Local Self Government Department Tender

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

OD397139/2024-2025:Supplying and fixing Pressed Steel Windows and Ventilators of standard pattern with frames with glazed shutters 4 mm thick plane glass as per profile of sections 82*62 mm, 12 mm dia. rod at 10 cm c/c, 25 x 5 mm flat 6 numbers with 75 mm M.S hinges, 50 mm M.S hook, 125 mm M.S stay and handle for windows with section 105*60mm without steel shutters, made of sections 75*30 mm for outer styles and horizontal members and then inserted with Aluminium beadings.(data derived for 150 x 150 cms three panelled)

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD397212/2024-2025:Supplying and fixing 20 mm thick ready made PVC door ( 90 x 200 cm ) with frame 50*42 mm including conveyance ,cost of fitting , labour for fixing etc.

OD397213/2024-2025:Supplying and fixing at site ALUMINIUM COMPOSITE PANEL ( A C P ) of approved make and colour certified for exterior applications, 3 mm thickness with 28 to 30 mm microns P V D F coating confirming to A S TM standard with top aluminium skin of 0.25 mm and with a bottom aluminium skin of 0.25 mm with service coating of polyester paint , laminated to a centre core of 2.5 mm single recycled low density polyethylene material. The panels shall be cut to sizes of required grid dimensions with the site condition. The panel shall be fixed on prefabricated frame work using 38 mm x 25 mm x 1 mm thick Aluminium extruded sections of approved make joined with standard cleats and fasteners. e gaps formed between the panels shall be sealed with silicone sealant. The rate inclusive of cost and conveyance of all materials, labour for erection , hire charges of scaffolding, etc. complete .

OD397227/2024-2025:Supplying and fixing in position stainless-steel letters in Malayalam/ English of size 5 to 10 cm as per design including cost of all fitting etc.(cost of board and frame work shall be paid separately)

OD397351/2024-2025:Engaging Labour

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

50.12.2.2:Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding