KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
KITCO Limited - KITCO Tender
Coronavirus COVID 19
Eprocure
Opening Date14 Aug 2018
Closing Date10 Sep 2018
Tender Amount₹ 9,87,74,641
Costs
EMD
₹ 2,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_KITCO_228612_1Bid Award Id
ViewTender No
DSYA/KITCO/CL/20/2018Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
1825.6
-
-
2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia
593
-
-
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
377.7
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
6905.14
-
-
2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth
13
-
-
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
10
-
-
15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
135.83
-
-
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6.1
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
421.57
-
-
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
178.11
-
-
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
160050.33
-
-
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
178.26
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
1958.58
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
2330.2
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
962.64
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
1545.01
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
1027.82
-
-
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
1621.75
-
-
5.9.13 : Centering and shuttering including strutting, etc. and removal of form for:Vertical and horizontal fins individually for forming box louvers band, facias and eaves boards
60.2
-
-
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
735.94
-
-
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
158.02
-
-
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
46.11
-
-
5.18.2 : Providing precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete excluding plastering of the jambs, sills and soffits.40 mm thick
7.59
-
-
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
143.1
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete at all levels. Thermo - Mechanically Treated bars of grade Fe-500D or more
172265.11
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge.All work upto plinth level
964.67
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. .All work above plinth level upto floor V level
465.77
-
-
5.34.1 : Extra for providing richer mixes at all floor levels.Providing M-30 grade concrete instead of M-25 grade BMC/RMC.
323.69
-
-
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
375.26
-
-
50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
439.83
-
-
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
55.83
-
-
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
501.14
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
147.81
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
909.57
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
908.38
-
-
21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
16.38
-
-
21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
17.28
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
111.38
-
-
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
14
-
-
od15441/2018_2019 : Providing and fixing glazing with 12mm toughened glass in existing aluminium frame work with EPDM rubber / neoprene gasket<br>etc. complete as per the architectural drawings and the directions of Engineer-in-charge
21.38
-
-
21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
7.2
-
-
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
0.45
-
-
9.5.1.1 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters
2.88
-
-
9.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood
4.32
-
-
9.12 : Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters to be added to the item 1.4 ( Area of opening for glass panes excluding portion inside rebate shall be measured).
7.43
-
-
9.21.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative Type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
12.96
-
-
9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to windows by welding
311.63
-
-
9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
72
-
-
9.75.2 : Providing and fixing bright finished door latch with necessary screws etc. complete:250x16x5 mm
6
-
-
9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
38
-
-
9.97.2 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
72
-
-
9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm
327
-
-
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
38
-
-
9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.
36
-
-
50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop
22
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
156.9
-
-
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
49.68
-
-
9.156.1 : Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587.
19.68
-
-
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
23.2
-
-
10.7 : Providing and fixing ball bearing for rolling shutters.
4
-
-
10.8.1 : Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area
16
-
-
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
16
-
-
10.25.2 : Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2209.2
-
-
od21944/2018_2019 : Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
4350
-
-
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
436.08
-
-
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
248.39
-
-
23.1.1.1 : Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.All types of soil300 mm dia
30
-
-
23.3.2 : Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.150 mm nominal size dia
20
-
-
23.4.2 : Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer - in-charge150 mm nominal size dia
20
-
-
23.8 : Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine /medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in- charge.
0.35
-
-
23.12 : Development of tube well in accordance with IS: 2800 (Part I) and IS : 1189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc.by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer - in-charge.
5
-
-
23.13.2 : Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia
2
-
-
23.14.2 : Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 ( part I), including ecessary bolts & nuts of required size complete.150 mm clamp
2
-
-
23.15.2 : Providing and fixing Bail plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (part I).150 mm dia
2
-
-
od15442/2018_2019 : Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge at all levels.
381.18
-
-
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
58.82
-
-
11.6.1 : Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
6.79
-
-
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
548.89
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
462.54
-
-
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
56.36
-
-
11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick
788.25
-
-
11.27 : Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
77.72
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut granite for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
12.55
-
-
8.3.2 : Providing edge moulding to 18 mm thick marble/granite stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work
13.92
-
-
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
29
-
-
8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
8.16
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
2919.16
-
-
13.2.1 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)
4957.75
-
-
13.8.2 : 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)
161.98
-
-
13.10 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
4946.53
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
2016.25
-
-
13.42 : Distempering with 1st quality acrylic distemper (ready mixed) of approvedmanufacturer, of required shade and colour complete, as per manufacturer's specification.
69.83
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
4806.43
-
-
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
4703.39
-
-
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
3605.16
-
-
13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
43174.9
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
1285.83
-
-
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
58.43
-
-
13.50.4 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
133.03
-
-
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
133.03
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1024
-
-
15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)
135.24
-
-
15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
107.55
-
-
15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
247.5
-
-
15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
50
-
-
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
192.81
-
-
16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
4673.5
-
-
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
810
-
-
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1340
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
196.64
-
-
16.91.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.
1289
-
-
16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25
200
-
-
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
257.8
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
22
-
-
17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
-
-
17.34.1 : Providing and fixing toilet paper holder:C.P. brass
22
-
-
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
30
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
30
-
-
18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes
228
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
96
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
72
-
-
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
30
-
-
18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes
30
-
-
18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes
60
-
-
18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes
260
-
-
18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes
248
-
-
18.12.7 : Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore
100
-
-
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
6
-
-
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
4
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
8
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
8
-
-
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
8
-
-
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
4
-
-
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal
4
-
-
18.19.5.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal
3
-
-
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
-
19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
-
-
19.18.2 : Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kg
3
-
-
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
4
-
-
od15443/2018_2019 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
1033
-
-
od15444/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)
1651.68
-
-
od23256/2018_2019 : Providing and fixing S.S fan clamp of 16mm dia in RCC slabs, beams including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels.
