Local Self Government Department Tender

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

OD313291/2024-2025:60.7.1. DRY RUBBLE MASONRY. Dry Rubble masonry without concrete levelling course with good quality blasted rubbles including packing to compactness to lines and levels cost conveyance of all materials labour charges etc complete as per directions of Departmental officers at site.

OD313292/2024-2025:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm or nearest available size (modified 11.41.3)

OD313293/2024-2025:supplying and fixing pvc door frame 53x65 mm or nearest available size with vertical frae joints fitted for pvc head providing concealed reinforced motor cut and welded corners on computer aided machine,tie rod at the bottom to keep the frame iron hollow connecting elasto metric gas cutting grooves etc complete

OD313294/2024-2025:supplying and fixing pvc door shutter to suit the door frame already fixed using 200 mm wide collar pvc planks in shutter frame 24 mm thick and 60 mm wide with retaining by long by long classified materials in inter ale joints completely selected cover and lifted directly to the connected steel reinforcement for door frame including all cost conveyance and labour charges etc complete

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

OD313306/2024-2025:Providing and fixing PVC pipes including of pipes with one step PVC solvent cement, excluding trenching, refilling and testing of joints complete as per directions of Engineer-in-Charge 75mm dia 10 kgf/cm2

OD313307/2024-2025:Providing and fixing PVC pipes fitting including jointing of pipe with one step solvent cement and pvc pipe 32mm 10kgf/cm2

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

OD313315/2024-2025:Supplying and fixing meter Box for safeguarding water meter including cost, conveyance and fitting charges

OD313317/2024-2025:Supplying and fixing name board in granite stone 61cm x 92 cm fixed at site withcement mortar 1:4, 12mm thick including all coat of materials labour charges etc. complete.

OD313319/2024-2025:Supplying and fitting 20mm dia water meter including relevant fittings and fixtures including cost, conveyance, labour charges

OD313320/2024-2025:Providing and laying departmental 60mm thick factory made cement concrete interlocking paver block of M30 with strong vibrating carpet of approved size desingn & shape laid in required color and pattern over and including 50mm thick compacted bed of 6mm metal filling the joints with fine sand etc.all complete as per the direction of overseer in charge