KITCO Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KITCO_269332_1Bid Award Id
ViewTender No
PTR/KITCO/CL/43/2018Tender Authority
KITCO Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Do same as above item no.2 but for every additional lift of 1.5m to 3.00m or part there of :
All kinds of soil
98.214
-
313.35
Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consoldating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge
134
-
174.49
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
328
-
192.03
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead lift , etc. complete for all work up to plinth levels as directed by Engineer- in-Charge. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
5.914
-
6677.11
Extra for providing and mixing water proofing material in cement concrete work, masonry work, plastering etc in the proportion recommended by the manufacturers including cost and conveyance of all materials, labour, curing, lead lift , etc. complete as directed by Engineer-in-Charge at all levels.
13.876
-
74.75
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-25 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge . Minimum cement content considered in this item is @ 330 kg/cum.
All work upto plinth level.
6.585
-
9774.14
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 340 kg/cum
All work upto plinth level.
34.803
-
9892.9
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-25 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 330 kg/cum
All work above plinth level upto floor V level.
2.4
-
10889.39
Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 340 kg/cum
All work upto floor V level.
2
-
11008.15
Providing ,hoisting and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete.but excluding the cost of reinforcement with
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1.072
-
10009.8
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-Charge at all levels.
Thermo-Mechanically Treated bars
4650.551
-
105.72
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
34.04
-
304.97
Suspended floors, roofs, landings, balconies and access platform.
27
-
623.52
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
4
-
515.63
Columns, Pillars, Piers, Abutments, Posts and Struts.
19.2
-
703.78
Edges of slab and breaks in floors and walls under 20 cms wide
22.35
-
180.7
Walls of (any thickness)including attached pilasters butteresses plinth and string course etc.
209.856
-
560.11
(SH: MASONRY WORK)
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift,etc complete as directed by Engineer-in-Charge.
5
-
5213.46
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 (1 cement : 6 coarse sand) including scaffolding, raking out of joints,curing, cost and conveyance of all materials,labour, lead, lift,etc complete as directed by Engineer-in-Charge.
6
-
6376.08
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor five level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
5
-
6620.46
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)including raking out of joints,filling the joints /hollows with suitable sizes of split stones,filling the joints clearly, curing,cost and conveyance of all materials, cost of bond stone (should be provided at every 0.5 sqm of face area) , lead, lift etc. complete as directed by Engineer-in-Charge at all levels.
10
-
6082.46
(SH: JOINERY WORKS )
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames ofcross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm toreceive shutter of 30 mm thickness .The laminate shall be moulded withfire resistant grade unsaturated polyester resin and chopped mat. Doorframe laminate shall be 2 mm thick and shall befilled with suitable woodenblock in all the three legs. The frame shall be covered with fiber glass fromall sides. M.S. stay shall be provided at the bottom to steady the frame.
55
-
748.57
Providing and fixing to existing door frames.
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturatedpolyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitableblocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames etc., complete at all levels as directed by the Engineer-in-Charge.
24
-
3727.55
Providing and fixing hollow metal fire door fully flush type pressed galvanised steel single leaf of Indiga make or equivalent make conforming to IS:3614(Part-2), BS:476 (Part 20&22) and ISO:834 with door frame of single rebate profile of size 100x57mm with bending radius of 1.4mm made from 1.5mm thick galvanised steel sheet (16 gauge) with 44mm thick steel double skin door shutter fully flushed with lock seam joints at stile edges, manufactured from 1.0mm thick galvanised steel sheet (18 gauge) and infill material of resin bonded honey comb paper with internal insulation including powder coating the frames and shutter with min (60 - 80 micron DFT) of approved colour. The rate shall include supply and fixing 3mm thick base plates, providing anchor bolt at all joints of frames for fixing to wall/RC surface, reinforcement pad for fixing of door closers/floor spring, factory finish, pre-punched cut outs to receive hardware and iron mongery, 3mm thick hinge plates predrilled to receive hinges for screw mounted fixing, stainless steel double bearing butt hinges of size 102 x 89 x 3 mm thick, mortise sash lock with 5 pin tubular brass cylinder 70mm thick with internal knob operation and external key provision with knob, nickel lever handles.Vision Glass to be provided as per the norms of Fire Authority with 2 hrs fire rated glasses.
3.4
-
6630.07
Supply and installation of merino model type- PD-Door nylon series or equivalent toilet door consisting of high pressure 12mm thick compact laminate board fo size 1050mm width x 2100mm height including bottom gap 10mm. Including the cost of accessories made with merino make aluminium, Nylon polymide,such as Aluminium 'D'post channel, Nylon coat hook, Nylon WC lock set c\w occupancy indicator,Nylon door knob, Nylon hinges(gravity to close)Nylon D post end cap, door stopper rubber lining, s.s Screws 304G, PVC wall plugs etc.. .including cost and conveyance of all materials,labour charges, etc. complete as directed by Engineer in Charge
1
-
12650
Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
3000
-
195.05
Providing and fixing CI manhole cover with frame 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg in concrete slab over manholes/Inspection Chambers/Drains, including cost and conveyance of all materials, all labour charges, all taxes,lead, lift, sundries, etc., complete. as directed by the Engineer- in-Charge
10
-
9138.51
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
75
-
961.56
(SH: FLOORING WORK)
Providing and laying Antiskid Ceramic floor tiles 300x300mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge at all levels
14
-
1219.25
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
30.6
-
1298.82
Providing and laying in correct line and level 60mm thick cement concrete flooring with 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate, 65%20mm metal and 35% 12mm metal)mixing admixtures in recommended proportion (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability.Providing bull marks on the floor area one day prior for getting proper level. Applying by sprinkling carborundum based floor hardeners of approved make on the top of concrete at the ratio of 5kg/m2.Finish the concrete using power floater and power trowel for smooth finish including watering ,curing, cleaning etc..and cutting the grooves in 2mx 1m, 5mm width x 20mm depth with mechanical concrete groove cutting machines and filling the groove with approved epoxy sealants. Rate shall include cost and conveyance of all material, labour etc.. Complete as directed by Engineer - in Charge.(All works covered by this specification shall be carried by an experienced agency having sufficient experience in this type of flooring system Only skilled and experienced persons shall be employed for purpose.)
25
-
858.76
Providing and laying in sunken floors with PCC 1:3:6 (1 cement: 3 coarse sand :6 graded stone aggregate 20 mm nominal size) including consolidating, curing, watering ,cost and conveyance of all materials,labour charges,lead,lift etc., complete as directed by the Engineer-in-charge at all levels.
2
-
9031.86
Supplying and laying approved quality and size pressed cement tiles 20mm thick in CM 1:4 (1 cement: 4 course sand),20mm thick including cost and conveyance of all materials and labour ,lead,lift,joints finished with white cement mixed with pigment of matching shade etc as directed by the Engineer in charge (colour of tiles,laying pattern etc to be got approved by the Engineer-in-Charge).
21
-
1080.39
(SH: ROOFING WORK)
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the
help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and 12.5 mm thick tapered edge gypsum moisture resistant board The rate shall include cost and conveyance of all materials, labour charges, hire charges for scaffolding etc. complete for all levels and as directed by the Engineer-in-Charge at all levels.
200
-
1644.77
15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm including mixing water proofing material in separately).proportion recommended by manufacturer over roof at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. (water proofing liquid will be paid separately)
374.466
-
398.35
Applying one coat of water thinnable cement primer of approved brand and manufacture on all surface including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
400
-
55.65
Painting the inside walls with ready mix plastic emulsion paint of approved quality two or more coats to smooth even finish on ceiling and walls including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, etc as directed by Engineer-in-Charge at all levels
4744
-
124.97
Painting with synthetic enamel paint two or more coats of approved brand on wood work of approved brand and manufactures to give an even shade including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
45
-
164.94
Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating on roof slab , gutter ,OHT,SUMP etc which shall be mixed as per manufacture's technical specification, after thoroughly cleaning the surface by mechanical means to making it free of any loose mortar,unsound substrate,"V" grooves cut along the construction joints, cracks and joints of slab/wall on the external face and the same shall be filled with polymermodified mortar( CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers), cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge.(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)
355.346
-
418.14
Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting etc. as per design and drawing. (The purchase price considered is Rs 3200/-including all taxes and any deviation plus or minus in the purchase price will be adjusted in the price quoted )
7
-
3716.8
Providing and fixing CP Towel rail 60cm of approved make including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge at all levels.
9
-
128.38
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows, unions, etc. with clamps testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer-in-charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc. complete for internal work-exposed on walls as directed by the Engineer-in-charge.
-
-
-
150mm OD(6kg/cm2)
10
-
725.04
75mm OD (4 kg/cm2)
10
-
206.72
Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge
-
-
-
150mm OD(6 kg/cm2)
70
-
815.66
110mm OD(6 kg/cm2)
224
-
438.81
75mm OD(6 kg/cm2)
8
-
294.39
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.
-
-
-
75 mm dia
1
-
24.67
110 mm dia
1
-
32.72
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work
-
-
-
20 mm nominal outer dia Pipes metre
10
-
460.13
25 mm nominal outer dia Pipes metre
10
-
545.36
32 mm nominal outer dia Pipes
10
-
655.73
40 mm nominal outer dia Pipes
7
-
829.32
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in charge -exposed
-
-
-
40 mm nominal outer dia Pipes metre
12
-
544.12
62.5 mm nominal inner dia Pipes metre
16
-
2270.15
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Internal work - Exposed on wall
-
-
-
20 mm nominal outer dia Pipes
80
-
295.81
25 mm nominal outer dia Pipes
40
-
359.08
32 mm nominal outer dia Pipes
34
-
460.6
40 mm nominal outer dia Pipes
13
-
633.23
62.5 mm nominal inner dia Pipes
168.32
-
2332.64
75 mm nominal inner dia Pipes
18
-
3246.82
100 mm nominal inner dia Pipes
18
-
4418.84
Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels
-
-
-
100 mm dia nominal bore
3
-
15719.3
80 mm dia nominal bore
2
-
2981.54
65 mm dia nominal bore
7
-
1999.11
40 mm dia nominal bore
12
-
908.94
32 mm dia nominal bore
8
-
778.53
25 mm dia nominal bore
8
-
665.75
20 mm dia nominal bore
2
-
568.93
Providing and fixing C.I. sluice valves (with cap) complete as per IS 14846 with bolts, nuts, rubber insertions including cost and conveyance of all materials etc complete as directed by the Engineer- in-Charge at all levels
Class II- 100 mm dia nominal bore PN 10
2
-
6087.43
Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge
6
-
2606.25
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer in charge in multiple nos wherever required
2500
-
11.26
Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 Cement : 4 coarse sand) R.C.C. top slab with 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete with 1:4:8 mix (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-Charge
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With bricks.Class designation 75
13
-
13206.27
Extra for depth for manholes.
Size 90 x 80 cm. With bricks.Class designation 75
2
-
8752.75
Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height,providing and filling brick bats graded, upto a height of 1.2 m,providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials,labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
1
-
25800.23
Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 50mm
4
-
2865.19
Supplying and fixing gun metal Non return valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer- in-Charge at all levels
-
-
-
40mm nominal bore- Horizontal
12
-
1061.45
50 mm nominal bore- Horizontal
1
-
1534.86
65 mm nominal bore- Horizontal
7
-
2747.13
Supplying and fixing of open well submerssible pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts, pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels
Capacity : 11.38 m3/hr, Head : 11 m
2
-
13138
Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with electric motor,DOL starter, with thermal over load,on/off push button,on/off trip indication lamp,single phase preventor base plate, foundation bolts, nuts,pressure guage and all accessories etc. suitable for operation on 415V, 3 Phase and 50 Hz A/C mounted on common channel base plate with coupling guard and cement concrete foundation with plaster as required including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels Capacity :16.67m3/hr. Head : 22m
2
-
20586
Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels Capacity :10 m3/hr., Head : 21m
2
-
16571
(PART B - ELECTRICAL WORKS)(Sl No. 130 - 183) (SH : LT PANEL BOARDS AND ACCESSORIES)(Sl No.130 - 131)
METERING BOARD Installation, testing and commissioning of energymeter box of cubicle construction made from 16SWG CRCA sheet suitable for accomodating one number of TOD meter and 3 Nos of 100A HRC fuse,100 A FP isolator and neutral link, interconnections, providing necessary supports made from the same gauge CRCA sheet to fix energymeters, etc.The cubicle shall be provided with hinged door construction and vision panel for the meter compartment. Suitable knock out for cable entry and exit shall be provided. The entire board shall be painted with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc as required including fixing it on wall, making good the damages colour washing etc. as required. (Department Supply)
1
-
2069.31
MSB PANEL
Installation, testing and commissioning of LT Switch board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP42, free standing, floor mounting, dust and vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with busbars extendable on both sides, including all the necessay internal wiring , suitable spreader etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel(required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification.(Department Supply)
Incomer
100A TPN MCCB-1 No
100A changeover switch-1 No
Busbar
100A TPN busbar chamber with Aluminium busbar Meters
4A, C curve SP MCB - 3 Nos.
RYB indication lamp, LED type - 3 Nos.
(0 to 500 )V Voltmeter for 3 phase, 4 wire operation with selector switch - 1 set
(0-100)A ammeter for 3 phase, 4 wire operation with selector switch - 1 set
100/5A 15VA class 1 resin cast CT - 3nos
Intelligent multifunction panel meter (Voltage, Current , kW, kWh, pf, Hz ) with LCD display - 1 no
Outgoings
40A, FP, C curve , 10kA MCB-3nos
63A, FP, C curve , 10kA MCB-4nos
1
-
17157.47
(SH : DG SET)(Sl No.132)
62.5kVA OUTDOOR DG SET Supply, Installation, Testing and Commissioning of outdoor 62.5KVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 62.5 KVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500RPM, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank , fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Pollution control board standards.
1
-
786132
(SH : CABLES AND CABLING)(Sl No.133 - 144) Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3.5C 70 Sq.mm Al
80
-
318.68
3.5C 35 Sq.mm Al
140
-
182.17
4C 6 sqmm Al
180
-
83.86
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3.5C 70 Sq.mm Al
4
-
593.02
3.5C 35 Sq.mm Al
6
-
419.15
4C 6 sqmm Al
8
-
172.52
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall or surface as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
100
-
37.26
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
20
-
108.67
Laying of one number PVC insulated and PVC sheathed armoured power cable of 1.1kV grade fo the following sizes in ground including excavation ,sand cushioning , providing protective covering and refilling the trench etc. as required Above 35 sq. mm and upto 95 sq. mm
40
-
313.58
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq mm
10
-
24.84
Above 35 sq. mm and upto 95 sq. mm
10
-
38.81
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
Above 35 sq. mm and upto 95 sq. mm
5
-
31.05
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
210
-
31.05
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
40mm
50
-
546.99
50 mm
50
-
698.58
100 mm
20
-
1526.01
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100 mm dia
10
-
523.16
Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required
-
-
-
300 MM WIDTH X 25 MM DEPTH X 1.6 MM THICK
20
-
524.69
150 MM WIDTH X 25 MM DEPTH X 1.6 MM THICK
30
-
463.86
Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
200
-
165.43
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
-
447.09
(SH : WIRING AND ACCESSORIES)(Sl No.145 - 157) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Note:The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item 4.4.1)
40
-
1114.62
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. (Note:The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item 4.4.1)
3
-
1195.35
Circuit wiring -Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
351.7
-
203.36
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
57.8
-
251.49
Supplying and fixing following modular switch/ socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
-
-
-
6 pin 15/16 amp socket outlet
2
-
490.56
15/16 amp switch
2
-
430.01
Telephone socket outlet
4
-
405.18
TV antenna socket outlet
2
-
403.62
Bell push
1
-
430.01
Supplying and fixing stepped type electronic fan regulator with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
25
-
698.58
Supplying and fixing call bell/ buzzer suitable for single phase,
230 volts, complete as required.
1
-
94.7
Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)
4
-
1144.33
Supply, fixing of Network point, UTP RJ45, CAT 6 modular type socket with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc as required complete.
4
-
620.27
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
100
-
82.28
25 mm
100
-
100.91
32 mm
50
-
131.95
(SH : MCBs AND MCB DISTRIBUTION BOARDS)(Sl No.158 - 165)-material supplied departmentally Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
8 way (4 + 24), Double door (Department Supply, Fixing only)
1
-
2189.27
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way (4 + 24), Double door
2
-
4886.96
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
2 + 8 way, Double door
1
-
1757.32
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required
-
-
-
4 pole 63 amps. (415 Volts),100mA sensitivity. (Departmental supply, Fixing only)
2
-
103.97
4 pole 63 amps. (415 Volts),30mA sensitivity.
1
-
7213.25
4 pole 25 amps. (415 Volts),30mA sensitivity.
2
-
5019.35
2 pole 25 amps. (415 Volts),30mA sensitivity.
1
-
3274.76
Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required.
-
-
-
6A to 32A, SP, C-CURVE
63
-
262.36
6 A to 32 A TP MCB, C-CURVE
16
-
1080.47
40 A to 63A TP MCB, C-CURVE
2
-
1833.66
Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
6
-
2015.47
Installation, testing and commissioning of DOL starter for 3ph motors of rating upto 5 HP including auxiliary contactors and all the necessary accessories as required complete. (Department Supply)
6
-
1498.25
(SH : LIGHT FIXTURES AND FANS)(Sl No.166 - 179) Supply of 1x28 W, surface mountable type slim fluorescent light fixtures, complete with all necessary accessories like instant start flicker free electronic ballast , lamp holders, prewired upto a terminal block including one number of 28 W T5 lamp, necessary accessories and connections. ( Make Philips ADRENO CLASSIC 28W TWG 207 HF or any other approved equivalent make)
-
-
-
Supply of 1x14 W, surface mountable type slim fluorescent light fixtures, complete with all necessary accessories like instant start flicker free electronic ballast , lamp holders, prewired upto a terminal block including one number of 14 W T5 lamp, necessary accessories and connections. ( Make Philips ADRENO CLASSIC 14W TWG 207 or any other approved equivalent make)
9
-
541
Supply of 2x28W, industrial , surface /ceiling mountable type fluorescent light fixture with CRCA sheet steel power coated body, 2nos 28W T5 lamps, lamp holder, electronic ballast with THD10%, PF0.98 and automatic safety shut down of lamp at the end of lamp life or lamp failure, prewired complete with all necessary accessories suitable for operation on 230V, 50Hz AC supply as required (Make:PHILIPS TMS 122M 2XTL5-28 EBT or equivalent approved make.)
5
-
1382
Supply of 2x2 LED fixture made of pressuredie cast aluminium and polycarbonate diffuser along with driver,system wattage maximum of 40 Watts,lumen output of lamp greater than 3000 lumens, power factor 0.9,rated life of L70 @ 40,000 hours, system efficacy greater than 70lumen/watt with suitable driver and including all necessary accessories as required complete.Make:-Cat No: GE MAPLE or equivalent approved make
22
-
9167
Supply of IP 65 compact fluorescent streetlight luminaire, suitable for 2x36 W CFL lamps with aluminium housing and clear acrylic diffuser installed on bracket with dia of 35/50mm with all necessary accessories and connections as required complete. ( Make : Wipro Lumino WSP 13 or any other approved equivalent makes)
5
-
1912
Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-High Speedor equivalent approved make).
43
-
1847
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make)
2
-
1396
ITC LIGHT FITTINGS AND FANS Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
13
-
141.27
Installation, testing and commissioning of LED fittings with chain and copper wiring - Installation testing and commissioning of prewired fluorescent fittings of all types including LED complete with all accessories, lamps etc. on false ceiling including supplying and fixing of GI chain and hook arrangement, upto 60cm length, and wiring using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor cable as required.
67
-
372
Installation, testing and commissioning of High bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
5
-
696.65
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
48
-
147.48
Installation, testing and commissioning of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing & commissioning etc as required.
10
-
316.69
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
197
-
40.36
(SH : EARTHING AND SAFETY EQUIPMENTS) (Sl No. 180 - 183) Earthing with C.I. earth pipe 4 metre long, 100 mm dia including accessories, and providing masonry enclosure with heavy duty CI cover plate of 300X300mm having locking arrangement and watering pipe etc. with 64kg charcoal/ coke and 5kg salt as required. (As per IS 3043 ammended uptodate)
6
-
13773.09
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
-
-
-
25mm X 6mm GI
30
-
239.39
3.15mm Cu (10 SWG)
270
-
92.6
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
25mm X 6mm GI
60
-
169
3.15mm Cu (10 SWG)
60
-
82.3
Supply and fixing of First aid box
1
-
588.69
(PART C - AIR CONDITIONING WORKS)(Sl No. 184 - 204) AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 11 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring ( from isolator), control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for single/three phase 230V/440V supply inclusive of all taxes etc complete as required by the standard technical specifications.
4
-
240000
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 8.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(from isolator), control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for single/three phase 230V/440V supply inclusive of all taxes etc complete as required by the standard technical specifications.
1
-
180000
AIR COOLED DX UNITS
Supply, installation, testing and commissioning (SITC) of 5.5 TR or higher capacity aircooled ductable split air conditioner with ceiling suspended IDU and all standard fittings, outlet volume control dampers, canvas connections, IDU SS drain pan, as per specifications complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/screw/rotary compressor, electronic microprocessor pendant controller with digital display, first charge refrigerent gas, vibration isolator pads, structural supports for fixing IDU/ ODU as shown in the drawing, safety devices including thermal protector, pressure relief valve, over load relays single phase preventor etc, power wiring(from isolator) and control cabling(indoor to outdoor),thermostat wiring, high-low pressure cut out etc. suitable for single/three phase 230V/440V supply inclusive of all taxes etc complete as required by the standard technical specifications.
1
-
121000
Supply, Installation,Testing and Commissioning of 1.0 TR or higher capacity Split air conditioning unit complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, including fixing the outdoor unit as per manufacturers recommendation and fixing of room (high wall) unit on ceiling/wall, providing copper piping interconnection with 13mm thick round nitrile rubber insulation between room & condenser as per site conditions, necessary power/control cabling, out door vibration isolators, suitable size drain pipe with 9mm thick round nitrile rubber insulation, including chasing,drilling,concealing and making good the same on walls etc.,first charge refrigerant gas, MS condenser stand, MS outdoor unit bracket, cordless remote etc complete as required. suitable for single phase 230 V supply minimum 3star rated as per BEE and with suitable stabilizer ,inclusive of all taxes etc. complete as required as per ISHRAE standards.
1
-
46018
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation as per specification for 11 TR machine between indoor & each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing,drilling,concealing and making good the same on walls etc as per site conditions with mechanical protection for piping with UV resistant paint and glass cloth etc. complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
310
-
1400
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation as per specification for 8.5 TR machine between indoor & each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing,drilling,concealing and making good the same on walls etc as per site conditions with mechanical protection for piping with UV resistant paint and glass cloth etc. complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
46
-
1400
Supply, installation, testing and commissioning of suitable sized copper refrigerant piping (both suction and liquid piping) including 19mm thick closed cell elastomeric insulation as per specification for 5.5 TR machine between indoor & each outdoor units required pipe fittings and accessories like Bends, Tees, reducers, supports, clamps including chasing,drilling,concealing and making good the same on walls etc as per site conditions with mechanical protection for piping with UV resistant paint and glass cloth etc. complete in all respect inclusive of all taxes etc complete as required by the standard technical specifications.
66
-
1250
Supply, installation, testing and commissioning CPVC drain pipe 6kg/sq.cmof suitable dia connecting the drain pan of the indoor units to nearest drain point, with 12mm thick closed cell elastomeric insulation as per specification inclusive of all taxes etc complete as required by the standard technical specifications.
151
-
180
AIR DISTRIBUTION SYSTEM
Supply, installation, testing and commissioning of fabricated at site GSS sheet metal ducting complete with neoprene gaskets, elbows, splitter dampers, vanes, hangers, supports etc.for Supply air, Return air,Exhaust Air,Fresh Air as per ducting specifications and with suitable supports using MS angles, channels, rods, anchor bolts, etc to roof /truss as per IS 655 and as per NABH/ASHRAE specifications.
-
-
-
22 G
55
-
950
24 G
530
-
850
Supply, installation, testing & commissioning of thermal insulated flexible duct of 200mm diameter with 13 mm thick insulation duly supported at regular interval as per site requirement etc. complete as required as per specifications.
16
-
641
DUCT INSULATION
Supply and fixing of External Thermal insulation on ducts with 13mm thick, 55kg/m3 density, regular closed cell nitrile rubber with anti-microbial protection class O insulation with aluminium foil facing on outside using self adhesive as per specification. Quoted price shall be inclusive of adhesive, tapes, all taxes etc.
645
-
626
ACOUSTIC INSULATION Supply and fixing of Acoustic lining inside sheet metal ducts with 10mm thick Open Cell nitrile rubber class 1,having density 140 kg/m3 insulation using manufacturers recommended adhesive, tapes etc and applications.Quoted price shall be inclusive of adhesive, tapes, all taxes etc. .
65
-
1495
Supply, fixing of acoustic lining on wall of AHU/CSU Rooms Acoustic insulation (above false ceiling) with 50mm thick, density 32 kg/cu.m resin bonded fibre glass insulation fixed in 610mm x 610 mm frame work made of 25x50x50x50x25mm made out of 0.6mm thick G.I sheet 'U' shaped channel and covered with reinforced fibre glass tissue and finished with 0.80 mm perforated aluminium sheet as per technical specifications.Quoted price shall be inclusive of adhesives, tapes, all taxes etc for complete ducting area as required by the standard technical specifications.
22
-
1000
Supply, installation, testing and commissioning (SITC) of Under-deck insulation of exposed roof using thermocol slabs of TF quality and having a thickness of 50 mm thick stuck to the roof using suitable adhesive and fastened using GI wires, washers etc. inclusive of all taxes complete as required by the standard technical specifications.
345
-
400
AIR TERMINAL DEVICES
SITC of Powder coated extruded aluminimum Supply Air Square Diffusers with aluminium dampers inclusive of all taxes etc complete as required by the standard technical specifications.
8
-
9500
SITC of Powder coated extruded aluminimum Return Air Square Diffusers inclusive of all taxes etc complete as required by the standard technical specifications.
10
-
9000
Supply, Installation, testing and balancing of Supply air grilles of extruded aluminium duly powder coated with volume control damper,fixing supports etc. inclusive of all taxes complete in all respects as required by the standard specifications.
1
-
8337
Supply, Installation, testing and balancing of Return air grilles of extruded aluminium duly powder coated without damper, fixing supports etc. inclusive of all taxes complete in all respects as required by the standard specifications.
1
-
4614
SITC of opposed type volume control dampers of 20gauge GI sheets to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distributions system as per specification inclusive of all taxes etc complete as required by the standard technical specifications.
2
-
5000
Supply, Installation , testing and commissioning of Aluminium Extruded fresh air louvers with fresh air damper, bird screen etc. inclusive of all taxes complete in all respects as required by the standard specifications
2
-
7500
Aircurtain
Supply, installation, testing and commissioning of air curtains for sliding doors of width 2.0 m (15 amps female socket will be provided by Client outside the compartment. Supplier shall draw connection from the socket to air curtain using male socket and cable) The system shall include all accessories including motors, blowers, door opening sensors etc complete in all respects inclusive of all taxes etc complete as required by the standard technical specifications.
2
-
26000
Supply, installation, testing and commissioning of electric driven pump set (Terrace pump) complete in all respect as required : Monoblock Pump rated for 450 lpm, 30m head C.I body,carbon steel shaft, C.I impeller, gland packed, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3 phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation. M.S. fabricated common base plate, foundation bolts, anti vibration pads, necessary relays, contactors, control wirting, power wiring etc. for automatic/manual operation as required. The rate must include the cost of suitable DOL starter and 1 no. MCB isolator and necessary cabling/wirings and terminations from the location of pump to the DOL Starter
1
-
39549
(SH : CABLES AND CABLING) Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3.5C 50 Sq.mm Al
5
-
345.32
3C 6 Sq.mm Al
15
-
109.63
Supplying and making end termination with brass compression gland and aluminium/Copper lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required.
-
-
-
3.5C 50 Sq.mm Al
4
-
530.92
3C 6 Sq.mm Al
2
-
167.1
Supply and laying 10 SWG copper wire on surface or in recess for loop earthing as required.
30
-
185.12
Providing and fixing 25mm X3mm copper strip on surface or in recess or in ground along the cables for connections etc. as required.
15
-
421
Providing, laying and fixing 40mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.
12
-
703
Fabrication, supply and installation of following size of ladder type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/wall with MS suspenders and painting etc as required
-
-
-
300 MM WIDTH X 50 MM DEPTH X 2 MM THICK
5
-
458
150 MM WIDTH X 50 MM DEPTH X 2 MM THICK
15
-
405
Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube and ball valve including fittings, etc. complete as required.
2
-
1463
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.
2
-
2633
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts, bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required.
-
-
-
150 mm dia
8
-
1856
100 mm dia
15
-
1278
80 mm dia
11
-
960
65 mm dia
18
-
754
50 mm dia
12
-
548
40 mm dia
10
-
434
32 mm dia
15
-
402
25 mm dia
107
-
340
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts, bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required.
150 mm dia
20
-
2226
Supply, installation, testing and commissioning of dual plate non-return valve of following sizes conforming to relevant standards (API 594) complete with cast iron/carbon steel body, disc, spring, rubber gasket, nuts, bolts, washers etc. complete as required.
-
-
-
150 mm dia
2
-
9030
100 mm dia
1
-
6785
65 mm dia
1
-
4910
50 mm dia
1
-
4135
Supply, installation, testing and commissioning of butterfly valve of following sizes having PN 16 rating, with Cast iron body, seat, disc, rubber gasket, nuts, bolts, washers conforming to IS 13095 etc. complete as required.
-
-
-
150 mm dia
2
-
10576
100 mm dia
3
-
6443
80 mm dia
1
-
4706
65 mm dia
2
-
4238
50 mm dia
4
-
3856
Supply, installation, testing and commissioning of gun metal fire hydrant valve, single headed oblique type 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to 1S:5290 complete with blank cap chain, etc
3
-
8428
Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 (b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe
3
-
8640
Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with wire, rivets etc. conforming to IS 636 (type-A) as required.
6
-
5265
Supply, installation, testing and commissioning of 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required.
3
-
2650
Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications.
3
-
4897
Supply, installation, testing and commissioning of Fire brigade collective breaching with 4 nos. of 63mm instantaneous outlets with built in check valves having 150 mm flanged out let connection etc. complete as required.
1
-
10587
Supply, installation, testing and commissioning of 25mm dia air release valve
1
-
1939
Supply, installation, testing and commissioning of sprinkler head of Standard, uright type with quartzoid bulb and having k factor =5.6 (80), chrome finish ; operating temperature at 68 deg. C.
10
-
403
(SH : PORTABLE FIRE EXTINGUISHERS) Supply and installation of ABC Dry Chemical powder type 6 Kg capacity made of Mild steel body, with opening and closing lever of squeeze grip type with Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, with Co2 Gas Cartridge as per IS: 4947 with ISI mark, complete with wall bracket. The Extinguisher will be Manufactured Strictly as per IS: 15683:2006 with ISI mark.
10
-
3809
Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas.
5
-
6607
Supply of Stored Pressure Water Co2 type Fire Extinguisher, 9 Liters capacity Fire Extinguishers pressurised by Nitrogen Gas fitted with brass valve, plastic syphon tube and discharge hose with Nozzle and Pressure Gauge to indicate pressure inside. Extinguisher is Phosphated and Epoxy powder coated internally and externally as per IS: 5 Shade No. 538 complete with wall brackets. The Extinguisher is manufactured as per IS 15683 -2006 bearing ISI Mark.
4
-
2565
(SH : FIRE DETECTION AND ALARM SYSTEM) Supply, installation, testing and commissioning of Conventional type Optical Smoke Detector (photoelectric type) complete with all accessories like base, base box etc. to be installed under/above false ceiling, roof and concealed space etc. interconnecting to cable complete as required. The detector shall be with Visible color LED and shall blink every time the detector is addressed and illuminate steady on alarm.
20
-
1387
Supply, installation, testing and commissioning of Conventional type Manual Call Point Re-setable type via special key (non-breaking glass type)complete with push button, enclosed in box with provision for cable or conduit coupling.
5
-
716
Supply, installation, testing and commissioning of wall mountable type sounder cum strobe at different locations complete for both audio and visual indication with all fixing accessories, etc. under false ceiling, roof, wall, etc, with a time delay of max 30sec.
5
-
2536
Supply, installation, testing & commissioning of conventional type, 8 zone manual operated fire alarm panel including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module etc.The panel shall have keypad operation, LCD unit to indicate fire / fault signal of individual unit, etc complete in all respects. The rate must include 24V sealed lead acid battery sufficient for 24 hrs back up with battery charger.
1
-
20140
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above ground .
300
-
139
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required.
10
-
81
(SH : SIGNAGE) Supply and installation of glow signage (photoluminescent)of "3M" Make such as Emergency Exit/Fire Exit signage etc. of standard size as per conventional design/ colour code on 3 mm thick aluminium composite panel. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc. complete work.
8
-
978
Testing and commissioning of existing 'C' class heavy duty MS pipe conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts, bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two coats of synthetic enamel paint of required shade complete as required.
-
-
-
100 mm dia
19.32
-
1278
80 mm dia
0.42
-
960
65 mm dia
4.172
-
754
50 mm dia
4.2
-
548
40 mm dia
4.2
-
434
25 mm dia
13.65
-
340
Laying and commissioning of 2 C x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above ground.
42
-
139
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements