Public Works Department Tender

Non PSR:- Supplying and fixing of LED flood light luminaries 200W (Power output), white light with pressing die cast aluminium diffuser clear toughen glass housing IP65/66, efficiency 110LM/ Watt, LED chip package 5050,CRI 70,rated voltage :240V,rated frequency 50Hz safety operating voltage range 140V-280V AC and with necessary over voltage, short circuit open circuit&surge protection. The Luminieries Shall be waranted for 3 Years on site replacement/rectification. The NABL type test report, driver safety test report as per BIS,LM80 from chip manufacture shall be furnished. (Make: Philips/Havells/Crompton /Everyday/Bajaj) The rate inclusive of all taxes.

Non PSR:- Fabrication, commissioning supply, erection, testing and of one no of SMC Box (Make:Sintex) with metering and timer panel panel board for the power supply of over all size 850mm x 350mm x 250mm made out of glass wool with resign material. The front top portion have energy meter with viewing glass with 10mm hylem sheet. The bottom side compartments with 40 - 63A rating, TPN MCB, "C Series, 10KA breaking capacity (Make - Siemens/ABB), 1no. of Timer switch (Daily) analog with battery backup to 200hrs. (Make - L&T - Hagger/ Legrand - Lexic), Ino. 60A power contactor (Make - C&S), Ino. of toggle switch (Make - C&S), 3nos of signal lamp (Blue, Red, Yellow). (Make Siemens/C&S/ L&T/Teknic). The switch units are to be fixed with in the allotted size in the 10mm hylem sheet. The bottom sheet of the shell should be of PVC thick cold rolled for cable entry. The panel has to be mounted 75mm x 75mm x 6mm M.S.L angle on the floor with in the height of 375mm. Interior connection between the switch fuse units are to be done with 2.5sqmm / 6.0/ 10.0sqmm ISI marked, FR PVC insulated, single core copper conductor cable. (Make - Finolex / Polycab). The door should be of flush type inter locking in one position. The panel provided with removable type gland plated to the bottom and with sufficient holes of required diameter.Earth work excavation of foundation trench of size 1.00m x 0.60m x 0.60m and filling river sand for a depth of 0.10m and P.C.C. 1:2:4 of size 1.00m x 0.60m x 1.0m. The cost should be inclusive of minor modification suitable for site condition

H/C Crane 20 tonne capacity