Local Self Government Department Tender

50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

5.7 : Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.9.12 : Centering and shuttering including strutting, etc. and removal of form for:Well steining

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od1613981/2021_2022 : Supplying and stacking at site.<br>Stone screening 11.2 mm nominal size (Type B)

od1613982/2021_2022 : Supplying and erecting open well submersible pump with motor using best quality, ISI<br>marked<br>motor and pump to suit the well, including cost of column pipe(UPVC), UG cable, Nylon rope, and all<br>other fitting to including panel board etc and all charges for conveyance of materials, labour, and cost of<br>wiring (KSEBcharges for electrical connection paid seperately) etc. complete.

od1613983/2021_2022 : Supply and errect ready made ferrocement pump house of size 1.50 X 1.50 X 2.10 m with following specifications: RCC post shall be fixed in P.C.C 1:3:6 of sizes 45X45X45cm, foundation alround with solid block masonry with CM 1:6 of 30 X 40 cm, size ferrocement wall of 1.5m X 2.10m of thickness 25mm, ferrocement triangular type roof made of ferrocement slab of thickness 25mm, MS door of size 75X210cm with 1mm thick MS sheet and suitable GI frames and painting with two coat of synthetic enamel paint over a coat of iron primer and locking arragements and a pad lock of 5 lever, MS ventilator of size 60X45cm. flooring with CC 1:4:8,75mm thick and plastering over 12mm thick cement plaster 1:4 and neat cement flushing coat in all wall surface and roof shall be painted with two coats of exterior emulsion paint over a coat of primer. including all labour charges etc. complete.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

18.12.6 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore

18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal

18.59.1 : Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):50 mm dia