KITCO Limited Tender

od56798/2019_2020 : Supplying, Installation, Testing and Commissioning of electric driven pressurisation pump ( Jockey Pump )suitable for automatic operation and consisting of following: complete in all respect as required as per technical specification(a)Horizontal type, centrifugal, pump of cast iron body bronze impeller with stainless steel shaft, mechanical sealing and flow of 180 lpm at 60 m. head conforming to IS 1520.(b) Suitable HP Squrrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration pads .

od56800/2019_2020 : Supply, installation, testing and commissioning of electric driven pump set (terrace pump) suitable for automatic operation and consisting of following: complete in all respect as required and as per the technical specification. Monoblock Pump rated for 450lpm, 40 m head C.I body, bronze impeller,SS shaft with mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation.M.S. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. The cost shall include suitbale capacity starter and one isolator near the pump complete with all necessary cabling to provide successful automatic operation of the pump.

od56587/2019_2020 : Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8 BSP bottom entry, 6 dial weather proof with stainless steel internals including fittings, etc. complete as required asper technical specification.

od56590/2019_2020 : Supply, installation, testing and commissioning of industrial type pressure switch having 1/4 BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SPDT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required with necessary control cablings wirings for successful system operation as per technical specification.

od56809/2019_2020 : Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm diaGun metal wheel valve, with required accessories, and painting with synthetic enamel paint of approvedshade as required as per technical specification

od56695/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification.200 mm dia

od56697/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling withsuitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification.150 mm dia

od56594/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification.100 mm dia

od56596/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling withsuitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification.80 mm dia

od56700/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification.65 mm dia

od56705/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required as per technical specification25 mm dia

od56710/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. in ground at a depth of 1m including excavation providing cement concrete blocks as supports, anti-corrosive wrapping coating 4 mm thick as per IS10221, refilling the trench etc. of following sizes complete as required as per technical specification. 150 mm dia

od56601/2019_2020 : Supply, laying, testing commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 includingfittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. in ground at a depth of 1m includingexcavation providing cement concrete blocks as supports, anticorrosive wrapping coating 4 mm thick asper IS10221, refilling the trench etc. of following sizes complete as required as per technical specification100mm dia

od56823/2019_2020 : Supply, laying, testing commissioning of C class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. in ground at a depth of 1m including excavation providing cement concrete blocks as supports, anticorrosive wrapping coating 4 mm thick as per IS10221, refilling the trench etc. of following sizes complete as required as per technical specification80 mm dia

od56714/2019_2020 : Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having PN 16 rating confroming to API 594 complete with CI body, rubber gasket, flanges, bolts, nuts, washers etc. as required as per technical specification 150 mm dia

od56604/2019_2020 : Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having PN 16 rating conforming to API 594 complete with CI body, rubber gasket, flanges, bolts, nuts, washers etc. as required as per technical specification100 mm dia

od56716/2019_2020 : Supply, installation, testing and commissioning of dual plate non-return valve of following sizes having PN 16 rating conforming to API 594 complete with CI body, rubber gasket, flanges, bolts, nuts, washers etc. as required as per technical specification65 mm dia

od56717/2019_2020 : Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating complete with CI body, nitrile rubber sheet, flanges, bolts, nuts, washers etc. as required as per technical specification200 mm dia

od56719/2019_2020 : Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating complete with CI body, nitrile rubber sheet, flanges, bolts, nuts, washers etc. as required as per technical specification150 mm dia

od56605/2019_2020 : Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating complete with CI body, nirtrile rubber sheet, flanges, bolts, nuts, washers etc. as required as per technical specification100 mm dia

od56606/2019_2020 : Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating complete with CI body, nitrile rubber sheet, flanges, bolts, nuts, washers etc. as required as per technical specification 80 mm dia

od56720/2019_2020 : Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 ratingcomplete with CI body, nitrile rubber sheet, flanges, bolts, nuts, washers etc. as required as per technicalspecification 65 mm dia

od56607/2019_2020 : Supply,installation,testing and commissioning of gun metal fire hydrant valve ,single head oblique type with 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to IS:5290 complete with blank cap,Chain etc as per technical specification

od56608/2019_2020 : Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required as per technical specification(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585(b) 20 mm (nominal internal ) dia gun metal globe valve nozzle.(c) Drum and brackets for fixing the equipment's on wall.(d) Connections from riser with 40 mm dia stop valve (gun metal) M.S. Pipe

od56609/2019_2020 : Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required as per technical specification

od56610/2019_2020 : Supply, installation, testing and commissioning of 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

od56611/2019_2020 : Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications.

od56612/2019_2020 : Supply, installation, testing and commissioning of Fire brigade collective breaching with 4 nos. of 150 mm flanged out let connection and built in check valves complete as required as per technical specification

od56613/2019_2020 : Supply, installation, testing and commissioning of Air release valve,25mm dia, complete as requred as per the technical specification.

od56727/2019_2020 : Providing, Installation, testing and commissioning of Y strainer with CI body, 3 mm perforated SS screen, flanged end connection, of following size confirming to IS specifications complete with gaskets, seal and accessories as required as per the technical specification. 200mm dia

PORTABLE TYPE FIRE EXTINGUISHERS

od56580/2019_2020 : Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gaugefor indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2006 with ISI mark.

od56582/2019_2020 : Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas. complete as required as per the technical specification.

FIRE DETECTION AND ALARM SYSTEM

od56586/2019_2020 : Supply, installation, testing and commissioning of Addressable type Manual Call Point Re-settable type via special key (non-breaking glass type) complete with push button, enclosed in box with provision for cable or conduit coupling, etc and complete as required as per the technical specification. The product shall be FM approved and UL Listed.

od56810/2019_2020 : Supply, installation, testing and commissioning of Addressable type Multi Detector (photoelectric cum rate of rise temperature type) complete with all accessories like base. base box, etc. to be installed under/above false ceiling, roof and concealed space, etc. interconnecting to loop cable complete as required. Shall be UL listed and FM Approved, complete as required as per the technical specification.

od56591/2019_2020 : Supply, installation, testing and commissioning of hooter cum strobe at different locations complete for both audio and visual indication with all fixing accessories, etc. under false ceiling, roof, wall, etc., with a time delay of max 30sec, interconnecting loop cable complete as requiredas per the technical specification. The product shall be FM approved and UL Listed.

od56592/2019_2020 : Supply of addressable type/conventional with addressable module 24V, 2A Power supply unit for hooters with battery backup. The status of the power supply unit must be monitored from the FACP and alarm shall be obtained if the power supply unit fails to operate.The product must be CE/FCC certfied, complete in all respect and as required as per the technical specification.

od56732/2019_2020 : Supply, installation, testing and commissioning of fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable complete as required as per technical specification. The product shall be FM approved and UL Listed.

od56733/2019_2020 : Supply, installation, testing and commissioning of wall mounted talk back unit including all necessary accessories complete as required as per the technical specification..

od56595/2019_2020 : Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required as per the technical specification.

od56597/2019_2020 : Supply, installation, testing and commissioning of public address and talk back system consisting of multiple zone public address cum talkback console with mike and selector. multiple channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA mic, multiple channel selector with all call and mic on. The console shall be provided with suitable capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.

od56735/2019_2020 : Supply, Installation, Testing Commissioning of 16/32 bit intelligent Addressable Fire Alarm Control Panel with 1 loops (each loop capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km) including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module and fire device loop interface cards for indicating devices and should also be networkable in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches when ever any Alarm is triggered. The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit,etc complete in all respects as per the technical specification and shall be UL listed and FM approved. The Panel shall also have Logic hardware and software built into it for time delay operation of hooter and others as follows :(a) programming software for the system(b) automatic system test activates(c) detector sensitivity adjustments(d) alarm verification (e) Alpha/numerical display(f) provision to connect to PCs and external printers

od56599/2019_2020 : Supply and laying of 2x 1.5sq.mm armored Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above ground as per technical specification

od56600/2019_2020 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

od56602/2019_2020 : Supply, installation, testing and commissioning of CO2 Liner heat detection/trace tube panel/modular flooding system for electrical panels consisting of CO2 cylinders with weight calculated on the basis of volume of single largest compartment within the panel. UL listed trace tube of required design length, for the 9 L cylinder (One number), also consisting of master control unit with digital display, load cell, discharge hooter/flashers, pressure gauges, pressure switches for low pressure/discharge indications interlocks with fire alarm system of the premises all accessories of complete functionality of system, complete as required as per the technical specification.

SIGNAGE

od56581/2019_2020 : Supply and installation of glow signage (photo luminescent) such as Fire Duct/Fire Lift/Staircase signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws doubletape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od56583/2019_2020 : Supply and installation of glow signage (photo luminescent)of FIRE ASSEMBLY POINT of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od56584/2019_2020 : Supply and installation of glow signage (photo luminescent)of "FIRE ORDER" of standard size (500*800 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws double tape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od56588/2019_2020 : Supply and installation of glow signage (photo luminescent)of such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws doubletape or hanged from the false ceiling with the help of chain screws etc. complete as required as per the technical specification.

od56589/2019_2020 : Supply and fixing of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwiched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required as per the technical specification.

Electrical

od101220/2019_2020 : "Main Fire Pump PanelSupply Installation Testing Commisioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with bus bars extendable on both sides, including all the necessary internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates (required for short circuit rating, temperature rise test and IP classification) with following switchgears, metering instruments and accessories etc.complete in all respect as per drawing and technical specification. The panel shall be with top entry to receive incoming outgoing cable, all necessary interconnection accessories as per particular specification single line diagram.INCOMER: 160A, FP SDU- 1 No.INSTRUMENTS:(0 to 500 )V analogue type Voltmeter for 3 phase, 4 wire operation with selector switch - as per SLD Analogue type ammeter (0-160A) for 3 phase, 4 wire operation - as per SLD Phase indicating lamps LED type RYB - as per SLD ON, OFF LED indicating lamps as per SLD4A control SP MCB -as per SLD160/5A, Class 1.0, 15VA, Cast Resin CT for metering - as per SLD BUSBARS:160 Amp TPN bus bars of high conductivity electrolytic quality Aluminium alloy.OUTGOING: 125A TPN SDU- 1 No. for electric main pump,Star Delta starter of suitable rating for 415V, 50Hz, 3 phase for main electrical fire pump(60 HP) with kW in accordance with the main electric pump. The starter shall have ON, OFF push button, ON, OFF indication lamp complete with all accessories and internal wiring required for automatic and manual operation as required. - 1 No's32A, TP, SDU - 2 No. for jockey pump,terrace pumpStar Delta starter of suitable rating for 415V, 50Hz, 3 phase Jockey pump (11 HP). The starter shall have ON, OFF push button, ON, OFF, LED indication lamp, thermal over load relay, single phase preventer, complete with all accessories and internal wiring required for automatic and manual operation - 1 No ""Spare:125A, TPN, SDU- 1 No. , 32A, TPN, SDU - 1 Nos.,25A DP MCB-1Nos , Diesel Engine Control - 1 No. , Each Diesel engine control consisting of: 25A DP C curve control MCB, 25A On/off control switch - 2 No. , Auto / manual selector switch, 3 attempt starting device, push button etc., All required timers, relays, fuses and accessories for automatic operation of diesel engine. Indication lamp for high water temperature, engine fail to start, engine On indication, high/low lube oil pressure.Necessary control wiring for start / stop solenoid, line / oil pressure switch, temperature switch, pressure switch to fire pump panel, diesel engine control panel to fire pump panel etc.Battery Charger suitable for 12 V / 24 V DC with boost and trickle selector switch, 0 -15 V / 0 - 30 V DC volt meter, 0 - 20 A DC Ammeter - 02 No. 6 panel annunciation window for fault indication with hooter, accept reset push button, separate hooter for Diesel /electrical pump on running condition - 1 NoThe system shall include all accessories to control the operation of main electric pump, diesel pump, jockey pump as per the operating sequence for the fire fighting system indicated in the technical specification . The battery charger and all its components should be housed inside the main fire pump panel. The panel shall be painted with approved colour. The Scope of works also includes

od58049/2019_2020 : Supply of following 3.5C 185 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.

od58050/2019_2020 : "CABLES AND CABLINGSupply of following 3C 70 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date, complete in all respects as per technical specification."

od58052/2019_2020 : "CABLES AND CABLINGSupply of following 3 C 6 Sq.mm Al size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date, complete in all respects as per technical specification."

od58054/2019_2020 : Supply of following 4C 2.5Sq.mm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

od101214/2019_2020 : "Supply of 2C 6 Sq.mm Al 1.1 KV gradeXLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date."

od101215/2019_2020 : Supply installation, testing and commissioning of FASD starter in sheet steel enclosure for 10 HP , 3 PHASE motor including auxilliary contactors, capacitor , and all necessary accessories as required complete.

od101216/2019_2020 : Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)

od101217/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following 2C 6 sqmm Al size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.12 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 70 sq. mm (35mm)

7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm

od101222/2019_2020 : Supplying and making end termination with brass compression gland and aluminium lugs for following 3C 6 sqmm Al size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

od101223/2019_2020 : Supply of following 4C 2.5 sqmm Cu size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper FRLS conductor cable conforming to IS 7098 (Part 1) amended upto date.

7.2.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm

7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm

7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.7.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.7.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

od101225/2019_2020 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. complete in all respect as per technical specification.4 SWG Cu

od101226/2019_2020 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. complete in all respect as per technical specification.10 SWG Cu

od101227/2019_2020 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc.complete in all respect as per technical specification (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt spring washer spaced at 50mm)25mm x 6 mm GI

od101228/2019_2020 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. complete in all respect as per technical specification.25mm x 6 mm GI