Oil Palm India Limited Tender

- do - do - for 1st depth of pit (1.50m to 3.00m).

Filling of earth in layers including watering, ramming consolidation etc. complete

Dry rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size).

Brickwork with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6

Brickwork with common burnt clay modular bricks of class designation 7.5 for superstructure in cement mortar 1:6

Providing & laying in position cement concrete of 1:2:4 ( 1 cement: 4 coarse sand: 8 graded stone aggregate 20mm nonimal size) including cost of centering and shuttering.

Providing & laying in position cement concrete PCC 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost of centering and shuttering.

Random Rubble masonry with hard stone in foundation & plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 Coarse sand :12 graded stone aggreagate 20 mm nominal size) up to plinth level with cement motar 1:6

Providing and laying in position of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of reinforced cement concrete, including the cost of centering, shuttering and finishing etc. complete excluding cost of reinforcement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete with Mild steel and Medium Tensile steel bars.

Pointing work with cement mortar 1:3 (1 cement : 3 fine sand).

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 with an admixture of water proofing material.

12 mm cement plaster of mix 1:4

15mm cement plaster of mix 1:4

Extra flushing coat with neat cement

Supplying & fixing well seasoned hard wood of anjily/ jack wood planed and framed work for reparing door shutters as directed by departmental officers.

Labour carge for reparing doors, windows etc. including removing the damged hinges etc. as directed by the departmental officers.

Carpenter

Coolie

Supplying and fixing 24 BWG, GI plane sheet door shutter in single leaf with 65x25mm Anjily wood Shutter frame all round and two intermediate horizontal of the same size at inside and with 40x20mm frame as above at outside sheet being fixed to the frame with wire nails of required size and shutter being fitted with 20nos. 16mm dia kondies fitted on 20mm metal concrete block 225x225x150mm with two numbers pattai hinges, 1no 75mm hooks and eyes at inside fitted on fisher plug etc. including enamel paint two coat over a priming coat as per specification of size 80x165cm.

Roofing with fully corrugated AC sheet cutting and fixing with 8mm GI bolt & nut, GI washer, bitumen washer etc. including cost and conveyance of all materials and labour charges etc. complete

Supplying & fixing AC ridge including GI bolt and nut washers etc complete

Supplying & fixing following iron specials including removing the damged ones wherever necessary as directed by departmental officers

100 mm hooks & eyes

200 mm cabin hooks & eyes

90 mm hasp and staples

200 mm tower bolt

100 mm butt hinges

150 mm hasp and staples

30 cm long Pattai hinges

300 x 40 x 4 mm hold fast

Supply and fixing roofing compound over AC sheet roof for preventing leakage.

Supplying and fixing 4mm thick glass planes with wooden fillets for windows and ventilators including dismantling the damaged ones wherever necessary.

Labour charges for fixing MS hold fast for door frame

Mason

Man coolie

Supplying and fixing Indian type water closet 580mm or nearest size with all accessories including dismantiling old WC (Orissa pattern) type of size 580x440mm

Labour charges for repairing the smokeless oven including rearranging the hearth and AC pipe' plastering as directed by the departmental officers.

Mason

Man coolie

Labour charges for lettering the date of maintenance with red paint as directed by the departmental officers.

Painter

Supplying and fixing clay burnt hearth of standard size

Single hearth

Double hearth

Supply and fixing weld mesh 50x50mm 14g GI net to the frame work already fixed including painting two coats with synthetic enamel paint over two coats of zinc chromate primer etc. including cost of all materials, coveyance, labour charge etc. at all levels.

Cement washing one coat to the old surface after cleaning the surface

White washing one coat to the old surface after cleaning the surface

White washing with lime to given even shade for new work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Supplying & fixing 110 x 63 mm OD rigid PVC Tee (4kg/cm2)

Supplying & fixing 110 mm OD rigid PVC pipe (4kg/cm2) including all charges for excavation of trenches and filling etc. complete.

Supplying & fixing 110mm rigid PVC bend (4kg/cm2)

Supplying & fixing 63 mm PVC ventilating pipe 3m long with 3 mm PVC ventilating cowl with mosquito proof arrangements including fixing to walls with clamps etc. Complete

Providing and fixing factory made panel PVC door shutter ( 30mm thick )consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm forstyles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm

Supplying and fixing ready made RCC ring (1.5m dia ie. 5 feet)without cover slab including earth work and levelling etc complete .

Supplying and fixing ready made RCC cover slab for ring.