KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Setting Up Of Medical College At Painavu Idukki
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KITCO_317036_1Bid Award Id
ViewTender No
HFWD/KITCO/MH/17/2019Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
70 HP
1
-
-
52 HP
1
-
-
Ceiling Suspended Units (Double Skin Type)
Supply,Installation , testing and commissioning of the following capacity ceiling suspended indoor ductable units with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with cordless remotes, power wiring, suitable capacity drive motor, electrical controller, temperature controller with digital display, thermostat, control wiring, complete with necessary vibration isolators, CPVC drain pipe connections with 9mm thick round nitrile rubber insulation finished with 7 mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating, including U-trap along with necessary elbows, fittings etc., filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 ,power/control cabling from power supply, etc complete in all respects as per the technical specifications.
-
-
-
1200 CFM (3TR)
4
-
-
2200 CFM (5.5TR)
4
-
-
3400 CFM (8.5TR)
5
-
-
4400 CFM (11TR)
9
-
-
Supply,installation,testing, commissioning of of Gas/ Liquid Copper Piping with nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating and insulation shall have antimicrobial properties, suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing, drilling, concealing and making good the same on walls etc of following specifications as per site conditions and with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc.Complete in all respects as per technical specifications.
NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items.Both refrigerant suction and liquid line shall be insulated.
-
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/4")
200
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 5/8")
200
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/8")
250
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/4")
35
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/8")
250
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 7/8")
337
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/4")
262
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 5/8")
54
-
-
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/2")
171
-
-
Cabinet Fans for Exhaust
Supply , installation ,testing and commissioning of acoustically insulated cabinet fans (duct mounted) with suitable blower, impellers manufactured from galvanised steel and external rotor motors. 3 phase direct driven motor of following capacity for exhaust, with starter/starter panel , required lengths of power and control wiring, clamping, earthing other accessories etc., complete in all respects as required by the technical specifications. (Location: Labs)
-
-
-
450 CFM with External static pressure 15 MM of WG
1
-
-
700 CFM with External static pressure 15 MM of WG
5
-
-
2300 CFM with External static pressure 25 MM of WG
1
-
-
4500 CFM with External static pressure 25 MM of WG
1
-
-
Supply, Installation , testing and commissioning of acosutically inuslated in-line axial exhaust fans with three phase direct driven motor of following capacity for exhaust complete with starter, required lengths of power and control wiring, clamping, earthing other accessories, supports etc. complete as required by the technical specifications.
-
-
-
300 CFM ESP -10 mm of w.g
1
-
-
400 CFM ESP -10 mm of w.g
3
-
-
600 CFM ESP -10 mm of w.g
3
-
-
700 CFM ESP -10 mm of w.g
1
-
-
1000 CFM ESP -15 mm of w.g
1
-
-
1100 CFM ESP -25 mm of w.g
1
-
-
1700 CFM ESP -25 mm of w.g
1
-
-
1900 CFM ESP -25 mm of w.g
5
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 11 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping (both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric insulation as per specification between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
1
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 8.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping (both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric insulation as per specification between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
3
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 5.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping(both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric Nitrile Rubber between indoor & outdoor units as per site conditions with treated woven glass cloth laminated on one side, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
4
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 3 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping (both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric insulation as per specification between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
1
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 1.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping (both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric insulation as per specification between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
5
-
-
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 1 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, suitable sized copper refrigerant piping (both suction and liquid piping) upto 10 mtr including 19mm thick closed cell elastomeric insulation as per specification between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(max 3m from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for three phase 440V supply inclusive of all taxes etc complete as required by the technical specifications.
1
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thick closed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification for 11 TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
20
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thick closed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification for 8.5TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
26
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thickclosed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification insulation as per specification for 5.5 TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
11
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thick cclosed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification as per specification for 3TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the technical specifications.
6
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thick cclosed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification for 1.5 TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the technical specifications.
30
-
-
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 10 mtr including 19mm thick closed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification for 1TR machine between indoor & outdoor units as per site conditions complete in all respect inclusive of all taxes etc complete as required by the technical specifications.
8
-
-
Supply, installation, testing and commissioning CPVC drain pipe 6kg/sq.cmof suitable dia connecting the drain pan of the indoor units to nearest drain point, with 12mm thick closed cell elastomeric insulation with treated woven glass cloth laminated on one side as per specification inclusive of all taxes etc complete as required by the technical specifications.
305
-
-
AIR DISTRIBUTION
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows,splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
-
-
-
Ducting
0.63 mm (24 Gauge)
2425
-
-
0.80 mm (22 Gauge)
1262
-
-
1.00 mm (20 Gauge)
10
-
-
1.25 mm (18 Gauge)
10
-
-
THERMAL INSULATION
Supply & fixing of Thermal Insulation of ducting using 13mm thick Closed Cell Elastomeric nitrile rubber having a density of 40-60 Kg/m3 and finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection complete in all respects as required by the technical specifications . (For indoor applications)
5957
-
-
ACOUSTIC INSULATION
Supply & fixing of Acoustic Insulation of ducts using opencell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 10 mm with anti-microbial protection etc. complete in all respects as required by the technical specifications
1449
-
-
Supply & fixing of Acoustic Insulation of AHU Rooms using open cell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 15 mm with anti-microbial protection with suitable frame works etc. complete in all respects as required by the technical specifications
328
-
-
AIR TERMINAL DEVICES
Supplying & fixing of powder coated extruded aluminium Supply Air Grilles with aluminium volume control dampers as per technical specifications.
2
-
-
Supplying & fixing of powder coated extruded aluminium Return Air Grilles with louvers but without volume control dampers complete as required by the technical specifications.
2
-
-
Supplying, fixing testing commissioning of Supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core as per technical specifications.
11
-
-
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core as per technical specifications.
20
-
-
Supply, Installation , testing and commissioning of Aluminium extruded exhaust air louvers with damper,bird screen etc. complete in all respects as required by the technical specifications..
8
-
-
Supply, Installation , testing and commissioning of Aluminium extruded fresh air louvers with fresh air damper,bird screen etc. complete in all respects as required by the technical specifications..
11
-
-
Supply, Installation, testing and balancing of opposed blade type Extruded Aluminium volume control dampers of 16 gauge GI sheets to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distributions system as per technical specification.
17
-
-
Fire dampers
Supply, Installation ,testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for Air Distribution Networks complete in all respects as per the technical specifications.
21
-
-
SOUND ATTENUATOR
Supply,Installation,Testing and Commissioning of Sound Attenuators to be fixed at the supply and return of air handling units as per the technical specifications complete as required.
8
-
-
Aircurtain
Supply, installation, testing and commissioning of air curtains for sliding doors of width 1.0 m (15 amps female socket will be provided by Client outside the compartment. Supplier shall draw connection from the socket to air curtain using mail socket and cable) The system shall include all accessories including motors, blowers, door opening sensors etc complete in all respects inclusive of all taxes etc complete as required by the technical specifications.
12
-
-
AIR CONDITIONING OF OPERATION THEATRES
Supply, Installation, Testing and Commissioning of Air Conditioning works of 7 nos of CLASS 10000 Operation Theatres comprising of the following items.
-
-
-
Air Handling Unit: Double skin DX type air handling unit suspended from ceiling with all necessary supports,structures etc., constructed out of 24G GI sheets with 25mm PUF section in between and comprising of following sections: Outlet volume control dampers, canvas connections, Fan section with required air flow and static pressure, Motor, drive set, dehumidifiers, humidistat etc. Filter sections with provision for 0.3-1.0 micron filters of MERV 13 as perASHRAE 52.2 Standards. Common base frame with Vibration isolation pads. Suitable inspection doors for filter, coil & blower sections, with necessary fittings, accessories etc. as per technical specifications. inclusive of all taxes etc complete as required by the NABH/ISHRAE specifications, Clean Room Standards. Capacity: 4400CFM for 11TR
7
-
-
Air-cooled condensing unit complete with copper piping between indoor and outdoor units , refrigerant gas, HP and LP cutouts, microprocessor based control panel with suitable control cabling, power wiring(max 3m from isolator), thermostat wiring, high-low pressure cut out etc. etc. Thermostatic expansion valves, thermostats for tripping the compressors after attaining the temperature in conditioned area and with suitable insulation of the suction and liquid line. Air cooled Condenser coil shall be provided with suitable size fan and motor, structural supports for ODU('s) inclusive of all taxes etc complete as required by the NABH/ISHRAE specifications. Capacity of unit 11TR
7
-
-
Supply and application of water based washable PU (Polyurethane) Paint on the wall/vetrified wall tiles. Preliminary coating of wall /tile should be provided with one coat of compatible primer followed by 2 coats of PU wall paint. The paint applied should be Non-VOC type. The white cement joints between the tiles on the walls have to be fully covered such that there is a seamless coat of paint on the walls.The paint used should be washable, suitable for hospital application etc. inclusive of all taxes complete as required by the NABH/ASHRAE specifications for an operation theatre application.
1776
-
-
Air-Distribution Network for Supply air, Return air,Exhaust Air,Fresh Air made out of 0.8 mm thick Aluminium sheet with suitable gasketing & special sealing , perforated grilles, associated accessories, supports etc. considering OT application and as per relevant SMACNA standards inclusive of all taxes etc complete as required by the technical specifications.
1080
-
-
Motorised Volume Control Dampers of 20 gauge SS sheets to be provided with suitable links, levers, actuator and quadrants along with required length of power and control wiring for motorised control of volume of air flow and for proper balancing of the air distributions system as per specification inclusive of all taxes etc complete as required by the technical specifications
7
-
-
Motorised Fire Damper with suitable links, levers, actuator and quadrants along with required length of power and control wiring for motorised control along with accessories etc. inclusive of all taxes complete as required by the technical specifications.
7
-
-
Return Air Risers with necessary air distribution networks consisting of aluminium ducts, dampers, collars, grills etc. embedded with modular sandwich Wall panels of 50mm thick EPS Panels with 0.6mm thick coating of SS304 sheet (mat finish) on exposed surface etc. inclusive of all taxes complete as required by the NABH/ASHRAE specifications for an operation theatre.
7
-
-
Supply, fixing of External Thermal insulation on ducts with 13mm thick, 40-60 kg/m3 density, regular closed cell nitrile rubber with anti-microbial protection class O insulation with aluminium foil facing on outside using self adhesive tape as per specification. Quoted price shall be inclusive of adhesive, tapes, all taxes etc. as required by the standard technical specifications.
1672
-
-
Supply, fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1,having density 140 kg/m3 insulation using manufacturers recommended adhesive, tapes etc and applications.Quoted price shall be inclusive of adhesive, tapes, all taxes etc for complete ducting area as required by the standard technical specifications.
430
-
-
Supply, fixing of Pre-filters of capacity4400cfm for 10μ particles (with one set spare) of MERV 13 as per EN779 Standards inclusive of all taxes etc complete as required by the NABH/ASHRAE specifications.
10μ
7
-
-
Supply, fixing of Pre-filters of capacity 4400cfm for 5μ particles (with one set spare) of MERV 13 as per EN779 Standards inclusive of all taxes etc complete as required by the NABH/ASHRAE specifications.
5μ
7
-
-
Supply, fixing of HEPA filters: (48SqFt @ 90fpm) Terminal HEPA filters of efficiency 99.97% down to 0.3 microns or higher efficiency shall be provided. Air quality at the supply i.e. at grille level should be Class 100/ISO Class5 (at rest condition). with Gel-seal arrangement to the satisfaction of Engineer-in-Charge, room side replaceable, flange type, specially designed for Operation Theatres with suitable aluminium frame work and HEPA filter Plenum with necessary provisions for Validation inclusive of all taxes etc complete as required by the NABH/ASHRAE specifications.
7
-
-
Onsite Validation: HEPA filter Integrity Test, Particle Count Test & Air Velocity inclusive of all taxes etc complete as required by the NABH/ASHRAE specifications.
7
-
-
Supply, Installation ,testing and commissioning of Under-deck insulation of exposed roof using Class "O" Nitrile rubber insulation of 19mm thickness, anti microbial insulation and stuck to the roof using suitable adhesives, tapes etc. as per the technical specification, manufacturer's recommendation.
1293
-
-
FIRE HYDRANT SYSTEM AND SPRINKLER SYSTEM
Supplying, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required as per technical specification.(a) Horizontal, Centrifugal type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal (Pump shall ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest hydrant oulet at rated flow of 2280 lpm) pump with a specified flow of 2280 lpm at 55m approximate head, conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM/2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
Supplying, Installation, Testing and Commissioning of diesel engine driven main fire pump (Including control panel) suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification.(a) Horizontal, Centrifugal type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal (Pump shall ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest hydrant oulet at rated flow of 2280 lpm) pump with a specified flow of 2280 lpm at 55m approximate head,conforming to IS 1520.(b) Suitable HP,1500/1800 RPM, water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment,2x12v 180AH Batteries and leads, Diesel Tank Fabricated from MS sheet of 4mm Thick (Minimum Capacity 300 Litres) with level indicator, By-pass line,MS Piping to diesel tank from engine, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads. (e) Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode, Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication, Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter, All standard relays and accessories for automatic operation of diesel engine.
1
-
-
Supplying, Installation, Testing and Commissioning of electric driven pressurisation pump( Jockey Pump) suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification.(a)Horizontal type, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 55 m approximate head, conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8" BSP bottom entry, 6" dial weather proof with stainless steel internals including fittings, etc. complete as required as per technical specification.
6
-
-
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required along with control wiring for successful; system operation as per technical specification.
5
-
-
Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories,and painting with synthetic enamel paint of approved shade as required as per technical specification.
1
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty GI pipe conforming to IS 1239/IS 3589 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with one coat of primer and two or more coats of synthetic enamel paint of required shade complete as required as per technical specification. (Pipes shall be provided with angle supports on beams in addition to other supports as mentioned in technical specifications.)
-
-
-
200 mm dia (6.3 mm thick)
35
-
-
150 mm dia
223
-
-
100 mm dia
1542
-
-
80 mm dia
777.04
-
-
65 mm dia
446
-
-
50 mm dia
314
-
-
40 mm dia
1304
-
-
32 mm dia
238
-
-
25 mm dia
3088.03
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty GI pipe conforming to IS 1239/IS 3589 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. in ground at a depth of 1m including welding, excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating of minimum 4 mm thick as per IS10221, refilling the trench etc. of following sizes complete as required as per technical specification.
-
-
-
150 mm dia
937
-
-
100 mm dia
129
-
-
80 mm dia
108
-
-
Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having Class 125 (PN 16) rating complete with CI body, ductile iron disc, flanges, bolts, nuts, washers etc. conforming to API 594 as required as per technical specification.
-
-
-
200 mm dia
1
-
-
150 mm dia
3
-
-
100 mm dia
1
-
-
65 mm dia
2
-
-
Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating complete with CI body, EPDM liner,SS disc, duly ISI marked with flanges, bolts, nuts, washers etc. as required as per technical specification and conforming to IS 13095/API 609.
-
-
-
200 mm dia
2
-
-
150 mm dia
15
-
-
100 mm dia
32
-
-
80 mm dia
13
-
-
65 mm dia
2
-
-
40 mm dia
19
-
-
Supply,installation,testing and commissioning of gun metal fire hydrant valve,single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange,ISI marked and conforming to IS:5290 (Type -A) complete with cast iron wheel, blank cap,Chain etc as required as per the technical specification.
47
-
-
Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required as per technical specification.
(a) 30 m. long 20 mm (nominal internal dia) water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 (b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe and socket.
31
-
-
Supply, installation, testing and commissioning of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. ISI marked and conforming to IS 636 (type-A) as required as per the technical specification.
94
-
-
Supply, installation, testing and commissioning of 63 mm dia Gun metal short branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle ISI marked and conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per technical specification.
47
-
-
Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per the technical specifications. It shall be inscribed with the word: "FIRE HOSE CABINET" of letter size 75 mm in height and 12 mm in width.
47
-
-
Supply, installation, testing and commissioning of 4 way Fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 150 mm dia MS/GI pipe connection conforming to IS 904 with 150 mm flanged out let connection and built in check valves complete as required as per technical specification.
3
-
-
Supply, installation, testing and commissioning of 25mm Air release valve as per IS:14845, ISI Marked, complete as required as per technical specification.
15
-
-
Providing, Installation, testing and commissioning of Y strainer with CI body, 3 mm perforated SS screen, flanged end connection, PN 1.6 rating of following size confirming to IS specifications complete with gaskets, seal and accssesories as required as per the technical specification.
-
-
-
200 mm dia
2
-
-
Providing, fixing, testing & commissioning of sprinkler of the following type :
-
-
-
Providing, fixing, testing & commissioning of UL listed &FM approved sprinkler-Standard response, standard coverage sprinkler, pendant type sprinkler ;1/2" NPT, K -80, Chrome Finish; operating temperature at 68 deg. C. complete with rosette plate and required accessories etc as required as per the technical specification.
1353
-
-
Providing, fixing, testing & commissioning of UL listed &FM approved sprinkler-Standard response, standard coverage sprinkler, upright type sprinkler ;1/2" NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. complete with required accessories as per the technical specification.
849
-
-
Providing, fixing, testing & commissioning of UL listed &FM approved sprinkler-Standard response, standard coverage Horizontal Side Wall Sprinkler, 1/2" NPT, K-80; operating temperature at 68 deg. C. complete with rosette plate and required accessories as required as per the technical specification.
250
-
-
Supply, installation, testing and commissioning of UL listed flow switch which shall be of Paddle type with SPDT contacts, with fixing accessories suitable for nominal pipe dia meters ranging from 1" to 6". The material of the construction of the paddle shall be of stainless steel or copper alloy. The body of the flow switch shall be water proof with IP55 class protection. There shall be inbuilt settings to adjust the flow rate and alarm retard time. The flow switch should have minimum withstand pressure of 15Kg/cm2 and operating pressure ranging from 3.5kg/cm2 to 10Kg/cm2. complete as required as per the technical specification.
19
-
-
Supply, installation, testing and commissioning of 1m unbraided flexible drop (UL listed /FM approved) to position the sprinkler head in desired location in suspended ceilings. The unit must be complete with stainless steel flexible drop with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, square bar,center bracket, stockbar of following sizes complete as required as per the technical specification.
772
-
-
Supply, Installation, Testing and Commissioning of 150mm dia alarm valve (installation control valve) of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete as required as per the technical specification.
3
-
-
PORTABLE FIRE EXTINGUISHERS
Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder (90 %MAP) as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2018 with ISI mark, complete as required as per the technical specifications.
60
-
-
Supply and installation of Carbon-dioxide extinguisher of ISI marked (IS 15683 latest) 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas. complete as required as per the technical specification.
9
-
-
Providing and fixing initially fully charged ISI marked Portable Fire Extinguisher of 9 L capacity, foam extinguisher conforming to IS 15683:2018 and complete with necessary accessories as required as per the technical specifications.
4
-
-
Supply and installation of ISI marked Clean agent type fire extinguisher of 2kg capacity conforming to IS 15683 latest. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, and wall bracket complete in all respect as per technical specification.
6
-
-
FIRE DETECTION AND ALARM SYSTEM
Supply, installation, testing and commissioning of Addressable type Multi Detector (photoelectric cum rate of rise temperature type) complete with all accessories like base. base box, etc. to be installed under/above false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required as per the technical specification. Shall be UL listed & FM Approved.
1340
-
-
Supply, installation, testing and commissioning of UL listed & FM approved Addressable type Manual Call Point Re-setable type via special key (non-breaking glass type) with push button, enclosed in box with provision for cable or conduit coupling; complete as required as per the technical specification.
45
-
-
Supply, installation, testing and commissioning of wall sounder beacon at different locations complete for both audio and visual indication with all fixing accessories, etc. under false ceiling, roof, wall, etc, with a time delay of max 30sec, interconnecting loop cable complete with necessary modules for addressable detection as required as per the technical specification.Shall be UL listed/ FM Approved.
45
-
-
Supply, installation, testing and commissioning of UL listed/ FM approved fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable complete as required as per technical specification.
90
-
-
Supply of LED Response indicator for all detectors located above false ceiling, with low profile, white case and shall not exceed 2.5 inches of extension below the finish ceiling, complete as required as per the technical specification.
411
-
-
Supply, installation, testing and commissioning of wall mounted talk back unit for two way communication of fire fighters with all necessary accessories complete as required as per the technical specification.
13
-
-
Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required as per the technical specification.
19
-
-
Supply, installation, testing and commissioning of UL listed/FM approved public address and talk back system (Talk back master panel for two way communication) consisting of 6-30 zone expandable public address cum talkback master console with mike and selector. Multiple channel talk back master control panel shall be with 2x16 character LCD display,power supply, battery charger, battery housing,minimum 80 W PA & mic, multiple channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.Shall consist of required zone, voice alarm controller with USB, MP3 player (including multiple zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
Supplying, installation, testing and commissioning of UL listed & FM approved microprocessor based 10 looped intelligent addressable main fire alarm panel, central processing unit with the required number of loop modules (considering 20% spare capacity in each loop) and capable of supporting not less than 240 devices (including detectors) and minimum 150 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. 10 loops (each loop accessing at least 150 detectors and 240 devices, loop length upto 2 km) .The panel shall be microprocessor based with its own micro controller, memory, communication module and fire device loop interface cards for indicating devices and should also be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels.The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches when ever any Alarm is triggered.The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit,etc complete in all respects. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (PA-talkback System) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per the technical specifications.The Panel shall also have Logic hardware and software built into it for time delay operation of hooter and others as follows :(a) programming software for the system(b) automatic system test activates(c) detector sensitivity adjustments(d) alarm verification (e) Alpha/numerical display (f) provision to connect to PCs and external printers.
1
-
-
Supply, installation, testing and commissioning of intelligent addressable Input module for monitoring purpose and send the signal from a flow switch to the alarm panel for initiating alarm when flow occurs. Shall be UL listed/ FM Approved complete as required as per the technical specification.
19
-
-
Supplying, installation, testing & commissioning of UL listed/ FM approved addressable fire control module, to automatically trigger on/off devices like jet fans, AHU, extract air fans etc in case of fire,complete as required as per the technical specification.
45
-
-
Supply, installation, testing and commissioning of addressable type (or conventional with addressable module) 24v 2A Power supply unit for hooters with battery backup. The status of the power supply unit must be monitored from the FACP and alarm shall be obtained if the power supply unit fails to operate.The product must be CE/FCC approved, complete in all respect and as required as per the technical specification.
16
-
-
Supply, installation, testing and commissioning of UL listed & FM approved Repeater Panel for Fire Alarm System with piezo sounder, LCD alpha numeric character display with accept / reset buttons for alarm address of any sensor / field device. The Repeater Panel shall only provide field device address with room number. Analogue Output is not required. The Panel shall be connected to the Fire Alarm Panel, complete as required as per the technical specification
1
-
-
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above/below ground complete as required as per the technical specifications.
8368
-
-
Supplying and drawing of ISI marked speaker cable Single pair, 2-core, 1.5 sqmm Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit including connections and interconnections etc. as required as per technical specification.
1751
-
-
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required as per the technical specification.
179
-
-
CO2/Clean agent Linear heat detection/trace tube PANEL/modular FLOODING SYSTEM FOR ELECTRICAL PANELS consisting of gas cylinders with weight calculated on the basis of volume of single largest compartment within the panel. UL listed trace tube of required design length, with suitable capacity cylinder (One number),also consisting of master control unit with digital display, load cell, discharge hooter/flashers, pressure gauges, pressure switches for low pressure/discharge indications & interlocks with fire alarm system of the premises & all accessories of complete functionality of system, complete as required as per the technical specification.
2
-
-
SIGNAGE
Supply and installation of photoluminescent glow signage such as Fire Duct/Fire Lift/Staircase signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
57
-
-
Supply and installation of photoluminescent glow signage for "FIRE ASSEMBLY POINT" of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
2
-
-
Supply and installation of photoluminescent glow signage for "FIRE ORDER" of standard size (500*800 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
19
-
-
Supply and installation of photoluminescent glow signage such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
31
-
-
Supply and fixing (in appropriate location) of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification and conforming to IS 9457, IS12349, IS12407. Evacuation Plan shall be prepared by the contractor.
19
-
-
Main Fire Pump Panel
Supply, Installation, Testing and Commissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised form4b construction, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with bus bars extendable on both sides, including all the necessary internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates (required for short circuit rating, temperature rise test and IP classification) with following switchgears, metering instruments and accessories etc.complete in all respect as per drawing and technical specification. The panel shall be with top entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram.Panel should be Top/Bottom Entry. Incomer MCCB isolator FP 320A
Busbar 400A TPN Al Busbar
Instruments -Voltmeter with VSS (0-500V) Acc. class 1 with 90 deg defl. Scale -1no, Ammeter (0-320A) Acc. class 1 with 90 deg defl. Scale-3 nos, 4A SP C curve MCB-3nos, RYB indication-1 set, CT 320/5A Cl1 -1set
Outgoing -MCCB isolator FP 100A - 3nos, MCCB isolator FP 40A -2nos, DP MCB 25A - 2nos,
Star-Delta starter suitable for 37.5kW motor with ON/OFF push button and indicators with Auxiliary and power contactors-2nos
Star-Delta starter suitable for 9.3kW motor with ON/OFF push button with and indicators with Auxiliary and power contactors-2nos
Space provision for fixing 3 phase DOL /star-delta starter with on/off push button, auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets - 1no
Auto Manual Selector Switch with Control wiring for Main & Jockey Pump, Annunciator with hooter accept / reset & control wiring, Above panel to be supplied with 2x12 V, 180 AH battery charger and control wiring to provide control power supply in case of power failure. Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per technical specification.
1
-
-
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3C 10 sqmm Al
40
-
-
3C 50 sqmm Al
60
-
-
2C 2.5 sqmm Cu
10
-
-
3.5C 185 sqmm Al
75
-
-
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3C 10 sqmm Al
8
-
-
3C 50 sqmm Al
8
-
-
2C 2.5 sqmm Cu
2
-
-
3.5C 185 sqmm Al
4
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Cable size upto 35sq mm
35
-
-
Above 35 sq.mm upto 95 sq.mm
40
-
-
Above 95 sq.mm upto 185 sq.mm
5
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Cable size upto 35sq mm
15
-
-
Above 35 sq.mm upto 95 sq.mm
20
-
-
Above 95 sq.mm upto 185 sq.mm
5
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Above 95 sq.mm upto 185 sq.mm
55
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Above 95 sq.mm upto 185 sq.mm
10
-
-
Fabrication, supply and installation of following size of Ladder type GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
-
-
-
150 mm width X 75 mm depth X 2 mm thickness
5
-
-
300mm width X 75 mm depth X 2 mm thickness
5
-
-
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
10
-
-
Design, fabrication, supply, Installation ,testing and commissioning of electric traction type with machine roomless type , Stainless steel 26 Pax(1768 Kg) Hospital elevator with car size of 1600mm(width) X 2400 mm(depth) (minimum) (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.Lift shall be Complete with all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with lever operated (independent of any battery system) .The traction motor of machine roomless elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening SS door, stainless steel car enclosure provided with stainless steel handrails on two sides as applicable in accordance of following details:-3 stops & 3 openings and entrance & exit at same side and suitable for travel height of 8.4 mtrs. (Shaft Size 2800mm (width) x 3300mm (depth) ) with door opening of 1200mm (width) and 2100 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All fabrication and procedures shall confirm to relevant IS standards.
4
-
-
Design, fabrication, supply, Installation ,Testing and Commisioning of electric traction type with machine roomless type , Stainless steel 26 Pax (1768 Kg)Hospital elevator with car size of 1600mm(width) X 2400 mm(depth) (minimum) (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, duplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.Lift shall be Complete with all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with lever operated (independent of any battery system)The traction motor of machine roomless elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening SS door, stainless steel car enclosure provided with stainless steel handrails on two sides as applicable in accordance of following details:-7 stops & 7 openings and entrance & exit at same side and suitable for travel height of 25.5 mtrs. (Shaft Size 2550mm (width) x 3000mm (depth) ) with door opening of 1200mm (width) and 2100 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
Design, fabrication, supply Installation ,Testing and Commisioning of electric traction type with machine roomless type , Stainless steel 250Kg capacity Dumb Waiter elevator (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of minimum 0.3 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, overload warning indicator, LED type emergency light, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,brailiy buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.Lift shall be Complete with all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with lever operated (independent of any battery system).The traction motor of machine roomless elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having vertical bi-parting opening SS door with handles, stainless steel car enclosure as applicable in accordance of following details:-2 stops & 2 openings and entrance & exit at same side and suitable for travel height of 8.5 mtrs. (Shaft Size 1500mm (width) x 1200mm (depth) ) with door opening of suitable size. All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
Supply, Laying, Testing,Termination and commissioning of U/UTP cable - Category 6 , 4 pair, 23 AWG solid copper conductor, 600 MHz, CMR- with Fluke DTX 1800 Cable Analyser through existing conduits including termination, numbering tags ,Cable ties, ferrules and all accessoreis required as per specification.
10000
-
-
Supply, Laying, Testing,Termination and commissioning of U/UTP cable - Category 6A , 4 pair, 23 AWG solid copper conductor, 600 MHz, CMR- with Fluke DTX 1800 Cable Analyser through existing conduits including termination, numbering tags ,Cable ties, ferrules and all accessoreis required as per specification.
15000
-
-
Supply and laying of 2 core 1.5sq.mm FRLSZH speaker cable with all accessories as per the specification.
8000
-
-
Supply and laying of RG 6 Coaxial Cable with all accessories as per specification.
700
-
-
Supply and Laying of PVC cable channel 45mmx 45mm as per specification
200
-
-
Supply & Laying of 25mm PVC Conduit with all accessories as per specification.
16000
-
-
Supply and laying of steel wire mesh cabel tray - hot dip galvanised of the following sizes with all the necessary accessories as required as per specification.
-
-
-
105mm(H) x 100mm(W)
300
-
-
105mm(H) x 200mm(W)
300
-
-
105mm(H) x 300mm(W)
900
-
-
Supply and Laying of armoured Single mode 6C Fibre Optic cable indoor / outdoor through existing conduit with all accessories in surface as per specification.
2250
-
-
Supply and Laying of 32mm HDPE Pipe (ISI marked of class B medium) in ground including excavation, sand cushioning, protective covering and refilling the trench etc with all accessories required at site as per specification.
250
-
-
Supply, Installation, Testing and Commisssioning including termination of CAT6 Information Outlet for Data/Voice , RJ 45with all accessories as required in complete as per specification.
275
-
-
Supply, Installation, Testing and Commisssioning including termination of CAT6A Information Outlet for Data/Voice , RJ 45with all accessories as required in complete as per specification.
375
-
-
Supply, Installation, Testing and Commisssioning of Concealed Metal Back Box for CAT 6 information outlet.
325
-
-
Supply, Installation, Testing and Commisssioning of PVC Back Box for CAT 6 information outlet.
50
-
-
Supply Installation, Testing and Commisssioning of Face Plate Dual Shuttered with all accessories required as per specification
275
-
-
Supply Installation, Testing and Commisssioning of Face Plate Single Shuttered with all accessories required as per specification
100
-
-
Supply and installation of CAT6 Patch Cord with end terminaiton for voice with all accessories required as per specification.
-
-
-
1m Patch cord
275
-
-
Supply and installation of CAT6A Patch Cord with end terminaiton with all accessories required as per specification.
-
-
-
1m Patch cord
375
-
-
2m Patch Cord
310
-
-
Supply,Installation,Testing and Commissioning of 24 port modular CAT6A Patch Panel - fully loaded as per specification.
25
-
-
Supply,Installation,Testing and Commissioning of Core Switch with all necessary hardware & accessories, etc. as per specification.
2
-
-
Supply,Installation,Testing and Commissioning of 24 Port - Stackable switch 10/100/1000Base-TX ports with 4 SFP Ports with all necessary hardware & accessories, etc. as per specification.
25
-
-
Supply,Installation,Testing and Commissioning of 42U Rack as per specification.
2
-
-
Supply,Installation,Testing and Commissioning of 15U Rack as per specification.
18
-
-
Supply and fixing of Casing and Capping of size 25 x 16 mm on surface as required.
250
-
-
Supply, Installation,Testing and Commissioning of 12 Port LIU Fully loaded with Pigtails , connectors and splice tray with all accessories required at site as per specification
37
-
-
Supply, Installation,Testing and Commissioning of SM SC-LC Duplex fiber Patch Cord, with all accessories required at site as per specification
74
-
-
Supply, Installation,Testing and Commissioning of 10G SC-LC Transceiver module as per specification
36
-
-
Supply, Installation,Testing and Commissioning of 1G SC-LC Transceiver module as per specification
38
-
-
Supply and Installation of WLAN AP(Access Point) with 3x3 MIMO, PoE Ethernet port, 4 internal antennas with centralised controlling facility including licenses and Ceiling mount bracket with all other accessories as required.
40
-
-
Supply, Installation, testing and commissioning of varifocal IP dome camera (2 MP) with ceiling/wall mount brackets and all other required accessories as per specification.
48
-
-
Supply, Installation, testing and commissioning of fixed IP dome camera (2 MP) with ceiling/wall mount brackets and all other required accessories as per specification.
14
-
-
Supply, Installation, testing and commissioning of 16 Port 10/100/1000 Mbps PoE Switch with 2X1G SFP ports with all required accessories as per specification.
19
-
-
Supply, Installation, testing and commissioning of 24 port Fiber switch with 24x1G SFP ports as per specification.
1
-
-
Supply, Installation, testing and commissioning of 8TB hard disc (for Video Storage) as per specification.
8
-
-
Supply,Installation, testing and commissioning of 64 Channel Network Video Recorder with licences for 64 cameras as per specification.
1
-
-
Supply, installation, testing and commissioning of HDMI Cable 10 m, as per specification
2
-
-
Supply, Installation, testing and commissioning 42" LED display with HDMI and VGA output with all required accessories as per specification.
2
-
-
Supply,Installation,Testing and Commissioning of 6W Ceiling mount Speaker as per the detailed technical specifications.
287
-
-
Supply,Installation,Testing and Commissioning of 6W Wall mount Speaker as per the detailed technical specifications.
241
-
-
Supply,Installation,Testing and Commissioning of 60W Power amplifier with all accessories as per the specification.
2
-
-
Supply,Installation,Testing and Commissioning of 240W Power amplifier with all accessories as per the specification.
15
-
-
Supply,Installation,Testing and Commissioning of 480W Power amplifier with all accessories as per the specification.
4
-
-
Supply, Insatallation, Testing and Commissioning of 6 zone call station with paging microphone with multi tone chime as per specification.
7
-
-
Supply, Installation, Testing & commissioning of Public Address System Controller complete with 6 Zone Call Station, Stem Type Microphone, Inbuilt 240W Amplifier, Dual Tone Control for Speech & Music, integration facility with Fire Alarm System as specified in the Tender Specifications . The rate inclusive of Priority module, selector switch etc.
1
-
-
Supply,Installation,Testing and Commissioning of 6W Wall mount Speaker as per the detailed technical specifications.
8
-
-
Supply,Installation,Testing and Commissioning of Lavalier Mic with transmitter and receiver as per the specification.
1
-
-
Supply,Installation,Testing and Commissioning of 4U wall mount rack with all accessories required as per specification.
1
-
-
Supply, Installation, Testing and Commissioning of Ceiling mount LCD Projector with 3000 lumens Brightness, XGA Resolution and 5000hrs Lamp life and with all other accessories required as per specification.
1
-
-
Supply,Installation,Testing and Commissioning of Visual Presenter as per specification.
1
-
-
Supply,Installation,Testing and Commissioning of 15m Projector Cable as per specification.
1
-
-
Supply,Installation,Testing and Commissioning of Media Player as per specification.
1
-
-
Supply,Installation,Testing and Commissioning Ceiling Mount kit for projector as per specification.
1
-
-
Supply,Installation,Testing and Commissioning 6 x 4 White Board as per specification.
1
-
-
Supply,Installation,Testing and Commissioning 6 x 4 motorised White Projector Screen as per specification.
1
-
-
Supply, installation, testing and commissioning of IP BAsed EPABX , 19" Rack type Survivable IP Based Media Gateway to communication server via the internal IP network infrastructure as per specification equipped for the following: 300 Analogue Lines, 8 IP Extensions (SIP), 1 ISDN PRI Line Interface, 4 Analog trunk Line Interfaces including operator console as per specification.
1
-
-
Supply, installation, testing and commissioning of 200 Pair MDF Box with Krone Modules with all accessories as required at site as per specification
1
-
-
Supply, installation, testing and commissioning of 100 Pair MDF Box with Krone Modules with all accessories as required at site as per specification
1
-
-
Supply and laying of Category 3 - 25 pair indoor riser cable with all accessories as required at site as per specification
1500
-
-
Supply, instalaltion, testing and commissioning of 50 port voice patch panel with required number of krone modules as required as per specification
19
-
-
Supply Installation, Testing and Commisssioning of Analogue Phones as per specification.
269
-
-
Supply, Installation, Testing and Commisioning of 8-way Splitter box for TV cable termination including all necessary hardware, accessories, etc. as per specification.
2
-
-
Supply and installation of 32" LED TV as per specification.
14
-
-
Supply, Installation, testing and commissioning of LED Matrix Display - 10 inch with all required accessories as per specification.
12
-
-
Supply, Installation, testing and commissioning of Thermal Printer with all required accessories as per specification.
5
-
-
Supply, Installation, testing and commissioning of Barcode Scanner with all required accessories as per specification.
12
-
-
Supply, installation , testing and commissioning of Server Hardware Intel® Xeon® Gold 6142 Processor or higher,Intel C621 Chipset,8 SSF drive bay RAID control 2GB, support speed of 12GBPS,SAS Harddisk of 1.2TB X 4 No's of 12GBPS,16 GB Memory,Raid Controller with 2GB RAM,supporting 0,1,5,10 with 12G 500W dual Supply,16MB Video Memory,Microsoft® Windows Server® 2016 and Microsoft SQL enterprise server 2012 or higher HBA Card with 8Gb Single Port Fibre Channel Host Bus Adapter,PCE 3.0 slots ,USB 3, Display 21" FHD ,Mouse and keyboard, Antivirus. as per specification.
1
-
-
Supply, Installation, testing and commissioning of Firewalls Cum router with antivirus and 400 user licenses as per specification.
1
-
-
Supply, installation, testing and commissioning of Intel Core i5-5300, 4GB DDR3 Ram, 500 GB HDD, R/W DVD Writer, with original windows OS 18.5" LED Monitor.
2
-
-
Supply,Installation,Testing and Commissioning of Bio-metric Attendace Register Device as per specification.
4
-
-
Supply, Installation, testing and commissioning of Nurse Call System for all wards and rooms with centralised monitoring facility and nurse call management software including processor, monitor, multiplexers, 350 bed side call units, 100 toilet call units, 20 multi-bed calling unit, LCD nurse station displays in 20 locations, 100 door indicators etc. as required as per specification.
1
-
-
Supply,Installation,Testing and Commissioning of 1 kVA UPS/230V/50Hz Single phase input and output with 1 hour back up UPS as per specification.
18
-
-
Supply,Installation,Testing and Commissioning of 5 kVA UPS/230V/50Hz Single phase input and output with 1 hour back up UPS as per specification.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements