Local Self Government Department Tender

OD350555/2024-2025:Supply and providing 4"x 3" uPVC reducer Sch 80 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350556/2024-2025:Supply and providing 4" uPVC flange set complete with sealing materials and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350557/2024-2025:Supply and providing 4" uPVC MTA/FTA Sch 80 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350558/2024-2025:Supply and providing 4" uPVC Bend Sch 80 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350559/2024-2025:Supply and providing 4" uPVC 45 Elbow Sch 40 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350560/2024-2025:Supply and providing 4" uPVC Tee Sch 80 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350561/2024-2025:Supply and providing 8"x 4" uPVC reducer Sch 80 and giving connection to the existing pipe line using suitable adhesive etc as required at site

OD350319/2024-2025:Supply and providing 4" uPVC pipe Sch 40 and giving connection to the existing pump set and pipe line using suitable adhesive etc as required at site

OD351859/2024-2025:Supply installation testing and commissioning of Electronic type flow meter suitable for 4" dia pipe with a flow rate 50KL to 100KL per Hr complete with Digital display duly tested and calibrated in the existing discharge pipe line etc. as required at site

OD351862/2024-2025:Supply and fixing 4" brass NRV in the existing uPVC pipe line

OD351863/2024-2025:Supply and fixing 6" cast iron flange type NRV with packing materials and bolt and nuts etc in the existing uPVC pipe

OD351864/2024-2025:Supply and fixing 4" Brass ball valve in the existing uPVC pipe line

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.10.10:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16A -100A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

OD351869/2024-2025:Supplying and fixing following rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.40A-63A FP MCB

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

OD351875/2024-2025:Supply and providing LED indicator lamp (Red, Green, Black, Yellow, Orange) in the existing panel board and giving connection

OD351876/2024-2025:Supplying and fixing three phase LED multi function meter to read voltage, ampere, frequency and power with class 1 accuracy inside the existing panel boards including all connections, etc. as required

OD351877/2024-2025:Supply and fixing 90/5, 10 VA , accuracy class 5P/10 Current Transformer in the existing Neutral Terminal of the 315 KVA transformer and giving connection

90.14.28.7:S & F Motor starters of the following ratingsFully automatic star delta starter for 25HP motor

90.12.5.30:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.6.5.13:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm

90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

OD343963/2024-2025:Charges for preparation of documents for approval from Electrical Inspectorate, KSEB remitting statutory fee for approval including all liaison works