36
-
-
19.19.1.3 : Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Circular shape 450 mm internal diameter
4
-
-
19.15.2 : Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20 mm diameter round bar
32
-
-
50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
45
-
-
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
159.59
-
-
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
20.25
-
-
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
12
-
-
50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
12
-
-
Providing and fixing CP brass hand spray with lever control (health faucet) of approved make 1meter long flexible tube and wall hook,CP brass angle valve and all fittings etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels
22
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
54
-
-
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
54
-
-
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
84
-
-
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
74
-
-
50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2
22
-
-
50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
20
-
-
50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
150
-
-
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
58
-
-
50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
8
-
-
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
16
-
-
od16018/2018_2019 : Supply & Fixing of cricket practice nylon net made with high quality material onto existing framework as per the directions of engineer-in-charge. Rate inclusive of all materials, fittings required labour and transportation
175.5
-
-
od22248/2018_2019 : Demolishing brick work/ laterite work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
197.38
-
-
od16075/2018_2019 : Soling with soling stone of size 150 to 75 mm brokenstone and blinding materials, including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading blinding material in 12mm thick layers and sweeping the same to fill the voids,watering profusely and consolidating with hand rammer/ plate vibrator etc complete as per the direction of Engineer-in - Charge.
168.57
-
-
od16733/2018_2019 : Structural steel work welded in single sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge at all levels.
15536.43
-
-
od21912/2018_2019 : Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, bending, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
4230.5
-
-
od15809/2018_2019 : Supplying, laying and jointing perforated HDPE pipe PE 80 of size 110 mm dia 10 kg/cm2 with 5 mm dia perforations, minimum 125 perforations per running metre, in trenches of size 35cm x 45cm at required slope, disposal of excavated earth, as per specifications etc complete including the cost of all materials, labour etc. and as directed by the Engineer-in-charge.Care should be taken while laying so that the perforations will be along the bottom of the pipe. The rate to include cost of all materials, labour charges, lead, lift etc complete.
931
-
-
od15810/2018_2019 : Providing and laying of 20mm downgraded metal (Coarse rubble granite Stone) of approved quality as filter media around the drainage pipes in the sides of trench as per the directions of Engineer-in-charge. Rate inclusive of all materials,transportation and labour charges complete.
137.79
-
-
od15811/2018_2019 : Providing and laying of compacted fill with 10mm to downgraded metal (Coarse rubblegranite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
231.43
-
-
od15812/2018_2019 : Providing and laying of compacted fill with 20mm to downgraded metal (Coarse rubblegranite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
277.49
-
-
od15813/2018_2019 : Providing and laying of compacted fill with 40mm metal (Coarse Rubble Granite Stone)combined with a downgraded stone up to 30mm to form a contour and elevations to the desired level as perDrawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to becompleted as per detailed specifications and or as approved by Engineer-in-charge
369.61
-
-
od15814/2018_2019 : Supply and Installation of a pair of Football goal post of superior quality with nets as per FIFA specifications.
1
-
-
od15815/2018_2019 : Providing and installing root zone, over graded and rolled subgrade include necessary trimming to form the required camber and gradients with layers of course graded medium, fine graded sand to a minimum thickness of 50mm and providing sand manure mix layer consisting of medium fine sand of U.S.G.A specification, biofibre and biosoil @10kg/sq.mtr to a minimum thickness of 150mm. Mixing the above to ensure a homogenous mix and accurate mix of components. The sand manure mix shall be compacted repeatedly by rolling to the grade & camber required and irrigating as required. The cost shall include applying pre mergence herbicide, pre plant fertilizers @10kg/sq.m to the entire area, cost of all labour, material lead etc complete as directed by the Engineer in charge.
4606
-
-
od15816/2018_2019 : Supplying and Planting grass over the red earth and sand bed closely to get a thick grass lawn suitable for ground in rows of 5cm apart in both direction, keep the area moisture by spraying and sprinkling water till the grass gets sufficient deep roots cutting to level the top surface, trimming and dressing etc. complete as directed by the Engineer-in-Charge. Bermuda Grass
4606
-
-
od15817/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for extrenal works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. HDPE pipe 40 mm-6 kg/cm2
144
-
-
od15818/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for external works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge.;HDPE pipe 50 mm-6 kg/cm2
180
-
-
od15819/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for external works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. HDPE pipe 63mm-6 kg/cm2;
355
-
-
od15820/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete as per direction of Engineer in charge -for exposed works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. HDPE pipe 90 mm-6 kg/cm2
200
-
-
od16696/2018_2019 : Extra for carrying available good earth by Mechanical Transport including loading, Unloading and stacking over an additional lead upto 1 km for the purpose of filling, as per the directions of engineer-in-charge
198
-
-
od16096/2018_2019 : Providing and fixing of 65 mm diameter GI C class pipe threaded (IS 1239 heavy class) as borewell discharge pipe line complete with GI fittings, flanges, clamps and all accessories as required inside borewell/tubewell.
30
-
-
od16097/2018_2019 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels.40mm dia
4
-
-
od16098/2018_2019 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 50mm dia
2
-
-
od16099/2018_2019 : Supplying and fixing submerssible bore well pump, with CI construction, CI impellercomplete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and workingwith 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials, labour charges etccomplete as directed by the Engineer in charge at all levelsCapacity : 8m3/hr, Head : 110m
1
-
-
od16544/2018_2019 : Supplying and fixing of submerssible pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels.Capacity : 8m3/hr .Head : 30 m
2
-
-
od16080/2018_2019 : Providing and fixing 110mm dia PVC perforated pipes in filter media complete as directed by the Engineer-in-Charge. The rate including cost and conveyance of all materials, labour and fixing charges, etc.
10
-
-
od15935/2018_2019 : Supply and Installation of sand stone 18mm thick and 300mm wide for edge finishes including cost and conveyance of all material, labour, approved adhesive etc complete and as directed by the Engineer-in-charge
22.5
-
-
od15936/2018_2019 : Providing and laying ceramic mosaic tiles of size 48x48 x4mm or nearest size, including cost and conveyance of all materials, labour, glue, adhesive , water proof grout etc complete of approved make and colour as as directed by Engineer-in-charge
410
-
-
od16527/2018_2019 : Providing and fixing coloured vitreous china counter top round wash basin 470 mm or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve, etc. complete as directed by the Engineer-in-charge.
11
-
-
Providing & fixing star white vitreous china flat back urinal with urinal flush valve (automatic pressing), of
approved size with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. The cost shall include cost of flush valve, necessary CP flush pipe, CP drain, spreader and all required connections.
22
-
-
od16529/2018_2019 : Supplying and fixing approved quality white vitreous china urinal division plate 700 x 340 including cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge.
20
-
-
od16530/2018_2019 : Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing.
11.65
-
-
od16531/2018_2019 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
35
-
-
od16532/2018_2019 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer-in-Charge& 75mm OD (4 kg/cm2)
39
-
-
od16533/2018_2019 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer-in-Charge &75mm OD (6 kg/cm2)
42
-
-
od16534/2018_2019 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer-in-Charge&110mm OD(6 kg/cm2)
352
-
-
od16535/2018_2019 : Providing and fixing 15 mm dia CP Brass single hole mixer of approved quality and make as directed by the Engineer- in- charge
25
-
-
od16536/2018_2019 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 200 mm dia 6 Kgf/cm2
250
-
-
od16537/2018_2019 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 250 mm dia 6 Kgf/cm2
150
-
-
od16539/2018_2019 : Providing and fixing Chlorinated Polyvinyl chloride(CPVC) SDR 11 pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipes with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per the direction of Engineer-in-Charge.(Concealed work including cutting chases and making good the walls etc)&;40mm nominal dia
30
-
-
od16540/2018_2019 : Supplying approved make PVC gully trap of size 160x110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size (inside) the weight of cover to be not less than 4.5kg and frame to be not less than 2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm, 115 thick brick wall in CM 1:6 on a foundation of PCC 1:4:8. 100mm thick plastering inside with CM 1:3, 12mm thick with a neat cement flushing coat and conveying to site, cleaning, installing and testing approved make PVC gully trap with 160mm outlet (fabricated), surrounding with CC 1:1.5:3, 150x150mmm, top with CI grating above the PVC gully trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in-Charge.
8
-
-
od16541/2018_2019 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including<br>collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2;(1 cement : 2 fine sand) including testing of joints etc. complete.150 mm dia RCC pipes.
50
-
-
od16542/2018_2019 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone<br>aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 60 x 60 cm and 100 cm deep including C.I. cover 500 mm with frame (medium duty) : With bricks.Class designation 75
12
-
-
od16543/2018_2019 : Providing and fixing C.I. grating 150x150 mm as directed by the Engineer-in-charge
30
-
-
od16631/2018_2019 : Providing and fixing water heater of approved MOC, quality, make of storage capacity 25 litres of approved quality and make including cost and conveyance of all materials labour charges ,lead, lift,cutting and making good the walls,slabs,floors wherever required as per direction of Engineer-Incharge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced persons shall be employed for this purpose.
2
-
-
od16656/2018_2019 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge.100mm Dia
2
-
-
od16657/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge. : 100 mm
2
-
-
od16658/2018_2019 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges, making good the walls etc complete as directed by the Engineer-in-Charge.80mm Dia
2
-
-
od16659/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge.80mm Dia
2
-
-
od16660/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge.;65mm Dia
2
-
-
ELECTRICAL WORKS
Design,Supply, installation, testing and commissioning of outdoor duty (IP 54)
pedestal mounted type weatherproof ,double door type KSEB metering panel ,
suitable for accomodating KSEB energy meter ( supply of energy meter is under
KSEB scope) and consisting of 3 nos. of 125A HRC Fuse base with HRC fuses,
3 nos of 75/5A CTs Class 0.5 CT (or as per KSEB) ,3 nos of 2A SP MCB ,inter
connections , providing necessary supports made from the same gauge CRCA
sheet to fix energy meters, etc . and to be fabricated out of 16 SWG MS sheet with
locable door having glass window, sealing facility for KSEB, top cover and
necessary overhang, undergone seven tank process ,powder coated finish and all
mounting accessories as required complete with civil foundation.The panel shall be
with all accessories as per specification.
1
-
-
MSB
Supply, installation, testing &commissioning of totally enclosed free standing floor
mounting dust & vermin proof indoor cubicle type IP42 panel board suitable for
415V, 3 phase, 50Hz supply with provision for fixing incoming & outgoing switches
fabricated using 2 mm MS sheet powder coated with necessary cable alley & bus bar
chamber for all switches. The panel shall be with all accessories as per drawing &
specification. (Refer particular specification).
Incomer
125 A FP Moulded Case Circuit Breaker with thermal release and neutral link (Ics
=100%Icu= 25KA).- 1nos.
Din type HRC fuse unit, neutral link etc. -
1No.
4A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
(0-500)V voltmeter, Acc. class 1 with 90
deg defl. scale - 1 no.
(0-100)A ammeter Acc. class 1 with 90
deg defl. scale - 3 nos
6A 3 pole voltmeter selector switch - 1 no.
125/5A 5VA class 1 resin cast CT - 1 set
The panel shall be provided 1set 200/5A,
10VA, class 1, CT for APFC relay for capacitor panel
125A TPN busbar chamber with
Aluminium busbar.
Outgoing
40 A FP Moulded Case Circuit Breaker with thermal release and neutral link (Ics
=100%Icu= 25KA).- 5nos.
1
-
-
Outdoor Lighting Panel (ODP)
Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel
(ODP) cubicle type, totally enclosed, IP 54, free standing, floor mounting, dust and
vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply
with provision for fixing incoming & outgoing switches fabricated using 2 mm CRCA
sheet powder coated, including internal wiring with suitable size wires/cable,
interconnection, duly powder coated painting etc., The panel shall be fabricated from
a firm having CPRI certification with test certificates for similar panel (required for
short circuit rating, temperature rise and IP classification) including following
switchgears accessories for the LT Panel
INCOMER
Surge Arrestor Type 1+2 Combination- 1 Set
40 A, FP, 100mA RCBO - 1 No
BUSBARS
40 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy - 1 Set
INSTRUMENTS
4A, C curve SP MCB - 3 Nos.
RYB indication lamp, LED type - 1 Set
Voltage Surge Protector-1 Nos
24 hrs Digital time switch with inbuilt battery - 8 Nos.
25A, AC-1 contactor -8 Nos
OUTGOINGS
16 A, FP RCCB (100mA)-8Nos
16 A C Curve FP MCB-8 Nos
1
-
-
WIRING AND ACCESSORIES Wiring for light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc. as required.
134
-
-
Wiring for twin control light point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, 2 way modular switch, modular
plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC
insulated copper conductor single core cable etc. as required.
6
-
-
Wiring for circuit/ submain wiring
alongwith earth wire with 2 X 1.5 sq. mm
+ 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required
750
-
-
Wiring for circuit/ submain wiring
alongwith earth wire with 2 X 2.5 sq. mm
+ 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required
1500
-
-
Wiring for circuit/ submain wiring
alongwith earth wire with 2 X 4 sq. mm +
1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed medium class PVC conduit as required
150
-
-
Supplying and fixing following modular
switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required.
5/6 amps switch and socket
25
-
-
Supplying and fixing following modular
switch/ socket on the existing modular plate
& switch box including connections but excluding modular plate etc. as required. 15/16 amp switch and socket
2
-
-
Supplying and fixing 3 Module (100mm X
75mm), GI box alongwith modular base & cover plate for modular switches in
recess etc as required.
2
-
-
Supplying and fixing 3 Module Modular
base & cover plate on existing modular metal boxes etc. as required.
2
-
-
Supplying and fixing 6 Module (200mm X
75mm), GI box alongwith modular base & cover plate for modular switches in
recess etc as required.
25
-
-
Supplying and fixing 6 Module Modular
base & cover plate on existing modular metal boxes etc. as required.
25
-
-
Supplying and fixing stepped type
electronic fan regulator on the existing modular plate switch box including connections
but excluding modular plate etc. as required.
24
-
-
LIGHT FIXTURES AND FANS Supply of pre-wired,18W LED T5 Batten
fitting complete with all accessories and tube etc. including connection with 1.5 sq.
mm FRLS PVC insulated, copper conductor, single core cable and earthing
etc. as required
72
-
-
Supply of 1x10W decorative surface wall
mounting slim flurescent type fixtures suitable for 10W T5 lamp including
electronic ballast prewired complete as required
22
-
-
Supply of LED down light made of die cast aluminium, along with driver,system
wattage maximum of 12 Watts, power factor 0.9,rated life of L70 @ 40,000
hours, system efficacy not less than 50 lumen/watt and including all necessary
accessories as
required complete.
40
-
-
installation, testing and commissioning of
prewired flourescent/ CFL/ LED fitting of all types complete with all accessories
and fluorescent lamps of all types directly on wall and giving connections with
16/0.20 mm 3 core PVC insulated and sheatherd round copper conductor flex
wire or extending the original wiring and giving connections as required.
134
-
-
UNDERWATER LIGHTS
Supplying to Site and fixing in position Underwater 7w/12v LED wall hung light
12
-
-
JUNCTION BOXES
Supplying to Site and fixing in position, Junction Box : In ABS with 3 entries of 3/4" or
PG-16 coupling
Make: ASTRAL (Spain) / Equivalent
12
-
-
TRANSFORMERS
Supplying to Site and fixing in position, Step-down Transformer : 300 VA / 220V - 12V
2
-
-
TRANFORMER PROTECTION BOX
Supplying to Site and fixing in position transformer protection box
2
-
-
Supply of Ventilair DXW-Neo (250mm) Exhaust Fan suitable for operation on
single phase 230V ,50Hz AC supply complete with all accessories as required
complete.(Make crompton,Havells, Philips or equivalent approved make)
14
-
-
Installation of exhaust fan in the existing
opening, including making good the damage, connection, testing, commissioning etc.
as required.
14
-
-
Supply, conveyance, installation,testing and
commissioning of ceiling fan,using standard accessories excluding speed regulators
suitable for 230 V/240 V 50 HZ, AC supply wiring the down rod with 16/0.20mm
PVC insulated and PVC sheathed 650/1100 v grade 3 core round copper
conductor flex wire or with extended original wiring etc. as required. confirms to IS
374/1979 as required complete.
24
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
24
-
-
Supply, installation, testing and commissioning of LED Flood light luminaire of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 250 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens not less than 4500 and system efficiency greater than or equal to 110 lumens/Watts or above @ PF ≥ 0.95.The Light fitting shall be with all required accessories suitable for mounting in (48-60)mm OD pole arm. The luminaire should meet all the technical specifications as mentioned. (Make: Make: LT T25057F0X0 or equivalent approved make)
36
-
-
Supply installation, testing and commissioning of surface mounting, mini mast pole of 12 meter height single arm bracket suitable for mounting 6 nos of 250w flood Light fixtures. The hot dip GI pole with polyurethene coating shall be provided with foundation base plate and the bracket assembly shall be secured on to the pole top . The swaged pole with bracket,built-in cylindrical GI control box of same material with service door coated with epoxy zinc phosphate primer and finished with polyurethane based paint. The control gear box is prewired with DP MCB, FP connector for easy loop-in loop-out suitable for 3phase 4 wire ACsupply.The pole shall have provision for connecting the earth wire. (As per attached drawing)
6
-
-
Supply, installation, testing and commissioning of LED Flood light luminaire of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 200 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens not less than 4500 and system efficiency greater than or equal to 110 lumens/Watts or above @ PF ≥ 0.95.The Light fitting shall be with all required accessories suitable for mounting in (48-60)mm OD pole arm. The luminaire should meet all the technical specifications as mentioned. (Make: Make: LT T20057F0X0 or equivalent approved make
12
-
-
Supply installation, testing and commissioning of Mini mast pole of 9 meter height single arm bracket suitable for mounting 3 nos of 200w flood Light fixtures. The hot dip GI pole with polyurethene coating shall be provided with foundation base plate and the bracket assembly shall be secured on to the pole top . The swaged pole with bracket,built-in cylindrical GI control box of same material with service door coated with epoxy zinc phosphate primer and finished with polyurethane based paint. The control gear box is prewired with DP MCB, FP connector for easy loop-in loop-out suitable for 3phase 4 wire AC supply.The pole shall have provision for connecting the earth wire. (As per attached drawing)
4
-
-
DB's AND ACCESSORIES Supplying and fixing of 6 ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1
-
-
Supplying and fixing 8 way (4 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
-
-
Supplying and fixing 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2
-
-
Supply and fixing of 4 pole 40 amps. (415 Volts), 100mA sensitivity residual current circuit breaker with MCB having earth leakage and overload protection (RCBO) as per specification as required
8
-
-
Supplying and fixing 5 amps to 32 amps rating,single pole, 240/415 volts, "C"
curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required.
