4083
3402.96
... More
90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet
40
1873
46.84
... More
90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)
8
8267
1033.47
... More
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
150
24783
165.22
... More
90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.
3000
19770
6.59
... More
90.14.7:Supply and providing copper earth bus in the panel board
800
5016
6.27
... More
90.14.10.13:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC
1
23146
23146.17
... More
90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL
9
69405
7711.74
... More
90.14.10.12:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC
2
46292
23146.17
... More
90.14.10.3:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL
1
4650
4650.38
... More
2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
533
266.55
... More
90.14.11.2:MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.
1
3517
3517.96
... More
90.14.11.12:MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.
1
1367
1367.63
... More
90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A
13
24982
1921.75
... More
OD257259/2023-2024:Providing and fixing following rating and breaking capacity and Switch Disconnector - SD (MCCBs without protection release) pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 160 Amp
1
7561
7561.5
... More
OD249281/2023-2024:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO). 160A, 415 V, 50 Hz, AC23 A duty, Automatic Transfer Switch with UV/OV protection, Single phase preventer and Phase sequence protection.
1
56984
56984.85
... More
OD244622/2023-2024:Supply and fixing Red , Yellow & blue color LED indicator, AC/DC, as required.
9
726
80.73
... More
OD244630/2023-2024:Supply and fixing 150/5 A, 5 VA, accuracy class 1, Tape wound Metering CT.
6
5389
898.17
... More
OD244631/2023-2024:Supplying and fixing 100A, HRC Fuse with HRC Fuse link with connections, in existing meter board.
6
2812
468.82
... More
OD257275/2023-2024:Supply and fixing 160A HRC fuse base with HRC fuse link on the existing metering cubicle and giving connection as required
3
1103
367.77
... More
OD244632/2023-2024:supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED.
2
9379
4689.71
... More
OD244717/2023-2024:Supply and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base and giving connections as required
3
1071
357.33
... More
90.12.7.1:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 4 sq mm with factory made clamp
60
10519
175.32
... More
90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
20
3991
199.55
... More
90.12.41.21:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp
45
73267
1628.17
... More
90.12.41.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
50
43501
870.02
... More
90.12.41.35:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp
50
68240
1364.8
... More
90.12.7.27:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp
55
17479
317.8
... More
90.12.7.29:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp
90
40469
449.66
... More
90.12.7.31:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm
130
88992
684.56
... More
90.12.5.1:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 4 sq mm
20
3346
167.3
... More
90.12.5.29:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm
10
4387
438.75
... More
90.12.5.31:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm
15
9869
657.96
... More
90.12.5.30:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm
34
18821
553.57
... More
90.12.5.32:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 120 sq mm
60
47619
793.66
... More
90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm
30
17404
580.16
... More
90.12.9.5:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench90/75 mm or nearest size
90
21462
238.47
... More
90.12.9.4:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench77/63 mm or nearest size
18
3267
181.55
... More
90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp
30
6581
219.39
... More
90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
220
53779
244.45
... More
90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
190
52449
276.05
... More
90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm
100
20905
209.05
... More
90.12.12.2:Supply & laying of DWC pipe in ordinary soil 1.2 m below ground level including excavation50/38 mm or nearest size
100
37576
375.76
... More
9.1.20:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)
2
589
294.85
... More
9.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
2
709
354.76
... More
9.1.22:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
2
778
389.18
... More
9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
2
869
434.58
... More
9.1.24:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
3
1677
559.09
... More
9.1.25:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
2
1155
577.88
... More
9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
28
7247
258.85
... More
9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
8
2358
294.85
... More
9.2.21:Supplying and making outdoor end termination with cast resin compound including aluminium
lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 95 sq. mm
1
2001
2001.12
... More
90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size
48
6893
143.62
... More
90.16.3.2:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip
360
47149
130.97
... More
90.16.3.3:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip
100
18193
181.93
... More
90.16.4.2:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip
100
20223
202.23
... More
90.16.4.3:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 6 mm GI strip
20
5175
258.76
... More
90.16.3.19:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm aluminium strip
350
64295
183.7
... More
90.16.4.9:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 6 mm copper strip
60
54530
908.84
... More
90.16.4.15:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm aluminium strip
160
32313
201.96
... More
90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm
160
15478
96.74
... More
OD257277/2023-2024:Supply and providing 1.1/4” UPVC Adaptor, Bore Clamp (2) Bore Cap etc
1
2295
2295.76
... More
OD257280/2023-2024:Supplying and fixing 125A, HRC Fuse with HRC Fuse link with connections, in existing meter board
3
1994
664.67
... More
OD257281/2023-2024:Supply, conveyance,installation and providing 25mm duroflex/canoflex corrugated green hose with new one and giving connections including all charges
6
574
95.74
... More
OD257283/2023-2024:Supply, conveyance , installation , testing and commissioning of Bore well submersible motor pump set 5 HP, 3 phase discharge-160-60LPM, Head range 62mtr-144mtr, 2" outlet dia pipe size Texmo model HRF 19/25/eqt complete with all accessories including trail run etc as required .
1
37997
37997.47
... More
OD257284/2023-2024:Supply Installation, testing and commissioning oF 5HP L & T make model-MUG-6 or equivalent starter panel With suitable relay range,ammeter,volt meter and other accessories including connections
1
7476
7476.78
... More
OD257285/2023-2024:Supply and providing 1.5"NRV -GI
1
599
599.54
... More
OD257286/2023-2024:Supply and laying 1.5" , 21kg UPVC Pipe for borewell ,
180
43293
240.52
... More
OD257288/2023-2024:Supply and laying of 20mm or nearest size Nylon rope
180
8362
46.46
... More
90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)
480
13785
28.72
... More
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
480
21384
44.55
... More
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
550
34864
63.39
... More
90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)
80
7832
97.91
... More
90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)
120
2870
23.92
... More
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
30
747
24.9
... More
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
90
2410
26.78
... More
90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)
4
109
27.47
... More
OD101608/2024-2025:Supply , Installation , Testing and Commissioning of 2KVA UPS with tubular battery, battery stand and all accessories and having following specifications: a) Backup time: 120 minutes b) 1 ph to 1 ph c) Input pf : 0.99 @ full load d) Output pf : unity e) Input voltage range : 140V -280V with cut off f) THD : ≤ 10% g) Overall Efficiency : ≥87% h) Ambient Temperature : 0-40°C i) Generator Compatibility. j) Pure sine wave. k) Battery over charge & under charge cut off. l) Bypass arrangement. m) EN/IEC 620401 for General Safety compatibility n) EN/IEC 620402 for Electromagnetic Compatibility. o) EN/IEC 620403 for Performance p) EN/IEC 620404 for Environmental Compatibility q) battery : exide / panasonic or equivalent
2
273590
136795.16
... More
90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top
1
123
123.09
... More
OD244735/2023-2024:Supplying and fixing of following sizes of light class PVC conduit along with accessories in surface/ recess including clamping cutting the wall and making good the same in case of recessed conduit as required. 20 mm corrugated PVC Pipe
20
1180
59.01
... More
OD255110/2023-2024:Supply, Conveyance, Installation, testing and Commissioning of 100 KVA DG set on suitable CC foundation as per technical details given below :- i. Engine a. Make of Engine : As Specified in the make of material list b. Type of Engine : Diesel Engine c. No. of Cylinders : Suitable to develop the required BHP as per manufacturers’ standard d.Method of Cooling: Water Cooling (with radiator) e. Aspiration : Tubro charged ,inter cooled f. Design : Suitable for generator set application g. Output : BHP ratings specified by the respective manufacturers’ capable of delivering the required power for alternator. " "ii. Standard accessories with Diesel Engine a. Flywheel housing and flywheel to suit single bearing alternator (Close coupled arrangement) b. Air Cleaner c. Coolant Kit d. Fuel Pump e. Electronic governor with solid state potentiometer accepting digital pulse input from PLC(backed with mechanical governor if supplied as standard with the set by the manufacturer) f. Fuel filter g. Lubricating Oil filter h. Residential type exhaust silencer iii.Engine Instrument Panel a. Starting switch with key or button b. Lubricating oil temperature gauge c. Lubricating oil pressure gauge. Water temperature gauge e. RPM Indicator with hour meter f. Battery charging ammeter iv. Safety Controls for Engine a. Trip for low lubricating oil pressure b. Trip for high water temperature c. Providing necessary warning system and other safeties as contemplated in relevant ISS d. Fuel shunt off facility at over speed. iv. Fuel Pipe,1 resistant flexible hoses & 25mm dial or nearest size MS pipe as per manufacturers; requirement for fuel line extension with regulator valve. v. Alternator a. Make : As Specified in the make of material list b. Type : Self exited and self regulated c. Capacity : 100KVA at 0.8PF d. System of Voltage : 3phase, 415V e. Speed : l500rpm f. Voltage regulation band : +1.00% of rated voltage g. Insulation : Class H h. AVR: AVR shall be provided with a motorized or solid state potentiometer. i. IP rating of enclosure : IP 23 j. Waveform distortion : No load ; 1.5%, non- distorting, balanced Linear load ;5% k. Telephone interference : Better than 50 1. Total harmonic factor : Better than 2% Standard control panel with suitably rated MCCB .The characteristics of the DG set shall be such as to operate them in parallel mode. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery. vii. Fuel tank. Integral type fuel tank of adequate capacity . viii. Battery: Required number of suitably rated fully charged battery with leads and terminals as required as per manufacturers’ requirement;ix and separate battery charger for charging from KSEB supply. Operation manual, service manual, list of spares etc x. Acoustic Enclosure a. The DG set shall be supplied along with specially designed, company fabricated (to be fabricated in the same company from where the DG set is delivered) acoustic enclosure to meet the stringent MOEF/CPCB norms ." "b. Sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability. c. Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50 degree Celsius enclosure temperature. d. The enclosure shall be with UV resistant powder coating capable to withstand extreme environment. e. Hardware used shall be of only stainless steel make. f. Insulation material shall conform to IS 8183 specifications for better attenuation. xi. Documents to be supplied. a. Engine manual. b. Spares parts book c.Warranty certificate d. Alternator manual & test certificate 1 set control wiring drawing xii. Installation It shall be installed in the pre-constructed concrete bed complying to relevant IS standards, IE rules and as per the direction of the departmental officials. xiii. Testing and Commissioning The DG set shall be tested as per relevant IS standards. Block load testing shall also be conducted. The DG should have capacity to withstand blocked load of at least 55%.Droop characteristics shall also be tested and adjusted for enabling parallel operation. The load 1 required for testing shall be made available at site by the selected agency at his own expenses. xiv. Warranty During the Guarantee period comprehensive maintenance (excluding oil changes) and services as per manufacture recommendation and repairs shall be arranged from date of commissioning. The DG shall comply CPCB IV + norms.
1
1582155
1582155.11
... More
OD244741/2023-2024:Supply and filling diesel to the generator set as instructed by the departmental staff at site
170
18348
107.93
... More
OD244939/2023-2024:Supply and providing following size M. S. pipe - 5mm thickness complete with suitable size 12mm flange coupling with minimum 4/5mtr using allied packing with MS bolt with washer and rising the same on the wall/ parapet using chain pulleys, scaffolding, supports with M.S angles/channels etc. including painting the pipe with one coat of zinchromate primer over a coat of high temperature resistance alu. paint etc. for extending the exhaust pipe of the newly erected D. G. sets. 80 mm dia or nearest size B class MS pipe.
28
25918
925.65
... More
OD244771/2023-2024:Supply and providing 2mm thick Synthetic elastromeric fire retardant insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength
6
9387
1564.52
... More
14.13.2:Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required80 mm dia
6
5694
949.02
... More
90.6.5.19:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq mm
15
2048
136.57
... More
OD245021/2023-2024:Supply and providing 25x3mm brass nut and bolt etc. as required
6
133
22.25
... More
OD245022/2023-2024:Supply and providing 12x3mm brass nut and bolt etc. as required.
20
267
13.39
... More
OD244978/2023-2024:Supply and installation of GSJB-2014 and necessary connections as required
6
3810
635.15
... More
OD244979/2023-2024:Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.
1
342
342.64
... More
OD244980/2023-2024:Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc as required
1000
4950
4.95
... More
7.9:Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
6
3753
625.6
... More
14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
2.4
21406
8919.3
... More
OD98161/2024-2025:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil.
24
2598
108.28
... More
OD98162/2024-2025:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
200
19538
97.69
... More
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
11
80786
7344.25
... More
Fire Fighting Work(Electrical work)
-
-
-
... More
90.17.5.1:Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A
OUTGOING
(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Jockey Pump
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1
215458
215458.25
... More
90.17.3.3:Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
a. Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.
d. Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 56 m Head
1
72625
72625.15
... More
90.17.1.9:Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head
1
250481
250481.97
... More
90.17.2.9:Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as
required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
1620 lpm at 56 m Head
1
450771
450771.03
... More
OD257301/2023-2024:Supply installation testing and commissioning of 0.5HP open well submersible motor pump set Texmo/Eqt make
1
9866
9866.66
... More
OD248062/2023-2024:Supply installation testing and commissioning of Motor Control Panel- Suitable for operating 5 Hp motor with the following facilities. Auto + Manual operation, Single phase preventor, Volt meter , Ammeter, On & Off push Button (fabricated in 2mm thick Gi sheet & Powder coated with red color)
1
6652
6652.07
... More
OD255111/2023-2024:Supply, installation,testing and commissioning of Kirloskar/eqt make 3.7KW/5HP, pump Model KDS-527++, Three Phase. Suitable for 18 mtr to 40 mtr, discharge- .35 lps to 17 lps. Suc 65mm x Del 50mm.
1
57025
57025
... More
OD98008/2024-2025:Supplying, installing, testing and commissioning of microprocessor based main fire alarm control panel of 8 Zones with visual LCD indications for fire/fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minute alarm operation. The panel shall be fabricated by MS sheet and powder coated both inside and out side door shall be glass fronted type with locking arrangement as per specification.
1
18807
18807.78
... More
90.17.9.1:Supplying and fixing single headed internal hydrant valve with instantaneous
Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal
4
27238
6809.69
... More
90.17.21.1:Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Pendent Sprinkler
190
91933
483.86
... More
90.17.16.1:Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gun Metal
8
36562
4570.25
... More
90.17.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
a. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
b. 20 mm nominal internal dia gun metal globe valve & nozzle.
c. Drum and brackets for fixing the equipmets on wall.
d. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
30 m
4
31152
7788.09
... More
OD257272/2023-2024:Supplying and fixing of weather proof Single Door Hose Box cabinet fabricated from 2mm thick MS sheet with 4mm thick glazed front glass doors and looking arrangements suitable for accommodate external hydrant with butterfly valve, 1 No. 15 Mtrs long hose pipe, 1 No. branch pipe, fittings etc.for yard hydrant.The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of post office red externally and white internally and shall be suitably mounted on wall/ foot base.
4
14402
3600.65
... More
90.17.18.1:Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Gun metal
8
17020
2127.61
... More
90.17.19.2:Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe
1
12358
12358.17
... More
90.17.6.2:Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia
18
40051
2225.08
... More
90.17.20:Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
16159
16159.7
... More
90.17.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required
4
5526
1381.7
... More
90.17.7.1:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia
12
5947
495.6
... More
90.17.7.6:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia
30
33442
1114.76
... More
90.17.7.7:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia
79
115085
1456.78
... More
OD245655/2023-2024:Supplying and installing in position LED fire Exit sign board (180x300mm) of suitable size with battery back up
8
24016
3002.08
... More
OD245656/2023-2024:Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.
1
836
836.28
... More
OD245657/2023-2024:Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia
1
1526
1526.21
... More
OD245658/2023-2024:S I T C of Ball Valve cast iron body as per IS 5312 with ISI mark - 25 mm dia
5
3443
688.77
... More
OD245659/2023-2024:Supply and Fixing of Hose cabinet made of M.S Sheet with full front glass door and locking arrangements suitable to accommodate 1 Nos 15 M long Hose pipes and 1 No Branch pipe. The cabinet shall be painted to scarlet red colour out side & Off white inside.
4
13710
3427.5
... More
17.1.2:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required.
120
161719
1347.66
... More
17.1.3:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required.
4
2182
545.54
... More
17.1.1:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of heat detector operating at 54ºC / 57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
20
24996
1249.83
... More
17.3.2:PUBLIC ADDRESS SYSTEMSupplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
4
4498
1124.62
... More
17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
600
101754
169.59
... More
90.17.11.4:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia
2
8930
4465.28
... More
OD245713/2023-2024:Supply & erection of Glow Sign Board made of 3mm thick PVC foam board for Assembly Point .
4
1469
367.45
... More
OD245714/2023-2024:Supply erection of Glow Sign Board made of 3mm thick PVC foam board for each floor
8
1638
204.84
... More
OD245715/2023-2024:Charges for preparation of Electrical / fire drawing per A3 sheet first copy
6
4657
776.25
... More
OD245716/2023-2024:Copying charges for electrical/fire drawing per A3 sheet additional copies
18
313
17.42
... More
OD245717/2023-2024:5 kg Clean agent fire Extinguisher Modular type of following sizes suitable for below ceiling built in 1 piece with body and bottom. Mild steel body with pressure gauge refillable device and safety release device, Brass valve suitable for B and C classes of fire complete with charge of HFC 236FA/FE36(it is a blend of Hydro Fluoro carbon and organic detossificant essence P 26). The extinguisher shall have pressure gauge for indicationg inside pressure with heat sensitive glass bulb 68 degree with brass forged nozzle and sheet thickness shall not less than 2mm
2
30953
15476.99
... More
OD245718/2023-2024:SITC of fire extinguisher dry chemical powder (ABC) stored pressure type 5kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.
8
28616
3577.09
... More
OD245719/2023-2024:Supplying and installing in position laminated sheet of "FIRE EVACUATION PLAN of suitable size fixed on wall & necessary accessories to fix the plan on wall.
4
3649
912.41
... More
90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia
8
47946
5993.31
... More
90.17.11.6:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia
2
16075
8037.54
... More
90.17.14.4:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia
1
6849
6849.41
... More
90.17.14.5:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia
3
29511
9837.16
... More
1.17.19:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.10 x 2.5 sq. mm
15
4340
289.36
... More
90.6.6.6:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.16 sq mm
24
11566
481.93
... More
90.17.24.2:Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required :100mm dia
1
39668
39668.34
... More
90.17.23.1:Providing & fixing flow switch in following sizes M.S. pipe including connection etc as
required.100mm dia
1
6693
6693.54
... More
SITC of LIFT(Electrical work)
-
-
-
... More
OD245741/2023-2024:Supply, Installation, Testing and Commissioning of 8 passenger Gearless lift with machine room having the following specification including all required standard features.1 .Type of Lift: 8 Passenger capacity , Gearless , Machine room type 2. Load / Persons : 544 Kg. / 8 persons 3 .Rated speed :1 M/Sec. 4. Travel : 12 Mtr ( Approx) 5. No. of floor and entrance served: 4 stops and 4 openings( All openings on same side) 6. No. of floor served : Four( G+3) floors 7. Method of control : Micro processor based V3F with ARD system. 8. Size of available lift well : 1900 mm X 2100 mm (WXD) 9. Car entrance: As per IS. 10. Leveling accuracy : As per IS 11. Car door opening : As per IS 12. Motor: 415V, 3 Phase motor(IE3) 13. Drive : Variable voltage variable frequency(V3F) 14 .Operation : Simplex full selective collective control with ON/OFF switch 15. Construction of design and furnishing of car body work: Vandal proof Stainless steel(SS304,make:Tata/Jindal) finish cabinet with Scratch proof Stainless steel door(sheet minimum1mm thickness), Stainless steel mirror finish ceiling, Aluminium 3mm minimum thickness anti skid flooring, fan with timer cut-off, push to talk, LED display, LED light, hand rails and floor announcement system. All buttons in car and all landings should have Braille sign. 16. Landing entrance : Automatic centre/Telescopic opening Vandal proof stainless steel sliding door as per ISS with provision for mechanical opening key for emergency with full length infra red light curtains and half framed glass door, clear opening about 800mm wide 2000mm high . 17. Call and position indicators : Up/down direction & position Dot Matrix LED indication shall be provided at all landings 18. Electric supply : a) Light 230/50C/s single phase 2 wire system. b) 415V 50C/s 3 phase 4 wire system. 19. Infra red door opening system: To be provide for entire length of the door 20. Automatic Rescue Device :Provide automatic rescue device with an electronic controller powered by maintenance free batteries with capacity for minimum four rescue operation at full load . The rescue operation should act within 10 seconds of power failure 21. Regulation :350V- 450V (SMPS based) 22. Indication in the car : a) Car position b) Call indicator c) Door close/open push button d) Emergency stop button e) push button switch for fan and light f) Non stop button g) Battery operated emergency lamp with rechargeable batteries. h) Battery operated alarm bell i) Intercom wiring with one master unit with two slaves j) Fireman's switch at main lobby i) Auto attendant control (inside the car) 23. Winding handle Manual winding handle for use in emergency. 24. Safeties a) Over speed governor, operated safety gear b) Buffers c) Motor over load and under voltage protection d) Phase reversal protection e) Other safeties as per ISS f) Single phase preventer g) Final limit switch 25. Leveling: Automatic leveling at all landing as per IS. 26. Control panel :Control panel will be dust and vermin proof of sheet metal enclosure 27. Announcement System: To provide lift announcement system 28. Tests :At site test as per IS to be carried out and approval from Electrical Inspectorate before Handing over. 29. Scope of work:- a) Supply of lift materials b)Minor civil works such as removal of temporary brick work in the lift entrance without affecting the building structure, finishing/ altering civil works in lift entrance/ pit by providing brick work & plastering if necessary including minor civil works such as construction of buffer block in the pit machine foundation in the machine room, necessary core cutting , cutting pockets and grounding brackets for the guide rails, grouting boxes for control units, correction of wall opening in the front side in plastering c) Scaffolding d) Door frames e) Supporting steel f) Temporary electric supply for installation of lift. Electric supply for testing and commissioning of lift is to be arranged by the firm on their own account. g) Intercom facilities with one master and two slaves h) Battery operated alarm i) Obtaining Scheme approval as well as energization Certificate from the electrical Inspectorate including preparation of necessary drawing for the same. inclusive of necessary fee to the Inspectorate and first year insurance as per new lift rule by the firm for which no refund will be made from the department including taking insurance for one year as per new lift rule. j) Supply of book let with complete details of maintenance schedule and control diagram. k) Giving training to department staff for attending trouble shooting 30. Guarantee: Company shall carry out free maintenance and service during warranty period which also includes a) Cleaning lift equipment b) Lubrication of all moving parts c) Replacing of lubricating oil when required d) Checking and adjusting contacts e) Replacing fusible item alarm etc. f) Recharging batteries in case of drain/ renewing batteries g ) Replacing /rewinding of all defective parts of the lift including motors and V3F unit.
1
2047435
2047435.14
... More
CCTV(Electronics Work)
-
-
-
... More
OD214778/2023-2024:Supply and installation of 5MP Motorized Bullet Camera, 1/2.8 inch CMOS Progressive, 2.7 to 13.5mm Motorized lens, IR Range: min.80m, Min. Illumination: Color: 0.001 lux @ F1.6, B/W: 0 lux with IR, No. of streams:-Dual or triple stream, Min two streams shall be fully configurable and min 2 streams should support 1080p (Full HD)@25 fps, should support HLC, BLC and Corridor features, Inbuilt Video Analytics : - Loitering, Running, Object Left and Object Lost identification, Parking, Tampering and Motion detection; Should support face detection, people counting etc., Video Compression: H.265+, H.265, H.264, MJPEG, ONVIF Profile (S,G,T), PoE, IP67, Warranty: 5 Year. Make: Norden/ Honeywell/ Bosch /Equivalent
8
186404
23300.61
... More
OD214779/2023-2024:Supply and installation of 16 Ch Embedded Network Video Recorder , H.265+, H.265, H.264 Video Formats, Supports 4K Cameras, 2 SATA HDD, Up to 10 TB for each HDD, HDMI, VGA and ONVIF Profile (S, G, T) , recording throughput: 90 Mbps Warranty: 5 Year. (Make: Norden/ Honeywell/eqnt)
1
32807
32807.6
... More
OD214781/2023-2024:Supply and Installation of Enterprise class Video Surveillance Hard Disk of 8TB. (Make: Western Digital/Seagate)
1
19280
19280.9
... More
OD214782/2023-2024:Supply and Installation of HDMI cable of 5 mtr for connecting monitor and NVR. Make: Belkin
2
3600
1800.28
... More
OD69538/2024-2025:Supply and installation of 1 in and 2 out HDMI splitter with resolutions up to 4K x 2K @60Hz, HDMI 1.4, 1.3, 1.2, all available audio options. Make: Belkin/ Honeywell
1
2700
2700.46
... More
OD214783/2023-2024:Supply and Installation of Wireless Mouse with Silent Buttons, 2.4 GHz with USB Mini Receiver. Make: Logitech
1
1000
1000.05
... More
OD214784/2023-2024:Supply and installation of 19 inch 9U wall mountable rack with covered cable manager, Power strip with minimum 4 numbers of sockets, cooling fan, lockable front door, with glass pannel etc. and accessories. (Make: Netrack / DLink)
1
10500
10500.49
... More
OD214785/2023-2024:Supply and Installation of 1KVA Online UPS having the following minimum specifications- Operating Voltage range: 160 ~ 280 VAC, IGBT, Output Voltage 220 Vac / 230 Vac ± 1%, efficiency- 90%~92%, High frequency and double conversion online technology, Alarm on Input - Low / Fail, Output Overload, Over Temperature, Battery low, CERTIFICATIONS ISO 9001:2015, ISO 14001:2015, CE , ROHS, OHSAS, Battery bank : 2160VAH or higher, tubular C10 Batteries with Suitable Battery rack , UPS warranty: 5 years or above, Battery warranty: 5 years or above Make on UPS : /Hykon/ APC or equivalent, Make on Battery: (Hykon/ Exide or equivalent)
1
44500
44500.31
... More
LAN and IP PBX(Electronics Work)
-
-
-
... More
OD214765/2023-2024:Supply and Installation of Gigabit L3 manageable switch with 24 x Gigabit Ethernet ports, 4 x SFP ports, etc. with all necessary accessories. Warranty : 5 year. (Make: Cisco/hp/ Fortinet / equivalent )
2
73181
36590.61
... More
OD214766/2023-2024:Supply and Installation of 24-Port Gigabit Ethernet PoE+ Smart Switch with 2 SFP Ports (190W) with all necessary accessories. Warranty:5 Year. Make: Netgear /Equivalent
1
41408
41408.51
... More
OD214767/2023-2024:Supply and installation of 16-Port Gigabit Poe Switch with 52Gbps forwarding capacity, 16K MAC Address Table, 180W power budget, SFP Ports, RoHS compliant. Rack mountable and having 5 year warranty Make: NetGear /Cisco/ equivalent.
1
30000
30000.84
... More
OD214769/2023-2024:Supply and installation of 24 port patch panel ( fully loaded) and Termination of existing UTP cables on patch panel with wire manager including all other charges. Make: Molex/D Link
4
29608
7402.11
... More
OD214770/2023-2024:Supply and Installation of CAT-6 , 2 meter Patch cord for interconnecting information outlet and computers . (Make: Molex/D Link)
75
18204
242.73
... More
OD214771/2023-2024:Supply and Installation of CAT-6 , 1 meter Patch cord for interconnecting patch panel and switch. Accepted model: Molex/ D-Link
80
14865
185.82
... More
OD214772/2023-2024:Supply and Installation of CAT 6 information outlet with spring shutter front access in recess/on surface as per the site condition (Make:Molex/D Link)
70
35040
500.58
... More
OD214773/2023-2024: Supply and installation 802.11ax 4x4:4 Wi-Fi 6 Access Point, 3.55Gbps aggregate wireless throughput, 3.5Gbps aggregate wired throughput, Dual-band 4x4:4 MU-MIMO with DL/UL OFDMA technology, Up to 175-meter coverage range. Warranty: 3 Year. (Make: Grand Stream/ Ubiquiti /Equivalent)
2
55400
27700
... More
OD214774/2023-2024:Supply and Installation of IP PBX system having following minimum features and specifications: 2 FXO/2 FXS, Network Interfaces Three self-adaptive Gigabit ports (switched, routed or dual mode) with PoE+, Users: 500, Concurrent calls (G.711): 75, Wall mount & Desktop , 1*USB 2.0, 1*USB 3.0, Certifications: FCC: Part 15 (CFR 47) Class B, Part 68 CE: EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 62368.1, ES 203 021, ITU-T K.21 IC: ICES-003, CS-03 Part I Issue 9 RCM: AS/NZS CISPR 32, AS/NZS 62368.1, AS/CA S002, AS/CA S003.1/.2 Power adapter: UL 60950-1 or UL 62368-1
1
40500
40500.02
... More
OD214775/2023-2024:Supply and installation of 2 Line IP Phone with Full-duplex speakerphone, PoE, built-in dual-band Wi-Fi support, backlit graphical LCD display, Hold, transfer, forward, 5-way conference. (Make: Grand Stream/Equivalent)
20
132814
6640.73
... More
OD214776/2023-2024:Supply and installation of standard graded structured LAN management Cabin consist of following features : 19 inch 27U rack (600mm-D) with Aluminum extruded Frame structure, covered wire manager, cooling fan, AC distribution box and all other accessories. ( Make : Netrack/DLink) .
1
31300
31300.56
... More
OD214777/2023-2024:Supply and installation of 19 inch 12U wall mountable rack with covered cable manager, Power strip with minimum 4 numbers of sockets, cooling fan, ,lockable front door, with glass pannel etc. and accessories. (Make: Netrack / DLink)
1
12000
12000.59
... More
Audio System(Electronics Work)
-
-
-
... More
OD214750/2023-2024:Supply and installation of Mixer Amplifier with 480W Power output having 3 microphone inputs, 2 AUX inputs, 100 V / 70 V line or 4 ohm speaker outputs, Frequency Response: 50 - 20,000 Hz, Signal to Noise Ratio Over 60 dB ,etc. Preferred make: TOA 3248DM/Equivalent model of Shure or Televic make
1
55380
55380.93
... More
OD214751/2023-2024:Supply and Installation of 10 Channel Mixing Console having 4 mic/ 10 Line, 1 Aux send, , Phantom power, Balanced Main mix outputs with XLR connectors. (Preferred Make:Yamaha/Equivalent
1
25500
25500.49
... More
OD214752/2023-2024:Supply and installation of two-way loudspeaker- 6.5inch / 1inch, black, 70/100V transformer, power taps 60 - 30 - 15 - 6 watts, weather proof ABS plastic housing, including click mount bracket. Make: APART MASK6CT-BL
8
248003
31000.38
... More
OD214754/2023-2024:Supply and Installation of Dynamic Handheld Microphone having frequency response: 50- 15000Hz, Sensitivity: -50dB-/+3dB, Impedence:350 ohms, with MIC holder, 6.5M XLR Cable and all other accessories. (Preferred Make: Studiomaster/ equivalent) SM 500XLR/ equivalent)
2
14601
7300.7
... More
OD214755/2023-2024:Supply and Installation of Professional series 40 cm Gooseneck mic with microphone capsule, stable base for XLR-3 gooseneck microphone, Phantom powering P 24 - P 48, Etc. Make: SENNHEISER/SHURE/Audio technica
2
71300
35650.35
... More
OD214756/2023-2024:Supply and installation of UHF wireless desktop microphone and receiver with a push-type ON/OFF switch on transmitter, 2 x 1.5 V AA battery on transmitter etc. supplied with all necessary accessories including power adapter for receiver. Preferred make; TOA WS-422/ Equivalent model of Shure or Televic make
2
80161
40080.98
... More
OD214757/2023-2024:Supply and Installation of 48V Professional Phantom Power Supply for Condenser Microphone
1
2000
2000.57
... More
OD214758/2023-2024:Supply and Installation of PA microphone floor stand. (Ahuja DGN)
1
2000
2000.57
... More
OD214759/2023-2024:Supply and installation of audio conference control unit with all necessary accessories and having tone controls, one mic and one aux input, Built-in 120 W Class D Amplifier, can connect 64 delegate/ chairman unit, USB audio interface for web meetings or audio recording. Preferred make: TOA TS-7912DW-AS/ Equivalent model of Shure or Televic make
1
119461
119461.38
... More
OD214760/2023-2024:Supply an installation of Chairman unit with goose neck condenser microphone, and having Microphone, speaker on-off control by speech button, Priority button, Volume control, etc. Preferred make: TOA TS-791L-AS or Equivalent model of Shure or Televic make
1
34800
34800.8
... More
OD214761/2023-2024:Supply and installation of Delegate unit with goose neck condenser microphone, and having Microphone, speaker on-off control by speech button, Volume control, LED Indicator. etc. Preferred make: TOA TS-792L/ Equivalent model of Shure or Televic make
6
194741
32456.9
... More
OD214762/2023-2024:Supply and installation of 3 meter interconnecting cable with suitable connectors for connecting the delegate units each other. Preferred make: Original OEM make of above conference unit.
9
57603
6400.39
... More
OD59701/2024-2025:Providing Over floor Cord Protector to Protect cables from pedestrian foot traffic and to prevent damage to electrical cables. ( for connecting cables of conference system)
4
5600
1400.16
... More
OD214763/2023-2024:Supply and Installation of 19 inch 17U (Depth-800) rack for placing amplifier, mixer, mics, laptop, etc with sufficient nos of tray (includes one sliding tray for mixer), door and safe lock, AC distribution box and all necessary accessories.
1
17745
17745.2
... More
OD61954/2024-2025:Supply and Installation of ISO Certified 3 KVA/ 72V online UPS with built in battery having minimum 45 minutes backup on Full Load with Warranty: 5 year Recommended: Microtek, V-Guard, Numeric, APC or equivalent
1
55866
55866.93
... More
Video System(Electronics Work)
-
-
-
... More
OD214788/2023-2024:Supply and installation of 4K Camera 1/2.5 inch high quality UHD CMOS sensor, Pant/tilt/Zoom features , Digital Zoom : 4x , Video Compression : H.265/H.264/MJPEG, Main Stream Resolution : up to 3840x2160, Sub Stream Resolution : up to 720x576, HDMI, RJ 45, 1x 3.5mm audio interface, Line in, 1x USB3.0, type-c. Remote Control, with wall/ ceiling mount accessories . Make: Panasonic/People Link / Logitech/ equivalent
2
327119
163559.98
... More
OD214789/2023-2024:upply and installation of Ultra-Short Throw Interactive Projector with brightness level of 3,500 lumens and WXGA resolution, 3LCD technology, interactive display, Supported OS - Mac/ Ubuntu/ Windows. Accepted Make: Epson EB-685wi/BenQ/Viewsonic
1
163885
163885.2
... More
OD214790/2023-2024:Supply and installation of 6 feetX 4 feet Ceramic white board
1
9684
9684.46
... More
OD61967/2024-2025:Supply and installation of Moving type Fixing arrangements for projector and screen on wall including necessary power supply provision to the projector.
1
20000
20000.64
... More
OD214793/2023-2024:Supply and installation of Portable 10.1 inch ( minimum) 4-CH SDI and HDMI Video Switcher with 2×HDMI & 2×3G-SDI inputs, support, 2×HDMI PGM output,1×HDMI multiview out, 1×USB type-C output, Audio mixer: HDMI embedded audio and 2-Ch MIC/line In; audio delay. Make: AV Matrix PVS0403U/ equivalent
1
120520
120520.6
... More
OD214794/2023-2024:Supply and installation of 40 inch or higher full HD, LED Colour Television having following minimum specifications : Audio/Video in and out, HDMI , USB with full function remote controller, mounting kit etc. Warranty : 5 year Recommended Make :- Samsung/Sony/LG/Equivalent
5
235002
47000.44
... More
OD214792/2023-2024:Supply, and Installation of tiltable Ceiling/ Wall Mount accessories for TV
5
17126
3425.21
... More
OD214791/2023-2024:Supply and Installation of USB Audio Adapter with 3.5mm Speaker/ Headphone and Microphone Jacks (Black)and all necessary connecting cables to the existing sound system.
1
3785
3785.76
... More
OD214787/2023-2024:Supply of Gigabit USB Type C or Type A to RJ 45 converter. Make : TP-Link or Equivalent
1
2211
2211.01
... More
OD68893/2024-2025:Supply and installation of 1 in and 8 out HDMI splitter with resolutions up to 4K x 2K @60Hz, HDMI 1.4, 1.3, 1.2, all available audio options. Make: Orei/Belkin/ Honeywell
1
10200
10200.84
... More
OD61927/2024-2025:Supply and installation of 10m HDMI 2.1cables for camera or TV Make: Honeywell/ Belkin
4
28803
7200.81
... More
OD69471/2024-2025:Supply and installation of 15m HDMI 2.1 cable. Make: Honeywell/ Bestnet
2
14146
7073.3
... More
OD68976/2024-2025:Supply and installation of USB 3.1/ 3.0 Cable, Male USB C or A to Male USB C Cable, 2m (as per requirement at site)
2
5481
2740.9
... More
Cables and Conduits(Electronics Work)
-
-
-
... More
1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
200
19732
98.66
... More
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
340
36318
106.82
... More
OD214742/2023-2024:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the all necessary accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. (Make: Precision equivalent)
15
12758
850.56
... More
1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
1350
77881
57.69
... More
OD214743/2023-2024:Supply and laying of Microphone cable with high quality connectors (Preferred Make: Finolex, Polycab, RR Kabel )
20
1057
52.85
... More
OD214744/2023-2024:Supply and drawing of standard graded speaker cable(2 core*1.5 sqmm) through the existing conduit and giving connections as required. Recommended model: MX/Havells
75
3824
50.99
... More
OD214745/2023-2024:supply and drawing 10 SWG bare copper conductors on the wall with necessary clamps with a spacing not exceeding 1 meter with necessary connections as required and tin plating on all ends and joints.
35
2433
69.53
... More
5.2:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
1
6271
6271.18
... More
OD214746/2023-2024:Providing necessary power supply for displays and racks using 1.5 sq mm FRLS PVC insulated copper conductor in surface/recessed conduit with modular switch, modular plate, suitable GI box and earthing point
9
22501
2500.16
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements