Kochi Metro Rail Limited Tender

od124811/2018_2019 : Supply &; fixing of 600mm Triangular Cautionary Sign Board made out of retro reflective sheeting conforming to Class C, Type XI standards of ASTM D 4956-09 &; as per IRC 67-2012, fully covered over 2mm thick aluminium Sheet &; back support frame of 25mm x25mm x3mm MS angle and supported on a GI pipe pole NB 50mm nominal size, 3.6mm wall thickness, confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cmx45 cmx60 cm , 60 cm below ground level including providing anchor rods in foundation, painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, lettering, writing figures etc. complete as per the design. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.Size- 600mm Small/750mm Medium /900mm Normal/1200mm Large-Side

od126053/2018_2019 : Supply &; fixing of 300 x 900mm Object Hazard Marker Sign Board made out of retro reflective sheeting conforming to Class C, Type XI standards of ASTM D 4956-09 &; as per IRC 67-2012, fully covered over 2mm thick aluminium Sheet &; back support frame of 25mm x25mm x3mm MS angle and supported on a GI pipeNB 50mm 3.6mm wall thickness, confirming to IS 1239 firmly fixed 30 Cm above the ground by means of properly designed foundation with M 25 grade cement concrete 30cm x 30 cm x 45 cm, 45 cm below ground level including provision of anchor rods in foundation, painting all non-reflective faces with epoxy paint 2 coats over epoxy primer. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender Size- 300mm x 900mm- Object Hazard Marker 450mm x 900mm- Two Way Object Hazard Marker

od126572/2018_2019 : Supply and fixing of Advance direction / Flag type Direction / Reassurance / Place Identification / Street Name Signboard having area less than 0.9Sqm, made out of retro reflective sheeting conforming to Type XI standards of ASTM D 4956 -09 &; as per IRC 67-2012 specifications fixed over 2mm thick aluminium sheet and back support frame of 40 mm x 40 mm x 6 mm, supported on a GI pipe poles (two poles) 50mm NB confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, writing lettering, figures, arrows etc. complete as per the design. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the sheeting manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.

od126571/2018_2019 : Supply and fixing of Advance direction / Flag type Direction / Reassurance / Place Identification / Street Name Signboard having area more than 0.9Sqm, made out of retro reflective sheeting conforming to Type XI standards of ASTM D 4956- 09 &; as per IRC 67-2012 specifications fixed over 2mm thick aluminium sheet and back support frame of 40 mm x 40 mm x 6 mm, supported on a GI pipe poles (two poles) 50mm NB confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, writing lettering, figures, arrows etc. complete as per the design. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the sheeting manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.

od126575/2018_2019 : Supply &; fixing of 600 x 900mm Facility Information Sign Board made out of retro reflective sheeting conforming to Class C, Type XI standards of ASTM D 4956-09 &; as per IRC 67-2012, fully covered over 2mm thick aluminium Sheet &; back support frame of 25mm x25mm x3mm MS angle and supported on a GI pipe pole NB 50mm, 3.6mm wall thickness, confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cmx45 cmx60 cm , 60 cm below ground level including provision of anchor rods in foundation, painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, providing letters ,figures, logo of CSML etc complete as per the design.. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.

8.7.A : Providing and erecting overhead signs with retro reflectorised sign with 7 years warranty manufactured as per IRCbr67 made of Hign Intensity Micro Prismatic (Type IV ) grade sheeting fixed over corrosion resistant 2mm thick aluminium alloy sheet with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plansbrTruss and Vertical Support

od126573/2018_2019 : Providing and erecting Cantilever Overhead retro- reflectorised sign board on both sides with size of 4.80 x1.60m with 10 years warranty, manufactured as per IRC :67:2012 using Class C,Type XI ASTM D 4956-09 micro prismatic retro reflective sheeting and lettering and symbols by using overlay transparent film conforming to ASTM D 4959-09 on aluminium sheet, 2 mm thick vide clause 801.3,supported with mild steel angle back frame and necessary post structure as per approved design and erected firmly fixed to the ground by means of properly designed foundation with M 25 grade reinforced cement concrete including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, complete as per the design.. 10 years pre-qualification warranty for Type XI retro reflective sheeting from the manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.

od143114/2018_2019 : Supply and fixing of Landmark Sign/Tourism Destination Place Identification Sign board having area greater than 0.9Sqm, made out of retro reflective sheeting conforming to Class C,Type XI standards of ASTM D 4956-; 09 &; as per IRC 67-2012 specifications fixed over 2mm thick aluminium sheet and back support frame of 40 mm x 40 mm x 6 mm, supported on two (2) a GI pipe pole NB 50mm, 3.6 mm wall thickness confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level including provision of anchor rods in foundation painting all non-reflective faces with epoxy paint 2 coats over epoxy primer, complete as per the design. The signage will be printed by using RS technology Digital signage printer and laminated with high quality, Transparent UV protection lamination Overlay Film designed to protect finished signs with Warranty of 10 (Ten) years from the sheeting manufacturer at the time of supply of material with Matched Components System .10 years pre-qualification warranty for Type XI retro reflective sheeting &; Matched Component for Digital Printing to be obtained from the sheeting manufacturer &; a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report (as per table 14 of ASTM D 4956-09) for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.

3.13.1.B : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.br Ordinary soil - Mechanical Means - (Depth upto 3 m) br

12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

od126865/2018_2019 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M25 - Using Concrete Mixer icluding reinforcement