KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_KITCO_245148_1Bid Award Id
ViewTender No
HFWD/KITCO/EL/01/2018Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
PART -B
TRANSFORMERS AND DG SETS
11KV/0.433KV, 1600KVA Dry Type Transformer
Design, fabrication and supply of Indoor type 1600 kVA, 11kV/433V 3 Ph, 50 Hz, dry type, vector DYN-11 Transformer, copper wound, Class F insulation, indoor distribution Transformer with IP23 enclosure. The transformer shall connected Delta on HV side and Star on LV side with On Load Tapp Changer in steps of + 5% to -15% in steps of 2.5 with RTCC and AVR. The transformer shall have neutral CT with suitable enclosure on earthed star point with connector for connection to low set earth fault relay, REF relay provided in HT/LT panel, winding temperature alarm and trip, The enclosure shall be IP 23 protection and having HV cable box suitable for termination of HT XLPE cable and LV chamber suitable for termination of busduct and complete with all standard fittings and accessories etc including necessary louvers with cooling fan/duct as required complete and as per specifications attached in all respects as required and necessary control cabling for alarm, tripping & indication as required. The rate shall be inclusive of all materials, lead, lift, etc. complete as per single line diagram & particular specification. Voltage Ratio: 11/0.433 kV
Type of Winding: Copper
Fittings: Standard fittings as per IS:2026/77 and IS as per IS 11171 : 1985.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 1 of 10 and technical specification for more details)
2
-
-
1010 KVA DG SET Supply, Installation, Testing and Commissioning of Indoor type 1000KVA ( or nearest higher rating ) water cooled, radiator type, four stroke, electric start Prime duty D.G Set with acoustic enclosure CPCB II Compliant and control panel. The DG shall have standard control panel suitable for Synchronisation & AMF operation from the MSB panel. The alternator shall be brushless, self excited, self regulated, suitable for continuous operation at 1500 rpm, generating 415 V +/- 1% at 0.8 p.f, 50Hz, 3 phase, 4 wire system generally conforming to BS: 5514 & ISO: 3046. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as antiviberation pad, maintenance free batteries ( or as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, (A seperate battery charger shall also be supplied along with each DGset), seperate fuel tank for each DG set suitable for 8 hours of operation fuel pipe from fuel tank to Engine, Residential silencer, Exhaust stack with insulation and necssary structural support ,aluminium cladding up to a height above the top of building as per statutory norms, , suitable size cable termination box, etc. as per single line diagram & technical specification. Rate shall be inclusive of all lift, lead etc. The work should be as per Electrical Inspectorate / Pollution control board norms.The control panel shall be suitable for synchronous operation and have suitable rated electrically drawout ACB for over current and earth fault protection. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as antiviberation pad, 12V maintenance free batteries ( or as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand. (A seperate battery charger shall also be supplied along with DGset)
1
-
-
500 KVA DG SET
Supply, Installation, Testing and Commissioning of Indoor type 500KVA ( or nearest higher rating ) water cooled, radiator type, four stroke, electric start Prime duty D.G Set with acoustic enclosure CPCB II Compliant and control panel. The DG shall have standard control panel suitable for Synchronisation & AMF operation from the MSB panel. The alternator shall be brushless, self excited, self regulated, suitable for continuous operation at 1500 rpm, generating 415 V +/- 1% at 0.8 p.f, 50Hz, 3 phase, 4 wire system generally conforming to BS: 5514 & ISO: 3046. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as antiviberation pad, maintenance free batteries ( or as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, (A seperate battery charger shall also be supplied along with each DGset), seperate fuel tank for each DG set suitable for 8 hours of operation fuel pipe from fuel tank to Engine, Residential silencer, Exhaust stack with insulation and necssary structural support ,aluminium cladding up to a height above the top of building as per statutory norms, , suitable size cable termination box, etc. as per single line diagram & technical specification. Rate shall be inclusive of all lift, lead etc. The work should be as per Electrical Inspectorate / Pollution control board norms. The control panel shall be suitable for Synchronous Operation and shall have suitable rated electrically drawout ACB for over current and earth fault protection. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as antiviberation pad, 12V maintenance free batteries ( or as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, (A seperate battery charger shall also be supplied along with DGset).
1
-
-
PART -C
TPN SANDWICH BUS DUCT / BUS RAISERS
415V , 2500A TPN SANDWITCH BUSDUCT
Supply of 2500A ,415V, 50 kA, 50Hz AC TPN Sandwich Aluminum Bus Duct with 100% neutral Bus made out of 14 SWG powder coated and painted extruded Aluminium IP54 enclosure, flexible end termination, fittings & accessories like elbows, offset sections, tees, reducers, adaptor boxes, flanges, flexible connections , expansion joints, ground strips , suitable supporting arrangement with metal suspenders/ brackets ,provison for fixing 2 runs of 25x6mm Cu earth strip throughout the length of busduct etc. as required complete. (The rate shall be quoted for running meter and the elbows, bends, adaptor boxes are also measured under running meter and the rate shall be inclusive all assosiated accessories)(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 1 of 10 and technical specification for more details)
30
-
-
415V , 1600A TPN SANDWITCH BUSDUCT
Supply of1600A ,415V, 50 kA, 50Hz AC TPN Sandwich Aluminum Bus Duct with 100% neutral Bus made out of 14 SWG powder coated and painted extruded Aluminium IP54 enclosure, flexible end termination, fittings & accessories like elbows, offset sections, tees, reducers, adaptor boxes, flanges, flexible connections , expansion joints, ground strips , suitable supporting arrangement with metal suspenders/ brackets ,provison for fixing 2 runs of 25x6mm Cu earth strip throughout the length of busduct etc. as required complete. (The rate shall be quoted for running meter and the elbows, bends, adaptor boxes are also measured under running meter and the rate shall be inclusive all assosiated accessories)(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details) and technical specification for more details)
18
-
-
415V , 630A TPN SANDWITCH BUSDUCT
-
-
-
Supply of 630A ,415V, 50 kA, 50Hz AC TPN Sandwich Aluminum Bus Duct with 100% neutral Bus made out of 14 SWG powder coated and painted extruded Aluminium IP54 enclosure, flexible end termination, fittings & accessories like elbows, offset sections, tees, reducers, adaptor boxes, flanges, flexible connections , expansion joints, ground strips , suitable supporting arrangement with metal suspenders/ brackets ,provison for fixing 2 runs of 25x6mm Cu earth strip throughout the length of busduct etc. as required complete. (The rate shall be quoted for running meter and the elbows, bends, adaptor boxes are also measured under running meter and the rate shall be inclusive all assosiated accessories)(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 7 of 10 and technical specification for more details)
178
-
-
Tap of Unit with MCCB (Plug in box) 63A, 50kA 4P Thermal magnetic release type MCCB suitable for sandwich type busduct.
6
-
-
Tap of Unit Tap of Unit with MCCB (Plug in box) 100A, 50kA 4P Thermal magnetic release type MCCB suitable for sandwich type busduct.
1
-
-
Tap of Unit Tap of Unit with MCCB (Plug in box) 160A, 50kA 4P Thermal magnetic release type MCCB suitable for sandwich type busduct.
15
-
-
Tap of Unit Tap of Unit with MCCB (Plug in box) 400A, 50kA 4P Thermal magnetic release type MCCB suitable for sandwich type busduct.
1
-
-
PART -D
LT PANEL BOARDS AND ACCESSORIES
MSB CUM SYNCHRONIZATION PANEL
Supply, installation, testing & commissioning of totally enclosed free standing floor mounting dust & vermin proof indoor cubicle type IP42 panel board conforming to form 4B construction suitable for 415V, 3 phase, 50Hz supply with provision for fixing incoming & outgoing switches fabricated using 2 mm MS sheet powder coated with necessary cable alley & bus bar chamber for all switches. The panel shall be with all accessories as per drawing & specification. (Refer particular specification and drawing Drawing No.DP 667 DRG EL 02 002 Sheet 1 of 10 and technical specification for more details for details).
Incomer-1 from Transformer -1 -2500A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 No., (0-2500)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos., 6A 3 pole voltmeter selector switch - 1 No., 2500/5A 15VA class 1 resin cast CT - 3nos, 2500/5A 15VA class 1 resin cast CT - 1 set for APFC relay for capacitor panel, Digital power analyser/meter having RS 485 communication facilities - 1No., 2500/5A 15VA class PS resin cast CT - 5no.s(For REF)
Incomer-2 for Transformer -2 -2500A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 No., (0-2500)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos., 6A 3 pole voltmeter selector switch - 1 No., 2500/5A 15VA class 1 resin cast CT - 3nos, 2500/5A 15VA class 1 resin cast CT - 1 set for APFC relay for capacitor panel, 2500/5A 15VA class PS resin cast CT - 5no.s(For REF), Digital power analyser/meter having RS 485 communication facilities - 1No.
Incomer-3 for DG Set 1 - 1600A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 No., (0-1600)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos., 6A 3 pole voltmeter selector switch - 1 No., 1600/5A 15VA class 1 resin cast CT - 3nos, 1600/5A 15VA class PS resin cast CT - 5no.s(For REF), Digital power analyser/meter having RS 485 communication facilities - 1No.
Incomer-4 for DG Set 2 - 1000A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1 No., (0-1000)A ammeter Acc. class 1 with 90 deg defl. scale - 3 Nos., 6A 3 pole voltmeter selector switch - 1 No., 1000/5A 15VA class 1 resin cast CT -3nos, Digital power analyser/meter having RS 485 communication facilities - 1No., ON/OFF/TRIP indication lamp, LED type - 3 No., Pluggable type surge arrester Class B / Class 1 as per IEC 61643 (IP 20)-2set Buscoupler - 2500A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based with RS 485 communication facility - 1 No.
DG Synchronization relay-2 No.s for DG incomer (DEIF AGC 242 or equivalent approved make)and One No. for Buscoupler(DEIF AGC 244 or equivalent approved make), 2500A TPN busbar chamber with Aluminium busbar.
Out goings - 1000A, TP+NL, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 2 Nos., 800A, TP+NL, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 10 Nos., 630A, TP+NL, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 6Nos., 2A HRC fuse with base - 54Nos., RYB indication lamp, LED type - 54 Nos., Digital Multifunction meter - 18 Nos., 1000/5A 15VA class 1 resin cast CT -6 nos, 800/5A 15VA class 1 resin cast CT - 30nos, 600/5A 15VA class 1 resin cast CT -18 nos
Note:The panel shall be suitable for synchronization of two DG 's in the event of power failure as per technical specification.The cost shall be inclusive of necessary control wiring required for the synchronization of two DG's .
1
-
-
APFC Panel (400 kVAR) - I & II
Supply, Installation, Testing and Commissioning of totally enclosed, free standing, floor mounting, dust and vermin proof,indoor (IP 42) cubicle type conforming to form 4B construction capacitor panel board of total 400 KVAR capacity to be fabricated out of 2mm thick CRCA sheet steel Powder coated with provision for capacitor mounted inside the panel with adequate number of louvers and powder coated with approved shade and having following specific components(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer
1000A,TP+NL, 36 kA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 no.
1000A TPN busbar chamber with Aluminium busbars
RYB Indicating lamps LED type - 3 Nos., Volt meter with selector switch - 1No, (0-1000A) Ammeter with CTs - 1 Set(3 No.s), ON-OFF-TRIP indication lamps (LED type)- 1 Set, Auto/Manual Selector Switch-1 Set, Microprocessor based intelligent, 14step IPFC relay with PF display - 1 No.
Out goings : 250A, 25kA ,TP+NL , MCCB - 2 Nos, 125A, 25kA ,TP , MCCB - 2 Nos, 63A, 25kA ,TP+NL , MCCB - 5 Nos, 32A, 25kA ,TP+NL ,MCCB - 4 Nos, 100 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 2No.s, 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 2 No.s, 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 2 No.s, 20 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 1 No.s
15 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 1 No.s, 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF push buttons (LED type)- 3 No.s, 100 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 2 Nos,50 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 2 No, 25 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 2 Nos, 20 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 1 No, 15 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 1 Nos, 10 kVAr,480 V,50 Hz heavy duty dry type capacitor(APP-H) with 7 %Series reactor- 3 No
2
-
-
AC Plant MCC
Supply, Installation, Testing & Commissioning of AC Plant MCC , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, conforming to form 4B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 3 of 10 and technical specification for more details ).
Incomer - 800A, TP+NL, 35 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 Nos.
2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-800)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 800/5A ,Class 1,15VA class 1 resin cast CT -3 Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 800A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 400 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection -3 Nos, 160 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 3 Nos
1
-
-
AC Auxillary MCC
Supply, Installation, Testing & Commissioning of AC Auxillary MCC , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 3 of 10 and technical specification for more details ).
Incomer - 160 A, TPN, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 Nos, 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-160)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 160/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 160A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 63 A, TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 4 Nos, 32 A, TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 4 Nos, 12.5 HP Star Delta starter with Contactor , Bimetallic Relay , Timer with ratings suitable for Type -2 Cordination )- 3 Nos, 7.5 HP Star Delta starter with Contactor , Bimetallic Relay , Timer with ratings suitable for Type -2 Cordination )- 3 Nos, On-off LED type indication lamp-6 set
1
-
-
HVAC Panel - Supply, Installation, Testing & Commissioning of HVAC Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, conforming to form 4B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars, including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 3 of 10 and technical specification for more details ).
Incomer - 400 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 Nos
2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-400)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 400/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 400A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 250 A, TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1Nos, 125 A, TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -3Nos, 100 A, TPN, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 3Nos
1
-
-
AC-SSB-OP-GF (SSB) - Supply, Installation, Testing & Commissioning of AC-SSB-OP-GF (SSB) , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 4 of 10 and technical specification for more details ).
Incomer - 250 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 Nos, 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-250)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 250/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 250A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 32 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 No., 63 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 9 Nos
1
-
-
EQUIPMENT -SSB
Supply, Installation, Testing & Commissioning of EQUIPMENT (SSB) , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, conforming to form 4B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 6of 10 and technical specification for more details ).
Incomer- 800A, TP+NL, 35 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 No.
2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-800)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 800/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 800A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 250 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -5 Nos, 125 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -3Nos
1
-
-
UPS Switch Board- Supply, Installation, Testing & Commissioning of UPS Switch Board, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 7 of 10 and technical specification for more details ).
Incomer - 800A, TP+NL, 35 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 2 Nos., 2A HRC fuse with base - 6 Nos., RYB indication lamp, LED type - 6 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 2No., (0-800)A ammeter Acc. class 1 with 90 deg defl. scale - 2No.s, 800/5A 15VA class 1 resin cast CT -6Nos, 6A 3 pole voltmeter selector switch - 2 No., 6A 3 pole Ammeter selector switch - 2 No., Multifunction meter - 2Nos, Busbar - 800A ,35 kA TPN busbar chamber with Aluminium busbar
Buscoupler-800A, TPN 35 KA, Electrical Draw Out type ACB with microprocessor having RS 485 communication facility - 1 No.
Outgoings - 400 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 2 Nos, 250 A, TP+Nl, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 2 Nos
1
-
-
UPS-SSB-EQP-OP-GF - Supply, Installation, Testing & Commissioning of UPS-SSB-EQP-OP-GF , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications..(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 7 of 10 and technical specification for more details ).
Incomer - 400 A, TP+Nl, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 Nos, 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-400)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 400/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 400A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 250 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 2Nos, 125 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 3Nos
1
-
-
LP- Substation - Supply, Installation, Testing & Commissioning of LP- Substation , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 9 of 10 and technical specification for more details ).
Incomer -125 A,TP+NL , MCCB isolator - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-125)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 125/5A 15VA class 1 resin cast CT -3 No.s, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 125A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 32 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 5Nos
1
-
-
LPSSB (LPSSB-OP-GF, LPSSB-OP-FF, LPSSB-OP-SF, LPSSB-IP-GF, LPSSB-IP-FF, LPSSB-IP-SF) - Supply, Installation, Testing & Commissioning of Lighting Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, ,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet No.8 of 10,9 of 10 and technical specification for more details ).
Incomer - 125 A,TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 2 Nos, 2A HRC fuse with base - 6 Nos., RYB indication lamp, LED type - 6 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 2Nos., (0-125)A ammeter Acc. class 1 with 90 deg defl. scale - 2Nos., 125/5A 15VA class 1 resin cast CT -6 Nos, 6A 3 pole voltmeter selector switch - 2 No., 6A 3 pole Ammeter selector switch - 2 No.
Busbar - 125A ,35 kA TPN busbar chamber with Aluminium busbar
Buscoupler - 125 A, FP, 36kA, MCCB with adjustable thermal magnetic release - 1 No.
Outgoings - 40 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -12 Nos
6
-
-
Street Lighting Panel - Supply, Installation, Testing & Commissioning of Street Lighting Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer - 125 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 Nos
2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-125)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 125/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 125A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 63 A, FP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -5 Nos
1
-
-
Utility Panel -1
Supply, Installation, Testing & Commissioning of Utility Panel-1, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer - 630 A, TP+NL, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-630)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 600/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No, 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 630A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 160 A, TP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -4 Nos, 125 A, TP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 4 Nos
1
-
-
Utility Panel -2 - Supply, Installation, Testing & Commissioning of Utility Panel-2, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, ,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer - 800A, Four pole, 35 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, RS 485 communication facility - 1 Nos., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-800)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 800/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 800A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 400 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection -3 Nos, 125 A, TP+NL, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 4 Nos
1
-
-
Pump Panel - Supply, Installation, Testing & Commissioning of Pump Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer 125 A, TP MCCB Isolator - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-125)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 125/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 125A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 15 HP Star Delta starter with Contactor , Bimetallic Relay , Timer with ratings suitable for Type -2 Cordination )- 4 Nos , 7.5 HP Star Delta starter with Contactor , Bimetallic Relay , Timer with ratings suitable for Type -2 Cordination )- 2 Nos, 63 A, TPN, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 6 Nos, 32 A, TP, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 2 Nos, ON/OFF/TRIP indication lamp, LED type - 6 sets
space provision for starters
1
-
-
Lift Panel-1 &2
Supply, Installation, Testing & Commissioning of Lift Panel-2 , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised,,conforming to form 4 B construction suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars, including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications..(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
Incomer - 125 A, TPN, MCCB Isolator - 1 No., 2A HRC fuse with base - 3 Nos., RYB indication lamp, LED type - 3 Nos., (0-500)V voltmeter, Acc. class 1 with 90 deg defl. scale - 1Nos., (0-125)A ammeter Acc. class 1 with 90 deg defl. scale - 1Nos., 125/5A 15VA class 1 resin cast CT -3Nos, 6A 3 pole voltmeter selector switch - 1 No., 6A 3 pole Ammeter selector switch - 1 No.
Busbar - 125A ,35 kA TPN busbar chamber with Aluminium busbar
Outgoings - 63 A, TP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 4 Nos
2
-
-
Enclosure with MCCB - Supplying , Installation , testing anSupply, Installation, Testing & Commissioning of following capacities of MCCB inside sheet enclosure with all necessary accessories.
-
-
-
250 A TPN MCCB
1
-
-
630 A TPN MCCB
3
-
-
Supply and fixing START/STOP/ Lockable Emergency push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.
15
-
-
PART -E
CABLES AND CABLING
HT CABLING
Supply of following sizes of XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.
3C X 300 sq.mm.
1316
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., Above 120 sq. mm and upto 400 sq. mm
1228
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of 300sq mm in the existing RCC/ HUME/ METAL pipe as required.
60
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of 300sq mm in the existing masonry open duct as required.
28
-
-
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 3C X 300sq.mm.
2
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
3C X300sq.mm.
4
-
-
LT CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3.5C 400 Sq. mm Al
5725
-
-
3.5C 300 Sq.mm Al
10
-
-
3.5C 240 Sq.mm Al
522
-
-
3.5C 185 Sq.mm Al
274
-
-
3.5C 120 Sq.mm Al
108
-
-
3.5C 95 Sq.mm Al
100
-
-
3.5C 70 Sq.mm Al
82
-
-
3.5C 35 Sq.mm Al
5629
-
-
4C 25 Sq.mm Al
100
-
-
4C 16 Sq.mm Al
4693
-
-
4C 10 Sq.mm Al
2856
-
-
4C 6 Sq.mm Al
4663
-
-
3C 10 Sq.mm Al
54
-
-
3C 6 Sq.mm Al
91
-
-
3C 4 Sq.mm Al
200
-
-
12C 2.5 sqmm Cu
120
-
-
5C 2.5 sqmm Cu
120
-
-
4C 2.5 sqmm Cu
3799
-
-
2C 6 Sqmm Al
1231.2
-
-
4C 300 Sq. mm Cu
108
-
-
Supplying and making end termination with brass compression gland and aluminium/Copper lugs for following size of XLPE insulated PVC sheathed aluminium/copper conductor cable of 1.1 kV grade as required.
-
-
-
3.5C 400 Sq. mm Al
103
-
-
3.5C 300 Sq.mm Al
2
-
-
3.5C 240 Sq.mm Al
16
-
-
3.5C 185 Sq.mm Al
24
-
-
3.5C 120 Sq.mm Al
12
-
-
3.5C 95 Sq.mm Al
4
-
-
3.5C 70 Sq.mm Al
4
-
-
3.5C 35 Sq.mm Al
86
-
-
4C 25 Sq.mm Al
4
-
-
4C 16 Sq.mm Al
116
-
-
4C 10 Sq.mm Al
42
-
-
4C 6 Sq.mm Al
282
-
-
3C 10 Sq.mm Al
6
-
-
3C 6 Sq.mm Al
6
-
-
3C 4 Sq.mm Al
8
-
-
12C 2.5 sqmm Cu
2
-
-
5C 2.5 sqmm Cu
2
-
-
4C 2.5 sqmm Cu
42
-
-
2C 6 Sqmm Al
48
-
-
3.5C 300 Sqmm Cu
14
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Cable size upto 35sq mm
596
-
-
Above 35 sq.mm upto 95 sq.mm
6
-
-
Above 95 sq.mm upto 185 sq.mm
64
-
-
Above 185 sq.mm upto 400 sq.mm
200
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Cable size upto 35sq mm
11451
-
-
Above 35 sq.mm upto 95 sq.mm
10
-
-
Above 95 sq.mm upto 185 sq.mm
10
-
-
Above 185 sq.mm upto 400 sq.mm
720
-
-
Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Cable size upto 35sq mm
10
-
-
Above 35 sq.mm upto 95 sq.mm
10
-
-
Above 95 sq.mm upto 185 sq.mm
10
-
-
Above 185 sq.mm upto 400 sq.mm
2592
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Cable size upto 35sq mm
10965
-
-
Above 35 sq.mm upto 95 sq.mm
76
-
-
Above 95 sq.mm upto 185 sq.mm
693
-
-
Above 185 sq.mm upto 400 sq.mm
2199
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Cable size upto 35sq mm
246
-
-
Above 35 sq.mm upto 95 sq.mm
10
-
-
Above 95 sq.mm upto 185 sq.mm
10
-
-
Above 185 sq.mm upto 400 sq.mm
644
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted / welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
175
-
-
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required
-
-
-
50 mm
75
-
-
100 mm
75
-
-
150 mm
75
-
-
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
75
-
-
150 mm dia
75
-
-
Fabrication, supply and installation of following size of perforated GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required.
-
-
-
600 MM WIDTH X 50 MM DEPTH X 2 MM THICK
646
-
-
450 MM WIDTH X 50 MM DEPTH X 2 MM THICK
722
-
-
300 MM WIDTH X 50 MM DEPTH X 2 MM THICK
1298
-
-
225 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK
3048
-
-
100 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK
1560
-
-
Fabrication, supply and installation of following size of Ladder type GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
-
-
-
600 MM WIDTH X 50 MM DEPTH X 2 MM THICK
347
-
-
450 MM WIDTH X 50 MM DEPTH X 2 MM THICK
71
-
-
Supply and fixing of chequered plate of 6 mm thick including cutting to required size using gas cutter and lay the same over the trench, fixing of nosing angle and supports for chequered plate, related civil works, finishing etc. and painting with two coats of enamel paint over one coat of Zinchromate primer as required.
2766.4
-
-
PART - F
EARTHING AND SAFETY EQUIPMENTS
Supply, Installation, Testing & Commissioning of all the materials required for maintenance free earthing system including 3 mtrs length,20mm dia 250 microns molecularly copper bonded steel rod with stainless steel connectors and fasteners for connecting earth strip, earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound),FRP (UFE FRP) earth electrode inspection chamber with heavy duty cover of 300mmx 300mmx 300mm dimension havinng bearing capacity of 15KN etc as required.The rate shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.
35
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
Supplying and laying following GI or copper strip (tinned at the points of contacts) / wire on the surface/recess with mounting saddles for conductor earth electrode including welding etc as required.
-
-
-
75mm X10mm GI
737.2
-
-
40mm X10mm GI
100
-
-
25mm x 5 mm GI
15308
-
-
25mm x 6 mm Cu
100
-
-
3.15mm Cu (10 SWG)
2192
-
-
Supplying and laying following GI or copper strip(tinned at the points of contacts) / wire at 0.6m below ground level including excavation and refilling for conductor earth electrode including welding etc as required.
-
-
-
75mm X10mm GI
355
-
-
40mm X10mm GI
100
-
-
25mm x 5 mm GI
100
-
-
25mm x 6 mm Cu
110
-
-
3.15mm Cu (10 SWG)
340
-
-
Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .
45
-
-
Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2.5 mm for 11kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 11kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .
5
-
-
Supply and fixing anodised aluminum glass framed shock treatment chart.
4
-
-
Supply and fixing of First aid box
4
-
-
Supplying and Fixing of the 433V danger/ Caution / Electrical Room notice boards of size 200x150x 2mm as per the I.E. specifications.
7
-
-
PART- G
LIGHTNING PROTECTION
-
-
-
Supply and Fixing of 8 mm Aluminum Round Conductor suitable for installation on parapet as horizontal air terminal with the required mounting clamps , cross connectors, T connectors , expansion piece and other accessories required as per IEC 62305- Part 3 .
799
-
-
Supply and Fixing of 2 meter high air terminal with 16mm rod tapered to 10 mm aluminium rod with all the accessories for fixing Air terminals as per IEC -62305 -Part 3
2
-
-
Supply and Fixing of 8 mm Aluminum Round Conductor as horizontal air terminal suitable for installation on flar roof with the required mounting clamps , cross connectors, T connectors , expansion piece and other accessories required as per IEC 62305-3
561
-
-
Supply and Fixing of 8 mm Aluminum Round Conductor as vertical down conductor with the required mounting clamps , cross connectors, T connectors ,expansion piece and other accessories required as per IEC 62305-3
1528
-
-
Providing and Fixing of Test Joint , suitable to fix 8 mm Aluminium conductor to 30 X 3 GI strip as per IEC 62305-3
30
-
-
Providing and laying Hot Dip Galvanised Steel Flat 30X3 mm thick with Zinc coating70 micron coating from test joint to earth electrode in ground/surface and for ring equipotential bonding etc.as required.
639
-
-
Supply, Installation, Testing & Commissioning of all the materials required for maintenance free earthing system including 3 mtrs length,20mm dia 250 microns molecularly copper bonded steel rod with stainless steel connectors and fasteners for connecting earth strip, earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound),FRP (UFE FRP) earth electrode inspection chamber with heavy duty cover of 300mmx 300mmx 300mm dimension havinng bearing capacity of 15KN etc as required.The rate shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.
30
-
-
PART- H
STREET LIGHTING SYSTEM
Outdoor Lighting Panel (ODP)
Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel (ODP) cubicle type, totally enclosed, IP 65, ,IK-10free standing, floor mounting, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches fabricated using 2 mm CRCA sheet powder coated, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears accessories for the LT Panel.(Ref Drawing No.DP 667 DRG EL 02 002 Sheet 2 of 10 and technical specification for more details ).
INCOMER
Surge Arrestor Type 1+2 Combination- 1 Set
63 A, FP, 36kA, MCCB with adjustable thermal magnetic release with OL & SC protection - 1 No BUSBARS
63 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy - 1 Set
INSTRUMENTS
4A, C curve SP MCB - 3 Nos.
RYB indication lamp, LED type - 1 Set
Voltage Surge Protector-1 Nos
24 hrs Digital time switch with inbuilt battery - 3 Nos.
25A, AC-1 contactor - 3 Nos
OUTGOINGS
25 A, FP RCCB (100mA)-3Nos
25 A C Curve FP MCB-3 Nos
5
-
-
STREET LIGHT FIXTURES & POLES
Supply, installation, testing and commissioning of decorative street light pole of 7 meter height with 1.2 meter overhang single arm bracket suitable for mounting 1no's 70W LED street Light fixtures. The pole shall be made out of hot dip galvanised 3 mm thick MS sheet, primered and polyurethane painted suitable for mounting 70 W LED uminaire . The LED Street Lighting luminaire shall be of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 70 (+/-10)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 13000 and system efficiency greater than or equal to 100%.The Light fitting shall be with all required accessories suitable for mounting in on the pole arm. Weight of luminaire shall not be more than 15Kg per fitting.The luminaire should meet all the technical specifications as mentioned. The hot dipped galvanised pole with bracket,built-in cylindrical GI control box of same material with service door coated with epoxy zinc phosphate primer and finished with polyurethane based paint . The control gear box is prewired with DP MCB, FP connector for easy loop-in loop-out suitable for 3phase 4 wire AC supply (4 Sqmm).The pole shall have provision for connecting the earth wire.(Make LT ADORNIS MIN 70 or equivalent approved make).
134
-
-
EARTHING Supply, Installation, Testing & Commissioning of all the materials required for maintenance free earthing system including 3 mtrs length,20mm dia 250 microns molecularly copper bonded steel rod with stainless steel connectors and fasteners for connecting earth strip, earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound),FRP (UFE FRP) earth electrode inspection chamber with heavy duty cover of 300mmx 300mmx 300mm dimension havinng bearing capacity of 15KN etc as required.The rate shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.
8
-
-
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required for Lighting Poles.
4mm GI (8 SWG)
100
-
-
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
25mm X 6mm GI
40
-
-
4mm GI (8 SWG)
3151
-
-
WIRING AND ACCESSORIES
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit, with modular switch on existing modular box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
2736
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit, 2 way modular switch, on existing modular box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. (Note:The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item 65.01)
65
-
-
Group controlled light point with 1.5 sq. mm wire - Wiring for Group controlled light point (from one point to another point) with 3X 1.5 sq. mm PVC insulated, (FRLS), copper conductor cable in existing surface/recessed mounted rigid medium class 20mm PVC conduit with all accessories as required.. The total distance from one point to another point will not exceed 5meters. In case if the total length increases 5meters. The distance from DB to 1st point will be measured under item point wiring.
584
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
10952.5
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
32851
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
6348
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1850
-
-
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
1420
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
430
-
-
4 X4 sq. mm + 2 X 4 sq. mm earth wire
400
-
-
Supplying and fixing stepped type electronic fan regulator on existing modular box with necessary interconnection etc. as required complete.
454
-
-
Supplying and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, on exising modular box with necessary connections etc.as required.
384
-
-
Supplying and fixing of 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, on existing modular box with necessary connection etc. as required. (For light plugs to be used in non residential buildings).
735
-
-
Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch on existing modular box, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)
184
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amps switch
95
-
-
3 pin 5/6 amp socket outlet
95
-
-
6 pin 15/16 amp socket outlet
27
-
-
15/16 amp switch
30
-
-
Telephone socket outlet
83
-
-
Bell push
20
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches and sockets in recess etc as required.
-
-
-
1 or 2 Module GI box (75mm X 75mm)
350
-
-
4 Module (125mm X 75mm)
100
-
-
6 Module (200mm X 75mm)
450
-
-
8 Module (125mm X 125mm)
450
-
-
12 Module (200mm X 150mm)
50
-
-
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module GI box (75mm X 75mm)
130
-
-
4 Module (125mm X 75mm)
203
-
-
6 Module (200mm X 75mm)
50
-
-
8 Module (125mm X 125mm)
50
-
-
12 Module (200mm X 150mm)
50
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
20
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
27464
-
-
25 mm
40119
-
-
32 mm
1780
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
20
-
-
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
20
-
-
PART - B- MCBs AND MCB DISTRIBUTION BOARDS
Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 125/160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
4 Way TP
2
-
-
8 Way TP
9
-
-
Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
125Amp,16KA,FPMCCB
8
-
-
160Amp,16KA,FPMCCB
1
-
-
250Amp,16KA,FPMCCB
1
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required.
-
-
-
8 way (8 + 24), Double door
3
-
-
4 way (8 + 12), Double door
3
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
-
-
-
8 way (8 + 24), Double door
30
-
-
6 way (8 + 18), Double door
10
-
-
4 way (8 + 12), Double door
17
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way, Double door
13
-
-
8 way, Double door
6
-
-
12 way, Double door
10
-
-
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required
-
-
-
4 pole 63 amps. (415 Volts)100mA sensitivity.
5
-
-
4 pole 40 amps. (415 Volts),100mA sensitivity.
5
-
-
4 pole 40 amps. (415 Volts),30mA sensitivity.
15
-
-
2 pole 40 amps. (240 Volts),30mA sensitivity.
5
-
-
4 pole 25 amps. (415 Volts),30mA sensitivity.
37
-
-
2 pole 25 amps. (230 Volts),30mA sensitivity.
25
-
-
Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required.
-
-
-
6A to 32A, SP, B/C-CURVE
726
-
-
6 A to 32 A TP MCB, C-CURVE
116
-
-
6 A to 32 A SP MCB, D-CURVE
141
-
-
40A to 63A TP MCB, C-CURVE
47
-
-
6 A to 32 A TP MCB, D-CURVE
15
-
-
40A to 63A TP MCB, D-CURVE
15
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
50
-
-
Supply, Installation, Testing & Commissioning of following isolator in metal enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.
-
-
-
32A DP
10
-
-
32A FP
22
-
-
40A FP
10
-
-
63A FP
26
-
-
PART - C- LIGHT FIXTURES AND FANS
Supply of indoor surface mounted LED Batten with High CRCA housing and Polycarbonate Diffuser ,along with driver,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1800, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Philips BN108C LED20S or Crompton Greaves IGP131LT8-16+LTT8-20 or equivalent approved make
642
-
-
Supply of indoor surface mounted LED tube with Batten made of CRCA cody, along with driver, surge protector,system wattage of 40+/-4 Watts(2x20 watts),lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro WIO922208 + 2 Nos. of 18W LED Tube Light or Crompton Greaves IGP132LT8-16+2 nos LT8-16 or equivalent approved make
498
-
-
Supply of industrial surface mounted LED tube with Diffuser and Batten along with driver , surge protector,,system wattage of 40+/-4 Watts),lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro xline LE10-491-XXX-57HCSL or equivalent approved make
10
-
-
Supply of indoor surface mounted LED tube with Diffuser and Batten along with driver , surge protector,,system wattage of 40+/-4 Watts,lumen output of lamp greater than or equal to 3400 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 80lumen/watt and including all necessary accessories as required complete.Make:- Cat No: LT CO4357S0000 or equivalent approved make
192
-
-
Supply of indoor surface mounted LED tube with Diffuser and Batten along with driver , surge protector,,system wattage of 40+/-4 Watts,lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy not less than 100 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Crompton Greaves LDL-36-CDL or philips BN108LED40S or equivalent approved make
10
-
-
Supply of indoor decorative surface mounted LED Batten with Poly carbonate housing and Polycarbonate Diffuser,along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 800, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Wipro LL20-111-XXX-65-NE or Crompton Greaves LCTL - 9 -CDL or equivalent approved makes
143
-
-
Supply of LED recess mounted down light made of aluminium body, along with driver,system wattage of 20+/-2 Watts,lumen output of lamp greater than 1700 lumens, power factor 0.9, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro LD90-231-XXX-65-XX or Crompton Greaves LCDE-18-CDL or equivalent approved makes
632
-
-
Supply of LED recess mounted down light made of aluminium body, along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 900 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Wipro LD90-111-XXX-65-XX or crompton greaves LCDE-09-CDL or equivalent approved make)
43
-
-
Supply of 2x2 LED recess mounted fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 33+/-3 Watts,lumen output of lamp greater than 3000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Wipro CRCO23RO36HP65G1 or Crompton Greaves LCTLRN-36-FO-CDL
203
-
-
Supply of 2x2 LED clean room fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 40+/-3 Watts,lumen output of lamp greater than 3500lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Diffuser shall be sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing. Fixture should be IP20 grade integral luminaire. Make Wipro LC20-551-XXX-57-XX LED Bottom Opening Clean Room Luminaire with Diffuser or Crompton Greaves LCBOR - 40-CDL or equivalent approved make
308
-
-
Supply of 2x2 LED clean room fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage 60+/-3 Watts,lumen output of lamp greater than 5000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,with suitable driver and including all necessary accessories as required complete.Diffuser shall be sealed with bottom frame and non-hygroscopic VHB gasket to ensure dust proofing. Fixture should be IP20 grade integral luminaire. Make Wipro LC20-721-XXX-57-XX LED Bottom Opening Clean Room Luminaire with Diffuser or Crompton Greaves LCBOR - 60-CDL or equivalent approved make
10
-
-
Supply of LED Street Lighting luminaire of IP66 protected, pressure die cast aluminium housing body with built-in surge protection system, optimal heat sink, with system wattage less than 35 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 3000 and system efficacy greater than or equal to 95%.Make: wipro skyline LR02-331-XXX-57-XX or crompton LSTS-30-CDL or equivalent approved make
20
-
-
Supply of following sizes of 900 mm sweep ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-High breeze or equivalent approved make).
8
-
-
Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-ENTRUST50 or equivalent approved make).
446
-
-
Supply of 400 mm size wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.(Make: CG WMSDX 120 or equivalent approved make).
133
-
-
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make)
87
-
-
ITC LIGHT FITTINGS AND FANS
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1495
-
-
Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required.
675
-
-
Installation, testing and commissioning of LED fittings with chain and copper wiring - Installation testing and commissioning of prewired fluorescent fittings of all types including LED complete with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.
521
-
-
Installation, testing and commissioning of High bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
20
-
-
Installation, testing and commissioning of ceiling fan, including fixing the regulator, wiring using down rod of 100cm length using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc. as required.
446
-
-
Installation, testing and commissioning of Wall fan, including all the supports as required and wiring using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc complete.
133
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
87
-
-
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
3377
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements