Public Works Department Tender

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

10.30.1:Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :4.0 mm thick glass panes

10.12:Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD176041/2023-2024:Supplying and installation of best quality polymer vertical blinds with all fittings including cost and conveyance of material,labour charges etc.complete.

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium

9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

OD178345/2023-2024:Supplying and fixing High Density High Moisture Resistance (HDHMR) 18mm thick prelaminated fibre board double sided, 3 layer pressing exterior grade sheet panelling for office cubicle cupboard etc. backing or studding with screws finishing and painting and including all materials, conveyance and labour charges etc. complete.

OD178369/2023-2024:Supplying and providing Nilkamal veneto High back Executive chair size 63x 65x115x17.5 (PU cushioned seat & back,PP arms with soft PU pads,Knee Tilt mechanism; Nylon star base,Twin wheel nylon casters) including all cost and conveyance of materials and labour charges etc. complete.

OD178465/2023-2024:Supply and providing Nilkamal Giza Mid Back Office Chair size of 71x71x106x11.4 (cushioned seat ,Knee Tilt mechanism; ,Twin wheel nylon casters) including all cost and conveyance of materials and labour charges etc. complete.

OD178461/2023-2024:Supplying and Providing Nilkamal Eeezy Go Plastic Armchair size 60x57x74x2.4 including all cost and conveyance of materials and labour charges etc, complete.

OD178450/2023-2024:Providing Rubco L -shape work station Dimension (1660+1200)x1030x(600+450) mm Rubco code No 51A50WS10 (as per attached drawing) including the rate of conveyance, loading and unloading charges etc, complete.

OD174468/2023-2024:Supply and Installation of Rubco Senior executive Table, Size shall be 2400mm Width x910mm Depth x 760 Height mm, Rubco code TSRM01 (as per attached drawing) including conveyance loding and unloading charge etc. complete

OD174470/2023-2024:Supply and Installation of Rubco big shelf, Size shall be 1900 mm x 1000 mm x 450 mm, Rubco Code SBWN01(as per attached drawing) including conveyance loding and unloading charges etc. complete

OD181779/2023-2024:Providing and fixing office signage boards with good quality 4mm thick ACP sheet af approved colour as directerd by the Engineer in charge and indicating necessary

OD174477/2023-2024:Engaging man coolies

OD181923/2023-2024:Acid washing for flooring using mild HCL acid for cleaning floor including cost of acid labour charges etc. complete