60
-
-
Supplying and fixing 25 amps rating,Triple pole, 240/415 volts, "C" curve, miniature
circuit breaker suitable for inductive load of following poles in the existing MCB
DB complete with connections, testing and commissioning etc. as required.
4
-
-
Supply installation, testing and commissioning of DOL starter upto 3HP,3ph motor
including auxilliary contactors, 1kVAR capacitor and all necessary accessories as
required complete
2
-
-
CABLES & CABLING
Supply of 3.5C 120 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
30
-
-
Supply of 4C 25 Sq.mm Al 1.1 KV grade
XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable
conforming to IS 7098 (Part 1) amended upto date.
230
-
-
Providing and fixing 10 SWG dia copper
on surface or in recess for loop earthing along with existing cable as required.
53
-
-
Supply of 4C 16 Sq.mm Al 1.1 KV grade
XLPE insulated, PVC sheathed, rmoured Aluminium /copper conductor cable
200
-
-
Supply of 4C 10 Sq.mm Al 1.1 KV grade
XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable
100
-
-
Supply of 4C 4 Sq.mm Al 1.1 KV grade
XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable
2000
-
-
Supplying and making end termination with brass compression gland and aluminium/Copper lugs for 4C 25 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
4
-
-
Supplying and making end termination with brass compression gland and aluminium/Copper lugs for 3.5C 120 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as
required.
2
-
-
Supplying and making end termination with
brass compression gland and aluminium/Copper lugs for 4C16 Sq.mm Al XLPE
insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as
required.
6
-
-
Supplying and making end termination with brass compression gland and aluminium/Copper lugs for 4C 4 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
12
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV
grade of upto 35 sqmm size direct in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as required.
2200
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 95 & upto 185 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
15
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of upto 35 size on wall surface as required.
275
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of above 95 & upto 185 size on wall surface as required.
20
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sqmm size in the existing RCC/ HUME/ METAL pipe as required.
50
-
-
EARTHING AND ACCESSORIES
Earthing with C.I. earth plate 1.2 meter * 1.2 meter, 12.5 mm thick including all
accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required.
4
-
-
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm 25mm X 6mm GI
50
-
-
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as
required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt &
spring washer spaced at 50mm
3.15mm Cu (10 SWG)
2000
-
-
FIRE FIGHTING SYSTEM
Supply, installation, testing and commissioning of electric driven pump set (terrace pump) and consisting of following: complete in all respect as required and as per the technical specification.
Monoblock Pump rated for 900lpm, 40m head C.I body, bronze impeller,SS shaft with
mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation.M.S. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. The cost shall include suitbale capacity DOL starter and one isolator near the pump complete with all necessary cabling to provide successful operation of the
pump.
2
-
-
Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range,
3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube and ball
valve including fittings, etc. complete in all respect as required as per the technical
specifications
2
-
-
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4"
BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element,
SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A
resistive 250V DC suit with ball valve etc. complete as required as per the technical
specifications
2
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589
and 1239 including all drop forged fittings and accessories like elbows, tees, flanges, tapers,
reducers etc. conforming to IS standards complete including painting, welding, jointing and
neoprene gaskets, nuts, bolts etc as required. The pipe shall be painted with one coat of primer &
two coats of post office red enamel paint. The pipe shall fixed on the wall,ceiling,truss etc for all
heights with suitable hangers/supports and fasteners etc including cutting the walls/means etc
and making good the same complete as required,complete in all respect as required as per the
technical specifications.
100 mm dia
186
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589
and 1239 including all drop forged fittings and accessories like elbows, tees, flanges, tapers,
reducers etc. conforming to IS standards complete including painting, welding, jointing and
neoprene gaskets, nuts, bolts etc as required. The pipe shall be painted with one coat of primer &
two coats of post office red enamel paint. The pipe shall fixed on the wall,ceiling,truss etc for all
heights with suitable hangers/supports and fasteners etc including cutting the walls/means etc
and making good the same complete as required,complete in all respect as required as per the
technical specifications.
80 mm dia
64
-
-
Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 including drop forged fittings like elbows, tees flanges,reducers, tapers, nuts bolts, gaskets etc. conforming to IS standards in ground at minimum depth of 1 m, including excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating
minimum 4 mm thickness as per IS10221, refilling the trench etc. of following sizes complete in
all respect as required as per the technical specifications. 100 mm dia
113
-
-
Supply, installation, testing and commissioning of dual plate non-return valve of following sizes conforming to IS : 5312 complete with CI body, rubber gasket, GI bolts, nuts, washers etc.
complete in all respect as required as per the technical specifications.
100 mm dia
4
-
-
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron body, Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes complete in all respect as required as per the technical specifications. 100 mm dia
10
-
-
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron body, Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets,forming to IS 13095, of following sizes complete in all respect as required as per the technical specifications.
80 mm dia
3
-
-
Supply,installation,testing and commissioning of gun metal fire hydrant valve ,single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet
side with flange suitable for 80 mm pipe flange,valve conforming to IS:5290 complete with blank cap,Chain etc.complete in all respect as required as per the technical specifications.
10
-
-
Supplying and fixing First-aid Hose Reel with MS construction spray painted in Post office Red,
conforming to IS 884 with up to date amendments, complete with the following as required as
per the technical specifications..
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-
2 as per IS: 12585
(b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe
10
-
-
Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female
Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A)
complete in all respect as required as per the technical specifications
20
-
-
Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling complete in all respect as required as per the technical specifications
10
-
-
Supply, installation, testing and ommissioning of hose boxes wall/pedestal type of size 750 x250x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications
10
-
-
Supply, installation, testing and commissioning of Fire brigade collective breaching with 2 nos of 100 mm flanged out let connection and built in check valves complete as required
2
-
-
Supply, installation, testing and commissioning of Air release valve 25 mm dia.complete in allrespect as required as per the technical specifications.
4
-
-
PORTABLE FIRE EXTINGUISHERS Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono
Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting
ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The
Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing
lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher
should be manufactured strictly as per IS: 15683:2006 with ISI mark,complete in all respect as
required as per the technical specifications
10
-
-
Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of
high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one
meter long braided high pressure discharge hose complete in all respects including initial fill
with CO2 gas,complete in all respect as required as per the technical specifications.
1
-
-
FIRE ALARM SYSTEM Supply, installation, testing and commissioning of Conventional type Manual Call Point Resettable type via Special Key interconnecting to loop cable, complete in all respect as per
technical specification
9
-
-
Supply, installation, testing and commissioning of conventional type Hooter with a minimum sound level of 80db at 10ft distance,interconnecting to loop cable complete in all respect as per
technical specification.
9
-
-
Supply, Installation, Testing & Commissioning of Fire Alarm Control Panel. Conventional Type 4 zone manual operated Fire Alarm Panel including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module etc.The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit, etc complete in all respect as per technical specification. The item shall include 24 Volts sealed lead acid battery sufficient for 24 hrs back up with battery charger.
2
-
-
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper
clamping, supports and terminations appropriately above ground, on walls and ceilings etc.
complete as required as per the technical specifications.
675
-
-
Supply and laying of 25mm dia PVC conduit along with accessories like PVC
bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including
cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as
required as per the technical specifications..
47
-
-
Supply, installation, testing and commissioning of public address and talk back system consisting of multiple zone public address cum talkback console with mike and selector. 6
channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA & mic, 6 channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity
battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.
2
-
-
Supply, installation, testing and commissioning of wall mounted talk back unit including all necessary accessories complete in all respect as required as per the technical specifications..
8
-
-
Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete in all respect as required as per the technical specifications
8
-
-
SIGNAGE Supply and installation of glow signage (photoluminescent)of "3M" Make such as Fire Duct/Fire Lift/Staircase signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed
on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc.,complete in all respect as required as per the technical specifications
14
-
-
Supply and installation of glow signage (photoluminescent)of "3M" Make FIRE ASSEMBLY
POINT of standard size (500*200 MM) as per conventional design/ colour code on 3 mm
thick aluminium composite panel. The signage will be either fixed on the wall with the help
of screws & double tape or hanged from the false ceiling with the help of chain & screws
etc.,complete in all respect as required as per the technical specifications.
2
-
-
Supply and installation of glow signage (photoluminescent)of "3M" Make "FIRE ORDER" of standard size (500*800 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws
etc.,complete in all respect as required as per the technical specifications.
6
-
-
Supply and installation of glow signage (photoluminescent)of "3M" Make such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc.,complete in all respect as required as per the technical specifications
8
-
-
Supply and fixing of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size
A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as
required as per the technical specifications.
6
-
-
Swimming Pool MEP Filters
Supplying to Site and installing in position TOTALLY ANTI-CORROSIVE Bobbin Wound filter, 1600mm diameter. Fitted with pressure gauge panel manual air bleeder, water drain and emptying plug ith flanged connections of required size and required filter media fitted with collector arms and diffuser made from unplasticized PVC and polypropelene. Filtration velocity 40m³/hr/m². Max. working pressure : 2.5 kg/cm². Flow rate = 80m³/hr. Outlet: Ø110 Work to be executed as per the directions of the Engineer-in-charge.Filter shall be tested at 2.5 times suction pressure
2
-
-
Valve Battery
Supplying to Site and installing in position Valve Battery Manifold made in PVC with flanges for connecting to filters as per DIN 2501 standards. Consists of set of 5 - buttterfly valves for carrying out filtration, back-washing, rinsing and shut down of the filters. Size : 140mm Work to be executed as per the directions of the Engineer-in-charge
2
-
-
Valve Battery Supports
Supplying to Site and installing in position Valve battery supports made in Zinc Plated Steel.Height : 1.85mWork to be executed as per the directions of the Engineer-in-charge.
4
-
-
Support Brackets
Supplying to Site and installing in position 2 Support Brackets with anti-vortex clamps and fixing screws For Ø 110 mm pipe Work to be executed as per the directions of the Engineer-in-charge
4
-
-
Re-circulating Pumps
Supplying to Site and installing in position Cast Iron Pumps 3000 r.p.m. Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI-420 shaft. With stainless steel AISI-316 strainer basket. Conn. PN-16 according to DIN2501. Flowrate : 100m3/h @ 12m.head. 7.5 HP Voltage 400V/ 3 ph. (2 working and 1 standby). Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge
3
-
-
CHEMICAL DOSING SYSTEM FOR POOL ACID AND CHLORINE 6
Dosing Pumps
Supplying to Site and fixing in position, Membrane Dosing Pumps Electronic dosing pump to be mounted both on its base as well as hung on the wall. Pumps following CE regulations. IP- 65 protection. Power connections : 220/240V, 50/60 Hz. The materials in contact with liquid are : Ploypropylene, Viton, Teflon and PVC. Includes anti-acid plastic case. Operating panel protection provided by a transparent polycarbonate cover. Lubrication not required. Flow 20l/hr @ 5 barRate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
Chemical Storage Tanks
Supplying to Site and installing in position Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacity of tank 500lts. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
Agitators
Supplying to Site and installing in position, Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC, length of stirring rod 900mm. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
POOL BASIN EQUIPMENT
Pool Drains
Supplying to Site and installing in position Drain grills in SS 304. 300mm x 300mmFlow: 43m3/hrRate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
Suction Inlet Vacuum Point
Supplying to Site and installing in position Suction inlet in ABS with cap internal thread of 1 1/2" dia and external thread 2". Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge
2
-
-
PVC wall conduits
Supplying & Laying of PVC wall conduits 300 mm long. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
Inlets
Supplying to Site and installing in position White ABS plastic bottom inlet for concrete with S.S. screws and regulable flow. Max. Flow/ inlet = 9,000l/hr. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge
18
-
-
Overflow Gutter Drains
Supplying to Site and installing in position Overflow gutter drain fitting with body and grille in ABS and screws S.S. Connection 2" dia. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
24
-
-
Ladders
Supplying to Site and installing stainless steel AISI-304 ladders,width: 500mm, handrails dia 43mm stainless steel non-slip steps, provided with electrical earthing connection and anchoring fixtures. No. of treads - 3. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
2
-
-
GRATINGS
Overflow Gratings
Supplying and fixing overflow gratngs Made in white, U.V. Stabilized PP. Running Length :80 m. Width: 335 mm, Height : 35mm. Price / unit. 1m=45 units. Make: Astral, Code: 00223
3750
-
-
Grating Support Profile
Supplying and fixing Grating Support Profile Made in plastic. Suitable for 22, 24 and 35mm high grating Supplied in 2 m length.Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge
80
-
-
Corner Tiles. 35mmx245mm
Supplying and fixing L shaped ABS grating tiles for drain corners. Rate inclsuive of all material,transportation and labour charges. Work to be executed as per the directionsof the Engineer-in-charge.
4
-
-
Flexible Cable Conduits
Supplying and laying Cable Conduit Hose, Flexible 1 mt. long conduit for conn. light to junction box. 3/4" and PG-16 threaded ends
10
-
-
Supplying and fixing of the following control and regulatory valves including all necessary fittings:
Ball Valve dia 50 mm (filling line) of UPVC make
3
-
-
Butterfly Valve Dia 110 mm (Pump Suct & Del-6, Drain-3) of UPVC make
9
-
-
Flange and Adaptor for 110 mm of UPVC make.
18
-
-
Butterfly Valve dia 140 mm (Inlet- 2) of UPVC make.
2
-
-
Flange and Adaptor for 140 mm of UPVC make.
4
-
-
Ball Valve Dia 63 mm (Suction Inlet-1) of UPVC make.
1
-
-
Butterfly Valve Dia 160 mm (BT Suction-2) of UPVC make.
2
-
-
Flange and Adaptor for 160 mm of UPVC make.
4
-
-
Wafer Check Valve Dia 110 mm (Pump Del-3) of UPVC make.
3
-
-
Flange and Adaptor for 110 mm of UPVC make.
6
-
-
Wafer Check Valve Dia 160 mm (BT Suction-2) of UPVC make.
2
-
-
Flange and Adaptor for 160 mm of UPVC make.
4
-
-
MAINTENANCE ACCESSORIES
Supplying and installing Metallic vaccum head in polished Aluminum and chrome bronze 1.5" length 442mm or nearest.
1
-
-
Supplying to Site and fixing in position Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops.10.0mts. Long with Handle adaptor
1
-
-
Supplying to Site and fixing in position plastic vacuum hose 11/2" dia, of approved colour 30mtrs long including hose cuffs for connection to suction inlets
1
-
-
Supplying to Site and fixing in position Deep bag net made in polypropelene and white polyester netting.
1
-
-
Supplying to Site and fixing in position Surface net made in polypropelene and white polyester netting .
1
-
-
Supplying to Site and fixing in position Curved brushes made in polypropelene for pool basins and scum liners.
1
-
-
Supplying to Site and fixing in position Straight brushes made in polypropelene for pool basins and scum liners.
1
-
-
Supplying to Site and fixing in position Algae brushes with stainless steel bristles
1
-
-
Supplying to Site and fixing in position Test kit for free chlorine & pH
2
-
-
Supplying to Site and fixing in position the following Chemicals:
DPD Tablets .
1
-
-
Phenol Red Tablets .
1
-
-
Chlorine Granuels - 50Kg.
100
-
-
Flocculant.
18
-
-
Algaecide.
24
-
-
pH Plus.
6
-
-
pH Minus.
8
-
-
STARTING BLOCKS
Supplying to Site and fixing in position Starting Blocks with Adjustable platform and seqence number for competition pools. Blocks of size 500mm x 500mm with height : 700mm, to be finished in polyester and fibreglass with non-slip finish.Rate inclsuive of all material,transportation and fixing and labour charges
4
-
-
PODIUM
Supplying to Site and fixing in position the podium made in SS 316, properly anchored in concrete. Work to be executed as per the directionsof the Engineer-in-charge.
4
-
-
FLOAT LINES
Supplying to Site and fixing in position UPVC anti wave Float lines supplied with floats and nylon rope Length : 25m
5
-
-
Supplying to Site and fixing in position Float Line anchors made in S.S.-316
10
-
-
Supplying to Site and fixing in position Float Line Flange anchoring Socket made in S.S.-316
10
-
-
Supplying to Site and fixing in position Lane rope hook in SS 304
5
-
-
SAFETY ACCESSORIES
Supplying to Site and fixing in position Life Buoys with SSsupport to be fixed on the swimming pool deck to be usedin emergencies.
2
-
-
Supplying to Site and fixing in position Lifeguard Loop of SS make
1
-
-
LIFEGUARD CHAIRS
Supply 7 fixing of lifeguard chairs, Made in Stainless Steel AISI-304. With dismountable base plate. Steps, Platform, chair, including parasol holder made of polypropylene fibre-glass. Wheeled base for life guard chair
1
-
-
ALLIED EQUIPMENT
Supply and laying of PVC Pipes and fittings of following sizes:
50mm dia-6 kg/cm2 comprising of bends, tees, tail piece, nut bolts flanged wherever required etc. complete
12
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
63 mm dia- 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
120
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
110 mm 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
60
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
140 mm dia- 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
156
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
160 mm dia- 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
12
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
200mm dia- 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
114
-
-
Supply and laying of PVC Pipes and fittings of following sizes:
250mm dia- 6 kg/cm2 comprisingof bends, tees, tail piece, nut bolts flanged whereverrequired etc. complete
12
-
-
Supply & laying of Cables: 4.0 sq.mm 3 Core as per the directions of the engineer in charge
550
-
-
Supply and installation of manully operated Control Panel for the recirculation pump 7.5 HP
1
-
-
Supply and filling of Filter Media sand inside the filters as per the directions of the engineer-in-charge.
4200
-
-
TESTING AND COMMISSIONING
Supplying and filling water in the pool for testing and commissioning including the cost of water, conveyance etc., including startup chemicals. complete as per the directions of Site-in Charge.
1
-
-
SPRINKLERS & ACCESSORIES
Supply,Fixing & Commissoning of Pop up sprinkler full/part circle having radius of throw 15m - 23m & flow of 0.09 - 0.61 ltr./sec.at an operative pressure of 2.5 - 4.5 kg/cm.sq. , The sprinkler is gear driven rotary type with slip clutch mechanism and heavy duty retract spring. memory arc , non strippable and brass reinforced nozzle turret ,left right both side arc adjustment,Memory arc technology,part and fullcircle in same sprinkler .The sprinkler shall have multi-function, pressure-activated wiper seal for low pressure opreation a The sprinkler shall have internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
24
-
-
Supply,Fixing & Commissoning of Sod Cup Kit allows users to grow turf on the cap of the rotors. This allows for a nearly invisible installation for applications such as sportsfields. The rugged construction of the Cup Kit provides maximum durability while maintaining maximum player safety.Integral pull up slot. Easy arc adjustment after installation through inner cup. Drain holes to promote healthy turf growth. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all aterials,fittings,labour,transportation complete. engineering plastic
24
-
-
Supply,Fixing & Commissoning of 1" Pop up Connecting Swing joint Assembly. The tubing shall be made of UPVC ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. The fittings shall be made of UV resistant thermo plastic. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in charge. Rate inclusive of all materials,fittings,labour,transportation complete.
24
-
-
Supply,Fixing & Commissoning of HDPE service saddle of varying size with pressure rating of PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in charge. Rate inclusive of all materials,fittings,labour,transportation complete.
24
-
-
VALVES & ACCESSORIES
Supply,Fixing & Commissoning of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, non mechanical ,with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
6
-
-
Supply,Fixing & Commissoning of a double acting 1/2 " Air release valve, made of HDPE or higher grade material. The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
4
-
-
Supply,Fixing & Commissoning of 12" Rectangular Valve Box made of HDPE or higher grade material, with green lid and corrugated structure with unique shovel access slot and bolt hole knockout. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
6
-
-
Supply,Fixing & Commissoning of 6" Round box of HDPE or higher grade material, with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
6
-
-
Supply,Fixing & Commissoning of 1.5 inch quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
3
-
-
Supply,Fixing & Commissoning of brass key threads into top of quick coupling valve to provide water access. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
3
-
-
FILTRATION UNIT
Supply,Fixing & Commissoning of 3" Disc Filter made of HDPE having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working presure of 12 Bars. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
1
-
-
PUMPING UNIT
Supply,Fixing & Commissoning of Monobloc or openwell submercible pumpset of having discharge and head of design flow .
Duty of Pump : 6.50 lps / Each Pump
Pressure Head Range = 55 - 60 Mtr
No. of Pumps : 1 Working + 0 Standby/.Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL starter, start / stop push buttons , Ammeter , Single phase preventor, Voltmeter , Indicating lamps , MCB , Dry level guard sensor with control cable, etc. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Suction ,Delivery & Header Pipes of size suitable for the pump flow ( ASTM sch 40/80 or PVC 10Kg/cm2). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of CI control Valve, Butterfly Valve in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 2" gun metal Non Return Valve PN 10 with all accessories to prevent back flow. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of PVC Pressure release valve 2" with all accessories . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Cast Iron Paddle Wheel Water Meter Metal Flanged of pressure rating 10 Bar with all accessories . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
AUTOMATION EQUIPMENT
Supply,Fixing & Commissoning of 14 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto -55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strenth 1400PSI for two way communication betwee nsolenoid valvel and decoders complete .Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
580
-
-
Supply,Fixing & Commissoning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory for 100years,10KV surge protectionwith removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,wityh contract default programe s,slow closing valve removable battery with sensor terminals Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 3" Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0,7 to 10 bar and maximum flow of 10 to 100 m3/h ,max water temp. upto 60°C with 24 VAC - 50 Hz,coil resistance 30ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4bar and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30 ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
7
-
-
Supply,Fixing & Commissoning of Pressure Regulating Module (Dial) to Maintain constant outlet pressure between 1.04 to6.9 bar. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete
7
-
-
Supply,Fixing & Commissoning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant , fits wire from 22 ga to 6 ga as per specifications complete . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete
21
-
-
Supply,Fixing & Commissoning of moisture sensing device ,to measure soil temp,EC ,Moisture level complete to convert as smart controller,with corrossion resistant sensor and setting thershhold moisture level . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of ASTM automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved complete . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Pump relay 24 AC PLA relay ,stabiliser 300watts. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements