Local Self Government Department Tender

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

OD224612/2024-2025:Supply and fixing L&T make MR-Gi Single phase starter controller ( manual type) with capacitor, dry run preventor and digital indication etc suitable for 2 HP single phase 230 V 50 Hz Submersible motor pumpset on existing board and giving connection as required

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

OD224609/2024-2025:Supply installation testing and commissioning of new 2 HP Submersible motor pumpset suitable for 150mm bore well with 2HP,1 phase ,50Hz,220V 58/114/138 MT head, 5000/3250/2000 LPH Discharge HRF 09/25 TEXMO or equivalent make of CRI/DECCAN/KIRLOSKER/V-GUARD delivery size of32/40mm or nearest size using chain pully block and leack proof materials as required and suspended on existing rope including fixing to existing GI/Column pipe as delivery pipe, lowering upto bottom of well at required water level with necessary supports at both ends of motor pumpset, giving all electrical connections and conducting trial run at full load satisfactorily.

OD224608/2024-2025:Supply ,laying and jointing of 42 mm or nearest size column pipe of approved make conforming to relevant standards using leack proof materials as required

OD224610/2024-2025:Supply and providing stainless steel adaptor suitable for 42mm/nearest size column pipe as required

90.17.8.3:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :40 mm

OD224611/2024-2025:Supply and providing 20mmor nearest size nylon rope

OD224684/2024-2025:Supply and providing suitable iron clamp with nut and bolt at top of the well

OD224606/2024-2025:Supply and providing 40 mm gate valve (brass) on delivery pipe as required

OD224607/2024-2025:Supply and providing40mm non return valve (brass) on delivery pipe as required

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD224614/2024-2025:Supply and fixing 2*25*5 mmGI strip test joint for earthing

OD224615/2024-2025:Supply and fixing25mm*3mm GI Strip earth lead from test joint to earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD224613/2024-2025:Supply and providing superior quality brass bolt with hexagonal/square head ,nut and washers for the following size etc as required 25*6 mm