Local Self Government Department Tender

75.9.3.pa : Plastic Roads - Bitumen S-65 brbrPlastic roads- Bulk Bitumen Rate brbr20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder -brbrBitumen S-65 - Bulk Bitumen and Shredded Plasticbr br brbrProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, using HM Plant attached with open pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, then transferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2 mixing well to form a uniforth thin layer of plastic Over-hot aggregate and adding hot bitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 br brCase - I By Manual Means br brbr(II) Bi umen (5-65)

5.12.A.3.2a : Seal Coat - Manual Means - Type C - Bitumen S-65 br Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 br A. By Manual Means :- Case - III : Type C br (II) Bitumen (S-65)

SIDE CONCRETING

od1210108/2021_2022 : Surface dressing of the ground including removing vegetation and in-equalitis not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m

75.8.1.1.A : Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)