Kochi Metro Rail Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Developement Of Parks And Open Spaces In West Kochi Area Under Smart Cities Mission Package 3 (third Call)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_KMRL_516373_1Bid Award Id
ViewTender No
CSML/TOURISM/OS -PHASE 3/RFP/007-02Tender Authority
Kochi Metro Rail Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
29500
-
-
50.2.3.1
Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
14
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
3017.4
-
-
4.12
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
225
-
-
15.36
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
200
-
-
16.68
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
2900
-
-
16.70.1
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm
1345
-
-
16.70.2
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
30
-
-
30.2.33
Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
3039.2
-
-
od73016/2022_2023
Dismantling of existing light/electric poles and fitting whether required without damage and transportation and stacking of all materials to respective store of concerned department as per the instruction from engineer in charge.
280
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
378
-
-
13.1.2
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand)
430.68
-
-
16.1
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
480
-
-
50.6.1.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
103.85
-
-
50.6.1.4
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
16.73
-
-
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
8.18
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil
688.36
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
112.32
-
-
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
63
-
-
5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
78.87
-
-
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
32.57
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
261.92
-
-
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
80491.04
-
-
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
429.23
-
-
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
168.88
-
-
5.9.4
Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ)
15
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
Thermo - Mechanically Treated bars of grade Fe-500D or more
38764.48
-
-
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
60.45
-
-
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
21.11
-
-
9.165.1
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
24
-
-
9.96.2
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:250x16 mm
12
-
-
9.97.2
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
21
-
-
9.97.4
150x10 mm
21
-
-
10.25.2
Item Shifted to head 14 as item 14.74.Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
230
-
-
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
161
-
-
11.39
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours
White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand),
including grouting the joints with white cement and matching pigments etc., complete
28.07
-
-
12.22
Making Khurras 45x45 with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of near cement, rounding the edges, making and finishing the outlet complete
6
-
-
12.43.1
Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water
pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm
75
-
-
12.43.2
Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water
pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
30
-
-
12.42.5.2
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansionBend 87.5sup0/sup110 mm bend
6
-
-
12.42.6.2
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionShoe (Plain)110 mm Shoe
6
-
-
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600 x 600 mm.
79.53
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
288.4
-
-
11.20.3
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
19.44
-
-
13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)
150
-
-
13.2.2
15 mm cement plaster on the rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 fine sand)
294.03
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
4247.99
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
4024.04
-
-
13.47.1
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
542.49
-
-
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
2441.81
-
-
od92497/2022_2023
Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap
chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick
plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning
,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.
21
-
-
13.5.1
15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)
77.3
-
-
od103950/2022_2023
Supply and Installation of round wooden seating of varying heights and diameters from 30 cm to 60 cm using Thambakam wood or equivalent wood approved by Engineer in Charge. The cost is inclusive of wood polishing, labour charges and materials, complete as per tender drawings and specifications.
11.55
-
-
od113915/2022_2023
Supplying and fixing Rope Climber with following specefication:Length:6ft, Width :-ft ,Height7ft Age Group: 3-15 Yrs:Area Required :10Ft X 5Ft Specification: Rope Climber(7ft x 6ft): Non- Toxic:Weather proof :Attractive :Colorfull :Durable :Elegance Look : Completely Safe;including cost of installation all complete as per the direction of EICbr
1
-
-
od113916/2022_2023
Supplying and fixing Lilly pad 5 feet/Hip Hop with following specefications; Age Group: 3-15 yrs: 5 nos :Dimensions: L(5ft) x W (1.5Ft) x H (2 Ft):Safe Area :7 x4 ft :LLDPE is highly durable. High tensilestrength. It is made by eco-friendly material, anti-static and anti-ultraviolet and non-toxic.All the metal parts are made of galvanized steel pipes with diameter of 114mm,60mm, 48mm, 38mm, 22mm and wall thickness of 2.2mm.High quality polyester powder coating,including cost of installation all complete as per the direction of EICbr
3
-
-
od113917/2022_2023
Supplying and fixing Balancing block with following specefications;Age Group: 3-15 yrs: Dimensions: L(7ft) x W (2Ft) x H (7 Ft):Safe Area :8 x 2 ft :LLDPE is highly durable. High tensile strength. It is made by eco-friendly material, anti-static and anti-ultraviolet and non-toxic.All the metal parts are made of galvanized steel pipes with diameter of 114mm, 60mm, 48mm, 38mm, 22mm and wall thickness of 2.2mm.High quality polyester powder coating,ncluding cost of installation all complete as per the direction of EICbr
2
-
-
od113918/2022_2023
Supplying and fixing Straight Climber/Scramler Age Group: 3-15 yrs:Dimensions: L(7ft) x W (3.5Ft) x H (7Ft): Safe Area : 12 x5 ft:High tensile strength. It is made by eco-friendly material, anti-static and antiultraviolet and non-toxic:All the metal parts are made of galvanized steel pipes with diameter of 114mm, 60mm, 48mm, 38mm, 22mm and wall thickness of 2.2mm High quality polyester powder coating,including cost of installation all complete as per the direction of EICbr
1
-
-
od113919/2022_2023
"Supplying and fixing Seesaw simple with following specefications ;Age Group: 3-12 yrs;Dimensions: L(7ft) x H (2.5ft) x W (1.5ft);Safe Area :8 x4 ft; Seats and slides are made with LLDPE Material:LLDPE is highly durable. High tensile strength. It is made by eco-friendly material, anti- static and ant-ultraviolet and non-toxic.All the metal parts are made of galvanized steel pipes with diameter of 114mm,60mm, 48mm, 38mm, 22mm and wallbrthickness of 2.2mm.High quality polyester powder coating,including cost of installation all complete as per the direction of EIC"br
2
-
-
od113920/2022_2023
"Supplying and fixing Seesaw-single 8 ft with following specefications;Model No: SS 02 ;Age Group: 3-12 yrs ;Dimensions 7 Ft x 2 Ft ;Safety Area: 10Ft x 5Ft ;Seats and slides are made with LLDPE Material:LLDPE is highly durable. High tensile strength. It is made by eco-friendly material, anti-static and anti-ultraviolet and non-toxic .All the metal parts are made of galvanized steel pipes with diameter of 114mm, 60mm, 48mm, 38mm, 22mm and wallbrthickness of 2.2mm,including cost of installation all complete as per the direction of EIC"br
3
-
-
od113921/2022_2023
Supplying and fixing Hubber slide 11 ft with following specefications; Length:11ft ; Height: 6.2ft ; Age Group :3-12 Yrs.Area Required :22Ft x 6FT .Seats and slides are made with LLDPE.Material: LLDPE is highly durable. High tensile strength. It is made by eco-friendly material, ant-static and anti-ultraviolet and non-toxic.All the metal parts are made of galvanized steel pipes with diameter of 114mm, 60mm, 48mm, 38mm, 22mm and wall thickness of 2.2mm.High quality polyester powder coating,including cost of installation all complete as per the direction of EICbr
2
-
-
od113922/2022_2023
Supplying and fixing straight slide with following specifications ;Length:7ft , Height: 4.5ft :Age Group :3-12 Yrs. Area Required :12Ft x 6FT :Seats and slides are made with LLDPE Material: LLDPE is highly durable. ; High tensile strength. It is made by eco-friendly material, antistatic and anti-ultraviolet and nontoxic. All the metal parts are made ofgalvanized steel pipes with diameter of 114mm, 60mm, 48mm, 38mm, 22mm and wall thickness of 2.2mm.High quality polyester powder coating; including cost of installation complete as per the direction of EICbr
1
-
-
od113923/2022_2023
Supplying and fixing prime swing set with tyre seats with following specefications as L:9ft x H: 7.5 ft x W:4ft, with durable child friendly material, high tensile strength; anti-static & anti-ultraviolet non-toxic powder coated.Safe LLDPE Rotational Molding Linear low density polyethylene (LLDPE)a petroleum based plastic commonly used in rotatinal molding.All the main columns are made of galvanized steel pipes with diameter of 114mm and wall thickness of 2.5mm.Meets the requirements of EU standards. All the platforms are shaped by piercing 2.5mmthick cold-roll steel sheet, with bores of diameter 6mm. The quality and technical standard are conforming to the European EN1176 standard. All the metal parts are made of galvanized steel pipes with diameter of 60mm, 48mm, 38mm, 32mm, 28mm and wall thickness of 2.5mm. Quality and technical standard meets the requirements of EU standards.Including cost of installation all complete as per the direction of EICbr
4
-
-
od113999/2022_2023
Supplying and fixing Multi play station with following specefication :Product Dimension : L : 25ft x W : 16ft x H :12ft :Safe Area : L : 28ft x W : 24ft; which includes a pair of swing, a slide etc .The material shall be Non - Toxic;Weather proof;Attractive; Colorfull;Durable;Elegance Look;Completely Safe:including cost of installation all complete as per the direction of EICbr
1
-
-
od114000/2022_2023
Supplying and fixing Multi play station with following specefication :Product Dimension : L : 18ft x W : 11ft x H :10ft:Safe Area : L : 24ft x W : 15ft;which includes a pair of swing, a slide and one scrambler.The material shall be Non - Toxic;Weather proof;Attractive; Colorfull;Durable;Elegance Look;Completely Safe:including cost of installation all complete as per the direction of EICbr
1
-
-
od114001/2022_2023
"Supplying and fixing Rope Climber wall with following specefications Length:12 ft Width :-ft
Height7ft.Age Group : 3-15 Yrs.Area Required :12Ft X 6FtbrSpecification:Non- Toxic:Weather proof :Attractive :Colorfull : Durable : Elegance Look : Completely Safe:including cost of installation all complete as per the direction of EIC"br
1
-
-
od113078/2022_2023
Supplying and fixing abacus with steel railings and multi colour beads of size 1.50m length and 1.20m hieght and placing in postion as per the architectural drawings,all complete and as per the direction of EICbr
1
-
-
od112768/2022_2023
Supplying, erecting and commisioning of log jam play item for kids made using hard wood ,as per the architectural drawings, all complete as per the direction of EICbr
1
-
-
od105080/2022_2023
Supply & Fixing of STEEL SEE SAW - Metal: Tubes made of 90x90mm galvanised steel square shape, ensuring robustness and durability. The seats are made from a 13mm thick compact material (HPL). Robust in construction, it offers excellent resistance to weathering and vandalism. The springs are made from Grade 35SCD6 steel, shot blasted, stress relieved, zinc coated and finished with two coats of epoxy polyester powder. Proludic have patented an exceptionally strong and secure polyamide fixing for the spring, ensuring a long product life. The handles are made of galvanised, painted steel. The stainless steel fixings are protected by polyamide anti-vandalism caps. The rate is including the cost of concrete footing , anchor bolt etc complete.
1
-
-
od105233/2022_2023
Supply and fixing of STEEL SWINGS -Metal :- All tubular steel 0f 2.5mm thickness are galvanized and zinc dipped. The support legs are made from 60mm galvanised steel. The horizontal beam is manufactured from 89mm diameter galvanised steel. The swing bearings are made of stainless steel. The coloured panels are made from a 13mm thick compact material (HPL). Robust in construction, it offers excellent resistance to weathering and vandalism. The swing seats are made of shock absorbing moulded honeycomb rubber. The swing chains are made of stainless steel. The seat fixing brackets are made of 10mm stainless steel wire. PVC sliding rings are fitted to limit the wear of the metal parts over time. The rings are accessed by a vandal proof, stainless steel shackle. The fixings are made of stainless or plated steel and protected by anti-vandalism polyamide caps. The rate is including the cost of concrete footing , anchor bolt etc complete
2
-
-
od105243/2022_2023
Supply & Fixing of STEEL SLIDES - Metal: The sliding surface is made of stainless steel 2mm thick, which are shaped, bent and rolled from one piece. The coloured panels are made from a 13mm thick compact material (HPL). Robust in construction, it offers excellent resistance to weathering and vandalism. The tubes are made of stainless steel, diameter 40mm, guaranteeing lasting durability and reliability of the equipment. The platforms are made from a textured and non-slip compact material (HPL), 12.5mm thick. The fixings are made of stainless or plated steel and protected by anti-vandalism polyamide caps. The rate is including the cost of concrete footing , anchor bolt etc complete
1
-
-
od105305/2022_2023
Supply & installation of AIRWALKER - The framework of the workstations is made from 3.5 to 4mm thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides high levels of durability, notably in coastal locations. The handles are made from elasticated EDPM, offering both durability and fire resistance. The material retains both its shape and feel across a wide temperature range -55°C à 120°C. The stainless steel waterproof bearing has been subjected to tests involving over 10,000 hours of constant use. The foot supports are made from low density roto-moulded polyethylene (LDPE). This material has been chosen both for its hard wearing properties and its resistance to ultra violet rays. The supports have a textured finish in order to provide grip and reduce the appearance of scuff marks. The rate is including the cost of concrete footing , anchor bolt etc complete.
1
-
-
od105306/2022_2023
Supply & Installtion of Elliptical Trainer - The framework of the workstations is made from 3.5 to 4mm thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides high levels of durability, notably in coastal locations. The handles are made from elasticated EDPM, offering both durability and fire resistance. The material retains both its shape and feel across a wide temperature range -55°C à 120°C.The stainless steel waterproof bearing has been subjected to tests involving over 10,000 hours of constant use. The foot supports are made from low density roto-moulded polyethylene (LDPE). This material has been chosen both for its hard wearing properties and its resistance to ultra violet rays. The supports have a textured finish in order to provide grip and reduce the appearance of scuff marks. The discs are made of painted steel. The rate is including the cost of concrete footing , anchor bolt etc complete
1
-
-
od105307/2022_2023
Supply & Installtion of Hydralic Stepper- The framework of the workstations is made from 3.5 to 4mm thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides high levels of durability, notably in coastal locations. The foot supports are made from low density rotomoulded polyethylene (LDPE). This material has been chosen both for its hard wearing properties and its resistance to ultra violet rays. The supports have a textured finish in order to provide grip and reduce the appearance of scuff marks. The handles are made from elasticated EDPM, offering both durability and fire resistance. The material retains both its shape and feel across a wide temperature range -55°C à 120°C. The stainless steel waterproof bearing has been subjected to tests involving over 10,000 hours of constant use. The hydraulic oil piston is made up of elements manufactured from chrome, aluminium and stainless steel. Users can adjust the resistance from just a few kilogrammes up to as much as 60kg on certain machines. The rate is including the cost of concrete footing , anchor bolt etc complete
1
-
-
od105322/2022_2023
Supply & installation of Spinning Bike - The framework of the workstations is made from 3.5 to 4mm thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides high levels of durability, notably in coastal locations. The seat is made from a polyurethane compound, providing a soft and ergonomic surface for the user, similar to those found in gym settings. The element conform to the SGS TB117 fire test requirements. The handles are made from elasticated EDPM, offering both durability and fire resistance. The material retains both its shape and feel across a wide temperature range -55°C à 120°C. The stainless steel waterproof bearing has been subjected to tests involving over 10,000 hours of constant use. The rate is including the cost of concrete footing , anchor bolt etc complete.
1
-
-
od105325/2022_2023
Supply & installation of Shoulder Wheel The disc is made of painted steel. The rate is including the cost
of concrete footing , anchor bolt etc complete.
1
-
-
od105326/2022_2023
Supply & Installtion of Hydralic Butterfly- The framework of the workstations is made from 3.5 to 4mm
thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides
high levels of durability, notably in coastal locations. The seat and back support are made from a
polyurethane compound, providing a soft and ergonomic surface for the user, similar to those found in
gym settings. The elements conform to the SGS TB117 fire test requirements. The handles are made
from elasticated EDPM, offering both durability and fire resistance. The material retains both its shape
and feel across a wide temperature range -55°C à 120°C. The stainless steel waterproof bearing has
been subjected to tests involving over 10,000 hours of constant use. The hydraulic oil piston is made up
of elements manufactured from chrome, aluminium and stainless steel. Users can adjust the resistance
from just a few kilogrammes up to as much as 60kg on certain machines. The rate is including the cost of
concrete footing , anchor bolt etc complete.
1
-
-
od112584/2022_2023
Providing and supplying random rubble stones of varying shapes and sizes and placing it in position as
per the architectural drawings,all complete and as per the direction of EICbr
80
-
-
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
621
-
-
50.17.1.5
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
12
-
-
50.18.7.6.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
30
-
-
50.18.9.8.2
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2
60
-
-
50.18.9.9.2
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
60
-
-
50.18.9.19.2
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
18
-
-
50.18.9.10.1
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
30
-
-
50.18.9.18.2
Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
120
-
-
50.18.9.21.3
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow
15
-
-
50.18.9.21.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend
6
-
-
50.18.9.21.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee
21
-
-
50.18.9.22.3
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow
9
-
-
50.18.9.22.6
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
15
-
-
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
15
-
-
17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
15
-
-
17.34.1
Providing and fixing toilet paper holder:C.P. brass
12
-
-
17.80
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge.
6
-
-
17.3.1
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
12
-
-
17.7.4
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
15
-
-
18.7.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
20 mm nominal outer dia pipes
45
-
-
18.7.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
25 mm nominal outer dia pipes
45
-
-
18.7.4
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
32 mm nominal outer dia pipes
30
-
-
18.7.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
40 mm nominal outer dia pipes
30
-
-
18.7.6
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
50 mm nominal outer dia pipes
15
-
-
18.8.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
20 mm nominal outer dia pipes
60
-
-
18.18.1
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:15 mm nominal bore
6
-
-
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
-
18.50.1
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
12
-
-
18.17.3
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
6
-
-
18.21.2.1
Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal
bore
27
-
-
18.49.1
Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931.15 mm nominal bore
3
-
-
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
33
-
-
19.3.1
Providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:100 mm diameter S.W. pipe
60
-
-
19.2.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round S.W. pipes including bed concrete as per standard design:150 mm diameter S.W.pipe
30
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
232.18
-
-
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
298.9
-
-
od92077/2022_2023
supplying and errecting RCC bio digester Construction of 20000 Ltrs of RCC Tank with Four Chambers, Soak Pit and Trap with manhole (Use of 200 Persosns)
3
-
-
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and
1.20 m long complete as per standard design
6
-
-
50.12.2.4
Providing & fixing Poly carbonate multi wall plain sheet 6 mm thick as approved by the Engineer in
charge and should be supplied in a single length of 12m or as decide by the Engineer in charge. The
sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required
48
-
-
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
150
-
-
od93839/2022_2023
Supplying and fixing FRP manhole cover with frame for manholes:br600x450 mm ( heavy duty)
3
-
-
8.10.2
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep
and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and
embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished
smooth.Granite Stone of approved shade
1.8
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
2205
-
-
5.1.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:
1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
254.1
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
4157.5
-
-
16.83
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
1484.85
-
-
16.82
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
1196.22
-
-
15.2.2
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.
Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)
618.04
-
-
15.3
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
45
-
-
15.7.3
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
In lime mortar
51
-
-
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
404.38
-
-
15.18
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
120
-
-
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
20
-
-
15.9.2
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:
In cement mortar
10
-
-
15.6
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
1020
-
-
14.82
Dismantling W.C. Pan of all sizes including disposal of dismantled materialsi/c malba all complete as per directions of Engineer-in-Charge
1
-
-
15.28.1
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. sheet
49
-
-
15.12.1
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
2
-
-
15.23.1
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
28
-
-
od106508/2022_2023
Shifting of E toilet building and tank, other accumulated scraps, sheets, tar barrels etcti waste yard forclearing the site
1
-
-
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
37
-
-
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
745.5
-
-
5.4
Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
25.67
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
745.5
-
-
5.35
Add for using extra cement in the items of design mix over and above the specified cement content therein
5
-
-
5.5
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15 up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement :1.5 coarse sand(Zone III) : 3 graded stone aggregate 20 mm nominal size)
3.36
-
-
50.6.1.1
Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10
-
-
od103691/2022_2023
Providing and laying at or near ground level granite stone kerb stone of ,30x15x30 cm in position to therequired line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , includingmaking joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-incharge( length of finished kerb edging shall be measured for payment ). ( kerb stone shall be approvedby Engineer-in-Charge)
934.3
-
-
od103825/2022_2023
Providing and fixing 30x30 x7.50 cm Granite stone block hand cut and chisel dressed on top, for pavingin floors, drains etc. laid over 75 mm thick 6 mm aggregate joints filled with red earth, sand and manureplanting doob grass, watering etc. , including rubbing, curing, etc. complete at all levels. complete as perdirection of engineer- in charge
1450
-
-
50.6.2.3
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
0.9
-
-
od93135/2022_2023 Supplying and fixing granite stone slab 50 mm thick with inscription writting in recessed style inluding conveying and errecting in position on cement concrete base as per direction of Engineer in Charge.(the quality of granite slab to be approved by the Engineer in charge).The cost of foundation to be paid seperately.
5
-
-
13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
4728.08
-
-
13.111.1 Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
3002.09
-
-
14.17
Raking out joints in lime or cement mortar and preparing the surface for re- pointing or re plastering, including disposal of rubbish to the dumping ground within 50 metres lead
77.35
-
-
14.1.1
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:
With cement mortar 1:4 ( 1 cement : fine sand)
125
-
-
od85571/2022_2023
Supply, installation, testing & Commissioning CLASSIC MERRY GO ROUND having dimensions 1.5mX1.5m. The FRP parts have a minimum thickness of 5mm and are mixed with UV pigments to required colors. All metal pipes are hot dipped galvanized piles with GI.
(Product Code: FRMGR 105)
2
-
-
od85572/2022_2023
Supply, installation, testing & Commissioning ORBIT FOUR-SEATER SWING having dimensions 2mX1.6m. The FRP parts have a minimum thickness of 5mm and are mixed with UV pigments to required colors. All metal pipes are hot dipped galvanized piles with GI.
(Product Code: FRSC 106)
3
-
-
od85573/2022_2023
Supply, installation, testing & Commissioning SHARK RIDER having dimensions 0.78mX0.54m. The FRP parts have a minimum thickness of 5mm and are mixed with UV pigments to required colors. All metal pipes are hot dipped galvanized piles with GI.
(Product Code: FRSR 005)
5
-
-
od85570/2022_2023
Supply, installation, testing & Commissioning ROCKER DUCK having dimensions 0.62mX0.5m. The FRP parts have a minimum thickness of 5mm and are mixed with UV pigments to required colors. All metal pipes are hot dipped galvanized piles with GI.
(Product Code: FRSR 001)
4
-
-
od105304/2022_2023
Supply & installation of Hydraulic Rowing Machine (Legs) -The framework of the workstations is made from 3.5 to 4mm thick, hot-dipped galvanised steel, protected by a polyester powder coated finish. This treatment provides high levels of durability, notably in coastal locations. The seat and back support are made from a polyurethane compound, providing a soft and ergonomic surface for the user, similar to those found in gym settings. The elements conform to the SGS TB117 fire test requirements. The stainless steel waterproof bearing has been subjected to tests involving over 10,000 hours of constant use. The hydraulic oil piston is made up of elements manufactured from chrome, aluminium and stainless steel. Users can adjust the resistance from just a few kilogrammes up to as much as 60kg on certain machines.. The rate is including the cost of concrete footing , anchor bolt etc complete
1
-
-
30.2.2
Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
2586.94
-
-
30.2.3
Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment)
1140.45
-
-
30.2.5
Rough dressing the trenched ground including breaking clods.
5699.74
-
-
30.2.7
Fine dressing of the ground
6139.74
-
-
30.2.8
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
1937.35
-
-
30.2.9
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
2581.34
-
-
30.2.12
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
6556.08
-
-
30.2.14.3
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
Holes 60 cm dia, and 60 cm deep
3
-
-
30.2.14.4
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
Holes 45 cm dia, and 45 cm deep
80
-
-
30.2.15.1
Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete:With common burnt clay F.P.S. (non modular) bricks of class designation 5
3
-
-
30.2.25
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
382.05
-
-
30.2.56
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.
5919.74
-
-
30.2.57.1
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )
Cost of plantation per trees plants (for 100 nos.=427.45/100)
53
-
-
30.2.57.2
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable materials as per direction of officer in charge (excluding cast of plant & water )
Cost of plantation per Shrubs plants (for 200 nos.=427.45/200)
40
-
-
od302729/2022_2023
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 Cum per 100 Metres and supplying and planting hedge plants at 30 cm apart.Maintenance of hedge for one year - Lorapetalum Plants (Red)
290
-
-
Providing & laying buffallo grass turf with existing ground prepared with proper level and ramming with tools wooden the the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.
6200
-
-
od28837/2022_2023 Supply and stacking of plant Caesalpinia pulcherrima species of height
45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.Each
3
-
-
od28243/2022_2023 Supplying and fixing of DUST BIN. External bin made of FRP material moulded with 3mm with Granite finish, Inner liner of FRP material to facilitate removal of garbage, Top lid made of FRP with 3mm thick. Chain to tie top cover with body of garbage bin. Approximately 3 feet or nearby height.
22
-
-
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2484.49
-
-
19.27.1
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 ( 1 cement: 4 coarse sand) including 500x450 mm pre- cast R.C.C. horizontal grating with frame complete as per standard design:
With common burnt clay F.P.S(non modular) bricks of class designation 7.5
15
-
-
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
22.5
-
-
od29962/2022_2023 Removing and relaying existing cobble stones of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)
374
-
-
od80871/2022_2023
Providing and fixing 30cm X 30cm X 7.5cm flamed Granite stone block hand-cut and chisel dressed on top, for paving in floors, drains, etc., laid over 50mm thick, 6mm aggregate with joints 10mm wide filled with C: M 1:4 ( 1 Cement: 4 Coarse Sand) including ruled pointing, etc. complete as per direction of engineer- in charge.
93.5
-
-
od105691/2022_2023
Providing and fixing 60cm X 60cm X 7.5cm flamed Granite stone block hand-cut and chisel dressed on top, for paving in floors, drains, etc., laid over 50mm thick, 6mm aggregate with joints 10mm wide filled with C: M 1:4 ( 1 Cement: 4 Coarse Sand) including ruled pointing, etc. complete as per direction of engineer- in charge
350
-
-
od81077/2022_2023 Providing and fixing 40mm thick machine cut, rough flamed finish, shell white colour Granite for stone seater/copping and similar locations, of size 60x30cm, laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, etc. complete at all levels.
Area of slab over 0.50 sqm
8
-
-
od103851/2022_2023
Providing and fixing of 20mm thick machine cut, flamed finish, shell white colour Granite for wall cladding and similar locations, of size 60x45cm, laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, etc. complete at all levels.brArea of slab over 0.50 sqm
1151.89
-
-
od109961/2022_2023
Providing and fixing natural granite stone machine cut, non-water absorbing with dimension 36 inch length, 12 inch width and 45 to 50mm thickness with approved make and design,all complete, as per the direction of EIC br
90
-
-
od109994/2022_2023
Providing and fixing synthetic tatch roofing including tatch ridge and starter with 2mm waterproofing installed by torching ,all complete as per the direction of EICbr
62.8
-
-
od29998/2022_2023
Supplying and fixing granite stone bollards 150 mm dia height 1100 mm fixed in cement concrete 1:2:4 ,900 mm above ground , (the size ,finish and designs of bollards to be approved by engineer in charge )
35
-
-
15.19 Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
865
-
-
30.2.13 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
430
-
-
od31723/2022_2023 Supplying and Fixing Granite bench of size 1.5m long , 45cm high and 70cm width with back support including conveying labour charges etc complete
7
-
-
od31729/2022_2023
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart. Tabernaemontana divaricata (Chandni double) Maintenance of hedge for one year -
200
-
-
od31730/2022_2023 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart. Furcaira variegated
Maintenance of hedge for one year -
50
-
-
od31732/2022_2023 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart. Duranta Golden plant
Maintenance of hedge for one year -
200
-
-
od31733/2022_2023 Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart. Hamelia patens
Maintenance of hedge for one year -
50
-
-
od112436/2022_2023
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart. Plant ClarkiabrbrMaintenance of hedge for one year
200
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:
Edges of slabs and breaks in floors and walls
Under 20 cm wide
98.7
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
70.56
-
-
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.
Pre- laminated particle board with decorative lamination on both side
28.99
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness
23.25
-
-
21.4.1
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming
to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door
weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making
good the same matching to the existing floor finishing and cover plates with brass pivot and single piece
M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With
stainless steel cover plate minimun 1.25 mm thickness
12
-
-
21.11.2
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality
with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-
Charge complete.255 x 19 mm
45
-
-
21.13
Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
9
-
-
21.15.2
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
45
-
-
21.16.2
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium
24
-
-
21.17
Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
93
-
-
21.19.1
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structuralnon sag elastomeric PU sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete,complying to ASTM C920, DIN 18540-F & ISO 11600Upto 5 mm depth and 5 mm width
48.3
-
-
22.14.2
Grading roof for water proofing treatment with:Cement mortar 1:3 ( 1 cement : 3 coarse sand)
7.06
-
-
9.1.3
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated Hollock wood
0.98
-
-
od92496/2022_2023
OD Derived :Providing , fixing , testing and commissioning pvc single inlet/ multy inlet(110x75x50x50x50)
floor trap of self cleansing design with or without vent arm complete, including cost of masonry or concrete supports cutting and making good the walls and floors where ever requiredbr
21
-
-
ELECTRICAL WORKS
-
-
-
od79327/2022_2023
Operation and Maintenance of landscaping works, street lighting system including maintenance of Civil and Electrical works like Landscaping, light fixtures, CCMS panel, communication charges, panel maintenance, including labour, materials, cloud hosting charges etc for 3 years after Operational Acceptance
1
-
-
od74813/2022_2023
Street Light Management System Software
Development, Installation, testing, implementation and integration of Street light Management System (LMS). Lighting Control System should be deployed to manage the entire Street Lighting System under the scope of the project. The solution should be provided a SaaS model. Fool proof communication is to be provided between luminaire and Light Management System (LMS). This could be using any or multiple form of communication networks, like LoRa, RF, GSM, etc. All group controls should have redundant communication system. System should exercise complete control over the streetlights and thus be able to monitor their functions/ operations such as Scheduling, controlling Dimming, etc.
The item covers all the necessary hardware and software required for the interface of LMS with the command and control centre as per the technical specification requirements.
1
-
-
90.4.10
Conveyance, installation, testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan
4
-
-
Supply and installation testing and commis-sioning of 500W Led flood Light (with Led makes Cree/ Niche/ Osram/ Reputed make) with Toughened Glass and secondary lenses with more than 130 Lum/W efficacy using high power led of minimum 2-3W per led integrated Peanut lens. The luminaire should have 20Kv Surge protection with IP66, CCT 4000-6000K, THD less than 10%, PF more than 0.95, CRI greater than 70 with IK 08 Protection. The light fixture shall be tested for 500 hours salt spray test for non-corrosive ADC 12 Alloy diecast Alumini-um housing (The test certificate for LM 79/ Salt spray should be third party Certificate from NABL Accredited lab.) The drive should be compactable for Dimming and should have separate compartment for mounting. (Note: Replacing of conventional lights in existing stadium high mast)
26
-
-
90.4.6 Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.
2
-
-
90.4.8 Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.
4
-
-
od74823/2022_2023 Supply of 400mm sweep, energy efficient wall fans with mounting bracket and all other accessories for fully functioning of system working on 230V/240V, 50 Hz as required. (Make: Atomberg, Crompton or equivalent approved make)
2
-
-
od74822/2022_2023
Supply of 250mm sweep Exhaust Fan suitable for operation on single phase 230V ,50Hz AC supply complete with all accessories as required complete.(Make Atomberg, Crompton or equivalent approved make)
21
-
-
1.41
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
62
-
-
1.34
Supplying and fixing brass batten/ angle holder including connection etc. as required.
23
-
-
1.33
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
79
-
-
od74821/2022_2023 Supply of 5W LED Bulb of approved make
20
-
-
od74820/2022_2023
Supply of 1 x 20 W LED Tube Batten of approved make
42
-
-
2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
1
-
-
2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
1
-
-
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
30
-
-
2.10.2
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole and netural
5
-
-
2.10.3
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
6
-
-
2.3.1
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
6 way, Double doorv
4
-
-
2.14.1
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
2.16
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
6
-
-
2.3.3
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
12 way, Double door
2
-
-
1.27.6
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
12 Module (200mmX150mm)
10
-
-
1.27.3
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
4 Module (125mmX75mm)
9
-
-
1.27.5
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular
switches in recess etc as required.8 Module (125mmX125mm)
6
-
-
1.24.6
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Telephone socket outlet
1
-
-
1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6 pin 15/16 amp socket outlet
9
-
-
1.24.4
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3 pin 5/6 amp socket outlet
9
-
-
1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
15/16 amp switch
9
-
-
1.24.1
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch
41
-
-
1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2x1.5 sq.mm + 1x1.5 sq.mm earth wire
1330
-
-
1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
600
-
-
1.14.3
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
-
-
1.7.3
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required
2x4 sq.mm + 1x4 sq.mm earth wire
150
-
-
1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
101
-
-
1.55.3
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without
independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in
surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable etc as required. Group C
45
-
-
7.1.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc
as required.Upto 35 sq. mm
300
-
-
90.12.1.2
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of
1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling
the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core
6 sq mm
300
-
-
od94996/2022_2023
Supply, Installation, Testing & Commissioning of 1 HP monoblock pump with 3C x 4 sq.mm, 1.1 kV flexible copper cable of necessery length and all accessories complete as instructed by engineer in charge.
6
-
-
od63106/2022_2023
Lighting Control PANEL FOR GROUP CONTROL: Supplying, unloading at site, shifting to site, assembling, levelling, grouting, erecting, earthing Testing, & Commissioning of Street light Feeder Pillar boxes as per tender specification. The feeder pillar shall be for group control of LED street lights in Access Road and High Mast system with all hard wares for power, control and communication devices and required software. It Shall be a GPRS/GSM/ RF / LORA/ based remote street light monitoring system with capacity for self - protection from short circuit, over voltage and anti-theft alert, one contactor for each phase is to be provided. Device capability for scheduling the on/off timings of lighting control switchgears based on the available sun-rise and sunset. Special emergency on/off facility with wireless control. System capability to capture and provide all electrical parametres at variable time intervals and live data collection timings. Smart Energy metre with ISI marking accuracy class specified by KSEB for measuring energy consumption.
3
-
-
14.15.1
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
63 mm· dia (OD-63 mm & ID-51 mm nominal)
1000
-
-
od80556/2022_2023
Supply, Installation, Testing and Comissioning
Nickel coated Copper bonded electrode made from low carbon steel. Earth rods and molecularly bonded with 99.9 % pure electrolytic copper with 250 micron coating, 17.2 mm dia with pressed contact including stainless steel nut, bolts and washers.Copper bonded rod of size (17.2mmx2000mm) with 1 nos chemical bag of 25 kg. with all accessories. Approximate weight of copper electrode is 5.62 kg. The earth rod should be properly covered with UV resistant earth pit Chamber of top 300mm, bottom 400mm and height 280mm complied to IEC62561-5:2017
30
-
-
5.2
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
15
-
-
od80555/2022_2023 Boring of earth pit ( 0-15m ) suitable for the earthing to be done as per the dimension of earth rod and it should be capable of holding 25kg electrafill compound.
60
-
-
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
75
-
-
5.7
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
1420
-
-
9.1.32
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq. mm (25mm)
31
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2 X 6 sq. mm (19mm)
136
-
-
9.1.2
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2 X 10 sq. mm (19mm)
31
-
-
od80557/2022_2023
Supplying and making end termination with copper lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1KV grade as required for input and output of the cable 4 X 4 Sq.mm in flush terminal box of pole.
180
-
-
od63098/2022_2023 Supplying and making end termination with light of 3x1.5sqmm copper wire using proper lugs, ferrules etc on both ends of the cable.
420
-
-
1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.
3 X 1.5 sq.mm
1350
-
-
90.12.5.38 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
4 core 4 sq mm
2400
-
-
90.12.5.40 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
4 core 10 sq mm
500
-
-
90.12.5.3 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
2 core 10 sq mm
300
-
-
90.12.39.3
Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
2 core 10 sq mm
200
-
-
90.12.39.2 Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
2 core 6 sq mm
1400
-
-
90.6.5.11
Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm
1000
-
-
90.6.5.13
Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm
300
-
-
od76023/2022_2023
Supply, Installation,Testing & Commissioning of LED post top lantern having 40W with Diecast aluminium body and polycarbonate diffuser with spun aluminium reflector . The product should be IP65 protection. Make of led to be Cree/ Osram/ Niche LED Lifetime @L70 50000 hours @Ts 85°C. LM 80 report & TM 21 calculation should be submitted to support the same.Internal Surge protection of 4KV should be provided , THD less than 10, PF more than 0.9. The internal wiring should be of Teflon coated multistrand copperwire and the main terminal wires 3way 10 amps suitable for 2.5sq incoming cable. The housing for the led fixture should be of Aluminium alloy powder coated in graphite Grey colour with reflector in anodized aluminium with sand blast patten LM79 report also should be submitted from UL Authorised Laboratory. Sample should be submitted for approval from concerned engineer-in charge.
40
-
-
od76080/2022_2023 Supply and Installation of 3M-4M HEIGHT ARCHITECTURAL POST TOP POLE ALONG WITH ORNOMENTAL CAST in Aluminium The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the in-built box should have a flush door of suitable size. The bottom thickness of the pole should be more than 110mm dia and top portion should be of more than 75 mm.The poles should be finished with Pu painting shade as per customer requirement. 3 layer coating(coating thickness-70 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint
40
-
-
od80710/2022_2023 Supply, Installation, Testing and Commissioning of 5M octagonal street light pole and All in one Led solar Street light fixtures . The should be made up of hot dipped galvanization with 3mm sheet thickness, The pole should have a flushed door at the bottom with inbuilt control box , proper cutout and provision for mounting DP MCB, four pole connector for easy loop in loop out . The base plate of the pole should be 130mm with top dia of 70mm and base thickness 12mm. All in one integrat-ed solar street light , Led driver , PIR sensor , inter connecting cables and pole mounting ar-rangement having a wattage of 25W with 45WP Monocrystaline solar panel ,120 lm/w LiFePO4 battery and the driver should have more than 90% efficacy . The Typical corre-lated colour temperature should be of 6000K(+/-400K) with CRI more than 70. The luminaire should be housed in IK 08 impact resistance certified Aluminium with polycar-obonate lens cover.
3
-
-
90.15.4.5 Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
42
-
-
90.15.1.1
Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters
7
-
-
1.50.1
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.
Upto 450 mm sweep
17
-
-
od76648/2022_2023 Supply, installation, testing and commissioning of 8-10 W Focus Light 9W High efficiency LED landscape luminaires with high efficiency LED driver, designed to provide directional spot light. The luminaiare is made up of pressure die cast aluminium housing and with flat glass protector and powder coated grey finish. The luminare characterized by high luminous efficiency with luminaire efficacy of 70Lm/W. Ingress protection IP 66 to prevent from dust & moisture. Also can change/adjust luminaire at desired angle using spike or knuckle mounting.The product complies with the essential safety requirements of the applicable BIS standard.Colour Rendering Index(CCT) 3000K as per ANSI standard. Ambient temperature ranges: -10 to +40°C a with interenal surge protection of 4kV, CRI 80.Power Factor 0.90, THD 15%, 30000 hours @L70. Rated voltage 240Vac, 50Hz.
4
-
-
od77110/2022_2023 Supply, Installation, Testing and commissioning of 9W LED Bollard of 600mm length with Cylindrical opal acrylic diffuser with seamless GI pipe bottom housing the control gear .The luminaire shall have ingress protection of IP 65. The Luminaire should have min luminaire efficacy of ≥50 lm/W and system lumen o/p of min. 450 Lumen,CRI 70,with CCT 3000K±300K. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current and at 105 Deg C Ambient temperature.The BIS certified driver shall be of Integral type Constant Current topology with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 275V(nominal rated voltage – 240V), I/P frequency range of 50-60Hz with 4.5 KV built-in surge protection in differential mode and with power factor ≥ 0.90 with total harmonic distortion (THD) of less than 15%.
118
-
-
11.3.1 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Above 4.5 metre and upto 6.5 metre
6
-
-
od80552/2022_2023 Supplying & fixing of 160 W Mixer Amplifier including all accessories of approved make
2
-
-
od80551/2022_2023 Supplying and fixing of 25 W outdoor type Speaker with matching transformer including all accessories of approved make
6
-
-
od76213/2022_2023 Supply and fixing of 12U wall mounted outdoor type rack with power distribution unit, cable managers, fans and all other accesoories.
2
-
-
1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm
400
-
-
1.21.2
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
500
-
-
5.15
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
300
-
-
od94384/2022_2023
Supply and Installation of weatherproof Bulkhead fitting with LED Bulb
24
-
-
90.4.5.2
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using
standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC
insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C
3
-
-
90.6.5.4 Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.
2 core 1.50 sq mm
1550
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements