KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,00,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_KITCO_408996_1Bid Award Id
ViewTender No
AD/KITCO/CL/02/2021Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
5950.28
-
-
... More
2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth
18
-
-
... More
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
12
-
-
... More
2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth
4
-
-
... More
2.33.4 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth
1
-
-
... More
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2210.31
-
-
... More
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
7380.49
-
-
... More
2.7.3 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (blasting prohibited)
10
-
-
... More
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
637.67
-
-
... More
2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
2262.75
-
-
... More
2.9.3 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited)
15
-
-
... More
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
205.83
-
-
... More
2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock
895.86
-
-
... More
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
10
-
-
... More
2.28.1 : Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
1820
-
-
... More
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
19449.73
-
-
... More
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
306.35
-
-
... More
od176870/2019_2020 : Filling with available earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
21.75
-
-
... More
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
846.15
-
-
... More
od63609/2020_2021 : Carriage of materials by mechanical transport including loading, unloading and stacking beyond 50 m initial lead up to 5 km, including all lifts involved as directed by the Engineer-in-Charge. Excavated Earth/rock
879.86
-
-
... More
Concrete Works
-
-
-
... More
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6.19
-
-
... More
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
1105.12
-
-
... More
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
618.7
-
-
... More
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .(Note:Quantity of cement used in respective item shall be measured for payment.Dosage of water proofing compound shall be 1kg per bag of cement or as per manufactures reccommendation)
204959.53
-
-
... More
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
618.7
-
-
... More
4.2.5 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size)
114.05
-
-
... More
4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
46.92
-
-
... More
RCC Works
-
-
-
... More
5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
56.8
-
-
... More
od64151/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work upto plinth level
159.52
-
-
... More
od64155/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. All work above plinth level upto floor V level
148.86
-
-
... More
od77219/2020_2021 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 340 kg/cum. All work upto plinth level.
177.15
-
-
... More
od77221/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. All work above plinth level upto floor V level
66.4
-
-
... More
od72171/2019_2020 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-35 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 350 kg/cum. All work upto plinth level.
1663.46
-
-
... More
od72175/2019_2020 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-35 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 350 kg/cum. All work above plinth level upto floor V level.
4963.94
-
-
... More
od60090/2019_2020 : Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses,slabs, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.
3.97
-
-
... More
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
29.55
-
-
... More
5.16 : Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 ( 1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
0.8
-
-
... More
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
217209.6
-
-
... More
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
646098.37
-
-
... More
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
2342.54
-
-
... More
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
2686.56
-
-
... More
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
17628.13
-
-
... More
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
19906.88
-
-
... More
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
6823.3
-
-
... More
od64867/2019_2020 : Extra for shuttering in circular work- Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts
8.67
-
-
... More
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
647.23
-
-
... More
5.9.13 : Centering and shuttering including strutting, etc. and removal of form for:Vertical and horizontal fins individually for forming box louvers band, facias and eaves boards
414.77
-
-
... More
5.9.15 : Centering and shuttering including strutting, etc. and removal of form for:Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
0.33
-
-
... More
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
3820.66
-
-
... More
5.9.17 : Centering and shuttering including strutting, etc. and removal of form for:Cornices and mouldings.
393.12
-
-
... More
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
1146.07
-
-
... More
5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
19318.41
-
-
... More
5.28 : Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints.
149.46
-
-
... More
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
2386.7
-
-
... More
Masonry Works
-
-
-
... More
od176910/2019_2020 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for drain,foundation and basement including all cost of materials, labour charges etc. (Laterate shall be cut from the site premises and the same shall be neatly dressed to meet the exact size required including all lead and lift etc as directed by the Engineer in Charge )
184.86
-
-
... More
od176411/2019_2020 : Laterate masonry with neatly dressed laterate stone of size 30x20x20 cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. (Laterate shall be cut from the site premises and the same shall be neatly dressed to meet the exact size required including all lead and lift etc as directed by the Engineer in Charge ) .
481.07
-
-
... More
od176183/2019_2020 : Laterate masonry with neatly dressed laterate stone of size 30x20x20 cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. (Laterate shall be cut from the site premises and the same shall be neatly dressed to meet the exact size required including all lead and lift etc as directed by the Engineer in Charge ) .
1641.44
-
-
... More
od176415/2019_2020 : Laterate masonry with neatly dressed laterate stone of size 30x20x20 cm or nearest size in cement mortar 1:6 for superstructure above floor two level upto floor five level including all cost of materials, labour charges etc. (Laterate shall be cut from the site premises and the same shall be neatly dressed to meet the exact size required including all lead and lift etc as directed by the Engineer in Charge ) .
689.41
-
-
... More
od184455/2019_2020 : Providing and constructing Exposed laterate stone masonry of uniform texture and size 30x20x20cm or nearest size in CM 1:6 (1 cement, 6 coarse sand) with neatly dressed laterate stones of standard/approved size with evenly spaced grooves and approved quality including scaffolding, raking out of joints,curing, cost and conveyance of all materials, labour, lead, lift, etc.complete for all types of masonry works in super structure above the highest plinth level upto floor five level as per drawing and as directed by Engineer-in-Charge.The exposed surface of the laterite to be polished and finished in approved PU based clear coating as per manufacturer specification. (Note:Laterate shall be cut from the site premises including all lead , lift and the same shall be neatly dressed to meet the exact size required and sample done by skilled labour to be approved by the engineer in charge and workmanship to be consistently followed in the entire work )
1093.56
-
-
... More
50.6.3.1 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
0.8
-
-
... More
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
390.52
-
-
... More
od72172/2019_2020 : Solid block masonry using pre cast sold blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part 1 of 1979 for Super structure above floor two level upto floor five level for 10 cm thick wall in: Cm 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete.
284.39
-
-
... More
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
6727.57
-
-
... More
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
45.44
-
-
... More
Joinery and Ornamental Works
-
-
-
... More
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
6444.84
-
-
... More
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
1554.87
-
-
... More
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
37.68
-
-
... More
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
94.92
-
-
... More
21.3.3 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness
157.5
-
-
... More
od63659/2020_2021 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With pin headed glass panes of 4.0 mm thickness
63.41
-
-
... More
od66976/2020_2021 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inlay excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 12 mm thick toughened glass
19.2
-
-
... More
od67404/2020_2021 : Providing and Fixing 12 mm Anjili wood planks, planed lap jointed and screwed to existing steel frame work to correct line and level all complete including all cost of materials labour charges etc complete
6.98
-
-
... More
od74678/2020_2021 : Providing and fixing wood work in frames and panels for ornamental works like handrail,cornices other architectural features with necessary fixtures like wooden nails/screws of required diameter & length as per drawing and as directed by Engineer in Charge. Second class teak wood.
150.03
-
-
... More
od74679/2020_2021 : Providing and fixing wood work in frames and panels for ornamental works like mughappu and other architectural features with necessary fixtures like wooden nails/screws of required diameter & length as per drawing and as directed by Engineer in Charge. Second class teak wood
46.25
-
-
... More
9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4342
-
-
... More
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
30.49
-
-
... More
9.5.1.1 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters
28.8
-
-
... More
9.5.1.2 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters
808.79
-
-
... More
9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood
21.6
-
-
... More
9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane
832.07
-
-
... More
9.14 : Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. ( Shutter area to be measured)
837.59
-
-
... More
9.20.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
4.2
-
-
... More
9.21.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
823.4
-
-
... More
9.24.1 : Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded ) (overall area of door shutter to be measured):Rectangular or square
54
-
-
... More
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
517
-
-
... More
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
145.32
-
-
... More
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
5.04
-
-
... More
9.126.1 : Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710
216.33
-
-
... More
9.127.2 : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.0 mm thick
432.66
-
-
... More
9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded
532.4
-
-
... More
9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately
123.48
-
-
... More
9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).
52.92
-
-
... More
9.139 : Providing and fixing panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.
22
-
-
... More
od65961/2020_2021 : Supplying And Fixing a pair of fire rated Solid SS Lever Handle and Mortise Lock case with Cylinder of approved size and quality for fire rated steel doors etc complete all works including all required fixtures as directed by Engineer in Charge.
80
-
-
... More
21.4.2 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With brass cover plate minimum 1.25 mm thickness
2
-
-
... More
od65998/2020_2021 : Providing and fixing hardwares for Handicaped door(Excluding door frame and panel).The shutter to be provided with cylindrical knob lock with rose diameter 75 mm and SS matt finished kick plate of dimension 300 mm X 1050 mm X 1mm including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing etc. complete as directed by the Engineer-in-Charge at all levels:
3
-
-
... More
od68147/2020_2021 : Providing and fixing of Wooden lead lined window with window frame shall be Single rebate profile of size 120 x 70 mm (approx.) made out of Hardwood (Red Mirandi) with 2 mm Lead Sheet sand witched in window frame. Frame shall be finished with primer finish .Window shall be fixed with 10 mm thick Lead Glass . Lead lined wooden fixed window with size – 1.0 X 1.0 m . The inside face of the frame face trim to rebate height shall be protected with minimum 2 mm thick lead line. Frames shall be provided with HRD Fasteners of Fischer Make or equivalent for installation on a finished plastered masonry/RCC wall opening. Installed frame shall be grouted with cement & sand slurry necessary for window on the clear masonry opening. The rate shall includes the cost and conveyance of all materials , labour charges, lead,lift ,Lead glass of 10 mm thick and anchor fastener etc. complete as directed by the Engineer-in- Charge at all levels.
2
-
-
... More
od68148/2020_2021 : Providing and fixing of Galvanized hollow lead lined metal door conforming to IS 277 (2003) . Door frame shall be double rebate profile of size 143 x 57mm (approx.) made out of approx. 2.0mm (14gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height shall be protected with minimum 2 mm thick lead line. All provision shall be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers shall be provided on the strike jamb. Frames shall be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry/RCC wall opening.Installed frame shall be grouted with cement & sand slurry necessary for doors on the clear masonry opening.Door leaf shall be approx. 48mm thick fully flush double skin door and Door leaf shall be manufactured from approx 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door shall be rigid with lead line of minimum 2 mm thick all across the inside of the exposed surface. In addition the door shall have a basic infill steel stiffened special core with necessary reinforcement both on top and bottom. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges shall be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. All doors and frames shall be finished to powder coated for minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Lead lined Steel Door Single leaf of size 1.00 X 2.10 m , the rate shall includes the cost and conveyance of all materials , labour charges,lead,lift, hardware like SS ball bearing hinges 100x75x3.0- 04 Nos.in each panel ,mortise dead lock with cylinder and both side key operation - 1 no , SS D type pull handle 300 X 25 mm - 1 set in each panel , heavy duty door closer- 1 no in each panel,Tower bolt 450 mm-1 no in each panel and anchor fastener etc. complete as directed by the Engineer-in-Charge at all levels.
3
-
-
... More
od68149/2020_2021 : Providing and fixing of Galvanized hollow lead lined metal door conforming to IS 277 (2003) . Door frame shall be double rebate profile of size 143 x 57mm (approx.) made out of approx. 2.0mm (14gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height shall be protected with minimum 2 mm thick lead line. All provision shall be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers shall be provided on the strike jamb. Frames shall be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry/RCC wall opening.Installed frame shall be grouted with cement & sand slurry necessary for doors on the clear masonry opening.Door leaf shall be approx. 48mm thick fully flush double skin door and Door leaf shall be manufactured from approx 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door shall be rigid with lead line of minimum 2 mm thick all across the inside of the exposed surface. In addition the door shall have a basic infill steel stiffened special core with necessary reinforcement both on top and bottom. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges shall be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. All doors and frames shall be finished to powder coated for minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Lead lined Steel Door Double leaf of size 1.20 X 2.40 m , the rate shall includes the cost and conveyance of all materials , labour charges,lead,lift, hardware like SS ball bearing hinges 100x75x3.0- 04 Nos.in each panel ,mortise dead lock with cylinder and both side key operation - 1 no , SS D type pull handle 300 X 25 mm - 1 set in each panel , heavy duty door closer- 1 no in each panel,Tower bolt 450 mm-1 no in each panel and anchor fastener etc. complete as directed by the Engineer-in-Charge at all levels.
3
-
-
... More
od73636/2019_2020 : Providing and fixing of Galvanized hollow lead lined metal door conforming to IS 277 (2003) . Door frame shall be double rebate profile of size 143 x 57mm (approx.) made out of approx. 2.0mm (14gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height shall be protected with minimum 2 mm thick lead line. All provision shall be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers shall be provided on the strike jamb. Frames shall be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry/RCC wall opening.Installed frame shall be grouted with cement & sand slurry necessary for doors on the clear masonry opening.Door leaf shall be approx. 48mm thick fully flush double skin door and Door leaf shall be manufactured from approx 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door shall be rigid with lead line of minimum 2 mm thick all across the inside of the exposed surface. In addition the door shall have a basic infill steel stiffened special core with necessary reinforcement both on top and bottom. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges shall be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. All doors and frames shall be finished to powder coated for minimum 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Lead lined Steel Door Double leaf of size 1.50 X 2.40 m , the rate shall includes the cost and conveyance of all materials , labour charges,lead,lift, hardware like SS ball bearing hinges 100x75x3.0- 04 Nos.in each panel ,mortise dead lock with cylinder and both side key operation - 1 no , SS D type pull handle 300 X 25 mm - 1 set in each panel , heavy duty door closer- 1 no in each panel,Tower bolt 450 mm-1 no in each panel and anchor fastener etc. complete as directed by the Engineer-in-Charge at all levels.
3
-
-
... More
od73909/2019_2020 : Supply & Fixing shower cubicle (Dorma make or equivalent) with glass door and glass partition using 8mm thick toughened glass,including shower fittings, glass to wall and glass to glass hinges(G/W hinge 90° (Double Sided Back Plate)G/W bracket 90° (Double Sided Back Plate),G/G brackets 90°),Water disperser 8-10mm wide,Wall Seal 8-10mm glass,Magnetic seal 180° 8-10mm glass etc for 2000mm length Towel rod cum handrail (SS 304 grade) 458mm x 200mm x 19mm,Inline support bar with 1 glass clamp & 2 wall clamps, L=2100mm for 8mm glass,Glass clamp for 8mm glass application,"L" connector for support bars including cost and conveyance of all materials,labour charges, etc complete as directed by the Engineer-in-Charge at all levels. L shaped / I Shaped shower cubicle of total length 2.0 +/- 0.3 m as per drawing and height shall be 2.0 m .
42
-
-
... More
21.15.2 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
36
-
-
... More
50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop
4
-
-
... More
50.9.15.2 : Supplying and fixing 300 mm Aluminium aldrop
2
-
-
... More
50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm
1758
-
-
... More
9.72.1 : Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)
1780
-
-
... More
9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
377
-
-
... More
9.77 : Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete
92
-
-
... More
9.81.1 : Providing and fixing bright finished brass handles with screws etc. complete:125 mm
266
-
-
... More
9.82 : Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
481
-
-
... More
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
554
-
-
... More
9.86.3 : Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete:200 mm weighing not less than 240 gms
879
-
-
... More
9.88 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
35
-
-
... More
9.97.1 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm
2
-
-
... More
9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm
964
-
-
... More
9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm
365.6
-
-
... More
9.100.1 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
4
-
-
... More
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
77
-
-
... More
9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.
8
-
-
... More
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm
2
-
-
... More
Steel works
-
-
-
... More
od60110/2019_2020 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
29856.32
-
-
... More
od64173/2020_2021 : Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, bending, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
129278.66
-
-
... More
od72162/2019_2020 : Structural steel work riveted, bolted or welded in built up sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges, lead,lift etc complete as directed by Engineer in Charge at all levels.
100197.92
-
-
... More
od67474/2020_2021 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels. In stringers, treads, landings etc of staircases including use of chequered plate wherever required, all complete
5094.24
-
-
... More
od67487/2020_2021 : Supplying and fixing rolling shutters of approved make,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25mm thick top cover
26.4
-
-
... More
10.7 : Providing and fixing ball bearing for rolling shutters.
10
-
-
... More
10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area
6
-
-
... More
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
6
-
-
... More
10.17 : Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
6
-
-
... More
10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
176.41
-
-
... More
10.20 : Providing and fixing bolts including nuts and washers complete.
2217.6
-
-
... More
od60132/2019_2020 : Supplying and fixing C.I. cover with frame for manholes :600x600 mm square C.I. cover (Heavy duty) the weight of the cover to be not less than 210 kg. Complete all works including cost and conveyance of all materials, all labour charges,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge
8
-
-
... More
10.27.1 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 60 mm
24
-
-
... More
10.27.2 : Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide P A 6 grade sleeve, including drilling of hole in frame, concrete/masonry, etc. as per direction of Engineer-in-charge.10 x 80 mm
48
-
-
... More
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
17100
-
-
... More
Flooring Works
-
-
-
... More
od185667/2019_2020 : Providing and laying matt finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. (The base price considered for the matt finished Vitrified tiles is 437.86/sqm excluding GST )
531.12
-
-
... More
od64167/2020_2021 : Providing and laying matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm . (The base price considered for the matt finished Vitrified tiles is 437.86/sqm excluding GST )
88.47
-
-
... More
od185668/2019_2020 : Providing and laying matt finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x 800 mm . (The base price considered for the matt finished Vitrified tiles is 501.72/sqm excluding GST )
792.28
-
-
... More
od185669/2019_2020 : Providing and laying matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800 x 800 mm . (The base price considered for the matt finished Vitrified tiles is 501.72/sqm excluding GST )
89.07
-
-
... More
od185111/2019_2020 : Providing and laying rustic matt finished full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. (The base price considered for the rustic matt finished full body vitrified tiles is 538.20/sqm excluding GST )
6664.59
-
-
... More
od185110/2019_2020 : Providing and laying rustic matt finished full body vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm . (The base price considered for the rustic matt finished full body vitrified tiles is 538.20/sqm excluding GST )
1277.52
-
-
... More
od185113/2019_2020 : Providing and laying rustic matt finished full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x 800 mm. (The base price considered for the rustic matt finished full body vitrified tiles is 620.30/sqm excluding GST )
5408.17
-
-
... More
od185112/2019_2020 : Providing and laying rustic matt finished full body vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800 x 800 mm. (The base price considered for the rustic matt finished full body vitrified tiles is 620.30/sqm excluding GST )
628.69
-
-
... More
od74914/2020_2021 : Providing and laying matt finished vitrified tile of size 2000x1200 mm approx. (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade in riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.(The base price considered for the matt finished vitrified tile is 1094.64/sqm excluding GST )
176.4
-
-
... More
od75543/2020_2021 : Providing 3 mm spacer in flooring/skirting & filling /grouting and finishing the joints using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) instead of using white cement and matching pigments etc complete as per direction of Engineer-in-charge. Size of Tile 800x800mm
2366.44
-
-
... More
od75564/2020_2021 : Providing 3 mm spacer in flooring/skirting & filling /grouting and finishing the joints using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) instead of using white cement and matching pigments etc complete as per direction of Engineer-in-charge. Size of Tile 600x600mm
840.58
-
-
... More
od73342/2020_2021 : Providing and laying matt finished/anti skid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), with 3 mm spacer joints , grouting the joints using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 450x450 mm. (The base price considered for the matt finished/anti skid vitrified floor tiles is 474.35/sqm excluding GST )
828.33
-
-
... More
od73355/2020_2021 : Providing and laying matt finished/anti skid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), with 3 mm spacer joints , grouting the joints using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 300x300 mm. (The base price considered for the matt finished/anti skid vitrified floor tiles is 355.76/sqm excluding GST )
25.06
-
-
... More
od67488/2020_2021 : Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
16.5
-
-
... More
od75760/2020_2021 : Providing and fixing I st quality ceramic glossy/matt wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
4953.89
-
-
... More
od185108/2019_2020 : Providing and laying matt finished exterior grade vitrified tile of size 300x300 mm and thickness 9-10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as parking,footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (The base price considered for the exterior grade vitrified tile is 401/sqm excluding GST )
1053.6
-
-
... More
8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
1432.15
-
-
... More
8.13.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.
49.98
-
-
... More
od74682/2020_2021 : Providing edge bevelling to 18 mm (approx.) thick granite work etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.
1640.6
-
-
... More
od185168/2019_2020 : Providing and applying self levelling compound of approved make upto 3mm thick including primer(acrylic based) for the high performance and correction of irregular substratas( low co2 emmission and very low volatile organic compound emission, recyclable) for attaining a levelled surface for epoxy,vinyl, wooden flooring etc with a mixing ratio of 6.5litre of clean water to 25 kg bag using HDE technology with extended flow including cost and conveyance of all materials, labour, curing, lead lift , etc. complete as directed by Engineer-in-Charge at all levels.The above work shall be carried out by an agency having sufficient experience in similar work and only skilled and experienced persons shall be employed for this purpose.
786.53
-
-
... More
od185369/2019_2020 : Providing and laying Laminated wooden flooring using 8mm thick Plank Sizes - 1214x192x8mm / 1286x192x8mm or nearest available size in approved design/ pattern with micro beveled shaped edges including installing the laminated wood using four side buckled "Click" system with tongue and groove mechanism. Sub floor on which the planks are being laid should be smooth, flat & hard & free from moisture, greases, etc . In case of uneven sub floor the same should be leveled by self leveling compound(measured and paid seperately). The moisture level present in the sub floor should be less than 8% before installation of the floor. The laminated wood must be installed on a thin layer of PU form underlay to keep the wood safe from moisture below and keep it noise proof. The planks can be fixed easy with its “Lock & Fold” installation system. The installation should be carried out as per the manufacturer installation guide and process.,including neccesary skirting ,floor profile , cost and conveyance of all materials,PU underlay, labour charges,lead, lift,curing, complete as directed by Engineer in charge at all levels .The above work shall be carried out by an agency having sufficient experience in flooring and only skilled and experienced persons shall be employed for this purpose.
180
-
-
... More
od74681/2020_2021 : Providing and applying 2mm thick high strength epoxy flooring system of approved brand over the cured layer using serrated trowel and spike roller after Preparing the surface of concrete floor by dry grinding depending upon the condition of floor surface to remove laitance, loose concrete etc,repair of existing floor if any and to provide key on the floor surface to receive the floor coating and topping and applying epoxy coating as per manufactures specification.The rate shall include cost and conveyance of all material ,labour charges, lead etc. complete as directed by Engineer - in- charge. (All works covered by this specification shall be carried by an experienced agency having sufficient experience in this type of flooring system Only skilled and experienced persons shall be employed for this purpose.)
606.53
-
-
... More
od73898/2019_2020 : Providing and fixing Glass mossaic tiles at finished plain wall/floor surface of size 20 mm x 20 mm x 4 mm or nearest available in all colour, design, fixing in customize design as per direction of Engineer-in-charge. The glass mosaic tiles to be fixed on the wall /floor surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-charge.
760.68
-
-
... More
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
933.62
-
-
... More
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
166.44
-
-
... More
11.20.2 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement
959.6
-
-
... More
11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement
86
-
-
... More
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
135
-
-
... More
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
122
-
-
... More
8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade
194.88
-
-
... More
5.44.1 : Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge . (Material shall confirm to ASTM 6063).Floor Joint of 100 mm gap.
164.6
-
-
... More
5.45.1 : Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap.
244.8
-
-
... More
5.46.1 : Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.Roof Joint of 100 mm gap.
164.6
-
-
... More
Roofing Works
-
-
-
... More
50.12.2.5 : Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.
204.46
-
-
... More
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
111.36
-
-
... More
12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
37
-
-
... More
12.51.2 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Flashings / Aprons (Upto 600 mm)
55.2
-
-
... More
12.5.1 : Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/ m2
61
-
-
... More
12.7.1 : Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2
85.4
-
-
... More
od64159/2020_2021 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on on RCC roof slab or steel frame work all complete at all levels as per directions of the Engineer- In -Charge.
893.48
-
-
... More
od64160/2020_2021 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on RCC roof slab or steel frame work all complete at all levels as per directions of the Engineer- In -Charge.
8491.08
-
-
... More
od64877/2019_2020 : Providing and fixing 0.8mm thick aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over truss roof , to arrest the water leakage be done with stainless steel dash fastners of 8 mm dia and 75 mm long bolt including providing aluminium - washers 2 mm thick 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per drawing and direction of Engineer -in-charge. Anodised aluminium sheet 0.8 mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
2417.93
-
-
... More
od72180/2019_2020 : Plastering the surface of sloping roof slabs, troweling to perfect smoothness closing all the voids with CM 1:3 (1 cement, 3 sand) 12mm thick one coat including forming reeper bands of 5cmx2.5cm over the plastered surface simultaneously to the spacing of 320mm (or nearest size of MP tiles) with CM 1:3 (1 cement and 3 sand). Mortar band shall be provided at required thickness at every 4 m interval and water cutter shall be provided in reeper bands at every 6 feet interval etc complete including cost and conveyance of all materials,labour charges, curing,scaffolding charges etc. as directed by Engineer- in- charge at all levels.
3396.11
-
-
... More
od67747/2020_2021 : Providing and fixing Gutter ( excluding gutter support) in required width (upto a maximum of 1200mm girth) with plain galvalume/zincalume colour coated sheet made out of 0.5mm TCT, minimum 300 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume/Zincalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges etc. complete at all levels as directed by Engineer-in-Charge
736.96
-
-
... More
Ceiling and Cladding works
-
-
-
... More
12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
441.6
-
-
... More
12.52.2 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm drop; made of GI sheet having glavanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
61.48
-
-
... More
12.52.3 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.
3653.03
-
-
... More
12.53 : Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
761.49
-
-
... More
26.3 : Providing & fixing in position Phenol bonded Bamboowood wall cladding at allheight with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mmwide (minimum), in approved colour, texture and finish, having PerformanceAppraisal Certificate (PAC) issued by Building Materials & Technology PromotionCouncil (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5nos in each tile to frame work made of second class teak wood of size 20x15 mmin centre of each tile and bottom and top of work height, 40x15mm placed at endsof each tile. The cladding shall be laid over backlayment of 1.00 mm thick expandedpoly ethylene foam of density 40kg/cum in two layers, first layer on wall surfacebefore fixing wooden frame and second layer on frame under cladding. Thebomboo wood planks shall have minimum density of 1000 Kg/cum & minimumHardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction ofthe Engineer in-charge.
100
-
-
... More
od67219/2020_2021 : Providing & fixing 12 mm thick BWP grade ply confirming to IS- 710 on existing steel frame work / column , wall cladding etc using approved size screws at suitable spacing at all levels as per drawing.The ply shall be fixed in correct line and level as per drawing and as directed by the Engineer in charge. The rate shall include the cost & conveyance of all materials, labour charges,levelling, lead, lift , cutting any shapes , provisions for electrical, networking fixtures wherever required, etc complete as directed by Engineer in Charge at all levels.
1704.3
-
-
... More
od185162/2019_2020 : Providing & fixing 20 mm thick or nearest available laterite cladding tiles over RCC/M.S Structural members/ masonry surfaces using suitable adequate fixing arrangements / adhesives as required up to 15 m heights including finishing with polyurethane based clear coating including filling the joints with required pigments as per manufacturers specification matching with the exposed laterite masonry, all lead, lift, labour and scaffolding charges as directed by the Engineer-in-charge. The rate shall be inclusive of all additional supports for the first row cladding tile etc.
3090.19
-
-
... More
od178065/2019_2020 : Providing and fixing Extruded Baffle Aluminium panel ceiling manufactured of approved colour consisting of panel size 50mm wide x100mm deep, 1.2mm thick ,powder coated Aluminium in wood grain finish, max panel length up to 4 mtr. Baffle Panels will be powder coated with wood finish colour with min 60microns on the exposed surface. Panel to be connected using fasteners to the primary Steel carrier of 30 mm wide x 30 mm high x 2 mm thick with module option of Holes @ 25mm C/C. Primary steel carrier shall be suspended by means of threaded rod at a distance of 1.00 mtr c/c. System Module will be 300mm c/c.as per the architect/engineer in charge specified. The end caps need to be powder coated with wood finish as same as baffles. The system shall be fixed to already erected purlin members at maximum 1000mm c/cby means M8 bolts and nuts with washers etc complete all works as per direction of site Engineer-in-charge.
160
-
-
... More
od73735/2019_2020 : Supplying and installation of ‘Acoustic Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as per the choice of the Architect of size 600x600mm, 600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel Impalers supplied by approved venders as per the instructions laid down by the manufacturer. The Impalers shall be fixed to the wall surface using self tapping screws. 3 nos. in case of 600x600mm, 4 nos in case of 600x1200mm and 5 nos in case of 600x1800mm wall panel Impalers shall be used for the installation purpose. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Acoustic wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by a Trained Installation team & Installation should be carried out as per manufacturer’s recommended procedure. Rate shall include cost and conveyance of all materiel , fixtures, labours etc at all lead and lift as directed by the Engineer in Charge
118.08
-
-
... More
26.27.3 : Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ?85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tileconfirming to ISO 5 (class 100 ) specifications
5466.96
-
-
... More
Finishing Works
-
-
-
... More
13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
48499.06
-
-
... More
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
8687.69
-
-
... More
13.22 : Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
268
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
49009.83
-
-
... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
42357.07
-
-
... More
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
481.49
-
-
... More
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
3805.33
-
-
... More
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
916.74
-
-
... More
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
100
-
-
... More
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5736.02
-
-
... More
22.24A : Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be appliedas intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5mm thickness after scrapping and properly cleaning the surface to remove looseparticles from the plaster surface, followed by top coating with Premium AcrylicSmooth exterior paint with Silicone additives of required shade by two or morecoats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge
1898.29
-
-
... More
od185336/2019_2020 : Providing and applying 2 pack solvent based exterior grade PU finish on wood work after scraping and cleaning the surface applying top coat of two coats PU Gloss/ Matt/ Semi-Gloss (DFT 2x25 microns) over two coat of PU sealer (DFT 2x22 microns), over one coat of epoxy block primer(DFT 20 microns) to prevent anti leaching. Sanding shall be done along the grains using grid/water /emery paper before applying primer, sealer and PU to get a perfectly smooth and uniform finish. The system shall be scratch, heat and stain resistance and the rate shall include cost and conveyance of all materials, lead ,lift, all labour charges etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.
6441.59
-
-
... More
13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
10
-
-
... More
13.50.4 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
10
-
-
... More
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
196
-
-
... More
Water Proofing works
-
-
-
... More
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
498.12
-
-
... More
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
664.4
-
-
... More
22.22A : Providing and applying fibre reinforced elastomeric liquid water proofing membranewith resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top ofconcrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming ofelastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thickness of completeapplication/system not less than 500 microns). The operation shall be carried outafter scrapping and properly cleaning the surface to remove loose particles withwire brushes, complete in all respect as per the direction of Engineer-in-Charge.
1921.17
-
-
... More
22.23A : Providing & Applying polymer modified, flexible cementatious negative sidewaterproofing coating with elastic waterproofing polymers on interior wall plastersurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatiouswaterproofing polymer(dilution with water in the ratio of 1:1) and two coats ofcementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) afterscrapping and properly cleaning the surface to remove pre-existing paint film &loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
2141.13
-
-
... More
22.26 : Providing and applying of swellable type water stop tape, 19mm x 25mm thick inlinear meter (expansive nature) for construction joints treatment of RCC structuresuch as raft slab, retaining walls, water storage tank and at the junctions of raftslab with the retaining walls etc.. After cleaning the surface, one coat of requiredprimer for swellable water stop tape shall be applied throughout the length of thejoint @3.78 litre per 240 running meter. Over the primed surface swellable typewater stop tape shall be placed. The work shall be carried out all complete as perspecification and the direction of the engineer-in-charge. The product performanceshall carry guarantee for 10 years against any leakage.
312.2
-
-
... More
od63940/2020_2021 : 15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm including mixing water proofing material in separately) proportion recommended by manufacturer at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. (water proofing liquid will be paid separately)
3125.05
-
-
... More
13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers..(Note:Quantity of cement used in respective item shall be measured for payment.Dosage of water proofing compound shall be 1kg per bag of cement or as per manufactures reccommendation)
17157.06
-
-
... More
Miscellaneous works
-
-
-
... More
od67429/2020_2021 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate 0.075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
6368.55
-
-
... More
od67457/2020_2021 : Soling with soling stone of size 150 to 75 mm brokenstone and blinding materials, including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading blinding material in 12mm thick layers and sweeping the same to fill the voids,watering profusely and consolidating with hand rammer/ plate vibrator etc complete as per the direction of Engineer-in - Charge.
18.4
-
-
... More
19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe
50
-
-
... More
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
... More
19.36.1 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.450 mm dia RCC pipes.
70
-
-
... More
19.36.3 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.900 mm dia RCC pipes.
70
-
-
... More
od67462/2020_2021 : Providing and laying of compacted fill with 10mm to downgraded metal (Coarse rubble granite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
2.28
-
-
... More
od67465/2020_2021 : Providing and laying of compacted fill with 20mm to downgraded metal (Coarse rubble granite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
2.28
-
-
... More
od67469/2020_2021 : Providing and laying of compacted fill with 40mm metal (Coarse Rubble Granite Stone)combined with a downgraded stone up to 30mm to form a contour and elevations to the desired level as perDrawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to becompleted as per detailed specifications and or as approved by Engineer-in-charge
3.41
-
-
... More
od67470/2020_2021 : Providing and laying of 20mm downgraded metal (Coarse rubble granite Stone) of approved quality as filter media around the drainage pipes in the sides of trench as per the directions of Engineer-in-charge. Rate inclusive of all materials,transportation and labour charges complete.The work has to be executed as per detailed specifications , and or as approved by Engineer -in -charge
6.83
-
-
... More
od67489/2020_2021 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia RCC pipes.
10
-
-
... More
od73003/2019_2020 : Providing and constructing soak pit 2 m x 2 m x 2 m size with honey comb brick work on the sides upto a height of 1.2 m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.7 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
6
-
-
... More
od75756/2020_2021 : Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height, providing and filling brick bats graded, upto a height of 1.2 m, providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
1
-
-
... More
Road and Paving Works
-
-
-
... More
2.3.2.A : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle etc complete as per MoRTH Specifications - By Mechanical Means
5.55
-
-
... More
3.6 : Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m etc complete as per MoRTH Specifications
1787.74
-
-
... More
3.7 : Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site within all lifts and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc complete as per MoRTH Specifications
7150.95
-
-
... More
3.8.A : Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal within all lifts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc complete as per MoRTH Specifications. Mechanised
10
-
-
... More
3.17 : Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2 of MoRTH Specifications
1053.21
-
-
... More
3.18 : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 of MoRTH Specifications
6327.51
-
-
... More
4.1.A.2 : Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MoRTH Specifications. Grading-II - Plant Mix Method
1845.83
-
-
... More
4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc complete as per MoRTH Specifications
3050.17
-
-
... More
5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means etc complete as per MoRTH Specifications
12200.67
-
-
... More
5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom etc complete as per MoRTH Specifications .
24051.84
-
-
... More
5.4.2a : Dense Graded Bituminous Macadam :- For Grading II (26.5 mm nominal size)Providing and laying dense graded bituminous macadam with 80-100 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG 30) @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.
601.3
-
-
... More
5.6.2.a : Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respectsGrading - II (13.2 mm Nominal Size)
359.73
-
-
... More
12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Technical Specifications. PCC Grade M15
112.97
-
-
... More
13.5.F.P.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump etc complete as per MoRTH Specifications - Height upto 5m
277.29
-
-
... More
13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MoRTH Technical Specifications
16.64
-
-
... More
8.13 : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes etc complete as per MoRTH Specifications
267.45
-
-
... More
8.35 : Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 of MoRTH Specifications. Road Markers/Road Stud with Lense Reflector :-
160
-
-
... More
8.1.B : Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 325 mm high in M 20 Grade PCC Using Concrete Batching and Mixing Plant on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of MoRTH Specifications
1128
-
-
... More
8.8 : Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces etc complete as per MoRTH Specifications.
676.8
-
-
... More
16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
380
-
-
... More
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
500
-
-
... More
16.91.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.
2000
-
-
... More
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
42.08
-
-
... More
2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia
90
-
-
... More
2.10.1.3 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
66
-
-
... More
17.5.1 : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern
9
-
-
... More
17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm
24
-
-
... More
17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.
103
-
-
... More
18.7.1 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall15 mm nominal outer dia pipes
34
-
-
... More
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
606
-
-
... More
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
390
-
-
... More
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
197
-
-
... More
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
594
-
-
... More
18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes
474
-
-
... More
18.8.1 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.15 mm nominal outer dia pipes
636
-
-
... More
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
1374
-
-
... More
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
1681
-
-
... More
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
714
-
-
... More
18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes
90
-
-
... More
18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes
200
-
-
... More
18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes
230
-
-
... More
18.9.8 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work75 mm nominal inner dia pipes
833
-
-
... More
18.9.9 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work100 mm nominal inner dia pipes
1637
-
-
... More
18.9.10 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work150 mm nominal inner dia pipes
204
-
-
... More
18.12.6 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore
86
-
-
... More
18.12.7 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore
90
-
-
... More
18.12.8 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore
130
-
-
... More
18.16.1 : Providing and fixing brass stop cock of approved quality :15 mm nominal bore
29
-
-
... More
18.16.2 : Providing and fixing brass stop cock of approved quality :20 mm nominal bore
70
-
-
... More
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
79
-
-
... More
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
31
-
-
... More
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
34
-
-
... More
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
30
-
-
... More
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
18
-
-
... More
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
5
-
-
... More
18.17.6 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore
2
-
-
... More
18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal
4
-
-
... More
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal
11
-
-
... More
18.19.5.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal
4
-
-
... More
18.19.6.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreHorizontal
3
-
-
... More
18.31.1.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameterClass II
5
-
-
... More
18.31.3.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):150 mm diameter Class II
5
-
-
... More
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
127
-
-
... More
18.60.1 : Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):80 mm dia nominal bore
1
-
-
... More
18.60.2 : Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):100 mm dia nominal bore
1
-
-
... More
19.9.1.1 : Constructing brick masonry circular type manhole 0.91 m internal dia at bottam and 0.56 m dia at to[ in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ), and making necessary channel in cement concrete 1:2:4 ( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:0.91 m deep with S.F.R.C cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):With cement burnt clay F.P.S. (non modular) bricks of class designation 7.5
134
-
-
... More
19.10.1 : Extra depth circular type manhole 0.91 m internal dia ( at bottom) beyound 0.91 m to 1.67 mWith common burnt clay F.P.S. ( non modular) bricks of class designation 7.5
7
-
-
... More
19.11.1.1 : Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 ( 1 cement: 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:1.68 m deep with SFRC cover and frame (heavy duty Hd- 20 grade designation)
560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg fixed in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. ( Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)With common burnt clay F.P.S(non modular) bricks of class designation 7.5
1
-
-
... More
19.12.1 : Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
1
-
-
... More
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
114
-
-
... More
50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
72
-
-
... More
50.18.9.18.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
449
-
-
... More
50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
840
-
-
... More
od75591/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm nominal outer dia pipes
425
-
-
... More
od76207/2020_2021 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 65 mm nominal outer dia pipes
62
-
-
... More
od76232/2020_2021 : :Providing and fixing C.I. basket type dirt box strainer for bulk type water meter withnuts, bolts, all accessories etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer in charge 65mm dia
1
-
-
... More
od76820/2020_2021 : Providing and fixing light duty Cast Iron Manhole covers including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by Engineer in Charge. 600x600mm
12
-
-
... More
od178329/2019_2020 : Providing and fixing white vitreous china counter wash basin of approved make including oneCP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mmdia CP brass waste coupling, 32 mm dia CP brass bottle trap,CP brass 15mm angle valve,completeincluding CI/MS brackets duly painted, nuts, washers, etc. complete,cost and conveyance of all materialslabour charges ,lead, lift necessary wall cutting / chasing and making good the walls,floors,slab,testingand commissioning to the satisfaction of Engineer in charge at all levels. (Model no:Jaquar CNS-WHT-705+ Jaquar OPPCHR15001PM+Jaquar ALD-CHR- 769L250X190+Jaquar FLR OPP CHR 15053PM+ Jaquar ALD-CHR-709 +Jaquar ALD CHR 709or equivalent
123
-
-
... More
od178330/2019_2020 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
170
-
-
... More
od178332/2019_2020 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame ; Round Frame with Flat Round Cover with Rubber Seal ; SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels. 75mm dia
20
-
-
... More
od178333/2019_2020 : Providing and fixing CP robe hook etc complete testing and commissioning to the satisfaction of Engineer in Charge at all levels. Models: Jaquar ACN CHR 1191N or equivalent
111
-
-
... More
od178334/2019_2020 : Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing.
33.67
-
-
... More
od178335/2019_2020 : Supplying and fixing approved quality white vitreous china urinal division plate 700 x 340 including cost and conveyance of all material, labour charge, lead, lift, etc. complete as directed by the Engineer-in-Charge. Models Hindware F61001 or equivalent
9
-
-
... More
od178336/2019_2020 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame ; Round Frame with Flat Round Cover with Rubber Seal ; SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels. 110mm dia
20
-
-
... More
od178341/2019_2020 : Providing and fixing sanitary fixtures for handicaped toilet including one wash basin , one pair mounting brackets,one number pillar cock ; all other related fittings like bottle trap ,angle cock,waste coupling, etc,one number EWC ; Cistern complete with fittings ; seat cover, one no. hinged rail 76cm ; 4nos. of grab rails 60cm etc designed for people with special needs comes with as per manufactures specification including cutting and making good the walls and floors wherever required as per drawing and as directed by Engineer in charge. (Model no: Hindware 70002 or equivalent)
3
-
-
... More
od178342/2019_2020 : Supply and erection of pressure sand filter of size 1.0m dia x 1.5 m HOS, (approx.) vertical type pressure vessel, mild steel internally and externally epoxy coated, 4mm shell thickness, 5mm dish thickness, flanged top and bottom, operating pressure of 3.5 Kg/cm2, complete with CI valves and graded pebble and sand as media, frontal piping, pressure gauges, strainers, supporting structure, back wash arrangement, etc and all other accessories Flow rate - 10m3/hr
1
-
-
... More
od178343/2019_2020 : Providing and fixing concealed floor trap with cockroach trap (multi trap), , SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
7
-
-
... More
od178344/2019_2020 : Providing and fixing cast steel( ASTM A 282 Gr. WCB) fabricated Y type strainer rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges as per ASME 16.5 CI-300RF(Drilled) serated etc.including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge 50mm type strainer
4
-
-
... More
od178345/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. 65mm Dia
7
-
-
... More
od178346/2019_2020 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
9
-
-
... More
od178348/2019_2020 : Providing and fixing sink cock of approved quality conforming to IS: 8931.Models Jaquar FLR CHR 5357N or equivalent
24
-
-
... More
od178349/2019_2020 : Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.
41
-
-
... More
od178350/2019_2020 : Providing and fixing pressmatic liquid soap dispenser of approved make including cost and conveyance of all materials labour charges ,lead, lift, cutting and making good the walls, floors and slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer in Charge at all levels .Models: Jaquar SDR WHT DJ0010F or equivalent
91
-
-
... More
od178351/2019_2020 : Providing and fixing 110mm dia PVC vent cowl to pipe already fixed as directed by Engineer-in-charge at all levels. 110mm dia
61
-
-
... More
od178352/2019_2020 : Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.75 mm dia
33
-
-
... More
od178353/2019_2020 : Providing and fixing premium quality C.P. brass overhead shower , shower arm and stop cock of approved make and model including cost of all materials, labour etc., complete as directed by the Engineer-in-Charge at all levels.Models Jaquar OHS-CHR 1989+SHA CHR 477+FLR CHR 5083NK+ALDCHR189 or equivalent
72
-
-
... More
od178363/2019_2020 : Supply and erection of activated carbon adsorber 1.0 m dia x 1.5m HOS, (approx.) vertical type pressure vessel, mild steel internally and externally epoxy coated, 4mm shell thickness, 5mm dish thickness, flanged top and bottom, operating pressure of 3.5 kg/cm2 complete with CI valves, internals, frontal piping, filter media including activated carbon, pressure gauges, strainers, supporting structures, back wash arrangement, sampling valves, etc. complete Flow rate - 10 m3/hr
1
-
-
... More
od178364/2019_2020 : Chemical dosing system Supplying and fixing of electronic dosing pump with all wetted parts in PP construction suitable for pumping HOCl solution including cost of valves, suction and delivery lines using heavy duty PVC tubes, FRP tank of 80 litres capacity, FRP motor cover etc. and complete with all accessories. Capacity : 6 lph @ 3.5 kg/cm2
1
-
-
... More
od178366/2019_2020 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 100mm dia
9
-
-
... More
od178367/2019_2020 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 80mm dia
9
-
-
... More
od178368/2019_2020 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 65mm dia
9
-
-
... More
od178369/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 100mm dia
7
-
-
... More
od178370/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 80mm dia
7
-
-
... More
od178372/2019_2020 : Supply and installation of water level indicator with electronic integrated circuit and necessary accessories etc complete as directed by the Engineer in charge at all levels
4
-
-
... More
od178373/2019_2020 : Supplying,installing, testing and commisioning of electronic integrated circuits and wireless water level controller including necessary cabling and transformers with all accessories etc complete as directed by Engineer in charge for water supply level control in water tanks
4
-
-
... More
od178374/2019_2020 : Providing and fixing CI vent cowl as directed by the Engineer in Charge at all levels 80 mm dia
8
-
-
... More
od178375/2019_2020 : Providing and fixing CI Y type strainer 65mm dia rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge Other Engineering Organisations P R I C E 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
2
-
-
... More
od178377/2019_2020 : Providing and fixing C.I. grating 150x150 mm as directed by the Engineer-in-charge
80
-
-
... More
od178379/2019_2020 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 80 mm nominal dia pipes
30
-
-
... More
od178381/2019_2020 : Supply,Fixing ; commissioning of a double acting air and vaccum release 1/2 Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar.
66
-
-
... More
od178384/2019_2020 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 100 mm nominal outer dia pipes
120
-
-
... More
od178385/2019_2020 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot ; cold water supply, including all CPVC plain ; brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 150 mm nominal outer dia pipes
60
-
-
... More
od178405/2019_2020 : Providing and fixing gun metal non-return valve of approved quality (screwed end): 100 mm nominal bore Horizontal
3
-
-
... More
od178408/2019_2020 : Providing and fixing C.I. basket type dirt box strainer 50mm dia for bulk type water meter with nuts, bolts, rubber etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
1
-
-
... More
od178409/2019_2020 : Providing and fixing C.I. basket type dirt box strainer for bulk type water meter with nuts, bolts, all accessories etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer in charge 80mm dia
1
-
-
... More
od178411/2019_2020 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 150mm dia
7
-
-
... More
od178415/2019_2020 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.: 300 mm dia RCC pipes.
70
-
-
... More
od178416/2019_2020 : Providing and fixing CI Y type strainer 80mm dia rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge Other Engineering Organisations P R I C E 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
4
-
-
... More
od178417/2019_2020 : Supplying, fixing and commissioning of centrifugal pump of CI construction, bronze impeller complete with motor,working with 415 V, 3 pH, 50 Hz including base plate foundation bolts, nuts, pressure gauge, priming arrangements and all accessories. Capacity : 35cum/hr, Head : 29 metre
2
-
-
... More
od178418/2019_2020 : Supplying, fixing and commissioning of centrifugal pump of CI construction, bronze impeller complete with motor,working with 415 V, 3 pH, 50 Hz including base plate foundation bolts, nuts, pressure gauge, priming arrangements and all accessories. Capacity :23 cum/hr, Head : 32 metre
2
-
-
... More
od178419/2019_2020 : :Supplying and fixing of centrifugal pump, with CI construction, CI impeller, mechanical seal, complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels .Capacity:10 m3/hr Head: 37m
2
-
-
... More
od178420/2019_2020 : Supplying ,fixing, testing and commissioning of portable drainage pump with 12mm solid handling, with stainless steel construction, stainless steel impeller complete with motor , with carrying handle and all accessories and working with 415V, 3ph and 50 Hz frequencyCapacity: 25m3/hour,Head-15m
2
-
-
... More
od178422/2019_2020 : Supplying,installation, testing and commissioning of recirculation pumps with Mechanical seal CI Impeller etc. 5 HP motor, Flow rate: 40 m3/hr @10m head. Voltage 1.5 kW with pre filter in Thermo plastic 2 pumps(1working, 1 standby). Installation to be executed as per the directions of the Engineer - in - charge.
2
-
-
... More
od178423/2019_2020 : supplying and fixing centrifugal pump with CI construction,Ci impeller complete with motor,base plate,foundation ,bolts,nuts,pressure gauge and all accessories and working with 415v,3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by engineer in charge. Head 29 m, Discharge- 35 m3/hr
2
-
-
... More
od178426/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 40 mm
10
-
-
... More
od178427/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 50 mm
13
-
-
... More
od178428/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 65 mm
9
-
-
... More
od178429/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 80 mm
8
-
-
... More
od178430/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 20 mm
10
-
-
... More
od178431/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 25 mm
10
-
-
... More
od178432/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 32 mm
16
-
-
... More
od178433/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 40 mm
5
-
-
... More
od178434/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 50 mm
2
-
-
... More
od178435/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 65 mm
2
-
-
... More
od179754/2019_2020 : Providing and fixing white vitreous china wall mountedwater closet of approved shape including providing ; fixing white vitreous concealed china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including wall plate, nuts bolts and gasket etc complete. Models Jaquar FLS WHT 5951+JCS WHT 2400+JCP CHR 152415 or equivalent.
8
-
-
... More
od179757/2019_2020 : Providing and fixing wall mounted tissue dispenser of approved make including cost and conveyance of all materials labour charges ,lead, lift, ,cutting and making good the walls and floors wherever required, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-Incharge at all levels.Models- Euronics EP 23 or equivalent
12
-
-
... More
od179770/2019_2020 : Providing and fixing toilet paper holder:Models Jaquar AHS-1551 or equivalent
111
-
-
... More
od179820/2019_2020 : Providing and fixing of CP brass towel rod etc including all accessories,cost and conveyance of all materials,labour charges,lead etc. as directed by the Engineer in Charge at all levels.Models Jaquar ACN-1111B or equivalent
81
-
-
... More
od179885/2019_2020 : Supplying and fixing Whirlpool with all accessories etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. Models Jaquar Wellness JWP-WHTALIVE180CX+JWA-WHTALIVELPX or equivalent
2
-
-
... More
od179968/2019_2020 : Supplying and fixing steam bath with all accesories etc. complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. Models Jaquar Wellness JSG-BLKCPSQUARE+JSG-BLKPIUVAP5000ST or equivalent
4
-
-
... More
od179969/2019_2020 : Supplying and fixing Sauna back to wall white colour glossy finish, with all accessories complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. Models- Jaquar Wellness JSA-NAWT16120+JSA-NAWDLX9011 or equivalent
2
-
-
... More
od181816/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 2.5" size
4
-
-
... More
od181817/2019_2020 : Supplying ; fixing at site in position butterfly valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 2" size
12
-
-
... More
od181884/2019_2020 : Providing and fixing C.I. basket type dirt box strainer 100 mm dia for bulk type water meter with nuts, bolts, rubber etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
1
-
-
... More
od182001/2019_2020 : Supplying,installation, testing and commissioning of total 7000lpd(3500*2) pressurised solar water heater system and heat pump 10tonne(38kw) with all accessories etc complete as per direction of Engineer in charge
1
-
-
... More
od182015/2019_2020 : Supply, installation, testing and commissioning of multi VFD hydro pneumatic system, IE3 motors, skid mounted, complete ready-to-connect packaged variable speed water pressure booster station. The packaged variable speed water pressure booster station shall be complete with vertical multi stage centrifugal pumps connected in parallel, high efficiency IE 3 motors, an air-cooled external variable frequency drive, intelligent multi-pump controller, the controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating including Main power switch; Motor circuit breakers for UV/OV ; OL protection; pump run status and fault indication lamp; The controller shall have PID control loop with adjustable PI parameters. Auto/Manual selector switch; Soft BMS compatibility; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; hot dip galvanised common base frame; and diaphragm pressure vessel PN16 etc complete as per direction of Engineer-In charge at all levels. For driking water distribution Total system flow: 17m3/hr Each pump flow capacity: 9 m3/hr Total Head: 52 metres Total no of pump: 3 nos No of working pumps: 2 nos No of stand by pumps: 1 no Motor power of each pump: 3KW Pressure tank capacity: 100 litres
1
-
-
... More
od182016/2019_2020 : Supply, installation, testing and commissioning of multi VFD hydro pneumatic system, IE3 motors, skid mounted, complete ready-to-connect packaged variable speed water pressure booster station. The packaged variable speed water pressure booster station shall be complete with vertical multi stage centrifugal pumps connected in parallel, high efficiency IE 3 motors, an air-cooled external variable frequency drive, intelligent multi-pump controller, the controller shall be mounted in a control cabinet with an IP 41 enclosure of suitable rating including Main power switch; Motor circuit breakers for UV/OV ; OL protection; pump run status and fault indication lamp; The controller shall have PID control loop with adjustable PI parameters. Auto/Manual selector switch; Soft BMS compatibility; hot Dipped Galvanised suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; hot dip galvanised common base frame; and diaphragm pressure vessel PN16 etc complete as per direction of Engineer-In charge at all levels. For Flushing Water distribution Total system flow: 9m3/hr Each pump flow capacity: 5 m3/hr Total Head: 42 metres Total no of pump: 3 nos No of working pumps: 2 nos No of stand by pumps: 1 no Motor power of each pump: 1.5 KW Pressure tank capacity: 100 litres
1
-
-
... More
od182180/2019_2020 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipesincluding collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.complete 200 mm dia R.C. C. pipe
70
-
-
... More
od182181/2019_2020 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge External work 160 mm OD(10kg/cm2)
180
-
-
... More
od182191/2019_2020 : Supply, laying ; jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes ; fittings as per the manufacturers specifications ,trenching ,refilling ; testing of joints complete for extrenal works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge.-250 mm-10kg/cm2
275
-
-
... More
od182192/2019_2020 : Supply, laying ; jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes ; fittings as per the manufacturers specifications ,trenching ,refilling ; testing of joints complete for extrenal works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge.-315 mm dia- 10 kg/cm2
72
-
-
... More
od182214/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90 mm dia 4 Kgf/cm2 - External work- Exposed on wall
30
-
-
... More
od182215/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90 mm dia 6 Kgf/cm2 - External work- Exposed on wall
210
-
-
... More
od182251/2019_2020 : Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber fittings etc. ( The tail pieces if required will be paid separately): 50 mm dia nominal bore
2
-
-
... More
od182252/2019_2020 : Providing and fixing enclosed type water meter (bulk type) 65mm dia conforming to IS :2373 and tested by Municipal Board complete with bolts, nuts, rubber etc. (The tail pieces if required will be paid separately) including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge.
1
-
-
... More
od182263/2019_2020 : Supplying ; fixing at site in position pressure reducing valves of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge 80 mm
2
-
-
... More
od182266/2019_2020 : Supplying and fixing Pressure Guage including cost and conveyance of all materials
94
-
-
... More
od182294/2019_2020 : Providing and fixing CI Y type strainer rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials,labour etc. complete and as directed by Engineer-in-Charge 150mm type strainer
2
-
-
... More
od182298/2019_2020 : Providing and fixing CI Y type strainer rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials,labour etc. complete and as directed by Engineer-in-Charge 100mm type strainer
3
-
-
... More
od182300/2019_2020 : Supplying,installation, testing and commissioning of Rainwater Harvesting Pond Filteration and aeration system including filters, pumps, pipes, valves and all associated accessories per the directions of the engineer in charge
1
-
-
... More
od182309/2019_2020 : Supplying,installing, testing and commisioning of stainless steel floor gratings with all accessories etc including cost and conveyance of all materials , labour charges complete as directed by the Engineer in charge at all levels 3000*300 mm rectangle grating
144
-
-
... More
od182313/2019_2020 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work 150 mm dia nominal bore
80
-
-
... More
od182314/2019_2020 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work 100 mm dia nominal bore
120
-
-
... More
od182361/2019_2020 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge External work 250 mm OD(10kg/cm2)
320
-
-
... More
od182362/2019_2020 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge External work 200 mm OD(10kg/cm2)
60
-
-
... More
od182389/2019_2020 : Supplying and fixing following size cover with frame(heavy duty) for manholes including cost and conveyance of all materials, labour charges, lead, lift, sundries, etc., complete as directed by the Engineer-in-Charge at all levels. 450mm diameter D.I. cover (Heavy duty) the weight of the cover to be not less than 55 Kg
14
-
-
... More
od182416/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Exposed Works-160 mm
6
-
-
... More
od182417/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Exposed Works-200 mm
6
-
-
... More
od182653/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work 50 mm dia
245
-
-
... More
od182654/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Exposed Works-75 mm
434
-
-
... More
od182699/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work-160 mm
30
-
-
... More
od182700/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work-110 mm
366
-
-
... More
od182701/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Concealed Work 75 mm
1290
-
-
... More
od182703/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-Exposed Works-110 mm
868
-
-
... More
od182743/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-External Works 75 mm
62
-
-
... More
od182744/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-External Works 110 mm
360
-
-
... More
od182745/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-External Works -160 mm
410
-
-
... More
od182746/2019_2020 : Supplying,Installing,Testing and Commissioning to the satisfaction of Engineer in charge of low noise 3 layerred poly propylene pipes ; push fittings (PP) of sound level 13 dB @ 4L/sec for non pressurized domestic drainage in accordance with system standards of DIN 4102 and specials of approved make such as tees elbows, unions,bends,sockets bends,flanges, reducers, end caps,saddles, plugs,coupling, etc. including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers,ferrule,pipe supports, cost of extra wastage of fittings during laying of pipe line such as rectification and recharging of the existing line as and when required etc.hire of tools and plant, cost and conveyance of water for testing after connecting to mains including all testing pipe line to the specified hydrostatic test pressure,rectifying any leakage or defects etc., cutting and making good the walls etc. complete.as directed by Engineer-in-Charge for water supply.(Proper pipe supports shall be provided at suitable locations.)-External Works-200 mm
80
-
-
... More
od183151/2019_2020 : Supplying and fixing C.I. cover with frame for manholes : 600x600 mm square C.I. cover (Heavy duty) the weight of the cover to be not less than 210 kg. Complete all works including cost and conveyance of all materials, all labour charges,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge
20
-
-
... More
od183153/2019_2020 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge. External work 110 mm OD(10kg/cm2)
120
-
-
... More
od183164/2019_2020 : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 300 mm dia RCC pipes.
10
-
-
... More
od183198/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 10Kgf/cm2 - External work- Exposed on wall
130
-
-
... More
od183199/2019_2020 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 10Kgf/cm2 - External work- Exposed on wall
18
-
-
... More
od183223/2019_2020 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 10 kgf/cm2
60
-
-
... More
od183224/2019_2020 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 10 kgf/cm2
160
-
-
... More
od183225/2019_2020 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes ; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2
60
-
-
... More
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
-
-
... More
12.44 : Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
-
-
... More
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
1
-
-
... More
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
6
-
-
... More
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
12
-
-
... More
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
6
-
-
... More
50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
12
-
-
... More
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
21
-
-
... More
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
21
-
-
... More
od67478/2020_2021 : Providing and fixing stainless steel soap dish including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.
1
-
-
... More
od67482/2020_2021 : Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.2 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
1
-
-
... More
Supplying and fixing of screen of SS 304 construction using SS sheet of 2 mm thick with 5 mm opening size, detachable type with handle, frame, bracings, suitable for placing inside a bar screen chamber of size 0.7 m x 1 m x 1 m
1
-
-
... More
Supply,erection, testing and commissioning of twin lobe air blower for indoor application complete with air filter, motor of 1450 rpm with starter in suitable enclosure ,pressure gauges, pressure relief valve, acoustic hood, suction silencer with suitable flanges, common motor and compressor base frame with motor belt tightening arrangement interconnecting line with flanges including all accessories complete as per technical specification.
Capacity : 30 m3/hr, Pressure 0.5 kg/cm2
2
-
-
... More
Sullage Pump (SP)
Supply,erection, testing and commissioning of self priming, non clog centrifugal pump rated continuous duty and efficiency, CI construction, bronze impeller, mechanical seal, complete with 3 phase motor with 3 phase DOL starter with on/off push button,thermal overload relay, and auxillary &power contactors, ON/OFF/TRIP push button in suitable IP 54 enclosure, SS shaft, FRP motor cover, pressure gauge suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification.
Capacity: 1.7 m3/hr.
Head: 15 m
2
-
-
... More
Sewage Transfer Pump (STP)
Supply,erection, testing and commissioning of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CI construction, bronze impeller, mechanical seal, complete with 3 phase motor with 3 phase DOL starter with on/off push button,thermal overload relay, and auxillary &power contactors, ON/OFF/TRIP push button in suitable IP 54 enclosure, SS shaft, FRP motor cover, pressure gauge suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification.
Capacity: 2.5 m3/hr.
Head: 15 m
2
-
-
... More
Filter Feed Pump (FFP)
Supply,erection, testing and commissioning of centrifugal pump for rated continuous duty and efficiency CI construction, bronze impeller, mechanical seal, complete with 3 phase motor with 3 phase DOL starter with on/off push button,thermal overload relay, and auxillary &power contactors, ON/OFF/TRIP push button in suitable IP 54 enclosure,FRP motor cover, pressure gauge, operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects as required by the standard specifications complete with all accessories as per technical specification.
Capacity: 2.5 m3/hr.
Head: 35 m
2
-
-
... More
Treated Water Pump (TWP)
Supplying and fixing of centrifugal pump, for rated continuous duty and efficiency CI construction, bronze impeller, mechanical seal, complete with 3 phase motor with 3 phase DOL starter with on/off push button,thermal overload relay, and auxillary &power contactors, ON/OFF/TRIP push button in suitable IP 54 enclosure,FRP motor cover, pressure gauge, operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects as required by the standard specifications and shall suit following capacities complete with all accessories as per technical specification.
Capacity : 2.5 m3/hr.
Head : 30 m
2
-
-
... More
Sludge Feed Pump (SFP)
Supply,erection, testing and commissioning of self priming, non clog centrifugal pump, for rated continuous duty and efficiency ,CI construction, bronze impeller, mechanical seal, complete with 3 phase motor with 3 phase DOL starter with on/off push button,thermal overload relay, and auxillary &power contactors, ON/OFF/TRIP push button in suitable IP 54 enclosure, SS shaft, FRP motor cover, pressure gauge, suitable for operation on 415+/-10% volts, 50 HZ, AC power supply etc. complete in all respects as required by the standard specifications and shall suit following capacities complete with all accessories as per technical specification.
Capacity: 1 m3/hr.
Head: 15 m
2
-
-
... More
Biomass media Supplying and fixing of non-clogging freely moving black media of PP construction, UV stablized, for MBBR reactor with surface area 400 m2/m3, dia 22mm and height 16 mm.
3
-
-
... More
Media for tube settler Supplying and fixing of media for tube settlers of UV stabilised rigid PVC material, angle of inclination 60 deg, vertical height 750 mm,surface area 11 m2/m3, sland height 866 mm, complete with all accessories as per technical specification
3
-
-
... More
Fine Bubble diffuser system (Type I)
Supplying and fixing of fine bubble diffusers (2 nos.) of 90 mm dia,1000mm length ,EPDM make with capacity 10 m3/hr per diffuser with SS tee 1" x 1 ", SS lifting hook 8 mm, SS foundation bolt 6 mm, SS C clamp suitable for 1" O.D, hose, PP Rope, PP swivel nut, PP sleeve, Silicone Washer, SS hose clamp, RCC block complete as per technical specification
2
-
-
... More
Fine bubble diffuser system (Type-II)
Supplying and fixing of fine bubble diffusers (1 no.) of 90 mm dia,1000mm length ,EPDM make with capacity 10 m3/hr per diffuser with SS tee 1" x 1 ", SS lifting hook 8 mm, SS foundation bolt 6 mm, SS C clamp suitable for 1" O.D, hose, PP Rope, PP swivel nut, PP sleeve, Silicone Washer, SS hose clamp, RCC block complete as per technical specification
1
-
-
... More
Pressure Sand Filter Supply and erection of pressure sand filter with FRP construction with epoxy coating and frontal piping arrangement, pressure gauge and all other related accesories Flow rate - 2.5 m3/hr
1
-
-
... More
Activated Carbon Filter Supply and erection of Activated Carbon filter with FRP construction with epoxy coating and frontal piping arrangement, pressure gauge and all other related accesories Flow rate - 2.5 m3/hr
1
-
-
... More
Chlorine dosing system Supplying and fixing of electronic dosing pump with all wetted parts in PVC construction suitable for pumping HOCl solution including cost of suction and delivery lines using PVC tubes, HDPE tank of 200 litres capacity, FRP motor cover etc. and complete with all accessories. Capacity : 0-12 lph @ 3 kg/cm2
2
-
-
... More
Chemical dosing system Supplying and fixing of electronic dosing pump with all wetted parts in PVC construction suitable for pumpiing chemical solution including cost of suction and delivery lines using heavy duty PVC tubes, HDPE tank of 200 litres capacity, FRP motor cover etc. and complete with all accessories. Capacity : 0-12 lph @ 3 kg/cm2
4
-
-
... More
Aeration grids for ET
Supply and fixing of SS 304 air grid using SS pipes, fittings, necessary supports for Equalization tank of size 3m x 2.3m x 2.5m
1
-
-
... More
Agitator for SS
Supply of Agitator of SS solid shaft of size 25mm, SS impeller(Pitched type) with 0.5 Hp motor, gear, shaft, paddles, etc. complete with all accessories for Sludge Sump of size 1m x 1m x 1.5m
1
-
-
... More
Primary Settling Tank
Supply and erection of MSEP (MS tank with epoxy coating) Settling tank of size 2m x 1.8m x 2.5m (SWD) with conical bottom, 5mm thick with supporting legs, operating platform, ladder, handrails, etc. and all other related accessories.
1
-
-
... More
Tube settler tank Supply and erection of MSEP (MS tank with epoxy coating) tank of size 1.85m x 1.85m x 2 m (SWD) with conical bottom, 5mm thickness with supporting legs, operating platform, ladder, etc. including all accessories.
1
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2,32mm OD
55
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2,40mm OD
60
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 , 50mm OD
49
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 , 63mm OD
32
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 ,75mm OD
39
-
-
... More
Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 ,90mm OD
46
-
-
... More
Supplying, threading, welding, fabricating, painting and jointing GI pipe of 'c' class with fittings such as tees, elbows, bends, flanges, checknuts, etc. complete as directed by the Engineer- in -Charge,20mm dia
12
-
-
... More
Supplying, threading, welding, fabricating, painting and jointing GI pipe of 'c' class with fittings such as tees, elbows, bends, flanges, checknuts, etc. complete as directed by the Engineer- in -Charge,40mm dia
10
-
-
... More
Providing and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete,25mm
3
-
-
... More
Providing and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete,65mm
2
-
-
... More
Providing and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete,80mm
6
-
-
... More
Supplying and fixing of PP Diaphragm valve with all accessories,40mm
7
-
-
... More
Supplying and fixing of PP Diaphragm valve with all accessories,50mm
1
-
-
... More
Providing and fixing gun metal non-return valve of approved quality,screwed and including all necessary fittings ,32 mm dia
4
-
-
... More
Supplying and fixing of foot valve flanged type CI construction including all necessary fittings as per the as per the direction of Engineer in charge,32 mm dia
4
-
-
... More
HT EQUIPMENTS & DG SET
-
-
-
... More
od178443/2019_2020 : HT Meteing Kiosk Design, supply, installation, testing and commissioning of Outdoor (IP54) Bidirectional TOD Metering kiosk and test terminal block, control fuses,armoured copper cable between CTPT unit and TOD meter, totally enclosed, free standing, floor mounting, dust vermin proof, outdoor cubicle type, made of 14SWG sheet steel powder coated with necessary cable alley busbar chamber. The panel shall be with 630A aluminium PVC sleeved busbar support insulators, space heater with thermostat, cubicle illumination lamp, MCBs for AC/DC Control etc, seal off bushings, control wiring with glass window for meter reading , locking facility etc.The KIOSK shall be made out of 2mm thick CRCA sheet steel, totally enclosed, IP 54, weather proof,undergone seven tank process,powder coated finish ,earthing,entire civil work including suitable foundation and all mounting accessories as required complete as per the requirement of K.S.E.B
1
-
-
... More
od191367/2019_2020 : 11 KV FP STRUCTURE Supply, erection, testing and commissioning of 11 KV 4P structure using 175x80 mm ISMB for poles and cross channel of ISMC 100x65mm and supporting structure for 11 kV components with MS channel bracings between consumer and supplier structure,cross arms,11 kV pin,disc and stay insulators, supports, jumpering / interconnecting conductors with '0'SWG Cu, anticlimbing arrangement using barbed wire,earthing etc. on a suitable concrete foundation complete including the cost of foundation The 4P structure shall consists of the following. (All the MS items shall be hot dip galvanised) (Note:The work shall be as per KSEI KSEB standards) 11 kV, 400A , single brake,TP, gang operated AB switch with operating handle locking mechanism - 2 No 11 kV Lighting Arrestor of 3nos -2 set 11 kV DO fuses of 3nos-2 sets 11kV outdoor type CT/PT unit with, class 0.2s, 15VA CT 11kV/110V class 0.2, 100VA PT - 1set The DP structure shall be with all necessary accessories for connecting 11kV cable .
1
-
-
... More
od178445/2019_2020 : Chain link fencing 1.8 mtr high chain link fencing over 600 mm high random rubble masonry as per drawing and specification, using 4 mm thick PVC coated chain link with a framework of 50x50x6 mm MS angle between vertical posts of ISMC 75 mm at 2400 mm intervel, which are fixed to the concrete footing (1:3:6) of size 450x450x300 mm (above GL) with adequate footing depth, between the RR masonry. RR masonry (450 mm thick) and 300 mm from ground level for foundation plinth in in cement mortar (1:6). The random rubble masonry is to be pointed using cement mortar 1:3 to have a flush finish. Earthing as per KSEI/KSEB standards shall be done around the periphery of the fencing.The MS frame work for chain link fencing is finished using zinc chromate primer 2 coats of synthetic enamel paint. 1.5 mtr wide gate shall be provided with suitable locking arrangements.The rate shall be inclusive of all materials, labour, lead, lift, etc including excavation works and fabrication and assembly works including all nuts, bolts other miscellaneuos items, etc. complete as per drawing
24
-
-
... More
od178458/2019_2020 : 750 KVA DG Set "Supply, Installation, Testing and Commissioning of 750kVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP ACB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 750 kVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500rpm, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank for 8 hours suitable continous operation, fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inculsive of all the civil work like RCC foundation The work should be as per Electrical Inspectorate/ Central Pollution control board standards applicable at the time of delivery.
1
-
-
... More
od178446/2019_2020 : Supplying and filling the proposed yard with 40 mm size blue jelly of 150 mm thick including cost and conveyance of all materials, labour charges etc. complete.
14.4
-
-
... More
od256563/2019_2020 : 630KVA 11KV/0.433KV UNITISED SUBSTATION Design, fabrication,Supply, installation, testing and commissioning of outdoor type Unitized Substation enclosure consisting of 11 KV, 630A, 26.3kA for 1 sec VCB with fully encapsulated vacuum interrupter panel , 630 kVA, 11kV/433V 3 Ph, 50 Hz, vector Dyn -11, dry type, Transformer with IP54 enclosure, winding temperature alarm and trip on transformer compartment and LV chamber suitable for termination of cable, complete with all standard fittings and accessories etc including necessary louvers and as per specifications attached in all respects as required. It shall includes all necessary control cabling for alarm, tripping indication, all internal cabling as required. The rate shall be inclusive of all materials, lead, lift, necessary civil works etc. complete as per single line diagram technical specification. HT Compartment 11KV, 26.3kA for 1 sec, 630A motorised VCB 630 Amp continously rated Cu busbar Self powered microprocessor based three over current and one earth fault relay with protection CT's - 1 set Master trip relay and all accessories complete as required. 24/48V DC POWERPACK - 1 set Provision for padlocking for open, close, earth and test position Transformer Compartment 630 kVA, 11kV/433V 3 Ph, 50Hz, dry type, vector Dyn -11 Transformer, copper wound, Class F insulation,outdoor distribution Transformer. Losses shall be as per ECBC guidlines amended upto date. The transformer shall have Delta on HV side and Star on LV side with on load tap changer range: + 5% to -5% in steps of 2.5%. The transformer shall have suitable enclosure for providing neutral CT of 200/5A 15VA 5P10 on earthed star point with connector for connection Earth Fault relay in HT/LT panel as per SLD "LV Chamber 1000A FP ACB,65kA and suitable for termination of 5 runs of 3.5C 400 sqmm Al XLPE cable
1
-
-
... More
LT PANEL BOARDS
-
-
-
... More
od180001/2019_2020 : MSB PANEL Supply, Installation, Testing Commissioning of LT Switch Boardcubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. .The panel shall be lockable type as per requirements of EB.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction. Incomer -1 and 2 1000A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae , RS 485 communication facility, - 1 Nos 1250A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable over current and earth fault relesae , RS 485 communication facility, - 1 Nos Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays including IPFC , 1250ATS with AMF relay as per SLD . Busbar TPN busbar chamber with Aluminium busbar suitable for 1300 A "Surge Protection Device Type 1+2- 1 set Fire protection The panel shall be provided with CO2 Liner heat detection/trace tube PANEL/modular FLOODING SYSTEM FOR ELECTRICAL PANELS consisting of CO2 cylinders with weight calculated on the basis of volume of single largest compartment within the panel. UL listed trace tube of required design length, for the following size of cylinders, also consisting of master control unit with digital display, load cell, discharge hooter/flashers, pressure gauges, pressure switches for low pressure/discharge indications interlocks with fire alarm system of the premises all accessories of complete functionality of system, complete as required as per the technical specification. Out goings 630A, TPN, 36kA, MCCB with Thermal Magnetic based release with OL SC protection - 2 Nos 400A, TP+NL, 36kA, MCCB with Thermal Magnetic based release with OL SC protection - 1 Nos 250A, TP+NL, 36kA, MCCB with Thermal Magnetic based release with OL SC protection - 4 Nos 400A FP MCCB ISO- 1No
1
-
-
... More
od180008/2019_2020 : SB 3 HVAC Supply, Installation, Testing Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction. INCOMER 250A,FP 36kA MCCB with thermal based adjustable release with OL SC protection - 1 Nos. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 300A TPN busbar chamber with Aluminium busbar. Out goings 160, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 3 Nos 100A,TP+NL 25kA MCCB with thermal based adjustable release with OL SC protection - 3 Nos.
1
-
-
... More
od180009/2019_2020 : SB -2 Services Supply, Installation, Testing and Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction. INCOMER 250A,FP 36kA MCCB with thermal based adjustable release with OL SC protection - 1 Nos. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 320A TPN busbar chamber with Aluminium busbar. Out goings 125A, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 1 Nos 100A, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 1 Nos 63A, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 8 Nos
1
-
-
... More
od180010/2019_2020 : SB -1 Lighting and Power Panel Supply, Installation, Testing Commissioning of LT Switch Board ,cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction. INCOMER 630A,FP 36kA MCCB with thermal based adjustable release with OL SC protection - 1 Nos. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 630A TPN busbar chamber with Aluminium busbar. Out goings 200, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 1 No 160, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 2 Nos 125, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 3 Nos
1
-
-
... More
od180516/2019_2020 : 200KVAR APFC PANEL Supply, Installation, Testing Commissioning of Capacitor Panel Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including provision for capacitor mounted inside the panel with adequate number of louvers and powder coated with approved shade and having following specific components all inter connections and following components as per drawing and technical specifications. Theb panel shall be of Form 3b construction. Incomer 400 A,36kA FP MCCB with adjustable thermal magnetic release with OL SC protection - 1 no. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 400A TPN busbar chamber with Aluminium busbar. Outgoing 125A, 25kA, TP MCCB with adjustable thermal magnetic release with OL SC protection - 3 nos 63A, 25kA, TP MCCB with adjustable thermal magnetic release with OL SC protection - 2 nos 32A, 25kA, TP MCCB with adjustable thermal magnetic release with OL SC protection -4 nos 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)- 3 Nos 20 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type)-1 No 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos 50 kVAr,480 V,50 Hz heavy duty capacitor(APP-H) with 7 % Seriesreactor - 3Nos 20 kVAr,480 V,50 Hz heavy duty capacitor(APP-H) with 7 % Seriesreactor - 1No 10 kVAr,480 V,50 Hz heavy duty capacitor(APP-H) with 7 % Seriesreactor -2 Nos 5 kVAr,480 V,50 Hz heavy duty capacitor(APP-H) with 7 % Seriesreactor - 2 Nos Control wiring required for no load compensation capacitor
1
-
-
... More
od180518/2019_2020 : SSB Lighting Supply, Installation, Testing Commissioning of LT Switch Board, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction.The panel shall be lockable type as per requirements of EB. INCOMER 200A,FP 36kA MCCB with thermal based adjustable release with OL SC protection - 1 Nos. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 200A TPN busbar chamber with Aluminium busbar. Out goings 63A,TP+NL 25kA MCCB with thermal based adjustable release with OL SC protection - 4 Nos. 40A,TP+NL 25kA MCCB with thermal based adjustable release with OL SC protection - 1 No.
1
-
-
... More
od181857/2019_2020 : Supply , Installation, Testing and Commissioning of 30 kVA, three phase input, three Phase output, true on-line UPS system with 15 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of two numbers of UPS unit and two set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP Power factor corrected from end 0.9 Pure sine wave output. Full time output voltage frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch System efficiency 90% Auto temperature compensation
1
-
-
... More
od68073/2020_2021 : PUMP PANEL Supply, installation, testing and commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, wall / floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction. Instruments RYB Indicating lamps LED type -As per SLD 4A SP MCB-As per SLD (0-500)V Class 1 with 90 deg defl. Scale-As per SLD (0-100A Class 1 with 90 deg defl. Scale -As per SLD Voltmeter selector switch -As per SLD Ammeter selector switch -As per SLD 100/5 A 15 VA Class 1 CTs -As per SLD ON/OFF/TRIP INDICATION LAMP -As per SLD ON/OFF INDICATION LAMP -As per SLD Digital multifunction meter with RS 485 facility to read V,A.Hz,PF,Kwh- As per SLD Incomer 100A FP Moulded Case Circuit Breaker with thermal based release (Ics =100%Icu= 35kA) -1Nos 100A TPN busbar chamber with Aluminium busbar Out goings 13A TP Motor protection circuit breaker with overload and short circuit protection -3Nos 10A TP Motor protection circuit breaker with overload and short circuit protection -5Nos 6.3A TP Motor protection circuit breaker with overload and short circuit protection -9Nos 1.6A TP Motor protection circuit breaker with overload and short circuit protection -3Nos 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary power contactors, for 5kW motor -2 Nos. 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary power contactors, for 4kW motor -2 Nos. 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary power contactors, for 3.7kW motor -2 Nos. 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary power contactors, for 2.2kW motor -8 Nos. 3 phase DOL starter with on/off push button,thermal overload relay, short circuit protection, single phasing preventer and auxillary power contactors, for .55kW motor -2 Nos. Space provsion for fixing DOLstarter-4Nos The panel shall be Top/ Bottom Entry/Exit and suitable for termination of cable system as per SLD and technical specification
1
-
-
... More
od181207/2019_2020 : SB MANU SCRIPT Supply, Installation, Testing Commissioning of LT Switch Board, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. The Panel shall be of Form 4 Construction.The panel shall be lockable type as per requirements of EB. INCOMER 250A,FP 36kA MCCB with thermal based adjustable release with OL SC protection - 1 Nos. Instruments 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays as per SLD . Busbar 250A TPN busbar chamber with Aluminium busbar. Out goings 125, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection -1 Nos 100, TP+NL, 25kA, MCCB with Thermal Magnetic based release with OL SC protection - 2 No 63A,TP+NL 25kA MCCB with thermal based adjustable release with OL SC protection - 4 Nos.
1
-
-
... More
od181731/2019_2020 : Supply , Installation, Testing and Commissioning of 10kVA, three phase input, three Phase output, true on-line UPS system with 15 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of one numbers of UPS unit andone set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP Power factor corrected from end 0.9 Pure sine wave output. Full time output voltage frequency regulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch / manual by pass switch System efficiency 90% Auto temperature compensation
1
-
-
... More
STP Panel-Supply, Installation, Testing and Commissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, form 4, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc.The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & technical specification. The panel shall be suitable for manual and automatic operation using timers, contactors and necessary control wiring
The panel shall be Top/Bottom Entry/Exit and suitable for termination of cable/Bus system as per SLD and technical specification
Incomers-125A, TP +NL, 25kA, MCCB with Thermal based release with OL & SC protection - 1 Nos
Instruments
4A Control MCB - 3nos
RYB indication lamp, LED type - 1 set
(0 to 500 )V Voltmeter for 3 phase, 4 wire operation - 1 no
Voltmeter selector switch - 1no
(0-125)A ammeter Acc. class 1 with 90 deg defl. Scale - 1No.
Ammeter selector switch- 1no
125/5A 15VA class 1 resin cast CT - 3nos
Busbar 100A TPN busbar chamber with Aluminium busbar.
Out goings
63A TP +NL MCCB -1 no
16A TP MCB - 8 nos
DOL starter with SPP suitable for pumpsets upto 5 HP- 6 Nos
ON/OFF/TRIP indication lamp, LED type - 6Set.
1
-
-
... More
Main Fire Pump Panel- Supply, Installation, Testing and Commissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised form 4 construction, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with bus bars extendable on both sides, including all the necessary internal wiring, suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates (required for short circuit rating, temperature rise test and IP 42classification) with following switchgears, metering instruments and accessories etc. complete in all respect as per drawing and technical specification. The panel shall be with top/bottom entry to receive incoming & outgoing cable, all necessary interconnection & accessories as per particular specification & single line diagram. The panel shall be Top Entry/Exit and suitable for termination of cable system as per SLD and technical specification
Incomer: 400 A FP MCCB Isolator-1nos
Busbar 400A TPN AL Busbar, Instruments:4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps, CTs, Protection Relays ,Surge protection device Type 1+2 as per SLD . Outgoing 200 A TP MCCB ISO- 2Nos, 63 A TP MCCB ISO - 4 Nos, 25 A DP MCB- 2 Nos
VFD Starter for 75 kW motor with ON/OFF push button and indicators with Auxiliary and power contactors-1 nos. Fully Automatic Star-Delta starter suitable for 11 kW motor with ON/OFF push button with and indicators with Auxiliary and power contactors-1 nos. Fully Automatic Star-Delta starter suitable for 5.5 kW motor with ON/OFF push button with and indicators with Auxiliary and power contactors-1 nos. Space provision for fixing 3 phase VFD with on/off push button, auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets suitable for 75 kW motor - 1no. Space provision for fixing 3 phase star-delta starter with on/off push button, auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets suitable for 15 kW motor - 2no. Diesel Engine Control - 1No. , Each Diesel engine control consisting of: 25A DP C curve control MCB, 25A On/off control switch - 2 No. , Auto / manual selector switch, 3 attempt starting device, push button etc., All required timers, relays, fuses and accessories for automatic operation of diesel engine. Indication lamp for high water temperature, engine fail to start, engine On indication, high/low lube oil pressure.
Necessary control wiring for start / stop solenoid, line / oil pressure switch, temperature switch, pressure switch to fire pump panel, diesel engine control panel to fire pump panel etc.
Battery Charger suitable for 12 V / 24 V DC with boost and trickle selector switch, 0 -15 V / 0 - 30 V DC volt meter, 0 - 20 A DC Ammeter - 2 No. 6 panel annunciation window for fault indication with hooter, accept & reset push button, separate hooter for Diesel /electrical pump on running condition - 1 No
The system shall include all accessories to control the operation of main electric pump, diesel pump, jockey pump as per the operating sequence for the fire fighting system indicated in the technical specification . The battery charger and all its components should be housed inside the main fire pump panel. The panel shall be painted with approved colour. Annunciator with hooter accept / reset & control wiring. Above panel to be supplied with 2x12 V, 180 AH battery charger and control wiring to provide control power supply in case of power failure. Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification.
1
-
-
... More
CABLES AND CABLING
-
-
-
... More
od178482/2019_2020 : Laying of one no. PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following Above 120 sq. mm and upto 400 sq. mm size in recess/ surface/ cable tray/ wall with saddles, clamps and all other accessories as required
10
-
-
... More
od178483/2019_2020 : Supply of following 3C X 300sq.mm sizes of XLPE insulated PVC sheathed, Aluminium conductor armoured power cable of 11 KV grade conforming to IS 7098 amended upto date.
720
-
-
... More
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm
630
-
-
... More
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm
60
-
-
... More
8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm
2
-
-
... More
10.6.4 : Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm
1
-
-
... More
od178675/2019_2020 : Supply of following 3C 4 Sq mm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
1327
-
-
... More
od178656/2019_2020 : Supply of following 4C 2.5 Sq.mm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
2360
-
-
... More
od67874/2020_2021 : Supply of following 4C 4 Sq.mm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
863
-
-
... More
od178659/2019_2020 : Supply of following 4C 16 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
1539
-
-
... More
od178660/2019_2020 : Supply of following 4C 35 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
1836
-
-
... More
od178661/2019_2020 : Supply of following 3.5C 50 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
74
-
-
... More
od178662/2019_2020 : Supply of following 3.5C 70 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
476
-
-
... More
od178663/2019_2020 : Supply of following 3.5C 120 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
796
-
-
... More
od178671/2019_2020 : Supply of following 3.5C 185 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
150
-
-
... More
od178664/2019_2020 : Supply of following 3.5C 240 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
940
-
-
... More
od178665/2019_2020 : Supply of following 3.5C 400 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
4315
-
-
... More
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
4
-
-
... More
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)
10
-
-
... More
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
12
-
-
... More
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
8
-
-
... More
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)
14
-
-
... More
9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)
34
-
-
... More
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
34
-
-
... More
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
18
-
-
... More
od178699/2019_2020 : Supplying and making end termination with brass compression gland and copper lugs for following 3C 4 Sq mm Cu size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
84
-
-
... More
od178701/2019_2020 : Supplying and making end termination with brass compression gland and copper lugs for following 4C 2.5 Sq.mm Cu size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
156
-
-
... More
od67879/2020_2021 : Supplying and making end termination with brass compression gland and copper lugs for following 4C 4 Sq.mm Cu size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
58
-
-
... More
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
1058
-
-
... More
7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
72
-
-
... More
7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
120
-
-
... More
7.7.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
200
-
-
... More
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
1848
-
-
... More
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
150
-
-
... More
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
898
-
-
... More
7.2.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
3030
-
-
... More
7.2.3 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
350
-
-
... More
7.2.4 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 185 sq. mm and upto 400 sq. mm
4260
-
-
... More
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
340
-
-
... More
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
25
-
-
... More
7.5.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 185 sq. mm and upto 400 sq. mm
140
-
-
... More
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
2501
-
-
... More
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
192
-
-
... More
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
263
-
-
... More
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
190
-
-
... More
7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm
30
-
-
... More
7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 95 sq. mm and upto 185 sq. mm
15
-
-
... More
7.6.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm
10
-
-
... More
14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia
150
-
-
... More
14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required100 mm dia
150
-
-
... More
14.14.1 : Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.100 mm dia
100
-
-
... More
od178741/2019_2020 : Fabrication, supply and installation of following 150 mm WIDTH X 75 mm DEPTH X 2 mm THICK size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
520
-
-
... More
od178742/2019_2020 : Fabrication, supply and installation of following 600 mm WIDTH X 75 mm DEPTH X 2 mm THICK size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
300
-
-
... More
od178743/2019_2020 : Fabrication, supply and installation of following 450 mm WIDTH X 75 mm DEPTH X 2 mm THICK size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
400
-
-
... More
od178744/2019_2020 : Fabrication, supply and installation of following 300 mm WIDTH X 75 mm DEPTH X 2 mm THICK size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
500
-
-
... More
od179106/2019_2020 : Supplying and installing following 150 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.
365
-
-
... More
od179107/2019_2020 : Supplying and installing following 300 mm width X 62.5 mm depth X 2.0 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.
250
-
-
... More
od179133/2019_2020 : Supplying and installing following 450 mm width X 62.5 mm depth X 2.0 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts nuts, etc. as required.
200
-
-
... More
od179135/2019_2020 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
1500
-
-
... More
od179136/2019_2020 : Providing fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.
2.5
-
-
... More
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
40
-
-
... More
10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm
2
-
-
... More
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
4
-
-
... More
od256646/2019_2020 : Providing, laying and fixing following dia RCC pipe NP4 class HEAVY duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (1.2 m deep) and refilling etc as required. 300 mm dia
60
-
-
... More
od68077/2020_2021 : "Supply of 2C 4 Sq.mm Cu 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
302
-
-
... More
od68078/2020_2021 : Supplying and making end termination with brass compression gland and copper lugs for following 2C 4 sqmm Cu size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
14
-
-
... More
7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
55
-
-
... More
7.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm
305
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
-
... More
od67849/2020_2021 : Supply of 4C 25 Sq.mm Al 1.1 KV grade XLPE insulated, FRLS,PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
50
-
-
... More
od181238/2019_2020 : Supply of following 4C 10 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.
84
-
-
... More
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.150 mm dia
10
-
-
... More
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.300 mm dia
10
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 185 sqmm Al
35
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 10 sqmm Al
150
-
-
... More
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
2C 6sqmm Cu
25
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3C 185sqmm Al
2
-
-
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3C 10sqmm Al
8
-
-
... More
Supplying and making end termination with brass double compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2C 6sqmm Cu
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
300mm width X 50 mm depth X 2 mm thickness
20
-
-
... More
WIRING AND ACCESSORIES
-
-
-
... More
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
1907
-
-
... More
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
46
-
-
... More
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
3800
-
-
... More
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
3577
-
-
... More
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
3360
-
-
... More
1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire
230
-
-
... More
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
300
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
11050
-
-
... More
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
150
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
15
-
-
... More
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
90
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
15
-
-
... More
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
90
-
-
... More
1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
67
-
-
... More
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
547
-
-
... More
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
233
-
-
... More
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
106
-
-
... More
1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet
86
-
-
... More
1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
67
-
-
... More
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
847
-
-
... More
od179144/2019_2020 : Supply fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)
122
-
-
... More
od191677/2019_2020 : Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc as required complete.
120
-
-
... More
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
679
-
-
... More
MCBs AND MCB DISTRIBUTION BOARDS
-
-
-
... More
od179231/2019_2020 : Supplying and fixing following 8 Way surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board with cable end box and made of sheet steel, dust protected, duly powder painted, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB with provision of 125/160 amps TP MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) and with suitable cable end box as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
2
-
-
... More
od179232/2019_2020 : Supplying and fixing following 4 Way surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board with cable end box and made of sheet steel, dust protected, duly powder painted, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB with provision of 125/160 amps TP MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) and with suitable cable end box as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4
-
-
... More
od179240/2019_2020 : Supplying and fixing of following 4 way Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
13
-
-
... More
od179241/2019_2020 : Supplying and fixing of following 8 way Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4
-
-
... More
od179249/2019_2020 : Supplying and fixing following 8 way (8 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
17
-
-
... More
od179250/2019_2020 : Supplying and fixing following 4 way (8 + 12), Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
11
-
-
... More
od179257/2019_2020 : Providing and fixing following 125 Amp,16kA,FP MCCB rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
2
-
-
... More
od179258/2019_2020 : Providing and fixing following 160Amp,16kA,FP MCCB rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
2
-
-
... More
od191439/2019_2020 : Providing and fixing following 100Amp,25 kA,FPMCCB rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
2
-
-
... More
od179271/2019_2020 : Supply and fixing of following 4 pole 40 amps. (415 Volts),30mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
6
-
-
... More
od179272/2019_2020 : Supply and fixing of following 4 pole 40 amps. (415 Volts),100mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
15
-
-
... More
od179273/2019_2020 : Supply and fixing of following 4 pole 63 amps. (415 Volts),100mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
15
-
-
... More
od179274/2019_2020 : Supply and fixing of following 4 pole 25 amps. (415 Volts),100mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
5
-
-
... More
od179275/2019_2020 : Supply and fixing of following 4 pole 25 amps. (415 Volts),30mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
7
-
-
... More
od179276/2019_2020 : Supply and fixing of following 2 pole 25 amps. (230 Volts),30mA rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.
7
-
-
... More
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
63
-
-
... More
od179404/2019_2020 : Supplying and fixing 40 amps to 63 amps rating, 240/415 volts, "D curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
5
-
-
... More
od179405/2019_2020 : Supplying and fixing 40 amps to 63 amps rating, 240/415 volts, "D curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
5
-
-
... More
od179406/2019_2020 : Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, "D curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
144
-
-
... More
od179407/2019_2020 : Supplying and fixing 40 A to 63 A rating, 240/415 volts, "C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple Pole
53
-
-
... More
od179418/2019_2020 : Supplying and fixing 40 amps to 63 amps rating, 240/415 volts, "C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Four pole
5
-
-
... More
od179424/2019_2020 : Supply, Installation, Testing Commissioning of 100A FP isolator in weather proof enclosure on surface including all the mounting accessories, internal wiring etc as required complete.
6
-
-
... More
od179425/2019_2020 : Supply, Installation, Testing Commissioning of 63A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. ( Make: Enclosure- Siemens 8GB32100RC0X) or equivalent approved make)
10
-
-
... More
od179426/2019_2020 : Supply, Installation, Testing Commissioning of 40A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. ( Make: Enclosure- Siemens 8GB32100RC0X) or equivalent approved make)
1
-
-
... More
od179427/2019_2020 : Supply, Installation, Testing Commissioning of 32A DP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. ( Make: Enclosure- Siemens 8GB32100RC0X) or equivalent approved make)
17
-
-
... More
od179443/2019_2020 : Supply Installation Testing and Commissioning of stand alone type PIR sensor with day light sensing facility and lux detection range of 5 to 2500 Lux having minimum area of detection of 7m radius at the height of 2.8 meter with an adjustable time delay range – 30sec – 30min. Test mode – 6sec with auto exit programming. The sensor shall be stand alone type and have the provision for wall mounting/ Ceiling mounting facility as per the site requirement. Refer technical specification for more detailes.
5
-
-
... More
od179444/2019_2020 : Supply, Installation, Testing Commissioning of 32A FP isolator in weather proof enclosure on surface including all the mounting accessories, internal wiring etc as required complete. (Make Enclosure:Hensel KV PC 8104 or equivalent approved make)
16
-
-
... More
od179445/2019_2020 : Supply, Installation, Testing Commissioning of 32A FP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete. ( Make: Enclosure- Siemens 8GB32100RC0X) or equivalent approved make)
52
-
-
... More
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
125
-
-
... More
2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
14
-
-
... More
2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
10
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
615
-
-
... More
od68101/2020_2021 : Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB with provision of 125/160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 3 phase 6 Way
1
-
-
... More
od181172/2019_2020 : Supplying and fixing following 12 Way surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board with cable end box and made of sheet steel, dust protected, duly powder painted, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB with provision of 125/160 amps TP MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) and with suitable cable end box as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1
-
-
... More
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
4
-
-
... More
od181270/2019_2020 : Supply, installation commissioning of programmable recess/surface mounted PIR occupancy sensor with in built day light sensor with passive photocell. The sensor shall have adjustable off delay timer, sensitivity level adjustment etc prewired complete with all required accessories. Make: Honeywell K5017 or equivalent approved make
5
-
-
... More
od253865/2019_2020 : Providing and fixing following 100 Amp,16kA,FP MCCB rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
-
-
... More
Supply installation, testing and commissioning of DOL starter for 5HP,3ph motor including auxilliary contactors, 2 kVAR capacitor and all necessary accessories as required complete.
9
-
-
... More
LIGHT FIXTURES AND FANS
-
-
-
... More
od177214/2019_2020 : Installation, testing and commissioning of LED PANEL fittings with chain and copper wiring with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.
287
-
-
... More
od177190/2019_2020 : Installation, testing and commissioning of Wall fan, including all the supports as required etc complete.
3
-
-
... More
od181896/2019_2020 : Supply of decorative wall light LED along with driver,system wattage maximum of 14 Watts,lumen output of lamp greater than 800 lumens, power factor 0.95,rated life of L70 @ 50,000 hours, system efficacy greater than 80lumen/watts,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Klite WALL DENNA SLIMMY or equivalent approved make)
20
-
-
... More
1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
540
-
-
... More
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
2654
-
-
... More
od177191/2019_2020 : Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required.
1431
-
-
... More
od177192/2019_2020 : Supply of 450 mm size wall mounting oscillating type fan having three speed control, oscillation control at bottom and suitable for operation on single phase 230 volt, 50Hz AC supply complete with continuous duty motor, chrome plated front and rear gaurds and all accessories as required complete.(Make: CG HIFLO or equivalent approved make).
3
-
-
... More
od177194/2019_2020 : Supply , installation, testing commisioning of drive over light LED IP65 rated along with driver,system wattage maximum of 3*2W(+/-2W) Watts,lumen output of lamp , power factor 0.95,rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watts,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Klite 4097 SYMMETRICAL or equivalent approved make)
34
-
-
... More
od191758/2019_2020 : Supply of LED surface mounted down light made of die cast aluminium, along with driver,system wattage of maximum 15 Watts, with lumen output of luminaire greater than or equal to 1500 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 100 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: -Crompton -Royal Rimless -S or equivalent approved make
163
-
-
... More
od191499/2019_2020 : Supply , installation, testing commisioning of up down light LED IP65 rated along with driver,system wattage maximum of 8*2 Watts,lumen output of lamp , power factor 0.95,THD 10%rated life of L70 @ 50,000 hours, system efficacy greater than 70lumen/watts,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Klite WALL CYLIN MINI or equivalent approved make)
30
-
-
... More
od177195/2019_2020 : Supply of LED recess mounted down light made of die cast aluminium, along with driver,system maximum wattage of 12 Watts with lumen output of luminaire greater than or equal to 950 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: LT MOON V2 G7 -MV1057RL0X or Wipro IRIS LD71 or Crompton LCDRS-12-CDL
228
-
-
... More
od177196/2019_2020 : Supply of LED recess mounted down light made of die cast aluminium, along with driver,system maximum wattage of 15Watts with lumen output of luminaire greater than or equal to 1400 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: LT MOON V2 G7 -MV1557RL0X or equivalent approved make
323
-
-
... More
od177197/2019_2020 : Supply of LED recess mounted down light made of die cast aluminium, along with driver,system maximum wattage of 18Watts with lumen output of luminaire greater than or equal to 1700 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: LT MOON V2 G7 -MV1857RL0X or equivalent approved make
833
-
-
... More
od68047/2020_2021 : Supply of RECESS TYPE LED CLEAN ROOM fixture with housing made of metallic CRCA powder coated body or pressure die cast Aluminium body with a high efficiency diffuser along with driver,maximum system wattage of 36 Watts,lumen output of luminaire greater than or equal 3500 lumens, power factor = 0.95, THD 10%,rated life of L70 @ 50,000 hours, system efficacy greater than 110 lumen/watt, 5700K ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Crompton Pollux-LCTLRP-36-FO-CDL equivalent approved make.
50
-
-
... More
od68124/2020_2021 : Supply of LED recess mounted down light made of die cast aluminium, IP 65 along with driver,system wattage of maximum 18 Watts, CCT- 4000K with lumen output of luminaire greater than 1500 lumens, power factor 0.95,THD 10% rated life of L70 @ 50,000 hours, system efficacy greater than 100 lumen/watt, and including all necessary accessories as required complete.Make:- Cat No: LT INTENSO PRECISE IP equivalent approved make
10
-
-
... More
od68125/2020_2021 : Supply, installation, testing and commissioning of indoor Architectural LED light fixture as per architects choice with base price of Rs. 2000.
65
-
-
... More
od68126/2020_2021 : Supply of industrial surface mounted weather proof LED Batten with IP 65 rating and totally enclosed housing and high efficiency polycarbonate diffuser,along with driver,maximum system wattage of 40 Watts(including driver),lumen output of luminaire greater than or equal to 4400, power factor 0.95, THD 10%,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 110 lumen/watt and including all the necessary accessories as required complete.Make :Crompton Sheild Neo or Wipro Capsule or equivalent approved make
10
-
-
... More
od68127/2020_2021 : Supply of indoor decorative surface mounted LED Batten with Polycarbonate diffuser, along with driver,system wattage of maximum 18Watts,lumen output of luminaire greater than 2000, power factor 0.95,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: Osram Luxsmart LED batten G2 or equivalent approved make
107
-
-
... More
od68128/2020_2021 : Supply of indoor decorative surface mounted LED Batten with Polycarbonate Diffuser ,along with driver,system wattage of maximum 10 Watts,lumen output of luminaire greater than 1000, power factor 0.95,rated life of L70 @ 25,000 hours, system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete.Make:- Cat No: OSRAM LUXSMART led BATTEN G2 or equivalent approved make
87
-
-
... More
od68129/2020_2021 : Supply of indoor industrial surface mounted LED tube with Batten along with driver , surge protector,,system wattage of maximum 40Watts,lumen output of luminaire greater than 4000 lumen, power factor 0.95, THD 10%,rated life of L70 @ 50,000 hours, system efficacy greater than 100lumen/watt and including all necessary accessories as required complete.Make:- Cat No: WIPRO OPTIMA ll24
128
-
-
... More
od68131/2020_2021 : Supply of recess mounted LED panel light fixture light made of die cast aluminium with corrosion resistance p[owder coating and with proper diffusers, along with driver,system wattage of maximum 36 Watts with lumen output of fixture not less than 3600 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than 100 lumen/watt and including all necessary accessories as required complete.Make:- PHILIPS LCDN-18-CDL or WIPRO CRCO10R038HP57GL1 or equivalent approved make
237
-
-
... More
od68135/2020_2021 : Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(Rate shall inclusive of supply and installation of remote/electronic regulator)
380
-
-
... More
od68171/2020_2021 : Supply of 450mm sweep heavy duty exhaust fan indie cast aluminium with self opening louvers working on 230 V AC supply complete with all accessories as required. (Make: ALMONARD or equivalant approved make)
4
-
-
... More
od68172/2020_2021 : Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Make: Orient Smart Air Exhaust or equivalant approved make)
6
-
-
... More
od68173/2020_2021 : Supply of LED mid bay Lighting luminaire of , pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 55 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 with system lumens greater than 5500 and system efficacy greater than or equal to 95%.Make: LT-E060571D00- ETERNE WG or equivalent approved make
10
-
-
... More
1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
10
-
-
... More
od181173/2019_2020 : Supply, installation testing and commissioning of of LED decorative wall bracket light with 12W LED lamp . Luminaries provided with LED driver as required suitable for operation on 240V, 50Hz single phase ac supply.The fixture shall have IP65 class protection shall be provided with all accessories ( Klite PELICAN PERSILbracket 2070 or equivalent approved make)
15
-
-
... More
od181228/2019_2020 : Supply of LED recess mounted down light made of die cast aluminium, along with driver,system wattage of maximum 24 Watts with lumen output of luminaire greater than or equal 2250 lumens, power factor 0.95, THD 10%, rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt and including all necessary accessories as required complete.Make:- Cat No: LT MOON V2 G7 -MV1857RL0X or equivalent approved make
44
-
-
... More
EXTERNAL LIGHTING
-
-
-
... More
od177236/2019_2020 : Supply, installation testing and commissioning of of LED bollards with not less than 500 mm in height. LED lamp 12+/4W in the fixture. The body shall be powder coated extruded aluminium. Luminaries provided with LED driver suitable for operation on 240V, 50Hz single phase ac supply.The fixture shall have IP65 class protection shall be provided with all accessories and civil foundations.( Wipro LB12-131-XXX-65-08 or Klite Virgio bollard or equivalent approved make)
29
-
-
... More
od181174/2019_2020 : Supply, installation, testing and commissioning of 5m long Hot dipped GI double arm pole painted with PU coat with built- in control box prewired, with double armpole suitable for mounting LED luminairie with lamp , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, provision for mounting RCBO/MCB in the control box as required and all other accessories complete on civil foundation. Along with LED Lamp with die cast Aluminium alloy housing and polycarbonate diffuser, inbuilt driver,system wattage maximum of 30 watts, System efficacy not less than 95 lumen per watt , and lumen output greater than 2900lumen, power factor 0.95, THD 10%, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly.(Pole Make : unique poles UEGP005 or equivalent approved make. Luminairie Make:Wipro Skyline LR02-331-XXX-57-XX or CG freedom+ LSTS-30-CDL or LT Adornis min -SL A03557M000 or equivalent approved make)
46
-
-
... More
od181185/2019_2020 : Supply, installation, testing and commissioning of 5m long Hot dipped GI single arm pole painted with PU coat with built- in control box prewired, with pole suitable for mounting LED luminairie with lamp , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, provision for mounting RCBO/MCB in the control box as required and all other accessories complete on civil foundation. Along with LED Lamp with die cast Aluminium alloy housing and polycarbonate diffuser, inbuilt driver,system wattage maximum of 30watts, System efficacy not less than 95 lumen per watt , and lumen output greater than 2900lumen, power factor 0.95, THD 10%, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly.(Pole Make : unique poles UEGP005 or equivalent approved make. Luminairie Make:Wipro Skyline LR02-331-XXX-57-XX or CG freedom+ LSTS-30-CDL or LT Adornis min -SL A03557M000 or equivalent approved make)
14
-
-
... More
od181195/2019_2020 : Supply ,Installation, testing Commisioning of Outdoor Lighting Panel (ODP) cubicle type, made out of Thermoplastic UV resistant enclosure, totally enclosed, IP65, free standing, pedestal mounted dust and vermin proof, powder coated, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides,including all the necessary internal wiring ,suitable spreader etc. Panel shall be with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. Incomer:40 A, FP, 25kA, MCCB with adjustable thermal magnetic release with OL SC protection - 1 No BUSBAR 40A TPN busbars of high conductivity electrolytic quality copper alloy INSTRUMENTS 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 1 Set Surge protection device-type 1+2-Nos OUTGOINGS timer clock with 25A FP contactor having an astronomical 365 day timer clock with Sunrise/Sunset tracking- 6 Nos 16A C Curve FP RCCB+MCB, 100 mA-6 Nos
1
-
-
... More
EARTHING AND SAFETY EQUIPMENTS
-
-
-
... More
od179488/2019_2020 : Supply providing ISI plate earthing as per IS 3043 with 1200x1200x12.5mm GI / CI earth plate with 50mm dia B class GI pipe for watering, 50x6mm GI strip welded to the plate, GI funnel with weld mesh, fixing GI strip of size 50x6mm with min. length of 20cm clamped with 50x6mm GI flat using 12x10mm GI bolt nut at top of the GI pipe as test joint, filling around the GI pipe at a radius of 15cm with a homogeneous mixture of charcoal, river sand upto a height of 2.5 meter from the bottom, filling the rest of the portion with excavated soil including watering ramming providing brick work (20cm) masonary at top in 1:6 cement mortar, plastering the inside top of the manhole with 12mm thick 1:6 cement mortar and providing gully trap with 450x450x10mm CI covering at the top.
2
-
-
... More
od179489/2019_2020 : Supply and installation of all the materials required for maintenance free earthing system including 3 mtrs length,17.2mm dia or above 250 microns molecularly copper bonded steel rod with stainless steel connectors and fasteners for connecting earth strip, earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound) and providing masonry enclosure with heavy duty CI cover plate of 300X300 mm having locking arrangement.
88
-
-
... More
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
od179493/2019_2020 : Providing and fixing 3.15mm Cu (10 SWG) Cu wire on surface or in recess for connections etc. as required.
6525
-
-
... More
od179494/2019_2020 : Providing and fixing 25mm X 3mm Cu Cu strip on surface or in recess for connections etc. as required.
20
-
-
... More
od179495/2019_2020 : Providing and fixing 25mm X 6mm GI GI strip on surface or in recess for connections etc. as required.
747
-
-
... More
od179496/2019_2020 : Providing and fixing 50mm X 6mm GI GI strip on surface or in recess for connections etc. as required.
240
-
-
... More
od179497/2019_2020 : Supplying and laying 25mm X 3mm Cu strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of nut bolt spring washer spaced at 50mm)
85
-
-
... More
od179498/2019_2020 : Supplying and laying 25mm X 6mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)
910
-
-
... More
od179499/2019_2020 : Supplying and laying 50mm X 6mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)
540
-
-
... More
od179501/2019_2020 : Supplying and laying 3.15mm Cu (10 SWG) Copper wire at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of nut bolt spring washer spaced at 50mm)
690
-
-
... More
od179504/2019_2020 : Supply and fixing single line diagram, schematic diagrams etc. of A0 size on suitable Aluminium sheet including lamination etc. as required complete on wall.
1
-
-
... More
od179505/2019_2020 : Supply and fixing anodised aluminum glass framed shock treatment chart.
4
-
-
... More
od179506/2019_2020 : Supplying of Rubber hand gloves suitable for 11 KV.
4
-
-
... More
od179507/2019_2020 : Supply and fixing of First aid box
4
-
-
... More
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
8
-
-
... More
od179509/2019_2020 : Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
24
-
-
... More
od68117/2020_2021 : Supply and fixing of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2.5 mm for 11kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 11kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound
2
-
-
... More
od68118/2020_2021 : Supply and fixing of of fire retardant/extinguishing electrical insulated synthetic mat of 2m x 1m x 2 mm for 3.3kV grade thick, +/- 10% confirming to BIS: DOC No. ET-02 (5440) meeting requirements of IS:15652:2006 (with upto date amendment), suitable for 3.3kV voltage and having minimum width of 1000mm +/- 20mm and including supply of required quantity of adhensive / compound .
8
-
-
... More
od68178/2020_2021 : Providing and fixing 75X6mm GI strip on surface or in recess for connections etc. as required.
40
-
-
... More
od68179/2020_2021 : Supplying and laying following 75X 6mm GI strip(tinned at the points of contacts) / wire at 0.6m below ground level including excavation and refilling for conductor earth electrode including welding etc as required.
1400
-
-
... More
od181196/2019_2020 : Providing and fixing 8 swg GI wire GI wire on surface or in recess for connections etc. as required.
68
-
-
... More
od181231/2019_2020 : Supplying and laying 8 swg GI wire at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)
1350
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
25mm x 5 mm GI
40
-
-
... More
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
25mm x 5 mm Cu
25
-
-
... More
Supplying and laying following GI or copper strip(tinned at the points of contacts) / wire at 0.6m below ground level including excavation and refilling for conductor earth electrode including welding etc as required. 25mm x 5 mm GI
40
-
-
... More
Supplying and laying following GI or copper strip(tinned at the points of contacts) / wire at 0.6m below ground level including excavation and refilling for conductor earth electrode including welding etc as required. 25mm x 5 mm Cu
20
-
-
... More
LIGHTNING PROTECTION
-
-
-
... More
od179511/2019_2020 : Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x 3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm.
48
-
-
... More
od179512/2019_2020 : Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3
600
-
-
... More
od179513/2019_2020 : Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for parapet wall/terrace with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3
869
-
-
... More
od180078/2019_2020 : Providing and laying hot dipped galvanized steel tape 30 mm X3 mm from earth electrode directly in ground as required.
900
-
-
... More
Supply, Installation ,testing and commissioining of 34HP minimum capacity of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut out, with ODU vibration isolators, suitable for 3 phase, 415 V, 50Hz supply, starter panel, power wiring from starter panel,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with PDI, wattmeter as required along with suitable interconnecting control cabling between IDUs,ODUs and central controlller ,Power wiring with necessary supports , necessary ower/control panel, power/control cabling between isolator and single/multiple outdoor units along with associated accessories, structural supports /RCC/ cement concrete foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for 34HP outdoor units by client )
1
-
-
... More
Supply, Installation ,testing and commissioining of 26HP minimum capacities of Air-cooled VRF (Variable Refrigerant Flow) Outdoor unit with multiple compressors, with variable speed inverter driven compressor as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil separator, with all accessories, and safety devices like thermal protector, pressure relief valve, structural supports, high-low pressure cut out, with ODU vibration isolators, suitable for 3 phase, 415 V, 50Hz supply, starter panel, power wiring from starter panel,central controller, along with associated accessories for controlling entire VRF system along with power consumption monitoring of each individual indoor units with PDI, wattmeter as required along with suitable interconnecting control cabling between IDUs,ODUs and central controlller ,Power wiring with necessary supports , necessary ower/control panel, power/control cabling between isolator and single/multiple outdoor units along with associated accessories, structural supports /RCC/ cement concrete foundation etc. complete in all respects as per the technical specifications.(single feeder power source will be provided for 26HP outdoor units by client )
1
-
-
... More
Supply, Installation , testing and commissioning of ceiling suspended indoor ductable units for VRF system with all standard fittings, outlet volume control dampers, flexible connectors, IDU SS drain pan, as per specifications complete with cordless remotes, power wiring, suitable capacity drive motor, electrical controller, temperature controller with digital display, thermostat, control wiring, complete with necessary vibration isolators, CPVC drain pipe connections with 9mm thick round nitrile rubber insulation finished with 7 mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating, including U-trap along with necessary elbows, fittings etc., power/control cabling from power supply, etc complete in all respects as per the technical specifications.
-
-
-
... More
5.5 TR
2
-
-
... More
4.0 TR
1
-
-
... More
3.0 TR
1
-
-
... More
2.0 TR
1
-
-
... More
Supply, Installation ,testing and commissioning of indoor evaporative units Cassette unit type with cordless remote, of following minimum capacities suitable for operation single phase, 230 V, 50Hz supply, including fixing of room unit, with high lift drain pump, drain connection with U-trap and all necessary fittings, elbows, electrical cabling from power plug, structural supports complete in all respects as per the technical specifications.
-
-
-
... More
Cassette 3.0 TR
2
-
-
... More
Cassette 2.0 TR
7
-
-
... More
Cassette 1.5 TR
1
-
-
... More
Cassette 1.0 TR
7
-
-
... More
Supply,Installation ,testing and commissioning of Gas/ Liquid Copper Piping with nitrile rubber class 'O' insulation of suitable thick round closed cell elastomeric insulation finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating and insulation shall have antimicrobial properties, suction filters for gas line, filter drier & sight glass for liquid line as per specification for each indoor machines & outdoor units including chasing,drilling,concealing and making good the same on walls etc of following specifications as per site conditions and with required pipe fittings and accessories like Bends, Tees, reducers,Y-Joints, supports, clamps, refnets etc.Complete in all respects as per technical specifications.NOTE: The contractor shall ensure that all refrigerant pipe sizes required as per the design of the equipment shall be considered in the line items underneath, even if the refrigerant pipe size is not mentioned in following line items.Both refrigerant suction and liquid line shall be insulated.
-
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/4") 44.45 mm
7
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 5/8") 41.275 mm
80
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 3/8") 34.925
25
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/4") 31.75 mm
7
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1 1/8") 28.575 mm
30
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 7/8") 25.225 mm
115
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/4") 19.05 mm
45
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 5/8") 15.875 mm
120
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/2") 12.7 mm
17
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 3/8") 9.525 mm
160
-
-
... More
Hard Copper Pipe 18Guage with 19mm thick Insulation ( 1/4") 6.35 mm
12
-
-
... More
Supply, Installation ,testing and commissioining of Double skin,sheet metal DX AIR-HANDLING UNIT as per technical specifications complete with outlet volume control dampers, canvas connections, filter section shall be 99% efficiency down to 3 micron MERV 13 filters complying to ASHRAE 52.2 , cooling coil of copper tube and aluminium fin construction, drier, first charge refrigerent gas of R410A/407C, IDU SS drain pan,squirrel cage, TEFC, 3-Ph induction motor, DIDW centrifugal fan, drive package and cushy-foot mounting, all housed inside housing of a double skin construction AHU with vibration isolation arrangement, power wiring and power/control cabling(indoor to outdoor),thermostat wiring, required starter and starter panel , structural supports for fixing IDU, safety devices etc. complete in all respects as required by the technical specifications to meet adequate external static pressure for the following minimum capacity and the cooling coil (min 4 rows), suitable for three phase 440V supply,complete in all respects as per technical specifications.
20TR/8000 CFM (Minimum External Static Pressure 50 mmwc )
1
-
-
... More
Supply, Installation ,testing and commissioining of Air-cooled Outdoor DX-unit with single/multiple compressors as per specifications complete with suitable capacity drive motors, air cooled condenser, R410A/R407C refrigerant, oil seperator, with all accessories, and safety devices like thermal protector, pressure relief valve, high-low pressure cut out, with ODU vibration isolators, squirrel cage, TEFC, 3-Ph induction motor, drive package and cushy-foot mounting, all housed inside a cabin, power wiring and thermostat wiring, structural supports for fixing ODU, safety devices etc. complete in all respects as required by the technical specifications for the following minimum capacity suitable for three phase 440V supply etc complete as required by the standard specifications.
20TR/8000 CFM
1
-
-
... More
Supply of suitable sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation as per specification for 20 TR machine between indoor & each outdoor units (refrigerant pipe b/w indoor and multiple outdoor shall be considered as single circuit) required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, finished with an 8 oz canvas cloth covering adhered between two coats of fungicidal protective coating suitably supported on trays, clamps etc. including chasing,drilling,concealing and making good the same on walls etc as per site conditions etc. complete in all respect complete as required by the standard technical specifications.
5
-
-
... More
Supply, installation, testing and commissioning of DX type 4-way Cassette units of the following capacity with three speed evaporator fan motor, cooling coil and insulated drain pan with factory installed high lift condensate drain pump enclosed in plastic casing complete with cordless remote control and outdoor unit complete with hermetically sealed scroll/rotary compressor, condenser fan and coil enclosed in sheet metal cabinet powder coated,first charge refrigerant gas R410A/R407C, vibration isolator pads, structural supports for fixing IDU/ ODU, suitable as required as per manufacturers recommendation ,suitably sized copper refrigerant piping (upto 5 m )as per relevant ASHRAE Standards (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like Bends, Tees, reducers, supports finished with an 8 oz canvas cloth covering adhered between two coats of fungicidal protective coating,necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 12mm thick closed cell elastomeric insulation as per specification required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, finished with an 8 oz canvas cloth covering adhered between two coats of fungicidal protective coating suitably supported on trays, clamps etc ,with suitable stabilizer ,etc. Units shall be suitable for operation at 230 Volts 50 Hz three phase supply.
-
-
-
... More
1.5 TR
2
-
-
... More
2.0 TR
16
-
-
... More
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping(both suction and liquid piping) beyond 5 mtr including 19mm thick closed cell elastomeric insulation as per specification for 2.0 TR cassette unit between indoor & outdoor units as per site conditions finished with 7mils woven fibre glass cloth covering adhered between two coats of fungicidal protective coating,anti-microbial protection along with factory laminated aluminium foil facing complete in all respect complete as required by the standard technical specifications.
50
-
-
... More
Supply, installation, testing and commissioning of CPVC drain pipe (beyond 5 m )of suitable dia connecting the drain pan of the indoor units with necessary U-traps, elbows, fittings etc. to nearest drain point, with insulated with 9 mm thick closed cell elastomeric class 0 insulation with7 mils factory laminated glass cloth as per specification required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps, suitably supported on trays, clamps etc. complete in all respects as per the technical specifications.
410
-
-
... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
-
-
-
... More
20 G
4
-
-
... More
22 G
153
-
-
... More
24 G
692
-
-
... More
Supplying and fixing of 13 mm thick 55kg/m3 density, regular closed cell class 0 nitrile rubber insulation finished with 7 mils factory laminated glass cloth ,anti-microbial protection. Butt all joints tightly and seal all breaks and joints by adhering glass cloth tape,(on duct ) etc. complete in all respects as required by the technical specifications
377
-
-
... More
Supply & fixing of Acoustic Insulation of AHU Rooms using open cell processed nitrile rubber having a density of 140-180 Kg/m3 and thickness of 15 mm with anti-microbial protection with suitable frame works etc. complete in all respects as required by the technical specifications
163
-
-
... More
Supply and fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1 with antimicrobial properties. ,having density of 140 kg/m3 ,fixing of insulation using manufacturers recommended adhesive, tapes etc. and applications meeting class 0 as per BS 476 Part 6 & 7 and meeting NRC of 0.4 as per ISO 356 and complete in all respects as required by the technical specifications
86
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grilles with aluminium volume control dampers as per technical specifications.
2
-
-
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grilles with louvers but without volume control dampers complete as required by the technical specifications.
2
-
-
... More
Supply, Installation, testing and commissioning of Powder coated extruded aluminimum Supply Air Square Diffusers, 4 way multicone type with aluminium volume control dampers, fixing supports complete in all respects as per the technical specifications.
6
-
-
... More
Supply, Installation, testing and commissioning of Powder coated extruded aluminimum Return Air Square Diffusers 4 way multicone type , fixing supports complete in all respects as per the technical specifications.
15
-
-
... More
Supply, Installation , testing and commissioning of Aluminium Extruded Fresh air louvers with fresh air damper, bird screen etc. complete in all respects as per the technical specifications.
2
-
-
... More
Supply, Installation, testing and commissioning of Aluminium Exhaust Air louvers , dampers, fixing supports complete in all respects as per the technical specifications.
9
-
-
... More
Supply,fixing, testing and balancing of opposed type volume control dampers of 16 gauge GI sheets to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distributions system complete in all respects as per the technical specifications.
12
-
-
... More
Supply, Installation ,testing & commissioning of Fusible link type Fire damper of 16 gauge GI sheets with fire rating of 300 Deg C for 2 hr for air distribution Networks , complete in all respects as per the technical specifications.
7
-
-
... More
Supply, Installation ,testing and commissioning of Under-deck insulation of exposed roof using Class "O" Nitrile rubber insulation of 19mm thickness, anti microbial insulation and stuck to the roof using suitable adhesives, tapes etc. as per the technical specification, manufacturer's recommendation.
220
-
-
... More
Supply, Installation, testing and commissioning of cabinet fans (duct mounted) of the following capacity with suitable blower, 3 phase direct driven motor of following capacity for exhaust, with starter, active carbon filter ,other accessories etc. complete in all respects as required by the standard specifications. External static pressure mentioned is exclusive of static pressure for Carbon filter considered (Location: Toilets, ventilated Rooms ) complete in all respects as required by the technical specifications
-
-
-
... More
1600 CFM - 25 mm of WG
2
-
-
... More
1500 CFM- 25 mm of WG
3
-
-
... More
1100 CFM- 25 mm of WG
2
-
-
... More
700 CFM- 25 mm of WG
13
-
-
... More
600 CFM- 25 mm of WG
1
-
-
... More
400 CFM- 25 mm of WG
1
-
-
... More
300 CFM- 25 mm of WG
8
-
-
... More
Supplying, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification.(a) Horizontal, split casing, centrifugal type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to shall ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 90 m. head conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts,flexible connection expansion bellows on suction & discharge side of the pump etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
1
-
-
... More
Supplying, Installation, Testing and Commissioning of diesel engine driven fire pump suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification(a) Horizontal, split casing, centrifugal type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 90m. head conforming to IS 1520.(b) Suitable HP, 1500/1800 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment,2x12v 180AH Batteries and leads, Diesel Tank Fabricated from MS sheet (Minimum Capacity 300 Litres) with level indicator, By-pass line,MS Piping to diesel tank from engine, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts,flexible connection expansion bellows on suction & discharge side of the pump etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads. (e) DIESEL ENGINE CONTROL-Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode. Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine.
1
-
-
... More
Supplying, Installation, Testing and Commissioning of electric driven pressurisation pump ( Jockey Pump )suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification(a)Vertical in line, centrifugal type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 90 m. head conforming to IS 1520.(b) Suitable HP Squrrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts, flexible connection expansion bellows on suction & discharge side of the pump etc. etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads .
1
-
-
... More
Supply, installation, testing and commissioning of electric driven pump set (terrace pump) suitable for automatic operation and consisting of following: complete in all respect as required and as per the technical specification. Monoblock Pump rated for 900lpm, 40 m head C.I body, bronze impeller,SS shaft with mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation, MS fabricated base plate/ Suitable cement concrete foundation, anti vibration pads etc. as required as per the technical specifications. The cost shall include suitable capacity starter and one isolator near the pump complete with all necessary cabling to provide successful automatic operation of the pump.
2
-
-
... More
Supply, installation, testing and commissioning of pressure gauge (0 - 16 Kg/sq.cm) range, 3/8" BSP bottom entry, 150 mm dial weather proof with stainless steel internals including fittings, ball valves etc. complete as required as per technical specification.
38
-
-
... More
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/10 A resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required as per technical specification.
5
-
-
... More
Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories including pressure gauge etc,and painting with synthetic enamel paint of approved shade as required as per technical specification.
1
-
-
... More
Supply, laying, testing & commissioning of 'C' class heavy duty GI pipe of following sizes and conforming to IS 1239/IS 3589 including JOINING, fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with one coat of primer and two or more coats of synthetic enamel paint of required shade complete as required as per technical specification.
-
-
-
... More
200 mm dia(6.35 mm thickness)
25
-
-
... More
150 mm dia
213
-
-
... More
100 mm dia
1155
-
-
... More
80 mm dia
150
-
-
... More
65 mm dia
363
-
-
... More
50 mm dia
359
-
-
... More
40 mm dia
1296
-
-
... More
32 mm dia
37
-
-
... More
25 mm dia
2297
-
-
... More
Supply, laying, testing & commissioning of 'C' class heavy duty GI pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. in ground at a depth of 1m including Welding, excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating 4 mm thick as per IS 10221, refilling the trench etc. of following sizes complete as required as per technical specification.
-
-
-
... More
150 mm dia
942
-
-
... More
100 mm dia
32
-
-
... More
80 mm dia
15
-
-
... More
Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having PN 16 rating complete with CI body, ductile iron/SS disc, rubber gasket, GI bolts, nuts, washers etc. as required as per technical specification and conforming to API 594.
-
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
4
-
-
... More
65 mm dia
1
-
-
... More
Supplying, fixing, testing & commissioning of double flanged cast iron sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, Gland packing, Rubber gasket, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 14846 of following sizes as required as per technical specification.
-
-
-
... More
200 mm dia
2
-
-
... More
150 mm dia
4
-
-
... More
100 mm dia
1
-
-
... More
80 mm dia
1
-
-
... More
Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating with CI body, SS disc, EPDM/Nitrile rubber seal complete with nuts, bolts, washers, gaskets conforming to IS 13095/API 609, complete as required as per technical specification.
-
-
-
... More
150 mm dia
16
-
-
... More
100 mm dia
35
-
-
... More
80 mm dia
2
-
-
... More
65 mm dia
1
-
-
... More
Supply, installation, testing and commissioning of lever operated full bore forged brass ball valve of following nominal diameter, minimum PN 16 rating, complete with bolts, washers, gaskets and accessories as required complete in all respect as per relevant standards & the technical specification. 40 mm dia
18
-
-
... More
Supply,installation,testing and commissioning of BIS marked gun metal fire hydrant valve ,single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange,valve conforming to IS:5290 complete with blank cap,chain etc as per technical specification.Orifice plates of suitable diameter shall be provided for hydrants where pressure exceeds 7kg/cm2 without any additional cost.
38
-
-
... More
Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as requiredas per technical specification.
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585(b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with suitable dia stop valve (gun metal) & M.S. Pipe & socket.
24
-
-
... More
Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. long BIS marked RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required as per technical specification.
76
-
-
... More
Supply, installation, testing and commissioning of BIS marked 63 mm dia Gun metal branch pipe with 15 mm bore Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per technical specification.
38
-
-
... More
Supply, installation, testing and commissioning of hose cabinets/boxes wall or pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications.Mounting arrangement (on wall for internal hydrants & pedestal mounted for external usage) shall be considered with the item. All Fire Stations/ Cabinets shall be clearly marked ‘FIRE’ with luminous signs.
38
-
-
... More
Supply, installation, testing and commissioning of 4 way Fire brigade inlet connections made of CI Body, 150mm dia. flanged inlet with 4 nos of Gunmetal 63mm male instantaneous inlets conf. to IS: 903, fitted with nonreturn valves, with four PVC blank caps and chains complete as required with all necessary accessories as per the technical specification.
2
-
-
... More
Supply, installation, testing and commissioning of 2 way Fire brigade inlet connections made of CI Body, 100mm dia. flanged inlet with 2 nos of Gunmetal 63mm male instantaneous inlets conf. to IS: 903, fitted with nonreturn valves, with two PVC blank caps and chains complete as required with all necessary accessories as per the technical specification.
1
-
-
... More
Supplying and Fixing of cast iron body Fire brigade draw out connection as per IS‐904 complete with Gunmetal Threaded Inlet and all necessary accessories including foot valve (to be connected to static tank) complete as required and as specified in the technical specification.
1
-
-
... More
Supply, installation, testing and commissioning of Gun metal Air release valve, 25 NB male thereaded inlet, complete with all accessories as required as per the technical specification.
11
-
-
... More
Providing, Installation, testing and commissioning of Y strainer with CI body, 3 mm perforated SS screen, flanged end connection, of following size confirming to relevant standards and complete with gaskets, seal and other accessories as required as per the technical specification.
-
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
1
-
-
... More
80 mm dia
1
-
-
... More
Providing, fixing, testing & commissioning of UL listed,Standard response, standard coverage pendant type sprinkler ;1/2" NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. with rosette plate and other accessories complete as required as per the technical specification.
927
-
-
... More
Providing, fixing, testing & commissioning of UL listed,Standard response, standard coverage upright type sprinkler ;1/2" NPT, K -5.6, Chrome Finish; operating temperature at 68 deg. C. complete as required with necessary accessories as per the technical specification.
1014
-
-
... More
Providing, fixing, testing & commissioning of UL listed,Quick response, extended coverage sprinkler ;3/4" NPT, K-8, Chrome Finish; operating temperature at 68 deg.C, with rosette plate, complete as required as per the technical specification.
1
-
-
... More
Supply, installation, testing and commissioning of UL listed flow switch with SPDT contacts, with fixing accessories suitable for nominal pipe dia meters ranging from 1" to 6". The body of the flow switch shall be water proof with IP55 class protection. There shall be inbuilt settings to adjust the flow rate and alarm retard time. The flow switch should have minimum withstand pressure of 15Kg/cm2 and operating pressure ranging from 3.5kg/cm2 to 10Kg/cm2. complete as required as per the technical specification.
18
-
-
... More
Supply, installation, testing and commissioning of 1m unbraided flexible drop to position the sprinkler head in desired location in suspended ceilings. The unit must be complete with stainless steel flexible drop with nipple, reducer, square bar and brackets etc and other accessories as required as per the technical specification.
770
-
-
... More
Supply, Installation, testing and commissioning of Electromagnetic Flow meter (Digital type) on Test lines & farthest hydrant points to measure 150 % of pump flow and suitable to 80-150mm dia.pipes (flow range 47-3420 lpm) complete with all necessary accessories as required for proper operation as per the technical specification.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 150mm dia Sprinkler alarm valve of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete with all necessary accessories as required for proper functioning as per the technical specification.
6
-
-
... More
Supply and installation of ABC Stored pressure type Fire Extinguisher, 6 Kgs Capacity, Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2018 with ISI mark.
61
-
-
... More
Supply and installation of ISI marked (IS: 15683:2018), 4.5 Kg capacity Carbon-dioxide extinguisher made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose with all accessories in all respects including initial fill with CO2 gas. complete as required as per the technical specification.
10
-
-
... More
Supply and installation of ISI marked Wet chemical K type fire extinguisher of 4 litre capacity for usage in Kitchen. The Extinguisher shall be manufactured as per IS:15683:2018, supplied with Brass forged squeeze lever valve , discharge hose fitted K type nozzle, complete with wall mounting bracket with screw and all the accessories as required and as per the technical specifications.
1
-
-
... More
Supply and installation of ISI marked (IS: 15683:2018) Clean agent type fire extinguisher of 2kg capacity. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket and all the accessories as required and as per the technical specifications.
12
-
-
... More
Supply and installation of ISI marked (IS: 15683:2018) Mechanical foam fire extinguisher of 6L capacity. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket and all the accessories as required as per the technical specifications.
1
-
-
... More
Supply, installation, testing and commissioning of Modular(Cealing mounted) ABC type extinguisher of 5Kg complete as required with all necessary accessories for successful operation as required as per the technical specification.
28
-
-
... More
Supply, installation, testing and commissioning of Addressable type Multi Detector (smoke & thermal) complete with all accessories like base, base box, etc. to be installed under/above false ceiling, roof and concealed space, interconnecting to loop cable, complete as required as per technical specification. The product shall be UL listed & FM Approved.
1068
-
-
... More
Supply, installation, testing and commissioning of addressable type heat detector (rate of rise type) complete with all accessories like base, base box, etc. to be installed under/above false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required as per technical specification. The product shall be UL listed&FM Approved.
6
-
-
... More
Supply, installation, testing and commissioning of Addressable type Manual Call Point-Re-setable type via special key (non-breaking glass type) complete with push button enclosed in box with provision for cable or conduit coupling as required as per technical specification. The product shall be UL listed&FM Approved.
28
-
-
... More
Supply, installation, testing and commissioning of wall sounder cum strobe at different locations complete for both audio and visual indication with all fixing accessories etc. under false ceiling, roof, wall, etc, interconnecting loop cable etc. and complete as required with necessary modules for addressable operation as per the technical specification. The product shall be UL listed/FM Approved.
28
-
-
... More
Supply, installation, testing and commissioning of 24V Power supply unit for hooters with battery backup. The status of the power supply unit must be monitored from the FACP and alarm shall be obtained if the power supply unit fails to operate, complete in all respect with necessary accessories as required as per the technical specification.
10
-
-
... More
Supply, installation, testing and commissioning of fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable, complete in all respect with necessary accessories as required as per the technical specification. The product shall be UL listed & FM Approved.
73
-
-
... More
Supply, installation, testing and commissioning of LED Response indicator for all detectors located above false ceiling, with low profile, white case and shall not exceed 2.5 inches of extension below the finish ceiling, etc and complete in all respect with necessary accessories as required as per the technical specification.
523
-
-
... More
Supply, installation, testing and commissioning of wall mounted talk back unit for duplex communication of fire fighters with all necessary accessories complete as required as per the technical specification.
26
-
-
... More
Supply, installation, testing and commissioning of wall mounted 6W speaker including all necessary accessories complete as required as per the technical specification.
255
-
-
... More
Supply, installation, testing and commissioning of public address and talk back system consisting of 28 zone (expandable) public address cum talkback console with mike and selector, multiple channel talk back master control panel with LCD display,power supply, battery charger, battery housing,suitable watt PA & mic, multiple channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 1000W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the successful operation of the system.
1
-
-
... More
Supply, installation, testing and commissioning of UL listed & FM approved microprocessor based 10 looped, intelligent addressable main fire alarm panel, central processing unit with the loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 150 detectors per loop and loop length up to 2 km, LCD display with touch screen or other keypad and events history log in the non-volatile memory (EPROM), power supply unit (230 ± 5% V, 50 Hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches whenever any Alarm is triggered. The panel shall have facility to integrate with analog/digital voice evacuation system (PA-talkback system) and shall be complete with all necessary accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as required as per the technical specification.
a) Programming software for the system
b) Automatic system test activates
c) Detector sensitivity adjustments
d) Alarm verification
e) Alpha/numerical display
f) Provision to connect to PCs and external printers
1
-
-
... More
Supply, installation, testing and commissioning of intelligent addressable Input module for monitoring purpose and send the signal from a flow switch to the alarm panel for initiating alarm when flow occur,complete with all necessary accessories as required as per the technical specification. The product shall be UL listed&FM Approved.
18
-
-
... More
Supply, installation, testing and commissioning of addressable control module to automatically trigger on/off devices like jet fans, AHUs, extract air fans etc in case of fire. The product shall be provided with all necessary accessories as required as per the technical specification. The product shall be UL listed&FM Approved.
20
-
-
... More
Supply, installation, testing and commissioning of Repeater Panel for Fire Alarm System with piezo sounder, LCD alpha numeric character display with accept / reset buttons for alarm address of any sensor / field device, battery (for at least 24 hours of continuous normal operation), battery charger and automatic change over facility from mains to battery,complete with all necessary accessories as required as per the technical specification. The Repeater Panel shall only provide field device address with room number. Analogue Output is not required. The Panel shall be connected to the Fire Alarm Panel. The product shall be UL listed&FM Approved.
1
-
-
... More
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above/below ground or on surface/in recess as required and as directed by the engineer in charge.
32703
-
-
... More
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. and complete as required as per the technical specification.
179
-
-
... More
Supply, installation, testing and commissioning of CO2/Clean agent linear heat detection system using trace tubes for panel flooding of electrical panels(the main distribution MV electrical panel) consisting of gas cylinders with weight calculated on the basis of volume of single largest compartment within the panel. UL listed trace tube of required design length, a cylinder of required capacity, also consisting of master control unit with digital display, load cell, discharge hooter/flashers, pressure gauges, pressure switches for low pressure/discharge indications & interlocks with fire alarm system of the premises & all accessories for complete functionality of system, complete as required as per the technical specification.
2
-
-
... More
Supply and installation of photoluminescent glow signage such as Fire Duct/Fire Lift/Hose reel/FireStaircase/No smoking etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
55
-
-
... More
Supply and installation of photoluminescent glow signage for "FIRE ASSEMBLY POINT" of standard size (500*200 MM minimum) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
5
-
-
... More
Supply and installation of photoluminescent glow signage containing standard instructions to the occupants in case of Fire emergency (FIRE ORDER), of standard size (600*800 MM minimum) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification
27
-
-
... More
Supply and installation of photoluminescent glow signage such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.
63
-
-
... More
Supply and fixing (in appropriate location) of Fire Emergency Evacuation Plan (Color) printed in photo paper of Size A2 sand-witched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification and conforming to IS 9457, IS 12349, IS 12407 .Evacuation Plan shall be prepared by the contractor and got approved from Client/Consultant.
27
-
-
... More
Design, fabrication, supply, installation, testing, commissioning of electric traction type with machine roomless type, Stainless steel 23Pax (1600Kg) Hospital elevator with car size of 1400mm (width) X 2400mm (depth) (minimum) (including freight & landing charges ,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V ± 10%, 3 phase , 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec ,electromagnetic brake system, simplex/duplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, audio announcement along with prerecorded message as approved by Engineer-in-Charge, all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device. The traction motor of machine roomless elevator shall be of gearless type and placed inside the elevator hoistway complete as per technical specification. Having automatic centre/side opening SS door, stainless steel car enclosure provided with stainless steel handrails on two sides, granite flooring as applicable in accordance of following details:-3 stops & 3 openings and entrance & exit at same side and suitable for travel height of 8.4mtrs. (Shaft Size 2500mm (width) x 3200mm (depth) ) with door opening of 1300mm (width) and 2100mm (height). The equipment should be BMS compatible. All electrical components with wiring from the single point power supply provided in last landing near the elevator door. All fabrication and procedures shall confirm to relevant IS standards.
5
-
-
... More
Design, fabrication, supply, installation, testing, commissioning of electric traction type with machine roomless type , Stainless steel 4 Pax (272 Kg) Passenger elevator with car size of 900mm (width) X 850mm (depth) (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc.) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to Purcahsers's EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories,braille buttons,audio announcement along with prerecorded message as approved by Engineer-in-Charge.The traction motor of machine roomless elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening stainless steel doors, stainless steel car enclosure provided with stainless steel handrails on two sides, granite flooring as applicable in accordance of following details:-2 stops & 2 openings and entrance & exit at same side and suitable for travel height of 3.6mtrs. (Shaft Size 1600mm (width) x 1550mm (depth) ) with door opening of 700mm (width) and 2100 mm (height) . The equipment should be BMS compatible.All electrical components with wiring from the single point power supply provided in last landing near the elevator door .All fabrication and procedures shall confirm to relevant IS standards.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements