KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KITCO_261419_1Bid Award Id
ViewTender No
DSYA/KITCO/CL/33/2018Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
1789.514
-
-
od1828/2018_2019 : Soling with soling stone of size 150 to 75 mm brokenstone and blinding materials, including hand packing and wedging them tightly so that the whole is formed as a solid mass, spreading blinding material in 12mm thick layers and sweeping the same to fill the voids,watering profusely and consolidating with hand rammer/ plate vibrator etc complete as per the direction of Engineer-in - Charge.
20.668
-
-
od70477/2018_2019 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
1226.399
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
95.282
-
-
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
19.863
-
-
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
25.485
-
-
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
19.863
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
635.906
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1055.432
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
302.031
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
126.639
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
84
-
-
5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
75.091
-
-
5.9.9 : Centering and shuttering including strutting, etc. and removal of form for:Arches, domes, vaults up to 6m span
7.5
-
-
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
43.114
-
-
5.9.13 : Centering and shuttering including strutting, etc. and removal of form for:Vertical and horizontal fins individually for forming box louvers band, facias and eaves boards
10
-
-
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
69.34
-
-
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
189.842
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete all levels. Thermo - Mechanically Treated bars of grade Fe-500D or more
36734.657
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. All work upto plinth level
258.357
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. .All work above plinth level upto floor V level
50.763
-
-
5.34.1 : Extra for providing richer mixes at all floor levels. .Providing M-30 grade concrete instead of M-25 grade BMC/RMC.
62.856
-
-
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
22877.685
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
1503.678
-
-
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
126.534
-
-
15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
1252.552
-
-
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth: CM 1:6 ( 1 cement :6 coarse sand) etc complete
35.691
-
-
50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
92.455
-
-
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
11.474
-
-
6.13.2 : Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement : 4 coarse sand)
14.233
-
-
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
128.947
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
36.02
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
146.95
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
146.95
-
-
21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
9.452
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
20.689
-
-
9.12 : Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. ( Area of opening for glass panes excluding portion inside rebate shall be measured).
3.662
-
-
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
0.04
-
-
9.20.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
2.205
-
-
9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
8
-
-
9.97.2 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm
12
-
-
9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.
6
-
-
9.98 : Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, but nut and washers etc. complete.
2
-
-
9.75.2 : Providing and fixing bright finished door latch with necessary screws etc. complete:250x16x5 mm
32
-
-
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
6
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
46.401
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
13.441
-
-
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
85.56
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
526.611
-
-
10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube
4668
-
-
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
194.942
-
-
od2068/2018_2019 : Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge at all levels.
65.281
-
-
8.2.2.2 : Providing and fixing 18 mm thick granite gang saw cut, mirror, polished, premoulded and prepolished, machine cut granite or kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
5.76
-
-
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12
-
-
11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick
72.842
-
-
11.27 : Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
8.73
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1939
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
735
-
-
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
18.56
-
-
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
741.33
-
-
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1061.973
-
-
13.50.4 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
205.553
-
-
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
168
-
-
13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
37.553
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
286.848
-
-
13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
7106.801
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
469.422
-
-
13.2.1 : 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)
1734.223
-
-
13.10 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
651.831
-
-
od69799/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.)
338.207
-
-
od69800/2018_2019 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatment and creating a chemical barrier as per IS 6313 (Part II) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
136.171
-
-
od28933/2018_2019 : Extra for carrying available good earth by Mechanical Transport including loading, Unloading and stacking over an additional lead upto 5 km for the purpose of filling, as per the directions of engineer-in-charge
250
-
-
16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
9970
-
-
od58/2018_2019 : Supplying, laying and jointing perforated HDPE pipe PE 80 of size 110 mm dia 10 kg/cm2 with 5 mm dia perforations, minimum 125 perforations per running metre, in trenches of size 35cm x 45cm at required slope, disposal of excavated earth, as per specifications etc complete including the cost of all materials, labour etc. and as directed by the Engineer-in-charge.Care should be taken while laying so that the perforations will be along the bottom of the pipe. The rate to include cost of all materials, labour charges, lead, lift etc complete.
1794
-
-
od59/2018_2019 : Providing and laying of 20mm downgraded metal (Coarse rubble granite Stone) of approved quality as filter media around the drainage pipes in the sides of trench as per the directions of Engineer-in-charge. Rate inclusive of all materials,transportation and labour charges complete.
265.512
-
-
2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia
546
-
-
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
343
-
-
od60/2018_2019 : Providing and laying of compacted fill with 10mm to downgraded metal (Coarse rubblegranite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
402.625
-
-
od61/2018_2019 : Providing and laying of compacted fill with 20mm to downgraded metal (Coarse rubblegranite Stone) combined to form a contour and elevations to the desired level as per Drawings.Rate inclusiveof all materials,transportation and labour charges complete.The work has to be completed as per detailedspecifications and or as approved by Engineer-in-charge
482.925
-
-
od62/2018_2019 : Providing and laying of compacted fill with 40mm metal (Coarse Rubble Granite Stone)combined with a downgraded stone up to 30mm to form a contour and elevations to the desired level as perDrawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to becompleted as per detailed specifications and or as approved by Engineer-in-charge
643.525
-
-
od63/2018_2019 : Supply and Installation of a pair of Football goal post of superior quality with nets as per FIFA specifications.
1
-
-
od64/2018_2019 : Providing and installing root zone, over graded and rolled subgrade include necessary trimming to form the required camber and gradients with layers of course graded medium, fine graded sand to a minimum thickness of 50mm and providing sand manure mix layer consisting of medium fine sand of U.S.G.A specification, biofibre and biosoil @10kg/sq.mtr to a minimum thickness of 150mm. Mixing the above to ensure a homogenous mix and accurate mix of components. The sand manure mix shall be compacted repeatedly by rolling to the grade & camber required and irrigating as required. The cost shall include applying pre mergence herbicide, pre plant fertilizers @10kg/sq.m to the entire area, laying of geotextile as required cost of all labour, material lead etc complete as directed by the Engineer in charge.
8970
-
-
od65/2018_2019 : Supplying and Planting grass over the red earth and sand bed closely to get a thick grass lawn suitable for ground in rows of 5cm apart in both direction, keep the area moisture by spraying and sprinkling water till the grass gets sufficient deep roots cutting to level the top surface, trimming and dressing etc. complete as directed by the Engineer-in-Charge. Bermuda Grass
8970
-
-
od66/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for extrenal works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. 40mm-6 kg/cm
144
-
-
od67/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for external works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. &HDPE pipe 50 mm-6 kg/cm
180
-
-
od68/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete for external works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. &HDPE pipe 63mm-6 kg/cm
355
-
-
od69/2018_2019 : Design, supply, laying & jointing in position HDPE pipes, including all fittings and accessories and suitable for the designed working pressures. This includes jointing of pipes & fittings as per the manufacturers specifications ,trenching ,refilling & testing of joints complete as per direction of Engineer in charge -for exposed works. The work has to be executed as per approved drawings and or as directed by Engineer - in Charge. HDPE pipe 90 mm-6 kg/cm
200
-
-
od70453/2018_2019 : Supplyingand filling river sand brought from outside in filter media, including transportation,loading, unloading ,taxes etc complete as directed by the Engineer- in- charge
1.125
-
-
od70460/2018_2019 : Providing and fixing heavy duty Cast Iron Manhole covers including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by Engineer in Charge.<br>600x600mm
3
-
-
od69843/2018_2019 : Supply and fixing of 50 mm 6kgf/cm2 PVC pipes as sleeves in precast drain cover slab at 0.4m interval in the approved<br>pattern as shown in the drawings and as instructed by the engineer-in-charge
412.5
-
-
60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
148.92
-
-
od28935/2018_2019 : Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, bending, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
3920
-
-
od28936/2018_2019 : Structural steel work in single section, fixed with or without connecting plate including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels.
12135.025
-
-
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
810
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
8
-
-
16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
150
-
-
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
1000
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
5
-
-
od29457/2018_2019 : Providing and fixing white vitreous china counter top round wash basin 470 mm or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm angle valve, etc. complete as directed by the Engineer-in-charge. (The purchase price considered for washbasin is Rs.1580, pillar cock is Rs.1100,bottle trap is Rs 1050,angle valve is Rs 550 and any deviation plus or minus in the purchase price will be adjusted in the price quoted).
16
-
-
od70883/2018_2019 : Providing & fixing star white vitreous china flat back urinal with urinal flush valve, of approved size with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels.
11
-
-
od29458/2018_2019 : Supplying and fixing approved quality white vitreous china urinal division plate 700 x 340 including cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge.
10
-
-
od70957/2018_2019 : Providing and fixing CP brass hand spray with lever control (health faucet) of make 1meter long flexible tube and wall hook,CP brass angle valve and all fittings etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.
10
-
-
od29540/2018_2019 : Providing and fixing sanitary fixtures for handicapped toilet including one wash basin of size 65 x 35cm, one pair mounting brackets, one number pillar cock & all other related fittings like bottle trap, angle cock, waste coupling etc, one number EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76cm & 5 nos. of grab rails 60cm etc, designed for people with special needs comes with as per manufactures specification including cutting and making good the walls and floors wherever required as directed by Engineer-in-Charge.
1
-
-
od29541/2018_2019 : Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing.
11.16
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
4
-
-
od70972/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels 75mm dia
6
-
-
od70973/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame & Round Frame with Flat Round Cover with Rubber Seal & SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels 110mm dia
7
-
-
od70974/2018_2019 : Providing and fixing premium quality C.P. brass wall shower mixer with overhead shower and shower arm with 115mm long bend pipe on upper side,connecting legs and wall flanges of approved make and model including cost of all materials, labour etc., complete as directed by the Engineer-in-Charge at all levels.
2
-
-
od70975/2018_2019 : Providing and fixing CP conceled stop cock 20mm or nearest size Best Quality including cost of conveyance of all materials to site labour charges etc. complete.
2
-
-
50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
2
-
-
od29459/2018_2019 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
5
-
-
od29460/2018_2019 : Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer-in-Charge
75mm OD (4 kg/cm2)
3
-
-
50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
36
-
-
50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
5
-
-
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
8
-
-
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
40
-
-
50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
6
-
-
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
85
-
-
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
66
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
33
-
-
18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes
54
-
-
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
18
-
-
od70966/2018_2019 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall
80 mm nominal dia pipes
6
-
-
od70967/2018_2019 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall - 65 mm nominal dia pipes
18
-
-
18.9.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes
100
-
-
18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes
288
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
24
-
-
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
36
-
-
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
60
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
30
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
90
-
-
18.8.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes
21
-
-
od70969/2018_2019 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.&40 mm nominal outer dia pipes
15
-
-
od29461/2018_2019 : Supplying approved make PVC gully trap of size 160x110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size (inside) the weight of cover to be not less than 4.5kg and frame to be not less than 2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm, 115 thick brick wall in CM 1:6 on a foundation of PCC 1:4:8. 100mm thick plastering inside with CM 1:3, 12mm thick with a neat cement flushing coat and conveying to site, cleaning, installing and testing approved make PVC gully trap with 160mm outlet (fabricated), surrounding with CC 1:1.5:3, 150x150mmm, top with CI grating above the PVC gully trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in-Charge.
4
-
-
od29463/2018_2019 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.: 300 mm dia RCC pipes.
15
-
-
od70960/2018_2019 : Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including<br>collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.150 mm dia RCC pipes.
100
-
-
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
4
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
6
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
10
-
-
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
8
-
-
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
4
-
-
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
2
-
-
18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal
4
-
-
18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal
2
-
-
od70982/2018_2019 : Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 50 mm dia
1
-
-
od70983/2018_2019 : Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 40 mm
4
-
-
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2500
-
-
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
19.7.2.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5
1
-
-
od29467/2018_2019 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone<br>aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 60 x 60 cm and 100 cm deep including C.I. cover 500 mm with frame (medium duty) : With bricks.Class designation 75
8
-
-
19.8.1.1 : Extra for depth for manholesSize 90x80 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
1
-
-
19.8.2.1 : Extra for depth for manholesSize 120x90 cmWith common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5
1
-
-
od29468/2018_2019 : Providing and fixing C.I. grating 150x150 mm as directed by the Engineer-in-charge
4
-
-
od70888/2018_2019 : Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.2 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
2
-
-
od70992/2018_2019 : Providing and fixing CI Y type strainer rating PN 10 complete with SS 304 filter screen of 1mm Perforation X 24G flanged and connection, flanges etc.including cost and conveyance of all materials,labour etc. complete and as directed by Engineer-in-Charge 50mm &Y type strainer
1
-
-
od70993/2018_2019 : Providing and fixing enclosed type water meter (bulk type) 65mm dia conforming to IS :2373 and tested by Municipal Board complete with bolts, nuts, rubber etc. (The tail pieces if required will be paid separately) including cost and conveyance of all materials, labouRretc. complete and as directed by Engineer-in-Charge
1
-
-
od70988/2018_2019 : :Providing and fixing C.I. basket type dirt box strainer for bulk type water meter withnuts, bolts, all accessories etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer in charge 65mm dia
1
-
-
od70989/2018_2019 : Providing and fixing C.I Y type strainer with nuts, bolts, rubber gaskets etc complete conforming to relevant IS standards;65 mm dia
1
-
-
od70990/2018_2019 : Providing and fixing C.I. basket type dirt box strainer 50mm dia for bulk type water meter with nuts, bolts, rubber etc. complete conforming to IS : 2373 : including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
1
-
-
od70991/2018_2019 : Providing and fixing enclosed type water meter (bulk type) 50mm dia conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber etc. (The tail pieces if required will be paid separately) including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
1
-
-
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
9
-
-
10.7 : Providing and fixing ball bearing for rolling shutters.
2
-
-
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
23.76
-
-
19.18.2 : Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kg
3
-
-
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
25.2
-
-
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
3.03
-
-
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
64
-
-
od1833/2018_2019 : Providing and fixing 110mm dia perforated pipes in filter media complete as directed by the Engineer-in-Charge. The rate including cost and conveyance of all materials, labour and fixing charges, etc.
10
-
-
od70455/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge<br>100mm dia
2
-
-
od70456/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge<br>80mm dia
2
-
-
od70457/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge.<br>65mm Dia<br>
2
-
-
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
2
-
-
od29470/2018_2019 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3HP and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels.<br>Capacity : 6 m3/hr. <br>Head : 22m
4
-
-
od71062/2018_2019 : Supplying,installing, testing and commisioning of electronic integrated circuits and wireless water level controller including necessary cabling and transformers with all accessories etc complete as directed by Engineer in charge for water supply level control in water tanks
2
-
-
od71063/2018_2019 : Supply and installation of water level indicator with electronic integrated circuit and<br>necessary accessories etc complete as directed by the Engineer in charge at all levels
2
-
-
od71064/2018_2019 : Supplying and fixing of open well submerssible pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all level<br>Capacity: 8 m3/hr<br>Head: 15
1
-
-
Design, Supply, installation, testing and commissioning of outdoor duty (IP 54) pedestal mounted type weatherproof ,double door type KSEB metering panel , suitable for accommodating KSEB energy meter ( supply of energy meter is under KSEB scope) and consisting of 3 nos. of 125A HRC Fuse base with HRC fuses, 3 nos of 75/5A CTs Class 0.5 CT (or as per KSEB) ,3 nos of 2A SP MCB ,inter connections , providing necessary supports made from the same gauge CRCA sheet to fix energy meters, etc and to be fabricated out of 16 SWG MS sheet with locable door having glass window, sealing facility for KSEB, top cover and necessary overhang, undergone seven tank process ,powder coated finish and all mounting accessories as required complete with civil foundation. The panel shall be with all accessories as per specification.
1
-
-
MSB
Supply, installation, testing &commissioning of totally enclosed free standing floor mounting dust & vermin proof indoor cubicle type IP42 panel board suitable for 415V, 3 phase, 50Hz supply with provision for fixing incoming & outgoing switches fabricated using 2 mm MS sheet powder coated with necessary cable alley & bus bar chamber for all switches. The panel shall be with all accessories as per drawing & specification. (Refer particular specification).
Incomer
125AFPMouldedCaseCircuitBreakerwiththermalreleaseandneutrallink(Ics=100%Icu=25KA).- 1nos.
Din type HRC fuse unit, neutral link etc. -1No.
4A, C curve SP MCB - 3 nos.
RYB indication lamp, LED type - 3 nos.
(0-500)V voltmeter, Acc. class 1 with 90deg defl. scale - 1 no.
(0-125)A ammeter Acc. class 1 with 90deg defl. scale - 3 nos
6A 3 pole voltmeter selector switch - 1 no.
125/5A 5VA class 1 resin cast CT - 1 set
125A TPN busbar chamber withAluminium busbar.
Outgoing
40AFPMouldedCaseCircuitBreakerwiththermalreleaseandneutrallink(Ics=100%Icu=25KA).- 5nos.
1
-
-
Outdoor Lighting Panel (ODP) 1
Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel (ODP) cubicle type, totally enclosed, IP 54, free standing, floor mounting, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches fabricated using 2 mm CRCA sheet powder coated, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears accessories for the LT Panel
lNCOMER: Surge Arrestor Type 1+2 Combination- 1 Set40 A, FP, 100mA RCBO - 1 No BUSBARS-40 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy - 1 Set INSTRUMENTS 4A, C curve SP MCB - 3 Nos, RYB indication lamp, LED type - 1 Set, Voltage Surge Protector-1 Nos24 hrs Digital time switch with inbuilt battery - 8 Nos, 25A, AC-1 contactor -8 Nos, OUTGOINGS16 A, FP RCCB (100mA)-8Nos16 A C Curve FP MCB-8 Nos
1
-
-
WIRING AND ACCESSORIES
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
26
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
1
-
-
Wiring for circuit/ submain wiring along with earth wire with 2 X 1.5 sq. mm+ 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
32
-
-
Wiring for circuit/ submain wiring alongwith earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
78
-
-
Supplying and fixing following modularswitch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.
5/6 amps switch and socket
2
-
-
Supplying and fixing 6 Module (200mm X75mm), GI box along with modular base & cover plate for modular switches inrecess et cas required.
2
-
-
Supplying and fixing 6 Module Modularbase & cover plate on existing modular metal boxes etc. as required.
2
-
-
PART C
LIGHT FIXTURES AND FANS
Supply of pre-wired,20W LED T5 Batten fitting complete with all accessories and tube etc. including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
12
-
-
Supply of 1x14W decorative surface wall mounting slim flurescent type fixtures suitable for 10W T5 lamp including electronic ballast prewired complete as required
9
-
-
Supply of LED down light made of die cast aluminium, along with driver,system wattage maximum of 12 Watts, power factor 0.9,rated life of L70 @ 40,000 hours, system efficacy greater than 50lumen/watt and including all necessary accessories as required complete.Make:WIPRO LD80-101-XXX- 60-XX or equivalent approved make
2
-
-
Installation, testing and commissioning of prewired flourescent/ CFL/ LED fitting of all types complete with all accessories and fluorescent lamps of all types directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheatherd round copper conductor flex wire or extending the original wiring and giving connections as required.
23
-
-
Supply of Ventilair DXW-Neo (150mm) Exhaust Fan suitable for operation on single phase 230V ,50Hz AC supply complete with all accessories as required
complete.(Make crompton, Havells, Philips or equivalent approved make)
5
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
5
-
-
Supply, installation, testing and commissioning of LED Flood light luminaire of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 250 (+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens not less than 4500 and system efficiency greater than or equal to 90%.The Light fitting shall be with all required accessories suitable for mounting in (48-60)mm. The luminaire should meet all the technical specifications as mentioned. (Make: Wipro LR02-292-XXX-57-SP or equivalent approved make)
48
-
-
Supply installation, testing and commissioning of surface mounting, pole of 12 meter height bracket suitable for mounting 6 no of street Light fixtures. The hot dip GI pole with polyurethene coating shall be provided with foundation base plate and the bracket assembly shall be secured on to the pole top . The swaged pole with bracket,built-in cylindrical GI control box of same material with service door coated with epoxy zinc phosphate primer and finished with polyurethane based paint. The control gear box is prewired with DP MCB, FP connector for easy loop-in loop-out suitable for 3phase 4 wire AC supply.The pole shall have provision for connecting the earth wire. ( or equivalent approved make)
8
-
-
PART D
DB's AND ACCESSORIES
Supplying and fixing of 6 ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1
-
-
Supplying and fixing 8 way (4 + 24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
-
-
Supply and fixing of 4 pole 40 amps. (415 Volts), 100mA sensitivity residual current circuit breaker with MCB having earth leakage and overload protection (RCBO) as per specification as required
2
-
-
Supply and fixing of 4 pole 25amps. (415Volts), 30mA sensitivity residual current circuit breaker with MCB having earth leakage and overload protection (RCBO) as per specification as required
1
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
10
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Triple Pole
1
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Four Pole
6
-
-
PART E
CABLES & CABLING
Supply of 3.5C 120 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
82
-
-
Supply of 4C 25 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
42
-
-
Providing and fixing 10 SWG dia copperon surface or in recess for loop earthing along with existing cable as required.
1911
-
-
Supply of 4C 16 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
32
-
-
Supply of 4C 10 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
37
-
-
Supply of 4C 4 Sq.mm Al 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
1800
-
-
Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for 4C 25 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
2
-
-
Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for 3.5C 120 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
2
-
-
Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for 4C10 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
2
-
-
Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for 4C16 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
2
-
-
Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for 4C 4 Sq.mm Al XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
16
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
1148
-
-
44 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 95 & upto 185 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
77
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of upto 35 size on wall surface as required.
199
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of above 95 & upto 185 size on wall surface as required.
5
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sqmm size in the existing RCC/ HUME/ METAL pipe as required.
50
-
-
PART F
EARTHING AND ACCESSORIES
Earthing with C.I. earth plate 1.2 meter * 1.2 meter, 12.5 mm thick including all accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required.
4
-
-
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as
required. 25mm X 6mm GI
20
-
-
Providing and fixing GI/Cu strip/wire at 0.50m below ground as required.
25mm X 6mm GI
75
-
-
SPRINKLERS & ACCESSORIES
Supply,Fixing & Commissoning of Pop up sprinkler full/part circle having radius of throw 15m - 23m & flow of 0.09 - 0.61 ltr./sec.at an operative pressure of 2.5 - 4.5 kg/cm.sq. , The sprinkler is gear driven rotary type with slip clutch mechanism and heavy duty retract spring. memory arc , non strippable and brass reinforced nozzle turret ,left right both side arc adjustment,Memory arc technology,part and fullcircle in same sprinkler .The sprinkler shall have multi-function, pressure-activated wiper seal for low pressure opreation a The sprinkler shall have internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
35
-
-
Supply,Fixing & Commissoning of Sod Cup Kit allows users to grow turf on the cap of the rotors. This allows for a nearly invisible installation for applications such as sportsfields. The rugged construction of the Cup Kit provides maximum durability while maintaining maximum player safety.Integral pull up slot. Easy arc adjustment after installation through inner cup. Drain holes to promote healthy turf growth. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete. engineering plastic
35
-
-
Supply,Fixing & Commissoning of 1" Pop up Connecting Swing joint Assembly. The tubing shall be made of UPVC ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. The fittings shall be made of UV resistant thermo plastic. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in charge. Rate inclusive of all materials,fittings,labour,transportation complete.
35
-
-
Supply,Fixing & Commissoning of HDPE service saddle of varying size with pressure rating of PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in charge. Rate inclusive of all materials,fittings,labour,transportation complete.
35
-
-
VALVES & ACCESSORIES
Supply,Fixing & Commissoning of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, non mechanical ,with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
7
-
-
Supply,Fixing & Commissoning of a double acting 1/2 " Air release valve, made of HDPE or higher grade material. The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
4
-
-
Supply,Fixing & Commissoning of 12" Rectangular Valve Box made of HDPE or higher grade material, with green lid and corrugated structure with unique shovel access slot and bolt hole knockout. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
7
-
-
Supply,Fixing & Commissoning of 6" Round box of HDPE or higher grade material, with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
7
-
-
Supply,Fixing & Commissoning of 1.5 inch quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
3
-
-
Supply,Fixing & Commissoning of brass key threads into top of quick coupling valve to provide water access. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
3
-
-
FILTERATION UNIT
Supply,Fixing & Commissoning of 3" Disc Filter made of HDPE having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working presure of 12 Bars. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
1
-
-
PUMPING UNIT
Supply,Fixing & Commissoning of Monobloc or openwell submercible pumpset of having discharge and head of design flow .
Duty of Pump : 6.50 lps / Each Pump
Pressure Head Range = 55 - 60 Mtr
No. of Pumps : 1 Working + 0 Standby/.Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOL starter, start / stop push buttons , Ammeter , Single phase preventor, Voltmeter , Indicating lamps , MCB , Dry level guard sensor with control cable, etc. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Suction ,Delivery & Header Pipes of size suitable for the pump flow ( ASTM sch 40/80 or PVC 10Kg/cm2). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of CI control Valve, Butterfly Valve in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 2" gun metal Non Return Valve PN 10 with all accessories to prevent back flow. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of PVC Pressure release valve 2" with all accessories . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Cast Iron Paddle Wheel Water Meter Metal Flanged of pressure rating 10 Bar with all accessories . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Automation Equipment
Supply,Fixing & Commissoning of 14 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto -55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strenth 1400PSI for two way communication betwee nsolenoid valvel and decoders complete .Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
762
-
-
Supply,Fixing & Commissoning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory for 100years,10KV surge protectionwith removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,wityh contract default programe s,slow closing valve removable battery with sensor terminals Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 3" Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0,7 to 10 bar and maximum flow of 10 to 100 m3/h ,max water temp. upto 60°C with 24 VAC - 50 Hz,coil resistance 30ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4bar and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30 ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
7
-
-
Supply,Fixing & Commissoning of Pressure Regulating Module (Dial) to Maintain constant outlet pressure between 1.04 to6.9 bar. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete
7
-
-
Supply,Fixing & Commissoning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant , fits wire from 22 ga to 6 ga as per specifications complete . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete
21
-
-
Supply,Fixing & Commissoning of moisture sensing device ,to measure soil temp,EC ,Moisture level complete to convert as smart controller,with corrossion resistant sensor and setting thershhold moisture level . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of ASTM automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved complete . Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Supply,Fixing & Commissoning of Pump relay 24 AC PLA relay ,stabiliser 300watts. Work has to be executed as per the approved drawings and/or as per the directions of the engineer-in-charge. Rate inclusive of all materials of approved make,fittings,labour,transportation complete.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements