KITCO Limited Tender

Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8" BSP bottom entry,6" dial weather proof with stainless steel internals including fittings etc. complete as required as per technical specification.

Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required with necessary control cablings & wirings for successful system operation as per technical specification.

Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 including Welding, fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two or more coats of synthetic enamel paint of required shade complete as required as per the technical specification.

100 mm dia

80 mm dia

Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239, including drop forged fittings like elbows, tees flanges,reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards, in ground at minimum depth of 1 m, including Welding, excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating minimum 4 mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required as per the technical specification.

100 mm dia

80 mm dia

Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having PN 16 pressure rating complete with CI body, ductile iron disc, SS plates vulcanized NBR seal flanged end, GI bolts, nuts, washers etc. as required as per technical specification and confirming to API 594.

100 mm dia

Supply, installation, testing and commissioning of ISI marked butterfly valve of following sizes having PN 16 rating conforming to IS 13095 complete with CI body, EPDM liner,SS disc nitrile sheet,O -ring, flanges, bolts, nuts, washers etc. as required as per technical specification.

100 mm dia

Supply,installation,testing and commissioning of gun metal fire hydrant valve,single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange,ISI marked and conforming to IS:5290 (Type -A) complete with cast iron wheel, blank cap,Chain etc as required as per the technical specification.

Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required as per technical specification. (a) 30 m. long 20 mm (nominal internal dia) water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 (b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe and socket.

Supply, installation, testing and commissioning of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. ISI marked and conforming to IS 636 (type-A) as required as per the technical specification.

Supply, installation, testing and commissioning of 63 mm dia Gun metal short branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle ISI marked and conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required as per technical specification.

Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per the technical specifications. It shall be inscribed with the word: ‘"FIRE HOSE CABINET’" of letter size 75 mm in height and 12 mm in width.

Supply, installation, testing and commissioning of 2 way Fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 100 mm dia MS/GI pipe connection conforming to IS 904 with 100 mm flanged out let connection and built in check valves complete as required as per technical specification.

Supply, installation, testing and commissioning of Air release valve, 25 mm dia complete as required as per the technical specification.

PORTABLE FIRE EXTINGUISHERS Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683 (latest) with ISI mark.

Supply and installation of Carbon-dioxide extinguisher of ISI marked (IS 15683 latest) 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas. complete as required as per the technical specification.

FIRE ALARM SYSTEM Supply, installation, testing and commissioning of Addressable type Manual Call Point Re-setable type via special key (non-breaking glass type) complete with push button, enclosed in box with provision for cable or conduit coupling complete as required as per the technical specification.The product shall be FM approved or UL listed.

Supply, installation, testing and commissioning of wall sounder cum strobe at different locations complete for both audio and visual indication with all fixing accessories, etc. under false ceiling, roof, wall, etc, interconnecting loop cable complete as required as per the technical specification. The product shall be FM approved or UL listed.

Supply, installation, testing and commissioning of addressable type (or conventional with addressable module) 24v Power supply unit for hooters with battery backup. The status of the power supply unit must be monitored from the FACP and alarm shall be obtained if the power supply unit fails to operate, complete in all respect and as required as per technical specification. The product shall be UL listed/FM Approved.

Supply, installation, testing and commissioning of fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable complete as required as per technical specification. The product shall be FM approved or UL listed.

Supply, installation, testing and commissioning of wall mounted talk back unit for two way communication of fire fighters including all necessary accessories complete as required as per the technical specification.

Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required as per the technical specification.

Supply, installation, testing and commissioning of public address and talk back system consisting of multiple zone public address (each floor taken as a zone) cum talkback console with mike and selector, multiple channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA & mic, multiple channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary components & accessories as required for the successful operation of the system.

Supply, Installation, Testing & Commissioning of FM approved/ UL listed intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km complete as required as per the technical specifications. Single looped panel, including battery backup. It shall be microprocessor based with its own micro controller, memory, communication module and fire device loop interface cards for indicating devices and should also be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches when ever any Alarm is triggered. The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit,etc complete in all respects. The Panel shall also have Logic hardware and software built into it for time delay operation of hooter and others as follows :(a) programming software for the system (b) automatic system test activates (c) detector sensitivity adjustments (d) alarm verification(e) Alpha/numerical display (f) provision to connect to PCs and external printers

Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above/below ground/in recess as required as per technical specification

Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends, couplers, junction box, fastners, iron staples/saddles/screws, in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required as per the technical specification.

SIGNAGE Supply and installation of photoluminescent glow signage such as Fire Duct/Fire Lift/Staircase signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.

Supply and installation of photoluminescent glow signage for "FIRE ASSEMBLY POINT" of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.

Supply and installation of photoluminescent glow signage for "FIRE ORDER" of standard size (500*800 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.

Supply and installation of photoluminescent glow signage such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel and conforming to IS 9457, IS12349, IS12407. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required as per the technical specification.

Supply and fixing (in appropriate location) of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification and conforming to IS 9457, IS12349, IS12407. Evacuation Plan shall be prepared by the contractor.