Kochi Metro Rail Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KMRL_645295_1Bid Award Id
ViewTender No
CSML/HEALTH/FKTH - BAL/RFP/26-02Tender Authority
Kochi Metro Rail Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
125
-
-
... More
50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
150
-
-
... More
2.34.1
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20%
140
-
-
... More
4.1.6
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
15
-
-
... More
4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
50
-
-
... More
4.4.1 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size)
3
-
-
... More
od172631/2023_2024
5.33.1.+5.34.1 Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth level
59.49
-
-
... More
od172640/2023_2024
5.33.2.+5.34.1 Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level
34.4
-
-
... More
5.9.1
Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete
50
-
-
... More
5.9.3 Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform
170.24
-
-
... More
5.9.5 Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers
200.23
-
-
... More
5.9.6 Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts
130.18
-
-
... More
5.9.7 Centering and shuttering including strutting, etc. and removal of form for: Stairs, (excluding landings ) except spiral - staircases)
10
-
-
... More
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more
7138.8
-
-
... More
5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein
37.56
-
-
... More
5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more
3784.33
-
-
... More
22.4.2 Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete: Dumb bell with ventral bulb ( 180 mm wide, 8 mm thick)
36.6
-
-
... More
6.15 Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
900
-
-
... More
50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
11.79
-
-
... More
50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
27.66
-
-
... More
50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
75
-
-
... More
6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand)
25
-
-
... More
7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)
20
-
-
... More
11.21.1.1 Providing and fixing 10 mm thick acid and /or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile.
81.64
-
-
... More
11.21.2.1 Providing and fixing 10 mm thick acid and /or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding, and joints filled with acid and /or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge.
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile
130.95
-
-
... More
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
472.19
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
121.07
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600 x 600 mm.
559.33
-
-
... More
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
598.25
-
-
... More
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
17.08
-
-
... More
8.3.2
Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge. Granite work
150
-
-
... More
8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
15
-
-
... More
8.7.2 Providing and fixing cramps of required size & shape in RCC/ CC/ Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole ( fastener to be paid separately). Stainless steel cramps
25
-
-
... More
11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
119.03
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
105.51
-
-
... More
od173068/2023_2024 Providing and laying Tactile floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality , of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
50
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
0.6
-
-
... More
9.21.1
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
89
-
-
... More
9.24.1 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded ) (overall area of door shutter to be measured): Rectangular or square
86.69
-
-
... More
9.40.1.1 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50x12 mm
96.02
-
-
... More
9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc
1000
-
-
... More
9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: 125x64x1.90 mm
100
-
-
... More
9.70.2 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: 100x58x1.90 mm
50
-
-
... More
9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
40
-
-
... More
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
40
-
-
... More
9.101.1 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
5
-
-
... More
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
131.7
-
-
... More
9.122.1 Providing and fixing to existing door frames. 30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
46.29
-
-
... More
od173255/2023_2024
Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).br Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. The cost includes 5.5mm thick glass panes, silicon sealent
160.17
-
-
... More
21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
4.8
-
-
... More
9.92.1 Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm
58
-
-
... More
9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
41
-
-
... More
10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
12755
-
-
... More
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
120
-
-
... More
10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
50
-
-
... More
10.21 Providing and fixing M.S. rivets of sizes in position.
25
-
-
... More
10.25.2 Item Shifted to head 14 as item 14.74.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1000
-
-
... More
10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
1299.28
-
-
... More
12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)
438.9
-
-
... More
13.1.1
12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
1822.04
-
-
... More
13.16.1
6 mm cement plaster of mix: 1:3 ( 1 cement : 3 fine sand)
1278
-
-
... More
13.9.2 Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster
374.65
-
-
... More
13.18 Neat cement punning
200
-
-
... More
od173345/2023_2024 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.for outer walls (based on item no;13.21) unit M2
295.67
-
-
... More
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3449.36
-
-
... More
13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
4913.54
-
-
... More
od174302/2023_2024 painting with antibacterial paint of approved premium quality paint of interior grade,including applying additional coats wherever required to achieve even shade and colour. One coat
500
-
-
... More
13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
4516.34
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1342.31
-
-
... More
13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
617.26
-
-
... More
13.68.1 French spirit polishing: Two or more coats on new works including a coat of wood filler
250
-
-
... More
13.71 Lettering with black Japan pint of approved brand and manufacture
4000
-
-
... More
5.18.2 Providing precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete excluding plastering of the jambs, sills and soffits. 40 mm thick
50
-
-
... More
15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
5
-
-
... More
15.7.3 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In lime mortar
22.54
-
-
... More
15.9.1 Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges: In Lime Mortor
5
-
-
... More
15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
2
-
-
... More
od174500/2023_2024 Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 75 mm thick compacted bed of 6 mm stone aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
502
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
100
-
-
... More
22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
75
-
-
... More
50.2.3.1 Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
15
-
-
... More
50.2.33.5 Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.
3
-
-
... More
50.2.33.6 Cutting branches of trees overhanging above any structures of girth between 60cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete
3
-
-
... More
10.20 Providing and fixing bolts including nuts and washers complete.
20
-
-
... More
17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
36
-
-
... More
17.11.2 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required: Size 600x450x200 mm
7
-
-
... More
17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
9
-
-
... More
18.32.1 Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5
5
-
-
... More
18.33.1 Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5
2
-
-
... More
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
15
-
-
... More
17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
30
-
-
... More
50.18.7.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
74
-
-
... More
50.18.7.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
75
-
-
... More
50.18.7.4.2 Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall
50
-
-
... More
50.18.7.5.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
35
-
-
... More
50.18.9.16.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall
80
-
-
... More
50.18.9.17.1 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall
110
-
-
... More
50.18.9.18.1 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
120
-
-
... More
50.18.9.19.1 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
120
-
-
... More
50.18.9.20.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
20
-
-
... More
50.18.9.20.7 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl
5
-
-
... More
50.18.9.21 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow
30
-
-
... More
50.18.9.22.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
20
-
-
... More
50.18.9.22.3 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow
30
-
-
... More
50.18.9.22.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
30
-
-
... More
50.18.9.22.6 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
15
-
-
... More
50.18.9.22.10 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap
5
-
-
... More
50.18.8.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
30
-
-
... More
50.18.8.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
75
-
-
... More
50.18.8.4.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2
45
-
-
... More
50.18.8.5.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
45
-
-
... More
50.18.8.7.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2
30
-
-
... More
50.18.9.7.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2
25
-
-
... More
50.18.9.8.2 Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2
55
-
-
... More
50.18.9.9.2 Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
90
-
-
... More
18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25 mm nominal outer dia pipes
120
-
-
... More
18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes
37
-
-
... More
50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
19
-
-
... More
17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
2
-
-
... More
18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
50
-
-
... More
18.52.1 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931 15 mm nominal bore
75
-
-
... More
50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
75
-
-
... More
50.18.8.8.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
36
-
-
... More
50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
30
-
-
... More
19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
-
... More
19.33 Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
8
-
-
... More
50.18.9.21.7 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
4
-
-
... More
50.18.9.22.8 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
4
-
-
... More
18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
4
-
-
... More
18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
4
-
-
... More
18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
2
-
-
... More
18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
2
-
-
... More
50.17.1.3 Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
60
-
-
... More
50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
1
-
-
... More
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
-
... More
18.19.3.1 Providing and fixing gun metal non-return valve of approved quality (screwed end): 40 mm nominal bore Horizontal
1
-
-
... More
18.19.4.1 Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal bore Horizontal
1
-
-
... More
18.19.5.1 Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal bore Horizontal
1
-
-
... More
18.18.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
5
-
-
... More
50.18.9.8.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
36
-
-
... More
50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
30
-
-
... More
50.18.9.10.1 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
50
-
-
... More
30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
130
-
-
... More
30.2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).
40
-
-
... More
30.2.4.1 Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
40
-
-
... More
30.2.5 Rough dressing the trenched ground including breaking clods.
1000
-
-
... More
30.2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
120
-
-
... More
30.2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
120
-
-
... More
30.2.15.1 Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete:With common burnt clay F.P.S. (non modular) bricks of class designation 5
5
-
-
... More
30.2.29.2 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm
10
-
-
... More
30.2.30.1 Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required frame work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm
20
-
-
... More
30.2.31.1 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) Size of Empty Pots 16cm Top dia, 12cm Bottom Dia & 14cm Perpendicular height
30
-
-
... More
30.2.34 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.
400
-
-
... More
Electrical Works - Schedule 1
-
-
-
... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C
380
-
-
... More
1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loop earthing as required.
500
-
-
... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
700
-
-
... More
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
800
-
-
... More
od281840/2023_2024 Supply and Fixing of 100 Pair Krone Module in MS Enclosure with Lock Key Facility
1
-
-
... More
od281841/2023_2024 Supply Installation Testing commissioning of EPABX for above 40 Analog Lines, complete the EPABX System including controller and all accessories required for the completion & fully functioning of the system.
1
-
-
... More
od301087/2023_2024 Supply testing & commissioning of Analog Telephone set
22
-
-
... More
od301088/2023_2024 Supply testing & commissioning of Master phone @ Reception
1
-
-
... More
1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
700
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
800
-
-
... More
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
23
-
-
... More
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
70
-
-
... More
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
-
... More
1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
20
-
-
... More
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
30
-
-
... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
60
-
-
... More
od204816/2023_2024 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
60
-
-
... More
1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
2
-
-
... More
1.43 : Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
70
-
-
... More
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
8
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
170
-
-
... More
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
9
-
-
... More
2.14.3 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual
current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
8
-
-
... More
2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
6
-
-
... More
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
5
-
-
... More
2.18: Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required
6
-
-
... More
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
5.10 : Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
21
-
-
... More
5.11 : Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
21
-
-
... More
5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
250
-
-
... More
5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
210
-
-
... More
5.18 : Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
30
-
-
... More
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
600
-
-
... More
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
200
-
-
... More
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
400
-
-
... More
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 95 sq. mm and upto 185 sq. mm
150
-
-
... More
od281135/2023_2024 : Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured copper conductor, 2XFY power cable conforming to IS 7098.
3.5 core 25 sq.mm
50
-
-
... More
od281136/2023_2024 : Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured copper conductor, 2XFY power cable conforming to IS 7098.
4 core 16 sq.mm
50
-
-
... More
od281790/2023_2024 Supplying and making end termination for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
4 X 16 sq.mm
4
-
-
... More
od281791/2023_2024 Supplying and making end termination for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
3.5 X 25 sq.mm
4
-
-
... More
od281137/2023_2024 : Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured copper conductor, 2XFY power cable conforming to IS 7098.
2 core 4 sq.mm
150
-
-
... More
od281138/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
4 core 6 sq.mm
100
-
-
... More
od281139/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
4 core 10 sq.mm
250
-
-
... More
od212229/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
4 core 16 sq.mm
100
-
-
... More
od280014/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
3.5 core 25 sq.mm
150
-
-
... More
od280015/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
3.5 core 35 sq.mm
150
-
-
... More
od281478/2023_2024 Supplying and making end termination for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
2 X 4 sq.mm
16
-
-
... More
od281479/2023_2024 Supplying and making end termination for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required.
4 X 6 sq. mm
6
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
16
-
-
... More
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
4
-
-
... More
9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X25 sq.mm (28mm)
10
-
-
... More
9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 35 sq. mm (32mm)
10
-
-
... More
14.15.1 : Supplying and laying of following size owe HOPE pipe .lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal)
250
-
-
... More
14.15.3 : Supplying and laying of following size owe HOPE pipe .lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.120 mm dia (OD-120 mm & ID-103 mm nominal)
150
-
-
... More
1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.
50
-
-
... More
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
400
-
-
... More
1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet
3
-
-
... More
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
2650
-
-
... More
90.11.1.16 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
6
-
-
... More
90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
6
-
-
... More
od204763/2023_2024 : Supply, installation testing and commissioning of Hi wall Split air conditioning units (Indoor and Outdoor Units) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply, minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R410A/R407C, cordless remote etc complete as required as per specification/ISHRAE standards -1 TR
15
-
-
... More
od204764/2023_2024 : Supply, installation testing and commissioning of Hi wall Split air conditioning units (Indoor and Outdoor Units) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply, minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R410A/R407C, cordless remote etc complete as required as per specification/ISHRAE standards -1.5 TR
3
-
-
... More
od300217/2023_2024 Supply and Fixing of Soft copper pipe with 13mm thick nitrile rubber insulation for split air condition unit.
100
-
-
... More
4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
300 mm width X 50 mm depth X 1.6 mm thickness
100
-
-
... More
od210758/2023_2024 : Supply, Installing, Testing and Commissioning of 'Silent Type' Diesel Generating set along with having Prime Power Rating of 125 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor along with standard control panel suitable for AMF Operation including required control cables and all accessories etc complete as per technical specification. (Civil foundation work is not included.)
1
-
-
... More
od299773/2023_2024 Supply, Installation, Testing & Commissioning of 2 HP monoblock pump with 3C x 4 sq.mm, 1.1 kV flexible copper cable of necessery length and all accessories complete as instructed by engineer in charge.
1
-
-
... More
90.14.28.1 S & F Motor starters of the following ratings
Single phase DOL starters for 0.25HP to 3HP motor
1
-
-
... More
od301012/2023_2024 Supply, Installation, testing & commissioning of 10 passenger (680 kg) lifts having contract speed of 1.25 mps serving different floors in the lift shaft as per detailed specifications and as under:- i) Floors:- G+2 (14 meter approx.). ii) Position of Macherinery: Machine Roomless-Gearless.iii) Automatic rescue device complete with dry maintenance free batteries as required. iv) Operation: Microprocessor based simplex selective collective control with/ without attendant. v) Power: 415 V, 3 phase, 50 Hz, 4 wire system. vi) Type of Door a) Car: Power operated, Centre opening horizontal sliding stainless steel scratch proof b) Landing doors: Stainless steel scratch proof landing doors. Lift as per above description complete as required.
1
-
-
... More
Civil Works-Schedule 2
-
-
-
... More
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
100
-
-
... More
9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:
250x10 mm
82
-
-
... More
10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.
G.I. pipes
180
-
-
... More
50.6.1.6 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete
5
-
-
... More
50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10
-
-
... More
50.6.2.3 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
15
-
-
... More
12.42.6.2 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain)
110 mm Shoe.
40
-
-
... More
12.43.1 Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.
75 mm
150
-
-
... More
12.43.2 Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm
150
-
-
... More
13.50.1 Applying priming coat:
With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood)
528.01
-
-
... More
13.28.3 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :
Raised Band
500
-
-
... More
13.28.4 12 mm thick plain cement mortar bands in cement mortar 1:4 ( 1 cement : 4 fine sand) :
Moulded Band
500
-
-
... More
14.91.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with nonwoven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25 degree, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23 degree as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150 degree. Cold flexibility shall be upto -2degree when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
3 mm thick
445.82
-
-
... More
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:
Two or more coats on new work
265
-
-
... More
18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931
15 mm nominal bore
75
-
-
... More
od211623/2023_2024 Providing and fixing 15mm CP Brass pillar taps of minimum weight not less than 690 grams with elbow operated levers ISI marked as directed by the Engineer-In-Charge
20
-
-
... More
od211621/2023_2024 Providing & fixing poly carbonate solid wall sheet 3 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12m or as decided by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.
150
-
-
... More
od211622/2023_2024 Supplying and fixing FRP manhole cover with frame for manholes:
600x450 mm ( heavy duty)
3
-
-
... More
18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions:
45 cm length
15 mm nominal bore
90
-
-
... More
19.8.1.1 Extra for depth for manholes
Size 90x80 cm
With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
3
-
-
... More
21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portion
Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )
100
-
-
... More
21.1.2.3 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)
75
-
-
... More
21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.
Pre- laminated particle board with decorative lamination on both sides
75
-
-
... More
21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5.50 mm thickness
20
-
-
... More
9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.
1.0 mm thick
75
-
-
... More
17.34.1 Providing and fixing toilet paper holder:
C.P. brass
60
-
-
... More
od280599/2023_2024 Providing and fixing 0.71mm or nearest thickness trafford pre-painted aluminium roofing sheets of grade 3105 (size, shape and pitch of corrugation as approved by Engineer-in-charge). The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Rate includes the cost of ridges/valleys of the same make and same specifications.
100
-
-
... More
12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).
28
-
-
... More
11.48.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm
593.25
-
-
... More
od190911/2023_2024 Providing and fixing 12 mm thick toughened glass fixed to hand rails, fixed door tops etc including stainless steel 304 grade patches etc complete as directed by the Engineer-in-Charge.
4.8
-
-
... More
od190912/2023_2024 Providing and fixing stainless steel handle bar in glass / aluminium doors, 32 mm outer dia, 3.0mm thick & 600 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.
5
-
-
... More
od208303/2023_2024 Providing and fixing sanitary fixtures for handicapped toilet including one wash basin of size 65 x 35cm, one pair mounting brackets,one number pillar cock & all other related fittings like CP brass bottle trap , 400gm CP brass angle cock, CP brass waste coupling etc,one number white vitreous china pedestal type water closet (European type) with seat and lid EWC & 10 litre low level white vitreous china flushing Cistern, CP flush bend with fittings and brackets, 40mm flush bend, overflow arrangement with specials of standard make. one no. SS 304 grade hinged rail 76cm & 5 nos. of grab rails 60cm etc designed for people with special needs comes with as per manufactures specification including cutting and making good the walls and floors wherever required as directed by Engineer- in-Charge.
3
-
-
... More
od204669/2023_2024 Providing and fixing square-mouth PVC gully trap 4kg/sq.cm of size 110 x 110mm with pvc square grating 110X110 mm and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) including constructing 30cmx30cm internal size gully trap chamber of depth upto 67cm with 115 thick brick wall in CM 1:6 over 10cm thick 68X68 cm size PCC 1:5:10, laying cc 1:2:4 inside the chamber, plastering inside and outside with CM 1:3,12mm thk with flushing coat etc complete including all operations involved as directed by the Engineer-in -charge.
25
-
-
... More
od190932/2023_2024 Providing and fixing 304 grade SS corner lock with EPC for frameless glass door of approved make as directed by the Engineer-in-Charge.
3
-
-
... More
od190933/2023_2024 OD.Providing and fixing PVC gutter, pro-square of width 200mm, depth 150mm and thickness of walls 3mm at all heights including fittings such as way outs etc. complete as directed by the Engineer-in -charge.
55
-
-
... More
od190935/2023_2024 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
250x16 mm
28
-
-
... More
od192245/2023_2024 OD. Providing and fixing PVC floor trap of inlet and outlet size upto 75mm including cost of cutting and making good the walls and floors:
50
-
-
... More
od192246/2023_2024 Providing and fixing SS grating of approved quality and colour.
square type with openable circular lid
125 mm square size outer frame and 100 mm diameter round grating
50
-
-
... More
od204731/2023_2024 Modified 17.73.1
Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour"
35
-
-
... More
od204931/2023_2024 OD .Extra for providing Ceramic Glazed Floor Tiles of size 600x600 mm instead of Ceramic Glazed Floor Tiles of size 300x300 mm
121.07
-
-
... More
od204932/2023_2024 Extra for using white vitreous china flat back washbasin of size 550X400mm instead of 450x300mm.
4
-
-
... More
od211405/2023_2024 Extra for providing and fixing coloured vitreous oval shaped under counter wash basin of size 560x470mm instead of white vitreous flat back china wash basin of size 450x300mm.
14
-
-
... More
17.7.9 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Surgeon Type wash basin of size 660x460 mm with single 15 mm C P. brass pillar taps with elbow operated levers ISI marked
30
-
-
... More
od204939/2023_2024 Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti termite treatment (excluding the cost of chemical emulsion) Treatment of soil using chemical emulsion @ one litre per 12mm diameter holes made 300 mm apart with Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
250
-
-
... More
od208230/2023_2024 "Painting roof tiles with polyurithine tile coat of approved brand and manufacture.
a) New work (One coat of primer with 100% water diluted PU tile coat and two coats of painting with 30% water diluted PU tile coat applied @ 1.87 litre/ 10 Sqm for all the coats applied at an interval of upto 4 to 6 hours between each coats)."
438.9
-
-
... More
od208231/2023_2024 Providing and fixing wind ties with 40x6mm powder coated Aluminium flat section.
298.87
-
-
... More
od208232/2023_2024 Extra for providing and fixing Stainless Steel butt hinges of size 50x37x1.5mm with SS Screws 20mm instead of Mild Steel Black Enamelled butt hinges of size 50x37x1.5mm with MS Screws 20mm. (The rate is taken from PRICE LMR).
30
-
-
... More
od208233/2023_2024 Extra for providing and fixing Stainless Steel butt hinges of size 100x58x1.9mm with SS Screws 40mm instead of Mild Steel Black Enamelled butt hinges of size 100x58x1.9mm with MS Screws 40mm.
30
-
-
... More
od208237/2023_2024 Providing and fixing CP Brass urinal spreader along with CP brass connection pipe etc. complete as directed by the Engineer in Charge.
12
-
-
... More
od208238/2023_2024 Providing and Fixing CP Brass push-type Unrinal Cock 15mm nominal bore conforming to IS Standards and weighing not less than 350 grams.
12
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge.
48
-
-
... More
od210608/2023_2024 Core cutting of RCC Strucutral members of thickness upto 500mm including the cost/rent of machines, tools etc. as dorected by the Engineer-in-Charge.
b) Openings of sizes from 50mm to 150mm
25
-
-
... More
od210609/2023_2024 Core cutting of RCC Strucutral members of thickness upto 500mm including the cost/rent of machines, tools etc. as dorected by the Engineer-in-Charge.
a) Openings of sizes upto 50mm
25
-
-
... More
od210610/2023_2024 Supplying and Laying 125 micron Plastic Seperation Sheet over basement fill as directed by the Engineer in charge.
24
-
-
... More
od210611/2023_2024 Providing and fixing PVC corner fillers/beadings for ceramic/vitrified wall tile works as directed by the Engineer in charge.
200
-
-
... More
od210612/2023_2024 Supplying and filling 20mm nominal size stone aggregate, complete.
24
-
-
... More
od210613/2023_2024 pointing and grouting the joints of vitrified floor tiles 600x600mm with white cement and matching pigments etc. complete.
694.58
-
-
... More
od210615/2023_2024 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
125
-
-
... More
6.47 Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
15
-
-
... More
17.10.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board
610x510 mm bowl depth 200 mm
10
-
-
... More
Electrical Works - Schedule 2
-
-
-
... More
1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
60
-
-
... More
od281053/2023_2024 a) Main LT Panel
Supply, assembly, erection, testing and commissioning indoor type floor mounted free standing weather proof LT distribution panel of gauge 16 SWG for base body) and16 SWG (for partitioning and covers etc.) with IP-54 protection fabricated out of suitable sized angle iron and flats and covered with 2mm thick CRCA sheet duly pre-treated in seven tank process for de-greasing , de-rusting & phosphated painted with 2 coats of primer paint then the panel surface shall be finished/rubbed and then painted with final coat of epoxy based power coated paint. Panel shall be compartmentalised with rubber gasketed hinged door. The panel shall be of form 4 B type only . Panel shall be having front opening for installation of separate cable alleys, bus bar chamber and switchgear compartments. Provision in cable alleys to be kept for bottom cable entry for incoming & outgoing cables. A clear space of 200mm to be kept from floor level for switchgear compartment. Extended bus bar links/ terminals to be provided for connecting cables. Air ventilation breathers to be provided for heat dissipation. Only SMC, DMC or FRP supports shall be used for bus bars.
Suitable sized knock-out holes for cable glands shall be provided as per respected schematic drg. of the panel with the following equipments / instruments. Paint shall be epoxy based approved make as per shade approved by Engineering In charge. Each Compartment shall be numbered / lettered as per the approved drg. affixing MV Danger plate at suitable intervals/locations controls etc. complete in all respects as desired by Engineer In charge Incoming Two numbers of 250A 4P, MCCB, 35kA, ( transformer and diesel generator incomers ) with microprocessor based adjustable release and extended rotatory handle, CT's, Multifunction for KWH, VIF etc. metering, phase indicating lamps & Control fuses/MCB's etc. detailed in the specifications. Bus bars One set of TPN -300 A, Aluminium bus bars, E 91 grade, 1100 Volts grade duly covered with FRLS heat shrinkable sleeves, colour coded duly fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed portion. Bus bar chamber to be selected so that it provides gap between bus bar and heat dissipation conforming to IS standard - 1 set. Outgoings Separate cubicle chamber with cable alley not less than 300 mm width for installation / connecting the following switchgear with the main bus bar using aluminium bus link or copper conductor flexible wires suitable to the switch rating and connecting outgoing terminals of the switchgear with terminal blocks of appropriate current rating using flexible copper wires duly terminated by cable lugs and thimbles. Protection, over load and short circuit with thermal, magnetic/ microprocessor release and earth fault as per IS -13947. The incomers from Transformer secondary and DG set shall be provided with electro mechanical interlock and automatic change over to DG set shall be made during mains failure. The incomers shall be provided with RYB indications and ON, OFF and trip indications using LED lamps. The out going feeders shall be provided with ON, OFF and Trip indication lamps.
Out goings :
100 A TPN MCCB, 25 KA – 2 nos
63 A TPN MCCB , 25 KA– 4 No
40 A TPN MCCB , 25 KA– 3 No 32 A TPN MCCB , 25 KA– 3 nos
1
-
-
... More
1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
180
-
-
... More
1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
65
-
-
... More
od280013/2023_2024 Supply of following size 1.1 kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable conforming to IS 7098.
3.5 core 150 sq.mm
150
-
-
... More
9.1.26 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2 X 150 sq. mm (50mm)
8
-
-
... More
2.10.5 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Triple pole and neutral
1
-
-
... More
2.14.1 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
2
-
-
... More
4.6.2 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness
200
-
-
... More
90.3.23.5.3 Surface mounting decorative fluorescent tube light fitting complete with lamp with complete accessories duly wired up for use on 230 V AC .
Surface mounting LED 20W LED Batten with out put 2000 lumen for use on 250V AC supply.
20
-
-
... More
90.12.9.2 Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench
50/38 mm or nearest size
150
-
-
... More
90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
3.15 mm copper conductor ( 10 SWG)
250
-
-
... More
90.16.1.10 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
3.25 mm GI conductor (10 SWG)
150
-
-
... More
90.16.3.9 Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)
25 x 3 mm copper strip
60
-
-
... More
90.16.5.3 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.
3.15 mm (10 SWG)
50
-
-
... More
90.12.5.38 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
4 core 4 sq mm
150
-
-
... More
90.15.3.1 Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters
3
-
-
... More
90.15.4.2 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
3
-
-
... More
od204328/2023_2024 Supply and Installation of outdoor weather proof IP66 rated Junction Box including associated accessories of approved make
4
-
-
... More
od204329/2023_2024 Supply, Installation, Testing & commissioning of 10 W LED Bulk head fixture, Cool White of approved make complete with all accessories as required suitable for 240V AC supply.
35
-
-
... More
od204586/2023_2024 Supplying and fixing exhaust gas piping of suitable dia. welded black MS, B Class pipe conforming to IS:3589 cuty to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wiremesh & aluminum cladding etc., as required as per specifications for 125 KVA DG set
20
-
-
... More
od204588/2023_2024 Supplying and fixing of Cat6 24 port Straight Loaded Patch panels
2
-
-
... More
od281083/2023_2024 Supply, Installation, Testing and commissioning of 6U Wall Mount Rack with power distribution unit, cable managers, fans and other accessories
2
-
-
... More
od204589/2023_2024 Supply, Installation, Testing and commissioning of 12U Wall Mount Rack with power distribution unit, cable managers, fans and other accessories
1
-
-
... More
od204590/2023_2024 Supply and fixing of fire retardant/extinguishing Electrical synthatic mat of 2 mm thick +/- 10% as per IS 15652, suitable for all voltage not exceeding 3.3 KV and having minimum width of 1000 mm +/-20mm as per site requirements.
6
-
-
... More
od207367/2023_2024 Supply and providing of laminated electrical shock treatment chart (prescribed under IE/ Indian Standards) of minimum size 50 cm x 70 cm
1
-
-
... More
od204591/2023_2024 Supply, Installation, Testing & Commissioning of LED High bay light with system wattage of 150 Watts, Ingress Protection of IP65, Luminous Flux ≥ 130 LM ±10% / per watts, CRI ≥ 80 Ra, Kelvin color temperature of 2700K-6000K, Beam Angle 120°, Wide Input Voltage Range of 100V-280V ± 10%, efficiency ≥ 87%, THD 10% ± 10%, Auto-restart protection for short-circuit and High Voltage, Hysteretic Thermal Shutdown, 6 KV surge protected and working temperature of -5º to + 55°.
2
-
-
... More
od204330/2023_2024 Supply and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
RJ 45 Socket Outlet
48
-
-
... More
od204792/2023_2024 Supply, Installation, Testing & Commisioning of 400mm sweep 5 star rated BLDC Wall mounting oscillating type fan of approved make with remote control including all acessories of approved make as required for use on 240V AC supply.
10
-
-
... More
od204793/2023_2024 Supply, Installation, Testing and Commissioning of 380 mm sweep, 900 rpm Heavy Duty Exhaust fan with louvered shutter working on 230 V A/C supply.
1
-
-
... More
od204794/2023_2024 Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.
1200mm sweep -5star rated BLDC ceiling fan of approved make without remote control complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C.
70
-
-
... More
od204795/2023_2024 Supply, Installation, Testing and Commissioning of 250mm sweep Light Duty Exhaust fan in plastic body with self opening louvers working on 230V single phase A/C.
21
-
-
... More
od206300/2023_2024 Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required for input and output of cable 3 x 4 sq.mm in flush terminal box of pole.
5
-
-
... More
od206302/2023_2024 Supply, Installation, Testing & Commissioning of one feet 5 W LED Batten, Cool white of approved make suitable for 240 V AC supply as instructed by engineer in charge.
21
-
-
... More
od206303/2023_2024 Supply, Installation, Testing & Commissioning of indoor type 25 W LED down lighter surface / recess mounted luminaire including all accessories of approved make suitable for 240 V AC supply as instructed by Engineer In charge
110
-
-
... More
od206304/2023_2024 Supply, Installation, Testing & Commissioning of indoor type 15 W LED down lighter surface / recess mounted luminaire including all accessories of approved make suitable for 240 V AC supply as instructed by Engineer In charge.
250
-
-
... More
od206305/2023_2024 Supply & fixing of 9 W LED bulb including angle batten holder with advanced international interlock configuration of approved make
25
-
-
... More
od210761/2023_2024 Lift panel: Supply, Installation, Testing & Commissioning of floor/ wall mounted, dust and vermin proof, IP 54 rating, cubicle type panel board as per given specification, made out of 16 swg CRCA sheet with protection as per standards, concealed hinges, neoprene gasket, panel lock etc. Entire sheet work will be treated under seven tank process and then power coated finish with colour approved by engineer in charge. The panel are fabributed with copper bus bar and having switchgears including cabling with all accessories etc complete as per approved schematic drawing. Incomer: 63 A TPN MCB- 1No. Outgoing: i) 40 A TPN MCB & 40 A 4P 100mA RCCB- 1 set ii) 25 A TPN MCB & 25 A 4P 30 mA RCCB -1 set ; 6-32 A SP MCB-3 No
1
-
-
... More
od211637/2023_2024 Supply, Installation, Testing & Commissioning of MCCB submain panel conform to IS Standard on wall/ Wooden board/ flush mounting using required clamps, bolts, nuts, washers etc. with provision of fixing of suitable type MCCB as incomer for 3 phase double door with necessary bus bar completely wired to use on 440 Volts 3 phase powder coated painting with a provision for fixing of single /three suitable capacity MCCB/MCBs as out going conforming to IS standard. Also, Supply and fixing of 100 A four poles 25 KA Moulded Case Circuit breaker (MCCB) with thermal magnetic adjustable release as incomer and with 63 A 3 pole MCCB (1 no) with thermal magnetic adjustable release and 32 A 3 pole MCCB (3 Nos) with thermal magnetic adjustable release as out going.
2
-
-
... More
od211638/2023_2024 Supply and fixing of 20 pair krone distrubution box with all accessories for telephone network.
1
-
-
... More
od211640/2023_2024 Supply and fixing 10 pair krone distrubution box with all accessories for telephone network.
3
-
-
... More
od211641/2023_2024 Supply and laying of jelly filled armoured telephone cables annealed bare copper conductor polythylene insulated core twisted into pairs laid up, fully filled taped with suitable absorbent tape, cable core applied with poly aluminium laminate moisture barrier, polyethlene sheath double steel tape armoured and over all poly ethylene jacket armoured telephone 20 pair (0.5 sq mm)
100
-
-
... More
od211642/2023_2024 Supply, Installation, Testing and Commissioning of 2X10 KVA, three phase input, Three phase output, true on-line UPS system with 30 minutes back up, including all accessories, isolation transformer, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification. The UPS system consist of UPS unit and battery bank . Fully digital controlled based on DSP Power factor corrected from end 0.9 Pure sine wave output. Full time output voltage & frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch Auto temperature compensation. The UPS shall be 100% generator compatible. The UPS should include SNMP card for network monitoring, BMS compatibility etc. Also, SITC of BATTERY Sealed Lead Acid Maintenance Free, Back Up time 30 Min backup on full load -2 set
1
-
-
... More
od211824/2023_2024 Dismantling & recommissioning of existing modular switch, cover plate, connection etc. as required without damage in the each switch box irrespective of module as per instruction from engineer in charge. (Completed Point Wiring)
80
-
-
... More
od211825/2023_2024 Dismantling & refixing of DB cover in the existing SPN/TPN MCB distribution board as per instruction from engineer in charge.
12
-
-
... More
od214298/2023_2024 Supply, installation, testing and commissioning of evacuated tube collector type solar hot water system, insulated stainless storage tank with electrical back up, powder coated steel support structure for collector tank etc. as required capacity of MNRE approved conforming to IS standard. 300 Litres per day
1
-
-
... More
od281060/2023_2024 Supply, Installation, testing and commissioning of PLC based Auto Mains Failure ( AMF) panel fabricated from CRCA sheet steel of 2.0 mm thick, powder coated finish, engine start stop commands, control relays, selector switches for ammeter & voltmeter, ammeter & volt meter, control & power contactors, timers, electronic hooter, visual & alarm indication for faults, UPS, operator interface panel complete in all respect suitable for 80 - 160 KVA DG Set
1
-
-
... More
od279520/2023_2024 Supply, installation, testing and commissioning of evacuated tube collector type solar hot water system, insulated stainless storage tank with electrical back up, powder coated steel support structure for collector tank etc. as required capacity of MNRE approved conforming to IS standard.
500 Litres per day
1
-
-
... More
Fire Fighting Works (Civil)
-
-
-
... More
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.
All kinds of soil
58.87
-
-
... More
2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
50
-
-
... More
50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
15
-
-
... More
2.33.3 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
Beyond 120 cm girth up to and including 240 cm girth
4
-
-
... More
2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.
All kinds of soil
5
-
-
... More
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
5.42
-
-
... More
od172640/2023_2024 5.33.2.+5.34.1 Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.
All work above plinth level
3
-
-
... More
od172631/2023_2024 5.33.1.+5.34.1 Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.
All work upto plinth level
22
-
-
... More
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:
1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5
-
-
... More
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:
Foundations, footings, bases of columns, etc for mass concrete
24.24
-
-
... More
5.9.2 Centering and shuttering including strutting, etc. and removal of form for:
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
65
-
-
... More
5.9.3 Centering and shuttering including strutting, etc. and removal of form for:
Suspended floors, roofs, landings, balconies and access platform
30
-
-
... More
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
Thermo - Mechanically Treated bars of grade Fe-500D or more
3240
-
-
... More
5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo - Mechanically Treated bars of grade Fe-500D or more
500
-
-
... More
22.22 Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
68
-
-
... More
50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
52
-
-
... More
13.18 Neat cement punning
77
-
-
... More
13.1.1 12 mm cement plaster of mix:
1:4 ( 1 cement : 4 fine sand)
105
-
-
... More
13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On steel work
500
-
-
... More
22.4.2 Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:
Dumb bell with ventral bulb ( 180 mm wide, 8 mm thick)
22
-
-
... More
50.2.33.7 Cutting branches of trees overhanging above any structures of girth between 90cm to 120cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.
4
-
-
... More
od211619/2023_2024 SITC of 2Hr Rated Fire Door 46mm thick Steel Door 1200mmx2100mm Size, 1.2mm Thick GI Sheet sandwiching with FR insulation materials in between.The Door frames are manufactured from 1.5 mm thick GI sheet pressed form to double rebate profile of size 143x57mm the door frame and door shutter are finished with powder coated including Panic Point modular for fire and smoke
doors, Door Closer, Dash Fastner
4
-
-
... More
od211622/2023_2024 Supplying and fixing FRP manhole cover with frame for manholes:
600x450 mm ( heavy duty)
2
-
-
... More
50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
1200
-
-
... More
10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.
G.I. pipes
500
-
-
... More
26) od280498/2023_2024 Providing and fixing 0.71mm or nearest thickness trafford pre-painted aluminium roofing sheets of grade 3105 (size, shape and pitch of corrugation as approved by Engineer-in-charge). The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Rate includes the cost of ridges/valleys of the same make and same specifications.
65.72
-
-
... More
Fire Protection System
-
-
-
... More
od206238/2023_2024 Supply Installation, testing and commissioning of 7.5 HP Booster pump, monobloc rated for 900 LPM at 35 M head high efficiency volute type with cast iron casing, pump coupled to a squirrel cage induction motor, totally enclosed fan cooled with supply condition 415v, 50 HZ floor mounted type rated for 1800 RPM including supply of all accessories Including starter panel
1
-
-
... More
od206239/2023_2024 Supply, installation, testing and commissioning of Air Release Valve Gunmetal, conforming to IS 903:1993, having rubber ball with sealing seat and with 25mm. BSP threaded male inlet, including necessary accessories and connections
1
-
-
... More
od206240/2023_2024 Supply, installation, testing and commissioning of dual plate Non-return valve of 100mm dia having PN 16 pressure rating complete with CI body, ductile iron disc, SS plates vulcanized NBR seal flanged end, GI bolts, nuts, washers etc. as required as per technical specification and confirming to API:594.
1
-
-
... More
od206241/2023_2024 Supply, Installation, Testing & Commissioning of Ball valve of 25mm dia
4
-
-
... More
od206242/2023_2024 Supply, installation, testing and commissioning of Butterfly valve of 100mm having PN 16 rating conforming to IS 13095 complete with CI body, SS Disc, Nitrile Rubber Seal, O -ring, flanges, bolts, nuts, washers etc. as required as per technical specification.
1
-
-
... More
od206243/2023_2024 Supply, installation, testing and commissioning of C. I. Gate Valve with Non Rising Stem & Cap Top, PN-16, confirming to IS: 14846 with ISI Mark and with required companion flanges, rubber insertions, bolts, nuts, Washers etc. complete. The Price shall be inclusive of ‘Fabricated Key' for Operation from Ground Level, as per Technical Specifications.-100mm.
2
-
-
... More
od206244/2023_2024 Supply, laying, pressure testing and commissioning of 'C' class heavy duty MS pipe of 100 mm diameter conforming to IS 1239 including welding, providing fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. Complete as required as per the technical specification.
45
-
-
... More
od206245/2023_2024 Supply, installation, testing and commissioning of Pressure gauge 0-200 PSI (0 - 14 Kg ) range, 3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube and ball valve including fittings, etc. complete as required as per the technical specification.
2
-
-
... More
od206246/2023_2024 Supply, installation, testing and commissioning of industrial type Pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required as per technical specification
1
-
-
... More
od206247/2023_2024 Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required as per technical specification.
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585(b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with 25 mm dia stop valve (gun metal) & M.S. Pipe
3
-
-
... More
od206248/2023_2024 Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type 1) as required as per technical specification
5
-
-
... More
od206249/2023_2024 Supply, installation, testing and commissioning of Hose boxes/cabinets wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required as per technical specification.
4
-
-
... More
od206250/2023_2024 Supply, installation, testing and commissioning of 63 mm dia Gun metal Branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per technical specification.
4
-
-
... More
od206251/2023_2024 Supply, installation, testing and commissioning of gun metal Fire hydrant valve, single head oblique type with 63 mm and inlet side with flange suitable for 80 mm to blank
4
-
-
... More
od206252/2023_2024 Supply, installation, testing and commissioning of Fire brigade collective breaching valve with 2 nos. of 100 mm flanged outlet connection and built-in check valves complete with GI nuts, bolts, gasket etc as required as per technical specification.
1
-
-
... More
od206253/2023_2024 Supply and installation of \Clean agent Modular type fire extinguisher standalone suppression system of HCFC123- 5kg capacity
3
-
-
... More
od206254/2023_2024 Supply and installation of \Clean agent type fire extinguisher of 2kg capacity. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket, all the accessories and as per the technical specifications. The Extinguisher should be manufactured strictly as per IS: 15683:2018 with ISI mark.
2
-
-
... More
od206255/2023_2024 Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE Marked) completes with wheel type valve with one-meter-long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas complete as required as per the technical specification.
2
-
-
... More
od206256/2023_2024 Supply and installation of ABC Stored pressure type Fire Extinguisher 4 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2006 with ISI mark. complete as required as per the technical specification
6
-
-
... More
od206260/2023_2024 Supply and fixing (in appropriate location) of Fire Emergency Evacuation Plan (Color) printed in photo paper of Size A2 sand-witched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification and conforming to IS 9457, IS 12349, IS 12407. Evacuation Plan shall be prepared by the contractor and got approved from Client/Consultant.
3
-
-
... More
od206261/2023_2024 Supply and installation of phot luminescent glow signage containing standard instructions to the occupants in case of Fire emergency (FIRE ORDER), of standard size (600*800 MM minimum) as per conventional design/ colour code on 3 mm thick Aluminum composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification
1
-
-
... More
od206262/2023_2024 Supply and installation of phot luminescent glow signage such as Fire Duct, Fire Staircase /Fire exit/Fire control room/Emergency light switch /Floor Number of standard size (500*200 MM) as per conventional design/ color code on 3 mm thick Aluminum composite, panel conforming to IS 9457. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification
16
-
-
... More
od279472/2023_2024 Providing, fixing, test and commissioning of Intelligent Addressable Smoke Detectors. The detectors shall programmable for timed automatic sensitivity selection complete with Standard Base, junction box and other accessories as required. Detectors shall be UL listed.
60
-
-
... More
od279473/2023_2024 Supply, installation, testing and commissioning of Intelligent Addressable Fire Alarm Control Panel (FACP), LCD display with Battery Back up for 24 hours for normal operation and 1 hours on alarm condition. The control panel, battery charger etc, shall be UL listed approved. The panel shall work in a flash scan protocol and shall be capable of networking with other compatible panels. The panel shall have 1 Loop Capacity
1
-
-
... More
od279485/2023_2024 Providing, fixing, test and commission Intelligent Addressable Fault Isolator Module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected.
3
-
-
... More
od279486/2023_2024 Providing, fixing,, test and commissioning of Intelligent Addressable Relay Module, for Lift , Ventilation System, etc
2
-
-
... More
od279487/2023_2024 Providing, fixing,, testing and commissioning of Intelligent Addressable Input/Monitor Module, for interface with Fire pump, etc
2
-
-
... More
od279488/2023_2024 Providing, fixing, test and commissioning of Intelligent Addressable Control Module, for interface with Fire Alarm Annunciating System.
3
-
-
... More
od279489/2023_2024 Providing, fixing, test and commissioning of Horn/Strobe rated at 82 dB @3Mtr. for audible annunciation and 75Candela flashing at 1Hz. for visual indication.
4
-
-
... More
od279490/2023_2024 Providing, fixing test and commissioning of Intelligent Addressable Manual Call Station Point with addressable module that monitors and reports contact status.
4
-
-
... More
od281027/2023_2024 Supply and laying of 2x 1.5sq.mm armored Copper FRLS-ZH Red color cable ISI marked with proper clamping, supports and terminations appropriately above /below ground on wall surface or recess as required as per the technical specifications.
350
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements