KITCO Limited Tender

Excavation in ordinary rock using manual means including loading in a truck and carrying of excavated material and dumbing at suitable place with in all lifts and leads upto 1000 metres as per MORTH specification and as per direction of Engineer-in-charge.

Excavation for foundation in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres as per Morth specification 301 and as directed by the Engineer-in-Charge.

Construction of dry rubble works for retaining wall with all leads and lifts conveyance of materials etc. complete as per Morth specification 2506 and as directed by the Engineer-in-Charge.

Construction of embankment with approved earth obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with plate combactor to meet requirement as directed by the Engineer-in-charge.

Construction of dry rubble flooring at low lying and wheel tracks for forming the road way with all leads and lifts conveyance of materials etc. complete as per Morth specification 2506 and as directed by the Engineer-in-Charge.

Providing and laying PCC mix M20 to proper gradients lines and levels machine mix machanically vibrated including cost of centering and shuttering curing etc. Complete and cost and conveyance lead lift of all materials labour ect complete for the sides of inter locking tiles as per MORTH specification 1500, 1700 and 2100 and as per the direction of the Engineer-in-Charge.

Providing and laying RCC mix M20 to proper gradients lines and levels machine mix machanically vibrated including cost of centering and shuttering curing ect. complete and cost and conveyance lead lift of all materials laboure etc complete for the sides of inter locking tiles as per MORTH specification 1500, 1600 and 1700 and as per the direction of the Engineer-in-Charge.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MORTH specification 1600 and as per the direction of the Engineer-in-Charge.

Providing and laying factory made chamfered edge 80mm thick Cement Concrete paver blocks of of M-30 grade with approved color design and pattern., made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds,laid in required Grey colour & pattern over a coarse of granular sub base by providing close graded material spreading in uniform layers on prepared surface at OMC and compacting with plate vibrator to acheive the desired density of 100mm thickness and laying factory made tiles over 50MM thick compacted bed of 6mm size crushed metal, compacting and proper embedding / laying of inter locking paver blocks into the metal bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:

Providing and fixing 32 mm dowel rod embeded into hard rock upto 50cm and fixing with cement, overall length 1.5 mtr by drilling the holes with compressor and drilling equipments etc. complete as directed by the Engineer-in-Charge

Supplying and fixing 40mm dia GI pipe in lines and levels for hadrial embedded in the CC post