Local Self Government Department Tender

90.6.6.5:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

90.12.24.4:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.24.5:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

OD305137/2024-2025:Supplying and fixing 100 A HRC fuse with HRC fuse link with connections in existing meter board

OD305138/2024-2025:Supply and providing 50 mm flange set

OD305139/2024-2025:Providing, laying and fixing 50 mm Dia GI pipe (Medium class) for supporting the delivery pipe on the top of the well, the pipe placing across the well and clamping each other required accessories etc.

OD305140/2024-2025:Supply and fixing flat iron clamps made of 40x6 mm flat iron clamp of 40 cm with suitable size bolt and nut for fixing delivery pipe on top of the well including painting as required.

OD305141/2024-2025:Supply and laying 10 mm or nearest size stainless steel rope.

OD305142/2024-2025:Supply and laying 12 mm or nearest size GARFIL/GARWARE nylon rope

OD305143/2024-2025:Supply, threading, laying and jointing of 50 mm dia 80 sedulous ASTM pipe approved make with specials as delivery pipe using required leak proofing materials etc. as required.

OD305144/2024-2025:L&T make motor starters of following rating ,Fully automatic star/delta pump starter for three phase 15 HP submersible motor.

OD305145/2024-2025:Supply and fixing single phasing cum dry run preventer

OD305146/2024-2025:Lifting the damaged existing open well submersible motor pump from well, disconnecting the supply wire, dismantling the delivery pipe and accessories which are not in use and handing over the same to the concerned departmental authorities with proper written acknowledgement.

OD305147/2024-2025:Supplying and fixing 50 mm bronze globe valve in the existing GI pipe line with accessories as reqd.

OD305148/2024-2025:Digital type, class 1 accuracy, VAF meter for measurement of voltage in three phases, current up to 60 Amps , with selector switches, CT's,and Indication lamp, etc .

OD305149/2024-2025:Supply and providing 25x6mm brass nut and bolt as required

OD305150/2024-2025:Supply and providing 12x3mm brass and bolt etc. as required.

OD305151/2024-2025:Providing and fixing 2x25x3mm GI strip on surface or in recess for connections etc. as required

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

90.17.14.2:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :50mm dia

OD356662/2024-2025:Supplying and drawing following sizes of FRLS PVC insulated copper conductor ,single core cable in the existing surface/PVC conduit as required-2*10 sq.mm

OD356686/2024-2025:Labour charge for dismantling of existing main switch along with accessories, connections etc as required.