KIIFCON Private Limited Tender

Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.

KIIFCON Private Limited Tender

Works

Eprocure

Kottayam, Kerala

Opening Date29 Apr 2024

Closing DateCancelled

Tender Amount₹ 87,68,17,450

Email

Download

Costs

EMD
₹ 5,00,000
Document Cost
₹ 17,700
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_KIIFC_672195_1
Tender No
KRL/N/GEN/MX/DOC011
Tender Authority
KIIFCON Private Limited View
Purchaser Address
-
Website
http://etenders.kerala.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-16.6 MBTendernotice_1.pdf

RFP

BOQ-2551.9 kBBOQ.xls

BOQ

BOQ-1113.4 kBAnnexure_B_BOQ_Ame...Annexure_B_BOQ_Amendments_to_Ser_No_Only.pdf

Corrigendum-5731.4 kBCorrigendum_4.pdf

Corrigendum-4718.3 kBCorrigendum_Reply_...Corrigendum_Reply_3.pdf

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Quantity856.26

Rate-

Amount -

2.26.1 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

Quantity2240.34

Rate-

Amount -

od236327/2023_2024 Carriage of available earth upto 1Km by Mechanical Transport including loading, unloading and stacking etc completed as per the Direction of Engineer in Charge

Quantity11568

Rate-

Amount -

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Quantity2008.19

Rate-

Amount -

od236036/2023_2024 Filling with contractor's own earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 30Km and lift up to 1.5 m as per direction of site Engineer-in-charge

Quantity9233.52

Rate-

Amount -

2.33.1 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

Quantity8

Rate-

Amount -

2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%

Quantity741

Rate-

Amount -

2.35.3.1 Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity8562.52

Rate-

Amount -

Foundation Works

Quantity-

Rate-

Amount -

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Quantity1033.63

Rate-

Amount -

51.2.3 Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

Quantity27.79

Rate-

Amount -

5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

Quantity4117.86

Rate-

Amount -

20.2.4 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles

Quantity5024

Rate-

Amount -

od172140/2023_2024 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and lea ds (Length of pile for payment shall be measured upto bottom of pile cap).br600 mm dia piles

Quantity7054

Rate-

Amount -

od192175/2023_2024 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).br800 mm dia piles

Quantity1121

Rate-

Amount -

od209471/2023_2024 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 900mm dia piles

Quantity96

Rate-

Amount -

20.2.6 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).750 mm dia piles

Quantity948

Rate-

Amount -

20.6.2.1 Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacityInitial tes

Quantity9

Rate-

Amount -

20.6.2.2 Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacityRoutine test

Quantity17

Rate-

Amount -

od193092/2023_2024 Providing and laying in position machine batched and machine mixed design mix M-25 grade High Performance cement concrete (HPCC) for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability, concrete Mix design proportioning as per IS : 10265 and IS: 456 as per direction of Engineerin-charge. br(Note :- Cement content considered in this item is @ 330 kg/cum. All works upto plinth levelbr

Quantity54.92

Rate-

Amount -

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Quantity3410.21

Rate-

Amount -

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Quantity682276.5

Rate-

Amount -

4.11 Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Quantity5.37

Rate-

Amount -

RCC Works - Superstructure

Quantity-

Rate-

Amount -

5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Quantity5741.33

Rate-

Amount -

5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Quantity3407.47

Rate-

Amount -

5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Quantity10093.81

Rate-

Amount -

5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Quantity4527.23

Rate-

Amount -

5.9.7 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

Quantity252.29

Rate-

Amount -

5.9.16.1 Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

Quantity1307.85

Rate-

Amount -

5.34.1 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).

Quantity299.7

Rate-

Amount -

5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V leve

Quantity1366.84

Rate-

Amount -

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or mor

Quantity256895.76

Rate-

Amount -

22.4.2 Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Dumb bell with ventral bulb ( 180 mm wide, 8 mm thick)

Quantity197.2

Rate-

Amount -

5.38 Extra for R.C.C. /B.M.C/R.M.C. work above floor V level for each four floors or part thereof

Quantity309.21

Rate-

Amount -

Block work

Quantity-

Rate-

Amount -

50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Quantity679.44

Rate-

Amount -

50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

Quantity115.55

Rate-

Amount -

od174111/2023_2024 Providing Weather Resistant and Termite Proof Teracotta clay jali of size 200x200x63mm including plastering of the jambs, sills and soffits etc complete as per the Direction of Engineer in Charge

Quantity85.44

Rate-

Amount -

6.15 Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.

Quantity476.17

Rate-

Amount -

50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Quantity24.18

Rate-

Amount -

6.30.2 Brick work with common burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Above plinth level and upto floor V level

Quantity56

Rate-

Amount -

od7449/2024_2025 Providing and laying autoclaved aerated cement blocks masonry with 200mm thick AAC blocks in super structure above plinth level up to terrace floor level ie, floor VIII level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately)

Quantity651.5

Rate-

Amount -

od7450/2024_2025 Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to terrace level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonrybrwor

Quantity74.76

Rate-

Amount -

FINISHING WORKS

Quantity-

Rate-

Amount -

13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

Quantity4898.91

Rate-

Amount -

13.4.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

Quantity6433.5

Rate-

Amount -

13.16.1 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

Quantity6192.4

Rate-

Amount -

13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level:In two coats

Quantity18.09

Rate-

Amount -

13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

Quantity913.7

Rate-

Amount -

13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

Quantity15158.74

Rate-

Amount -

13.45.1 Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Quantity4305.89

Rate-

Amount -

13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Quantity15821.07

Rate-

Amount -

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Quantity1726.59

Rate-

Amount -

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity9480.63

Rate-

Amount -

12.53 Providing and Fixing 15 mm densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone /cosmos /Hexa or equivalent of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' of size 24 x 28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require. Main 'T' runners to be suspended from ceiling using G.I slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size of 85x30x0.8 mm, spaced at 1200mm centre to centre along main 'T' bottom exposed with 24 mm of all T- sections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by by engineer-in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. value of 0.50 (Minimum), light reflection 85% non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity

Quantity170.24

Rate-

Amount -

22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Quantity368.62

Rate-

Amount -

od262369/2023_2024 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (For the purpose of measurement the entire treated surface will be measured)

Quantity2321.37

Rate-

Amount -

9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm allcomplete.With 12 mm mild steel U beading

Quantity757.5

Rate-

Amount -

22.23.1 Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For vertical surface two coats @0.70 kg per sqm

Quantity2058.52

Rate-

Amount -

22.23.2 Providing and applying integral crystalline slurry of hydrophilic in nature forwaterproofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducingpermeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against anyleakage.For horizontal surface one coat @1.10 kg per sqm

Quantity804.74

Rate-

Amount -

od7494/2024_2025 Renaplaster-ready mix plaster for AAC block confirming to IS 1661 for interior and exterior walls of thickness 10mm including surface preparation etc. compete all complete as per manufacturers specification and direction of Engineer-in-charge

Quantity7918.7

Rate-

Amount -

JOINERY

Quantity-

Rate-

Amount -

9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

Quantity2745.52

Rate-

Amount -

21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

Quantity6809.99

Rate-

Amount -

21.1.2.1 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

Quantity6686.81

Rate-

Amount -

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness

Quantity448.27

Rate-

Amount -

21.3.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

Quantity318.93

Rate-

Amount -

9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity151.83

Rate-

Amount -

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame

Quantity460

Rate-

Amount -

9.122.1 Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames

Quantity194.89

Rate-

Amount -

9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Quantity108

Rate-

Amount -

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Quantity81

Rate-

Amount -

9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm

Quantity173

Rate-

Amount -

9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:100x10 mm

Quantity386

Rate-

Amount -

9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Quantity158

Rate-

Amount -

9.102 Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Quantity457

Rate-

Amount -

9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete

Quantity120

Rate-

Amount -

10.26.3 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipe

Quantity1886.64

Rate-

Amount -

10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wiresprings manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

Quantity174.55

Rate-

Amount -

10.7 Providing and fixing ball bearing for rolling shutters

Quantity13

Rate-

Amount -

10.8.1 Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area

Quantity145.15

Rate-

Amount -

10.25.1 Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

Quantity4299

Rate-

Amount -

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Quantity15075.4

Rate-

Amount -

50.12.2.3 Providing & fixing poly carbonate multi wall plain sheet 5 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required

Quantity160

Rate-

Amount -

9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

Quantity2.77

Rate-

Amount -

9.97.4 150x10 mm

Quantity94

Rate-

Amount -

od7499/2024_2025 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass s of approved colour and shade held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick for all heights and all levels,. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. All complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge.

Quantity68.82

Rate-

Amount -

od7502/2024_2025 Providing and fixing Automatic sensor door system having opening 3600X2400 mm, double sliding with 12mm toughened glass, DC 24V 60W herical gear motor, 55-60 DB noise level, built in motor lock, 50mm bush profile, soft nose seal etc complete all as per the manufacto'rs specification

Quantity1

Rate-

Amount -

FLOORING

Quantity-

Rate-

Amount -

11.41.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm

Quantity4089.46

Rate-

Amount -

11.48.3 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 800x800mm

Quantity4089.46

Rate-

Amount -

11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

Quantity6912.32

Rate-

Amount -

od186035/2023_2024 Providing and laying Antiskid Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.br(Rate of tile Rs.50/sqft)(Data Based on 11.37)

Quantity413.64

Rate-

Amount -

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete

Quantity1594.36

Rate-

Amount -

11.55.1 Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all completeas per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with cement slurry and pointing with white cement slurry admixed withpigment of matching shade including rubbing, curing and polishing etc. allcomplete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

Quantity38.99

Rate-

Amount -

11.56.1 Providing and laying Polished Granite stone flooring in required design andpatterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withcement slurry and pointing with white cement slurry admixed with pigment ofmatching shade including rubbing , curing and polishing etc. all complete asspecified and as directed by the Engineer-inCharge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Quantity169.16

Rate-

Amount -

8.5 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Quantity31.95

Rate-

Amount -

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

Quantity261.31

Rate-

Amount -

Sanitary Installations

Quantity-

Rate-

Amount -

17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Quantity13

Rate-

Amount -

17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe32 mm dia

Quantity136

Rate-

Amount -

17.32.3 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)

Quantity49

Rate-

Amount -

17.32.4 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Quantity17

Rate-

Amount -

50.17.1.3 Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials andlabour charges etc complete as per the direction of site Engineer-in-charge.

Quantity55

Rate-

Amount -

50.17.1.1 Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etccomplete as per the direction of site Engineer-in-charge.

Quantity74

Rate-

Amount -

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Quantity85

Rate-

Amount -

od210399/2023_2024 Providing and fixing C.P. brass twin robe hooks

Quantity85

Rate-

Amount -

od210401/2023_2024 Supply and fixing stainless steel cockroach trap for 110mm dia floor trap

Quantity136

Rate-

Amount -

17.10.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 178 mm

Quantity12

Rate-

Amount -

17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap.

Quantity35

Rate-

Amount -

8.10.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.White Agaria Marble Stone

Quantity4.13

Rate-

Amount -

od216251/2023_2024 Providing and fixing wash basin with single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including cutting and making good the walls wherever required:brProduct Details :Sanitary ware -Angle back wash basin without pedestal-Angle back wash basin 400 x 400 x195 mm

Quantity13

Rate-

Amount -

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Quantity103

Rate-

Amount -

19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20x20 mm square bar

Quantity255

Rate-

Amount -

17.10.2.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm

Quantity2

Rate-

Amount -

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Quantity2000

Rate-

Amount -

10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.)

Quantity15

Rate-

Amount -

od273288/2023_2024 Providing and fixing C.P Waste Coupling for wash basin, urinal and sink, of approved quality and colou

Quantity138

Rate-

Amount -

od273401/2023_2024 supply and fixing 110 mm PVC multi floor trap

Quantity138

Rate-

Amount -

od273402/2023_2024 Providing and fixing of Counter wash basins 460 x 345 x 160 mm -: Counter wash basin(size 460 x 345 x160 mm) with single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern-including cutting and making good the walls wherever required. Mini under counter oval wash basin- 460 x 345 x 160 mm

Quantity57

Rate-

Amount -

od274692/2023_2024 Providing and fixing CP Urinal Push Cock of approved quality.brSELF CLOSING ANGLE COCK-Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe

Quantity13

Rate-

Amount -

od274693/2023_2024 Providing and fixing wash basin with single 15 mm C.P. heavy, best quality brass pillar tap, 32 mm C.P. brass waste of standard pattern, including fixing with rack bolts cutting and making good the walls wherever required: Product Details : Sanitary ware -Wall hung wash basins without pedestal-Wall hung wash basins 405 x 325 x 145 mm

Quantity41

Rate-

Amount -

od275001/2023_2024 Providing and fixing C.P. brass shower rose with long shower arm:br100 mm diameterbrMaximum Flow rate or capacity: 10LPM brduration :8 minutesbrDaily uses per person/day :1

Quantity57

Rate-

Amount -

od275236/2023_2024 Providing and fixing sink cock (wall mounted) of approved quality conforming to IS: 8931br15 mm nominal bore

Quantity14

Rate-

Amount -

od275237/2023_2024 Providing and fixing C.P. brass angle valve for sink, health faucet, wash basin, EWC cistern etc. of approved quality conforming to IS: 8931br15 mm nominal bore

Quantity295

Rate-

Amount -

18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore

Quantity98

Rate-

Amount -

od276310/2023_2024 Providing and fixing Gun meta ball valve 40mm

Quantity24

Rate-

Amount -

od276311/2023_2024 Providing and fixing Gun metal ball valve 65mm of approved quality

Quantity24

Rate-

Amount -

od276312/2023_2024 Providing and fixing Gun metal ball valve size 32 mm, of approved quality

Quantity48

Rate-

Amount -

od276313/2023_2024 Providing and fixing Gun metal ball valve 50mm of approved quality

Quantity24

Rate-

Amount -

od276314/2023_2024 Providing and fixing Gun Metal Ball Valve, Size 25mm of approved quality

Quantity85

Rate-

Amount -

od279147/2023_2024 Providing and fixing floor mounted, white vitreous china single piece,wash down water closet of approved brand/make, shape, size and patternbrincluding integrated white vitreous china cistern of capacity 10 litres with dualbrflushing system, including all fittings and fixtures with seat cover, cistern fittings,brnuts, bolts and gasket etc including making connection with the existing P/Sbrtrap, complete in all respect as per directions of Engineer-in-Charge.brMaximum flow rate:6LPF, Duration : 1Flush, Daily Uses per person/Day:1

Quantity85

Rate-

Amount -

od279181/2023_2024 Providing and fixing 80mm dia puddle flanges of suitable length fabricated out of G.I pipe heavy duty welded to 6mm M.S plates along with flanges of suitable size hot dip galvanized properly fixed in walls and top slabs of underground and overhead tanks.

Quantity8

Rate-

Amount -

od279182/2023_2024 Providing and fixing 65mm dia puddle flanges of suitable length fabricated out of G.I pipe heavy duty welded to 6mm thick M.S plates along with flanges of suitable size hot dip galvanized properly fixed in walls and top slabs of underground and overhead tanks

Quantity8

Rate-

Amount -

od279183/2023_2024 Providing and fixing 40mm dia puddle flanges of suitable length fabricated out of G.I. pipe heavy duty welded to 6mm thick M.S. plates along with flanges of suitable size hot dip galvanized properly fixed in walls and top slabs of underground and overhead tanks

Quantity30

Rate-

Amount -

od279184/2023_2024 Providing and fixing 32mm dia puddle flanges of suitable length fabricated out of G.I. pipe heavy duty welded to 6mm thick M.S. plates along with flanges of suitable size hot dip galvanized properly fixed in walls and top slabs of underground and overhead tanks

Quantity22

Rate-

Amount -

od279185/2023_2024 Providing and fixing 50mm dia puddle flanges of suitable length fabricated out of G.I. pipe heavy duty welded to 6mm thick M.S. plates along with flanges of suitable size hot dip galvanized properly fixed in walls and top slabs of underground and overhead tanks

Quantity18

Rate-

Amount -

od279186/2023_2024 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :br80 mm nominal bore

Quantity8

Rate-

Amount -

od279187/2023_2024 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :br65 mm nominal bore

Quantity8

Rate-

Amount -

od279362/2023_2024 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931br20 mm nominal bore

Quantity13

Rate-

Amount -

17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality& make as approved by Engineer in charge.(a) 15 mm nominal dia

Quantity39

Rate-

Amount -

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Quantity39

Rate-

Amount -

Water supply

Quantity-

Rate-

Amount -

18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes

Quantity192

Rate-

Amount -

18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

Quantity200

Rate-

Amount -

18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

Quantity177

Rate-

Amount -

18.7.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipe

Quantity54

Rate-

Amount -

18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

Quantity528

Rate-

Amount -

18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

Quantity494

Rate-

Amount -

18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

Quantity124

Rate-

Amount -

18.9.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work - 50mm nominal outer dia pipes

Quantity260

Rate-

Amount -

18.9.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes

Quantity165

Rate-

Amount -

18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Quantity20

Rate-

Amount -

18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

Quantity20

Rate-

Amount -

18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

Quantity10

Rate-

Amount -

18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Quantity8

Rate-

Amount -

18.75.2 Providing and fixing PTMT extension nipple for water thank pipe, fittings of approved quality and colour .20 mm nominal bore, weighing not less than 40 gms

Quantity4

Rate-

Amount -

18.75.3 Providing and fixing PTMT extension nipple for water thank pipe, fittings of approved quality and colour .25 mm nominal bore, weighing not less than 62 gm

Quantity4

Rate-

Amount -

18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes

Quantity168

Rate-

Amount -

18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work20 mm nominal outer dia pipes

Quantity60

Rate-

Amount -

od275182/2023_2024 Supplying and fixing 8mm anchor fastener for fixing threaded rod in position

Quantity255

Rate-

Amount -

od275183/2023_2024 Supplying and fixing 10mm anchor fastener for fixing threaded rod in position

Quantity255

Rate-

Amount -

od275184/2023_2024 Supplying and fixing of heavy duty slotted rail, full threaded rod, U bolts, universal clamps, nuts and washers for clamping pipes, floor traps etc in ducts and below ceiling.

Quantity255

Rate-

Amount -

Drainage

Quantity-

Rate-

Amount -

50.18.7.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wa

Quantity126

Rate-

Amount -

50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

Quantity268

Rate-

Amount -

50.18.8.8.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.75 mm pipe 6 Kgf/cm2

Quantity226

Rate-

Amount -

50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

Quantity418

Rate-

Amount -

50.18.9.8.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

Quantity222

Rate-

Amount -

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

Quantity550

Rate-

Amount -

50.18.9.16.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

Quantity102

Rate-

Amount -

50.18.9.21.7 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

Quantity63

Rate-

Amount -

50.18.9.22.8 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cow

Quantity10

Rate-

Amount -

19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity37

Rate-

Amount -

19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity1

Rate-

Amount -

19.7.1.2 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With Sewer bricks conforming to IS : 4885

Quantity66

Rate-

Amount -

50.18.9.10.1 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

Quantity144

Rate-

Amount -

18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proo

Quantity39

Rate-

Amount -

19.18.3 Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg

Quantity10

Rate-

Amount -

19.33 Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Quantity1

Rate-

Amount -

od279331/2023_2024 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

Quantity178

Rate-

Amount -

od279367/2023_2024 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wal

Quantity178

Rate-

Amount -

19.7.2.2 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With Sewer bricks conforming to IS : 4885

Quantity2

Rate-

Amount -

Rain water

Quantity-

Rate-

Amount -

od277248/2023_2024 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 4 Kgf/cm2 - External work- Exposed on wall

Quantity352

Rate-

Amount -

od277270/2023_2024 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 160 mm dia 4 Kgf/cm2 - External work- Exposed on wa

Quantity60

Rate-

Amount -

od279548/2023_2024 Constructing masonry shoe to the bottom of the rain water pipes with brick in cement mortar 1:6 over CC 1:4:8 using 40mm metal concrete, plastering the exposed surfaces using CM 1:5 one coat, forming the circular spout outlet, finishing etc. complete

Quantity78

Rate-

Amount -

12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams

Quantity46

Rate-

Amount -

Pre-Engineered Building

Quantity-

Rate-

Amount -

od294692/2023_2024 Design, fabrication, supply and erection of Pre-Engineered building structure as per the following details. WARE HOUSE - 29.0x24.5x 8.85m(ridge height) Structural steel: Structural steel work riveted bolted or welded including cutting hoisting fixing in position for all types of structural steel works viz. columns, trusses, purlins, bracing etc. made up of built up or rolled sections with moment or shear connections, including all accessories viz. Nuts, bolts, cleats, gussets, suspenders etc as per design ,specification complete as directed by Engineer in charge. Finishing with polyurethene paint as per manufactures specification to give an even shade- Two or more coats on new work including surface preparation and epoxy based primer (two coats) etc complete.brWall & Roofing: Providing and fixing 80 mm thick prefabricated PUF sandwich panel for side paneling (size, shape and colour as approved by Engineer-incharge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-inCharge. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Necessary openings shall be provided. bra) Providing and fixing 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion on wall face. brTurbo Vent (minimum 1100 CFM) (14nos): Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ball-bearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self-lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height 18". brAluminium Louver 450x450mm (12nos): Weather resistant louver with horizontal drainable blades and size of 450mm x 450mm . Louvers are designed to prevent rain penetration. Mist eliminator of vertical blade at rear side may be considered for minimizing water penetration and wind driven rain . Louver shall be supplied with 50% free area and with bird screen.brnote: The whole work shall include of all labour, equipments, materials, cost of consumables, fasteners, washers, scaffolding, etc complete in all respect as directed by Engineer-in-charge. br

Quantity625

Rate-

Amount -

od294725/2023_2024 Design, fabrication, supply and erection of PEB structure as per the following details. Tyre testing - 40x30x10.20m(ridge height)brStructural steel: Structural steel work riveted bolted or welded including cutting hoisting fixing in position for all types of structural steel works viz. columns, trusses, purlins, bracing etc. made up of built up or rolled sections with moment or shear connections, including all accessories viz. Nuts, bolts, cleats, gussets, suspenders etc as per design ,specification complete as directed by Engineer in charge. Finishing with polyurethene paint as per manufactures specification to give an even shade- Two or more coats on new work including surface preparation and epoxy based primer (two coats) etc complete.brWall & Roofing: Providing and fixing 80 mm thick pre-fabricated PUF sandwich panel for side paneling (size, shape and colour as approved by Engineer-in-charge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-inCharge. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Necessary openings shall be provided. bra) Providing and fixing 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion on wall face. brTurbo Vent (minimum 1100 CFM) (28nos): Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ballbearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self-lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height 18". brAluminium Louver 600x600mm (12nos): Weather resistant louver with horizontal drainable blades and size of 1200x600mm . Louvers are designed to prevent rain penetration. Mist eliminator of vertical blade at rear side may be considered for minimizing water penetration and wind driven rain . Louver shall be supplied with 50% free area and with bird screen.brnote: The whole work shall include of all labour, equipments, materials, cost of consumables, fasteners, washers, scaffolding, etc complete in all respect as directed by Engineer-in-charge.

Quantity1350

Rate-

Amount -

od294726/2023_2024 Design, fabrication, supply and erection of PEB structure as per the following details. Sterilization Unit40x30x11.60m(ridge height)brStructural steel: Structural steel work riveted bolted or welded including cutting hoisting fixing in position for all types of structural steel works viz. columns, trusses, purlins, bracing etc. made up of built up or rolled sections with moment or shear connections, including all accessories viz. Nuts, bolts, cleats, gussets, suspenders etc as per design ,specification complete as directed by Engineer in charge. Finishing with polyurethene paint as per manufactures specification to give an even shade- Two or more coats on new work including surface preparation and epoxy based primer (two coats) etc complete.brWall & Roofing: Providing and fixing 80 mm thick pre-fabricated PUF sandwich panel for side paneling (size, shape and colour as approved by Engineer-in-charge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-inCharge. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Necessary openings shall be provided. bra) Providing and fixing 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion on wall face. brTurbo Vent (minimum 1100 CFM) (28nos): Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ballbearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self-lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height 18". brAluminium Louver 600x600mm (12nos): Weather resistant louver with horizontal drainable blades and size of 1200x600mm . Louvers are designed to prevent rain penetration. Mist eliminator of vertical blade at rear side may be considered for minimizing water penetration and wind driven rain . Louver shall be supplied with 50% free area and with bird screen.brnote: The whole work shall include of all labour, equipments, materials, cost of consumables, fasteners, washers, scaffolding, etc complete in all respect as directed by Engineer-in-charge.

Quantity1160

Rate-

Amount -

od294727/2023_2024 Design, fabrication, supply and erection of PEB structure as per the following details. Tool room - 24x20 x9.70m(ridge height)brStructural steel: Structural steel work riveted bolted or welded including cutting hoisting fixing in position for all types of structural steel works viz. columns, trusses, purlins, bracing etc. made up of built up or rolled sections with moment or shear connections, including all accessories viz. Nuts, bolts, cleats, gussets, suspenders etc as per design ,specification complete as directed by Engineer in charge. Finishing with polyurethene paint as per manufactures specification to give an even shade- Two or more coats on new work including surface preparation and epoxy based primer (two coats) etc complete.brWall & Roofing: Providing and fixing 80 mm thick pre-fabricated PUF sandwich panel for side paneling (size, shape and colour as approved by Engineer-in-charge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-inCharge. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Necessary openings shall be provided. bra) Providing and fixing 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion on wall face. brTurbo Vent (minimum 1100 CFM) (12nos): Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ball-bearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self-lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height 18". brAluminium Louver 450x450mm (9nos): Weather resistant louver with horizontal drainable blades and size of 1200x600mm . Louvers are designed to prevent rain penetration. Mist eliminator of vertical blade at rear side may be considered for minimizing water penetration and wind driven rain . Louver shall be supplied with 50% free area and with bird screen.brnote: The whole work shall include of all labour, equipments, materials,cost of consumables, fasteners, washers, scaffolding, etc complete in all respect as directed by Engineerin-charge. br

Quantity695

Rate-

Amount -

od294731/2023_2024 Design, fabrication, supply and erection of PEB structure as per the following details. Tyre powdering Unit- 109x25.80x11.60m(ridge height) Structural steel: Structural steel work riveted bolted or welded including cutting hoisting fixing in position for all types of structural steel works viz. columns, trusses, purlins, bracing etc. made up of built up or rolled sections with moment or shear connections, including all accessories viz. Nuts, bolts, cleats, gussets, suspenders etc as per design ,specification complete as directed by Engineer in charge. Finishing with polyurethene paint as per manufactures specification to give an even shade- Two or more coats on new work including surface preparation and epoxy based primer (two coats) etc complete.brWall & Roofing: Providing and fixing 80 mm thick pre-fabricated PUF sandwich panel for side paneling (size, shape and colour as approved by Engineer-in-charge) including all cost of conveyance and labour charges etc as specified and as directed by the Engineer-inCharge. The sheet shall be fixed using self drilling/self tapping screws and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Necessary openings shall be provided. bra) Providing and fixing 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion on wall face. brTurbo Vent (minimum 1100 CFM) (94nos): Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ballbearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self-lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height 18". brAluminium Louver 1200x600mm (18nos): Weather resistant louver with horizontal drainable blades and size of 1200x600mm . Louvers are designed to prevent rain penetration. Mist eliminator of vertical blade at rear side may be considered for minimizing water penetration and wind driven rain . Louver shall be supplied with 50% free area and with bird screen.brnote: The whole work shall include of all labour, equipments, materials, cost of consumables, fasteners, washers, scaffolding, etc complete in all respect as directed by Engineer-in-charge. br

Quantity3959

Rate-

Amount -

Weigh Bridge

Quantity-

Rate-

Amount -

od279392/2023_2024 Providing Weigh Bridge system using High Tensile steel of approved model , capacity 60T, accuracy upto 10kg, pit-less type, having platform structure of size with 18mx3m, with 10 modules and each module shall be seal welded including top plate 12 mm thick,main beams ISMB 450 cross beam ISMB 250. Depth of each module shall be 258 mm and width shall be 1500 mm, structure fabricated using High tensile plates of grade IS: 2062:2006 E 410/BSK 46 steel having min yield strength of 410 Mpa . Load cells of Double Ended Shear Beam of Capacity 30 T each and Number of load cells 10 nos having warranty up to two years or more as per the direction of Dept. officers at site including unloading and erection.brbrSupplying and Installing 1 no. Computer with CPU i7 processor, 8 GB RAM, 1 TB hard disk, 18.5'LED monitor, USB 101 keyboard, USB mouse with scrolling with OS Windows 10 or higher of made HP/Dell/Equivalent along with computer table, Printer Laser Jet A4 sized colour print, supporting OS with Windows 10 or higher of approved made HP/Samsung/Canon/Epson,1kV single phase UPS APCbrmadehaving 85%efficiency, maintenance free tubular battery, min. 3 no. of o/p plug points with a back up of 30 minutes or more having warranty upto two years or more as directed by the Dept. officers in charge. brSupplying, installing and Configuration of Integrated software and hardware for monitoring on the cloud and to manage remotely over the internet with storage upto 20,000 records, Direct print without computer, Graphical LCD Display and should be a Multi user software, Compatible to SAP and ERP, Master database for tare weight etc complete having warranty upto two years or more as directed by the Engineer in charge

Quantity1

Rate-

Amount -

od282649/2023_2024 Providing Weigh Bridge system using High Tensile steel of approved model , capacity 100T, accuracy upto 20kg, pit-less type, having platform structure of size with 18mx3m, with 8 modules and each module shall be seal welded including top plate 12 mm thick,main beams ISMB 450 cross beam ISMB 250. Depth of each module shall be 258 mm and width shall be 1500 mm, structure fabricated using High tensile plates of grade IS: 2062:2006 E 410/BSK 46 steel having min yield strength of 410 Mpa . Load cells of Double Ended Shear Beam of Capacity 30 T each and Number of load cells 8 nos having warranty up to two years or more etc complete including unloading and erection. brSupplying and Installing 1 no. Computer with CPU i7 processor, 8 GB RAM, 1 TB hard disk, 18.5'LED monitor, USB 101 keyboard, USB mouse with scrolling with OS Windows 10 or higher of made HP/Dell/Equivalent along with computer table, Printer Laser Jet A4 sized colour print, supporting OS with Windows 10 or higher of approved made HP/Samsung/Canon/Epson,1kV single phase UPS APC made having 85%efficiency, maintenance free tubular battery, min. 3 no. of o/p plug points with a back up of 30 minutes or more having warranty upto two years or more. brSupplying, installing and Configuration of Integrated software and hardware for monitoring on the cloud and to manage remotely over the internet with storage upto 20,000 records, Direct print withoutbrcomputer, Graphical LCD Display and should be a Multi user software, Compatible to SAP and ERP, Master database for tare weight etc complete having warranty upto two years or more

Quantity1

Rate-

Amount -

Miscellaneous

Quantity-

Rate-

Amount -

30.2.4.1 Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm

Quantity71.6

Rate-

Amount -

30.2.10.2 Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).With grass Turf

Quantity167

Rate-

Amount -

30.2.28 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Quantity26.94

Rate-

Amount -

30.2.10.1 Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions

Quantity167

Rate-

Amount -

30.2.34 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, with sprinkler and maintenance for 30 days or more till the grass established properly as per direction of officer in charge.

Quantity215

Rate-

Amount -

30.2.57.3 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Hedge plants (for 300 nos.=427.45/300)

Quantity100

Rate-

Amount -

30.2.57.1 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100

Quantity50

Rate-

Amount -

30.2.57.2 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s asper direction of officer in charge (excluding cast of plant & water )Cost of plantation per Shrubs plants (for 200 nos.=427.45/200)

Quantity50

Rate-

Amount -

od308106/2023_2024 Providing and displaying Fycus panda well developed with fresh and healthy bushy plant of height 15cm to 30cm as per the Direction of Engineer In Charge

Quantity100

Rate-

Amount -

od308107/2023_2024 Providing and displaying Spider Lilly plant with fresh and health bushy plant with height of 15cm to 30cm as per the Direction of Engineer in Charge

Quantity150

Rate-

Amount -

od308109/2023_2024 Providing and displaying Ixora plant well developed with fresh and health bushy plant of height 15 cm to 30cm as per the direction of Engineer in Charge

Quantity150

Rate-

Amount -

Boundry Wall works

Quantity-

Rate-

Amount -

20.3.2 Boring, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M -25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap):400 mm dia piles

Quantity911

Rate-

Amount -

50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-char

Quantity2391.3

Rate-

Amount -

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Quantity100

Rate-

Amount -

50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Quantity199.8

Rate-

Amount -

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity2303.85

Rate-

Amount -

od295444/2023_2024 Installation of precast slabs - fixing of precast reinforced cement concrete slab above plinth level up to floor five level in cement mortar 1:3 (1 cement: 3 coarse sand), including cost of hoisting, Transporting and setting in position etc complete as per direction of Engineer in Charge

Quantity49.37

Rate-

Amount -

13.8 Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V : 20H towards drawing foce.Complete as per drawing and Technical Specifications

Quantity1108

Rate-

Amount -

13.4.2 12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand

Quantity885.6

Rate-

Amount -

LAND DEVELOPMENT

Quantity-

Rate-

Amount -

od294711/2023_2024 Filling with Contractor's own earth (excluding rock) in open areas in layers not exceeding 20cm in depth, consolidating each deposited layer, graded and compacted to required slope, with lead and lift as per direction of site Engineer - in - charge.

Quantity210000

Rate-

Amount -

od13932/2024_2025 Excavation of previously deposited surcharge soil with hydraulic excavator including cutting and transporting to the filling location within the periphery of site, graded and compacted as specified by Engineer-in-charge

Quantity25740

Rate-

Amount -

od14281/2024_2025 Reuse of available earth obtained from deepening proposed waterfront for land development in open areas in layers, graded and compacted to meet requirements as specified by the Engineer in charge

Quantity52670.4

Rate-

Amount -

ROAD DEVELOPMENT

Quantity-

Rate-

Amount -

3.6. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000.

Quantity10752.53

Rate-

Amount -

3.18 : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Quantity5380.25

Rate-

Amount -

4.1.B.1 : Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer

Quantity1614.08

Rate-

Amount -

4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Quantity2690.13

Rate-

Amount -

5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means

Quantity7800

Rate-

Amount -

5.2.c : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Quantity15600

Rate-

Amount -

5.4.2.b : Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG 30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.For grading - II (26.5 mm nominal size)

Quantity468

Rate-

Amount -

5.6.2.b. Providing and laying bituminous concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (NRMB) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects For Grading -II (13.2 mm Nominal size).

Quantity234

Rate-

Amount -

55.22 : Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.complete

Quantity2960.5

Rate-

Amount -

GROUND IMPROVEMENT

Quantity-

Rate-

Amount -

od16685/2024_2025 Construction of Surcharge with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Quantity42900

Rate-

Amount -

OD: Supplying and fixing Flexible Prefabricated Vertical Drain consisting of high strength high permeability synthetic filter fabric surrounding a fluted core for water drainage @ 1.0 metre equilateral triangle spacing on entire plan area of the road alignment where stabilisation of soil proposed in the soil investigation report and embankment design

Quantity165123

Rate-

Amount -

od15843/2024_2025 Providing and laying in position 20-40mm nominal sized aggregate to filter out water from PVD as per drawing and technical specification as directed by Engineer-in-charge.

Quantity4290

Rate-

Amount -

od374972/2023_2024 Providing, laying in position,Non-Woven Geotextile - all works as per the directions of Engineer-in charge.

Quantity15015

Rate-

Amount -

WATER FRONT DEVELOPMENT

Quantity-

Rate-

Amount -

od14218/2024_2025 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansbrover proposed waterfront areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) transporting with all lead and lift to the filling location, disposed earth to be levelled, neatly dressed, graded and compacted within the periphery of site, specified by Engineer-in-charge

Quantity87784

Rate-

Amount -

OD: Construction of earthen bund with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2

Quantity15135

Rate-

Amount -

OD: Construction of central clay core with approved material preventing seepage through the bund minimising the piping damages as approved by site Engineer in charge

Quantity2145

Rate-

Amount -

15.5 Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification

Quantity1800

Rate-

Amount -

od15753/2024_2025 Dry stone pitching including supply of stones and preparing surface complete as approved by Engineer in charge.

Quantity12000

Rate-

Amount -

12.1.B.1: Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means

Quantity270

Rate-

Amount -

9.2.B. Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 1200 mm dia

Quantity45

Rate-

Amount -

UTILITY CORRIDOR & DRAIN

Quantity-

Rate-

Amount -

OD : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

Quantity59.15

Rate-

Amount -

12.8.A : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M15 (Without formwork)

Quantity1018.04

Rate-

Amount -

13.5.B: Plain/Reinforced Cement Concrete in sub-structure complete as per drawing and Technical Specifications PCC Grade M20 - Height upto 5m

Quantity15

Rate-

Amount -

3.13.1.B: Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Ordinary soil - Mechanical Means - (Depth upto 3 m)

Quantity4104.2

Rate-

Amount -

12.8.E.2.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump

Quantity309.85

Rate-

Amount -

OD: Constructing, placing and jointing precast RCC M25 drain/Utility Trench of size as per drawing over a bed of 100 mm thick quarry sand including conveying erecting etc complete.

Quantity277.88

Rate-

Amount -

13.5.F.P.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump - Height upto 5m

Quantity396

Rate-

Amount -

14.1B.2.1.A: Furnishing and Placing Reinforced Cement Concrete Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specification. For solid slab super-structure - Height upto 5m

Quantity329.25

Rate-

Amount -

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

Quantity30.99

Rate-

Amount -

13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

Quantity80.87

Rate-

Amount -

14.2: Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications

Quantity39.51

Rate-

Amount -

OD: Providing and laying 60mm thick factory made cement concrete interlocking paver block of M30 grade block by machine with strong vibratory compaction of approved size, design and shape, laid in concrete color and pattern over and including and 50mm thick compacted bed of coarse sand, filling joints with fine sand etc as per the direction of engineers in charge.

Quantity1430

Rate-

Amount -

OTHER APPURTENANCES

Quantity-

Rate-

Amount -

50.18.9.19.1. Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

Quantity1500

Rate-

Amount -

OD/CPWD/12.44 : Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Quantity500

Rate-

Amount -

ROAD FURNITURES

Quantity-

Rate-

Amount -

8.13 : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes.

Quantity320

Rate-

Amount -

8.35 : Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

Quantity674

Rate-

Amount -

ELECTRICAL WORKS

Quantity-

Rate-

Amount -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Quantity1305

Rate-

Amount -

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Quantity104

Rate-

Amount -

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Quantity743

Rate-

Amount -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity16022

Rate-

Amount -

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity11315

Rate-

Amount -

2 x 4 sq.mm +1 x 4 sq.mm earth wire

Quantity7911

Rate-

Amount -

2 x 6sq.mm +1 x 6 sq.mm earth wire

Quantity244

Rate-

Amount -

2 x 10 sq.mm +1 x 6 sq.mm earth wire

Quantity150

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Quantity-

Rate-

Amount -

3 x 1.5 sq. mm

Quantity14492

Rate-

Amount -

3 x 2.5 sq. mm

Quantity10864

Rate-

Amount -

3 x 4 sq. mm

Quantity7538

Rate-

Amount -

Supplying and drawing following sizes of PVC/XLPE insulated copper conductor, multi core flexible cable conforming to IS 694 part I 1960 in the existing surface/recess conduit as required including giving necessary connections of the following sizes 3X2.5 Sqmm

Quantity4418

Rate-

Amount -

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Quantity-

Rate-

Amount -

20 mm

Quantity15114

Rate-

Amount -

25 mm

Quantity7595

Rate-

Amount -

32 mm

Quantity4106

Rate-

Amount -

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Quantity410

Rate-

Amount -

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Quantity-

Rate-

Amount -

1 or 2 Module (75mmX75mm)

Quantity459

Rate-

Amount -

3 Module (100mmX75mm)

Quantity278

Rate-

Amount -

4 Module (125mmX75mm)

Quantity112

Rate-

Amount -

6 Module (200mmX75mm)

Quantity249

Rate-

Amount -

8 Module (125mmX125mm)

Quantity112

Rate-

Amount -

12 Module (200mmX150mm)

Quantity159

Rate-

Amount -

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Quantity-

Rate-

Amount -

5/6 A switch

Quantity885

Rate-

Amount -

15/16 A switch

Quantity374

Rate-

Amount -

3 pin 5/6 A socket outlet

Quantity1070

Rate-

Amount -

15/16 A socket outlet

Quantity374

Rate-

Amount -

Telephone socket outlet

Quantity66

Rate-

Amount -

TV antenna socket outlet Each

Quantity36

Rate-

Amount -

Supply and fixing 3 pin, 6A ceiling rose on the existing junction box / wooden block including connection etc as required.

Quantity2635

Rate-

Amount -

20 A switch

Quantity100

Rate-

Amount -

20/25 A socket out let

Quantity100

Rate-

Amount -

Supplying and fixing down rod for pendent prewired tube light with, 1.5m long of required size thick steel conduit, aluminium cast back plate and brass holder complete, including wiring the down rod with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and painting etc. as required.

Quantity57

Rate-

Amount -

HT CABLE SUPPLY

Quantity-

Rate-

Amount -

Supply of following 11kV grade XLPE insulated PVC sheathed wire armored aluminum conductor power cable suitable for 11kV earthed system conforming to IS 7098(Part 2) and other relevant standards. (Refer detailed technical specification)

Quantity-

Rate-

Amount -

3cx300sq.mm Al Cable

Quantity790

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm

Quantity237

Rate-

Amount -

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc Above 120 sq. mm and upto 400 sq. mm

Quantity40

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 120 sq. mm and upto 400 sq. mm

Quantity110

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required. Above 120 sq. mm and upto 400 sq. mm

Quantity474

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size on the wall surface as required. Above 120 sq. mm and upto 400 sq. mm

Quantity100

Rate-

Amount -

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 300 sq. mm

Quantity9

Rate-

Amount -

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 sq. mm

Quantity6

Rate-

Amount -

LT CABLE SUPPLY

Quantity-

Rate-

Amount -

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium / Copper conductor power cable confirming to IS 7098 (part 1) ammended upto date.

Quantity-

Rate-

Amount -

3.5cx400sq.mm Al Cable

Quantity3085

Rate-

Amount -

3.5cx300sq.mm Al Cable

Quantity80

Rate-

Amount -

3.5cx240sq.mm Al Cable

Quantity2160

Rate-

Amount -

3.5cx185sq.mm Al Cable

Quantity140

Rate-

Amount -

3.5cx150sq.mm Al Cable

Quantity35

Rate-

Amount -

3.5cx120sq.mm Al Cable

Quantity850

Rate-

Amount -

3.5cx95sq.mm Al Cable

Quantity116

Rate-

Amount -

3.5cx70sq.mm Al Cable

Quantity420

Rate-

Amount -

3.5cx50sq.mm Al Cable

Quantity337

Rate-

Amount -

3.5cx35sq.mm Al Cable

Quantity1220

Rate-

Amount -

4cx25sq.mm Al Cable

Quantity380

Rate-

Amount -

4cx16sq.mm Al Cable

Quantity1705

Rate-

Amount -

4cx10sq.mm Al Cable

Quantity6068

Rate-

Amount -

3cx6 sq.mm Al Cable

Quantity563

Rate-

Amount -

2cx 6sq.mm Al Cable

Quantity225

Rate-

Amount -

3cx 4sq.mm cu Cable

Quantity130

Rate-

Amount -

4cx 6sq.mm cu Cable

Quantity160

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Quantity2146.5

Rate-

Amount -

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Quantity232.15

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Quantity450

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Quantity3531.05

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Quantity1750

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Quantity890

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Quantity236

Rate-

Amount -

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Quantity24.5

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Quantity24.5

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Quantity307

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Quantity139

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Quantity140

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 95 sq. mm and upto 185 sq. mm

Quantity335.5

Rate-

Amount -

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Quantity51.25

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 95 sq. mm and upto 185 sq. mm

Quantity51.25

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm

Quantity580

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Quantity58.25

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Quantity484

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Quantity1610

Rate-

Amount -

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 25/40x3mm MS flat clamp)

Quantity265

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 185 sq. mm and upto 400 sq. mm

Quantity276

Rate-

Amount -

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 185 sq. mm and upto 400 sq. mm

Quantity3249

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Quantity306

Rate-

Amount -

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Quantity96

Rate-

Amount -

END TERMINATION

Quantity-

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required

Quantity-

Rate-

Amount -

3.5cX25 sq.mm (28mm)

Quantity4

Rate-

Amount -

3.5cx400sq.mm Al Cable

Quantity18

Rate-

Amount -

3.5cx300sq.mm Al Cable

Quantity2

Rate-

Amount -

3.5cx240sq.mm Al Cable

Quantity20

Rate-

Amount -

3.5cx185sq.mm Al Cable

Quantity4

Rate-

Amount -

3.5cx120sq.mm Al Cable

Quantity6

Rate-

Amount -

3.5cx95sq.mm Al Cable

Quantity4

Rate-

Amount -

3.5cx70sq.mm Al Cable

Quantity12

Rate-

Amount -

3.5cx50sq.mm Al Cable

Quantity10

Rate-

Amount -

3.5cx35sq.mm Al Cable

Quantity34

Rate-

Amount -

4cx16sq.mm Al Cable

Quantity54

Rate-

Amount -

4cx10sq.mm Al Cable

Quantity222

Rate-

Amount -

3cx6 sq.mm Al Cable

Quantity52

Rate-

Amount -

3cx 4sq.mm cu Cable

Quantity16

Rate-

Amount -

2cx 6sq.mm Al Cable

Quantity14

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Quantity5

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm width X 50 mm depth X 2.0 mm thickness

Quantity345

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 600 mm width X 50 mm depth X 2.0 mm thickness

Quantity70

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Quantity2

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 450 mm width X 50 mm depth X 2.0 mm thickness

Quantity26

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends " ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 600 mm width X 50 mm depth X 2.0 mm thickness

Quantity4

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Quantity2

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 450 mm width X 62.5 mm depth X 1.6 mm thickness

Quantity26

Rate-

Amount -

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 600 mm width X 62.5 mm depth X 1.6 mm thickness

Quantity12

Rate-

Amount -

Supply and fixing of Cable Ladder with horizontal & vertical bends, reducers, Tee's, Cross over, supports, brackets and other accessories as required confirming to IEC-61537. The Cable Ladder shall be made of 1.5mm thick sheet steel up to 600mm & 2.0mm thick up to 1000mm.The cable Ladder shall be galvanized for corrosion protection confirming to ISO 1461. The cable ladder should be tested for safe working load of 225 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mmm size suitable for fixing the cable clamps the space between the rungs shall be 300mm.

Quantity-

Rate-

Amount -

200 mm Width X 75 mm Height

Quantity35

Rate-

Amount -

300 mm Width X 75 mm Height

Quantity45

Rate-

Amount -

450 mm Width X 75 mm Height

Quantity29

Rate-

Amount -

900 mm Width X 75 mm Height

Quantity48

Rate-

Amount -

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required

Quantity10

Rate-

Amount -

LIGHT FIXTURES

Quantity-

Rate-

Amount -

Supply of 36 W indoor recess mounted LED Light, square, 4000 lumens light output in 5700K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection, along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, and including all the necessary accessories as required complete. The luminaire and Driver shall be saperately BIS Approved.

Quantity20

Rate-

Amount -

Supply of 40W LED Batten ,4000 lumens light output in 5700K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection, along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, Ripple less than 5%, 4kV surge protection and including all the necessary accessories as required complete. The luminaire and Driver shall be separately BIS Approved.

Quantity896

Rate-

Amount -

Supply of 9 W LED 2 feet Batten,1200 lumens light output in 5700 K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection, along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, Ripple less than 5%, 4kV surge protection and including all the necessary accessories as required complete. The luminaire and Driver shall be separately BIS Approved.

Quantity77

Rate-

Amount -

Supply of 10W, outdoor Bulk head surface mounted round with 1100 lumens light output, 6500K CCT ,110 Lumens per watt system efficiency IP66 with IK10 Protection, 50,000 burning hours as per L70, Pressure diecast aluminium housing, CRI80. The housing is of single piece pressure die-cast aluminium housing & cover retaining frame and corrosion resistance with Heat resistant toughened frosted glass cover glare free light distribution, prewired complete with all necessary accessories suitable for operation on 230V, 50Hz AC supply as required. The luminaire and the driver shall be separately BIS approved.

Quantity140

Rate-

Amount -

Supply, installation, testing and commissioning of 12W LED Bulb with minimum 1200 lumens light output in 6500K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection,along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, Ripple less than 5%, 4kV surge protection and including all the necessary accessories as required complete. The luminaire and Driver shall be saperately BIS Approved.

Quantity118

Rate-

Amount -

Supply of 18W indoor recess mounted round LED Light, 1260 lumens light output in 6500K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection, along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, and including all the necessary accessories as required complete. The luminaire and Driver shall be separately BIS Approved

Quantity4

Rate-

Amount -

Supply of 80 W LED High Bay light, round, with minimum 10000 lumens light output in 6500K CCT, greater than 100 lumens per watt system efficacy, with High Efficiency Extruded aluminium housing and Polycarbonate Diffuser with provision of End to End connection, along with high power LED having minimum 50,000 burning hours as per L70. The driver shall , power factor 0.9, Ripple less than 5%, 4kV surge protection and including all the necessary accessories as required complete. The luminaire and Driver shall be separately BIS Approved.

Quantity127

Rate-

Amount -

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Quantity118

Rate-

Amount -

5m Pole for Streetlight: Supply Installation, Testing and Commissioning of 5M Octagonal Pole RROP 0501 having top dia. of 70mm bottom dia. of 130mm, sheet thickness of 3mm with base plate dimensions as 200x200x12mm along with OEM supplied foundation bolts, with built-in control box prewired, concealed wiring with 3C 2.5 sq.mm cu wire from the control box to light fixture, and all other accessories, gland plates complete as required. and OEM supplied standard 1M Single Arm bracket with pipe dia. of 48mm OD and cap length of minimum 225mm.

Quantity80

Rate-

Amount -

LED Streetlight: Supply and Installation of 25W +/-10% LED streetlight with 2750 Lumens light output in 5700K CCT Greater than 150 lumens per Watt system efficacy, IP66 with IK08 Protection, 50,000 burning hours as per L70.THD, 10%and Power factor 0.95 the driver shall have 150-240 operating voltage ranges with Pressure diecast aluminium housing and a toughened glass of separately BIS approved.

Quantity80

Rate-

Amount -

200W LED: Supply of 200W +/-10W LED Flood Light with lumen output not Less than 24,000 Lumens Light output using High power LED's in 5700K CCT greater than 120Lumens per watt system light output, 50,000 burning hrs as per L70, with uniform light spread without Glare. Input power factor /= 0.95, CRI 70 and THD /= 10%. The housing shall be made of Pressure diecast aluminium housing to achieve IP Protection greater than IP65, and IK rating not less than IK07, necessary Surge Protection bolted inside the luminaire. As per IEEE 62.41.2 standards, 150-300V Operating range, 440V Phase 2 Phase Protection, 500hrs NSS Salt spray tested Corrosion resistant coating.

Quantity50

Rate-

Amount -

Supply of 16 Metres Highmast system with BSEN10025 Steel plate, suitable for 55 m/sec wind speed along with head frame, Motorised landern carriage with winch system that can be lowered for service and suitable for mounting 8 nos of LED Flood Lights symmetrically and other accessories manufactured in factory. Average 70 microns Hot dip Octagonal Galvanised internally and externally,3mm thickness, Top dia 150mm and bottom 310mm and 6nos foundation bolts. The motor using inside the mast shall be three Phase only. The section shall be in 2 pieces designed to withstand upto 55m/s wind speed along with aviation light/head frame and all accessories. Supply of cable, connector, single phase integral power tool motor, manual handle, junction box, lightning finial, single dome LED aviation light etc. Supply of foundation bolts along with nuts, washers, anchor plate and common template. Authorisation letter from High mast OEM to be submitted for full warranty of High mast system.

Quantity10

Rate-

Amount -

Supply Conveyance, installation, testing and commissioning of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of 1200 mm sweep 230 Volt AC BLDC Motor 5 Star Ratedceiling fan, 3 blade alongwith copper wound stator, Aluminium blades, capacitor, downrod, canopy etc. as required including wiring the downrods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Quantity245

Rate-

Amount -

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Quantity245

Rate-

Amount -

Supply of 250mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C.

Quantity102

Rate-

Amount -

Supply of 450mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C.

Quantity14

Rate-

Amount -

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,commissioning etc. as required.

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity116

Rate-

Amount -

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCCB's (but without MCCB's and incomer ) as required , 6 way (4+ 18), Double door.

Quantity1

Rate-

Amount -

MSB(Accomodation)- Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 250A MCCB Outgoing 1x125A MCCB, 4 x 63A MCCB , 3 x 40A MCCB . Busbar: Phase - AL 20x10, Neutral - AL 63x6, Earth - AL 40x6. Mounting type: Floor. Cable Entry: Top.

Quantity1

Rate-

Amount -

Common Panel- Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 125 A MCCB Outgoing 1x100A MCCB, 3 x 63A MCCB , 1 x 40A MCCB, 1 x 32A MCCB . Size: 850x1575x250mm. Busbar: Phase - AL 20x10, Neutral - AL 25x10, Earth - AL 25x10. Mounting type: Floor. Cable Entry: Top

Quantity1

Rate-

Amount -

Metering Panel 1&2 - Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 100 A 4P Isolator Outgoing 4 x 40A MCB, 4 x 32A Fuse, 4x Provision for 3 phase energy meter Busbar: Phase - AL 20x10, Neutral - AL 25x6, Earth - AL 25x6. Mounting type: Floor. Cable Entry: Top.

Quantity2

Rate-

Amount -

Metering Panel 3 - Supply, Installation, Testing & Commissioning of LT Switch Board , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 63 A 4P Isolator Outgoing 2 x 40A MCB, 2 x 32A Fuse, 2x Provision for 3 phase energy meter Busbar: Phase - AL 20x10, Neutral - AL 25x6, Earth - AL 25x6. Mounting type: Floor. Cable Entry: Top.

Quantity1

Rate-

Amount -

MSB(RPU)- Supply, Installation, Testing & Commissioning of LT Switch Board (Extendable Type) , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having IEC 61439 certification and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 800A ACB, 36kA TPN Outgoing 1x630A 36 kA ACB TPN, 1 x 400A 36 kA MCCB TPN , 2 x 250A 36 kA MCCB TPN, 1 x 200A 36 kA MCCB TPN,1 x 125A 36 kA MCCB TPN,. Busbar: 800A Extensible AL Mounting type: Floor. Cable Entry: Bottom

Quantity1

Rate-

Amount -

MSB (STER)- Supply, Installation, Testing & Commissioning of LT Switch Board (Extendable Type) , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 315A MCCB 25 kA TPN Outgoing 2x250A MCCB TPN, 1 x 200A MCCB TPN , 1 x 100A MCCB TPN , 2 x 63A MCCB TPN Busbar: 315 A Extensible AL Mounting type: Floor. Cable Entry: Bottom

Quantity1

Rate-

Amount -

MSB(RTRC)- Supply, Installation, Testing & Commissioning of LT Switch Board (Extendable Type) , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having IEC 61439 certification and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 800A ACB, 36kA TPN Outgoing 1x630A 36 kA ACB TPN, 2 x 250A 36 kA MCCB TPN , 1 x 200A 36 kA MCCB TPN, 2 x 160A 36 kA MCCB TPN. Busbar: 800A Extensible AL Mounting type: Floor. Cable Entry: Bottom

Quantity1

Rate-

Amount -

Supplying and fixing of SMDB following ways surface/ recess mounting, vertical type, 415 volts, dust protected, duly powder painted, inclusive of 250 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCCB's (but without MCCB's and incomer ) as required , 8 way (4 + 24), Double door.

Quantity3

Rate-

Amount -

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity7

Rate-

Amount -

6 way (4 + 18), Double door

Quantity3

Rate-

Amount -

8 way (4 + 24), Double door

Quantity5

Rate-

Amount -

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required , 8 way (8 + 18), Double door

Quantity3

Rate-

Amount -

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - three phase double cover (IP 42/43)

Quantity3

Rate-

Amount -

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 6 way (8+18) - three phase double cover (IP 42/43)

Quantity10

Rate-

Amount -

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 8 way (8+24) - three phase double cover (IP 42/43)

Quantity10

Rate-

Amount -

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 12 way (8+36) - three phase double cover (IP 42/43)

Quantity15

Rate-

Amount -

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8 way, Double door

Quantity6

Rate-

Amount -

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 12 way, Double door

Quantity13

Rate-

Amount -

Supplying and fixing following rating, four pole, 415 volts, MCCB in the existing MCCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

250A, 25kA

Quantity1

Rate-

Amount -

125A, 25kA

Quantity3

Rate-

Amount -

63 A, 25 Ka

Quantity9

Rate-

Amount -

100 A, 16 Ka

Quantity3

Rate-

Amount -

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

32A

Quantity31

Rate-

Amount -

63 amps

Quantity11

Rate-

Amount -

100 amps

Quantity3

Rate-

Amount -

Supplying and fixing following rating, 415 volts,TP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

32A

Quantity27

Rate-

Amount -

40A

Quantity43

Rate-

Amount -

63A

Quantity6

Rate-

Amount -

Supplying and fixing following rating, 415 volts,4P RCBO in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

32A,30 mA

Quantity7

Rate-

Amount -

40A,30 mA

Quantity24

Rate-

Amount -

63A,30 mA

Quantity3

Rate-

Amount -

100A,100 mA

Quantity2

Rate-

Amount -

"Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. "

Quantity-

Rate-

Amount -

25 amps

Quantity17

Rate-

Amount -

32 amps

Quantity9

Rate-

Amount -

Supplying and fixing following rating, 240 volts,2P RCBO in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

25A, 30 mA

Quantity29

Rate-

Amount -

Supplying and fixing following rating, 240 volts,2 pole metal enclosure complete with connections, testing and commissioning etc. as

Quantity20

Rate-

Amount -

Single pole

Quantity1366

Rate-

Amount -

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Quantity193

Rate-

Amount -

Supplying and fixing following rating, 240 volts, metal pug and socket complete with connections, testing and commissioning etc. as required. 20A

Quantity27

Rate-

Amount -

Supplying and fixing of 415 volts, 32A, 4 pole pug and socket DB complete with connections, testing and commissioning etc. as required.

Quantity27

Rate-

Amount -

Supplying and fixing following rating, four pole, 415 volts, Changeover Switch with complete connections, testing and commissioning etc. as required. 32A.

Quantity2

Rate-

Amount -

EARTHING

Quantity-

Rate-

Amount -

Providing and fixing 25 mm X 3 mm copper strip on surface or in recess for connections etc. as required

Quantity674

Rate-

Amount -

Providing and fixing 25 mm X 6 mm copper strip on surface or in recess for connections etc. as required

Quantity52

Rate-

Amount -

Providing and fixing 32 mm X 6 mm copper strip on surface or in recess for connections etc. as required

Quantity143

Rate-

Amount -

Providing and fixing 50 mm X 6 mm copper strip on surface or in recess for connections etc. as required

Quantity50

Rate-

Amount -

Providing and fixing 40 mm X 6 mm GI strip on surface or in recess for connections etc. as required

Quantity395

Rate-

Amount -

Providing and fixing 50 mm X 6 mm GI strip on surface or in recess for connections etc. as required

Quantity20

Rate-

Amount -

Providing and fixing 75 mm X 10 mm GI strip on surface or in recess for connections etc. as required

Quantity155

Rate-

Amount -

Providing and fixing 75 mm X 6 mm GI strip on surface or in recess for connections etc. as required

Quantity295

Rate-

Amount -

Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity150

Rate-

Amount -

Supplying and laying 25 mm X 6 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity150

Rate-

Amount -

Supplying and laying 32 mm X 6 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity440

Rate-

Amount -

Supplying and laying 40 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity70

Rate-

Amount -

Supplying and laying 50 mm X 6 mm Cu strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity40

Rate-

Amount -

Supplying and laying 75 mm X 6 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity1165

Rate-

Amount -

Supplying and laying 75 mm X 10 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity620

Rate-

Amount -

Supplying and laying 50 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity70

Rate-

Amount -

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)

Quantity3190

Rate-

Amount -

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Quantity2620

Rate-

Amount -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Quantity12

Rate-

Amount -

Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Quantity3538.4

Rate-

Amount -

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Quantity884.4

Rate-

Amount -

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity12

Rate-

Amount -

Earthing with CI plate 1200 mm x 1200mm x 12 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Quantity46

Rate-

Amount -

UPS

Quantity-

Rate-

Amount -

Supply, installation, and commissioning of 2kva UPS single phase in and out with indoor (IP20) with built in isolation transformer at input side, Input pf 0.98, double conversion technology with input voltage range 160-270 @ full load, 50Hz It should be 100% generator compatible, with Efficiency 90% and including all accessories etc as required. The system shall comply to IEC /EN 62040-1 for General safety EN/IEC 62040-2, for Electromagnetic Compatibility, EN/IEC 62040-3 for Performance, EN/IEC62040-4 Environmental Compatibility, and relevant IS standards. The system should be IGBT rectifier and inverter,12v 40ahx 6 nos Tubular batteries with stand and interconnecting cable, For 30 min battery backup at .8 PF with Min VAH 2880.

Quantity3

Rate-

Amount -

Supply, installation, and commissioning of 3kva UPS single phase in and out with indoor (IP20) with built in isolation transformer at input side, Input pf 0.98, double conversion technology with input voltage range 160-270 @ full load, 50Hz It should be 100% generator compatible, with Efficiency 90% and including all accessories etc as required. The system shall comply to IEC /EN 62040-1 for General safety EN/IEC 62040-2, for Electromagnetic Compatibility, EN/IEC 62040-3 for Performance, EN/IEC62040-4 Environmental Compatibility, and relevant IS standards. The system should be IGBT rectifier and inverter.

Quantity4

Rate-

Amount -

Networking

Quantity-

Rate-

Amount -

Supply, Installation,testing and commissioning of Outdoor type IR Varifocal Bullet Camera with below specifications as minimum and with all the necessary accessories for the installation - 4 MP Resolution - 2.8-12MM - H.264, MJPEG codec - Edge Storage (Minimum 32GB) - IR - 30 meters - IP67 - PoE

Quantity22

Rate-

Amount -

Supply, Installation, testing and commissioning of Fixed Dome Camera with below specifications as minimum and with all the necessary accessories for the installation - 4 MP Resolution - 2.8/3.6 mm fixed lens - H.264, MJPEG codec - Edge Storage - IR - 30 meters - PoE

Quantity27

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 8 PoE Layer -2 Port Network Switch 10/100/1000 Mbps.

Quantity9

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 24 Port Network Switch 10/100/1000 Mbps

Quantity8

Rate-

Amount -

Supply, Installation, Testing and installation of Cat - 6, shuttered type, 24 port fully loaded patch panel with necessary cable manager for routing the cable inside rack with all accessories required for complete installation as required as directed by the engineer in charge.

Quantity11

Rate-

Amount -

Supply, Installation,Testing & commissioning of CAT6 RJ45 I/O with a separator to eliminate crosstalk, Terminates 8 conductors at the same time reducing installation time, 45˚ silver-plated IDCs provide secure, reliable gas-tight connections

Quantity37

Rate-

Amount -

Supply and fixing RJ45 Connector for connecting UTP cable giving necessary connections including crimping as required .

Quantity37

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Single/ Dual Port Faceplate

Quantity37

Rate-

Amount -

Supply, Installation, testing and commissioning of NVR with below specifications as minimum and with all the necessary accessories for the installation - 8 Channels - H.265, H.264, MJPEG compression - 2 SATA Ports supporting 10TB HDD

Quantity5

Rate-

Amount -

Supply, Installation, Testing and Commissioning of LED Displays 32" for CCTV Monitoring with all the necessary wall mounting accessories

Quantity5

Rate-

Amount -

Supply, Installation, Testing & Commissioning of 9U Network Rack with below specifications as minimum and all the necessary accessories - Height - 9U - Dimensions - 600 x 600 - Fan Units with 4 Fans - PDU 6 point - 1 Nos's - Mounting Hardware Kit (1 lot) - Tray - Front glass doors and back steel door and side panels

Quantity9

Rate-

Amount -

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required 1 run of Cable

Quantity6090

Rate-

Amount -

Patch Cable - User Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 2 Meter length etc. of approved make as required for complete installation.

Quantity37

Rate-

Amount -

Patch Cable - Hub Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 1 Meter of approved make as required for complete installation.

Quantity37

Rate-

Amount -

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Quantity672

Rate-

Amount -

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 10 pair

Quantity1060

Rate-

Amount -

krone Box - Supply, erection, testing and commissioning of following pair krone with Box including mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for for complete installation in wall as directed by the Engineer in charge. 10 pair

Quantity51

Rate-

Amount -

Supplying and drawn of OFC cable in the existing surface/recessed steel/PVC conduit as requiredbr4 pair

Quantity401

Rate-

Amount -

Supply, Installation, Testing & Commissioning of Analog EPABX System with all accessories required for complete installation as per the Tender Specifications. - 70 Extensions, expandable upto 100 Extension - 1 PRI Trunk - 2/4 CO Trunk

Quantity1

Rate-

Amount -

Supply and fixing of UnPerforated Cable tray with cover / Ceiling Raceway closed with snap fit lid, suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461. The Ceiling Raceway shall be supplied with cover with the standard length of 3 Mtr.

Quantity-

Rate-

Amount -

50 mm width x 50mm Height with Cover

Quantity78

Rate-

Amount -

100 mm width X 50 mm depth X 1.6 mm thickness

Quantity40

Rate-

Amount -

150 mm width X 50 mm depth X 1.6 mm thickness

Quantity50

Rate-

Amount -

SUBSTATION

Quantity-

Rate-

Amount -

1000kVA Indoor Transformer: Supply, installation, testing and commissioning of 1000 kVA, 11kV/433V, 3 phase, 50 Hz, Delta star, DYn11, Dry type, cast resin, indoor, natually cooled, copper double wound transformer with Off load tap changer from +5% to -10% in steps of ±2.5% , class F insulation, complete with WTI and scanner for alarm & trip, unidirectional rollers, cable end box for termination of HT cables & Bus duct/ cable for LT side complete with rating and technical name plate, earthing terminals with lugs, lifting lugs in all respect with all necessary standard accessories and as per IS. The transformer shall have suitable enclosure for providing neutral CT on earthed star point with connector for connection to REF relay provided in Main panel.The Transformer Enclosure shall have suitably designed Louvers for Air Circulation & efficient Cooling. The enclosure shall be Epoxy Powder coated. Losses shall be as per ECBC guidelines The transformer shall be confirm to IS:2026/77 subjected to all routine tests as per IS/IEC standards. Type test certificate shall be submitted. The rate shall be inclusive of all materials, lead, lift, etc. complete as per single line diagram & technical specification.

Quantity1

Rate-

Amount -

800kVA Indoor Transformer: Supply, installation, testing and commissioning of 800 kVA, 11kV/433V, 3 phase, 50 Hz, Delta star, DYn11, Dry type, cast resin, indoor, natually cooled, copper double wound transformer with Off load tap changer from +5% to -10% in steps of ±2.5% , class F insulation, complete with WTI and scanner for alarm & trip, unidirectional rollers, cable end box for termination of HT cables & Bus duct/ cable for LT side complete with rating and technical name plate, earthing terminals with lugs, lifting lugs in all respect with all necessary standard accessories and as per IS. The transformer shall have suitable enclosure for providing neutral CT on earthed star point to Main panel.The Transformer Enclosure shall have suitably designed Louvers for Air Circulation & efficient Cooling. The enclosure shall be Epoxy Powder coated. Losses shall be as per ECBC guidelines The transformer shall be confirm to IS:2026/77 subjected to all routine tests as per IS/IEC standards. Type test certificate shall be submitted. The rate shall be inclusive of all materials, lead, lift, etc. complete as per single line diagram & technical specification.

Quantity1

Rate-

Amount -

250kVA Indoor Transformer: Supply, installation, testing and commissioning of 250 kVA, 11kV/433V, 3 phase, 50 Hz, Delta star, DYn11, Dry type, cast resin, indoor, natually cooled, copper double wound transformer with Off load tap changer from +5% to -10% in steps of ±2.5% , class F insulation, complete with WTI and scanner for alarm & trip, unidirectional rollers, cable end box for termination of HT cables & Bus duct/ cable for LT side complete with rating and technical name plate, earthing terminals with lugs, lifting lugs in all respect with all necessary standard accessories and as per IS. The transformer shall have suitable enclosure for providing neutral CT on earthed star point to Main panel.The Transformer Enclosure shall have suitably designed Louvers for Air Circulation & efficient Cooling. The enclosure shall be Epoxy Powder coated. Losses shall be as per ECBC guidelines The transformer shall be confirm to IS:2026/77 subjected to all routine tests as per IS/IEC standards. Type test certificate shall be submitted. The rate shall be inclusive of all materials, lead, lift, etc. complete as per single line diagram & technical specification.

Quantity1

Rate-

Amount -

HT panels

Quantity-

Rate-

Amount -

INDOOR HT PANEL Supply, installation, testing and commissioning of Indoor HT VCB panel unit, floor mounted, fabricated with 2mm thick CRCA sheet suitably reinforced, powder coated. Incomer One no. 11KV,630A,25kA for 3 sec HT DRAW OUT TYPE VCB WITH SHUNT TRIP with suitably interlocked earth switch, having horizontal draw out and isolation. The VCB shall be fitted with motorized spring mechanism for closing , ON, OFF LED /mechanical indication lamp, emergency trip, Microprocessor based Protection relays (3 OC & 1 SC), high speed tripping relay, trip circuit supervision relay, safety shutter etc. The breaker shall be complete with closing coil, tripping coil and shunt trip. Providing necessary power pack (in-built) also forms part of the scope. The panel shall be provided with the required no. of auxiliary contacts with 4NO+4NC spare contacts. Components in each incomer panels shall also include, but not limited to the follwing items. 1 no. Trip neutral close (T-N-C) switch. 1 no. Analogue volt meter scaled 0-15KV with selector switch 1 no. Analogue ammeter scaled 0-50 A with selector switch 1 set On,Off, Trip, Trip healthy, spring charge indication lamp 1 set panel earth bus. 1 set Inbuilt Power pack of 110V AC input with DC output for control & indication 1 set Draw out type 3 limb, 11 kV/110V, 100VA, class 0.2, epoxy cast resin potential transformer with necessary HT & LT fuses. 1 set Epoxy resin cast CT with suitable ratio as per demand load, with 10VA, class 0.2s for metering & 15VA class 5P10 for protection. 1 no Panel heater with a control switch and illumination lamp with door switch. 1 set Test terminal block. 1 set 630 A TP copper bus duly sleeved with all accessories and insulators complete as required. 1 set 8 window solid state alarm annunciator with test, acknowledge, rest push buttom with hooter. The panel shall have provision for HT TOD /NET Meter with communication port compatable for IEC 62056. The panel shall be subjected to all routine tests as per IS/IEC standards. Type test certificate of identical panel shall be submitted. The VCB & panel shall be provided with all necessary standard safety feature as per IS & door interlocks such as breaker cannot be drawn out when breaker is in ON position and similarly breaker cannot be closed unless it is fully in drawn in condition. In addition to the above, 11kV HT panel shall be with all requirements as per the guidelines by Local E.B authorities and Electrical inspectorate.

Quantity3

Rate-

Amount -

LT PANELS and BUSDUCTS

Quantity-

Rate-

Amount -

MAIN PANEL-1 Transformer Room R3: Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to IEC 61439 Part 1&2 and the panal shall be of makes OEM make. The type, size and manufacturing of enclosure shall be same as is for the design verified panel. The panel shall be free standing with floor mounting base and required base frame, mounting bracket etc shall be supplied and panel shall be with following: switchgears, metering instruments and accessories etc. as per drawing & specifications as required to complete installation. The panel shall be of extensible type on both sides. The IP rating shall be 42 or better and form of construction shall be form 3B or higher. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker (the design calculation for the mechanical strength of busbar supports, spacing between supports, temperature rise etc shall be furnished). The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with appropriately rated HRC fuses. The panel shall be suitable for Bottom Cable entry. Incomer: 1600A, 4P, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release, u/V coil , RS 485 communication facility - 1 Nos, 400A, TP, 50 KA, Microprocessor based, MCCB ,adjustable over load and short circuit and earth fault release, shunt trip, auxiliary and trip alarm contacts – 1No. & 400A 4P contactor - 1Nos. Instruments like 2A HRC fuse with base , Digital Multifunction meter - 2 Nos., RYB indication lamp LED type - 2Nos, 1600/5A 10VA class1 for metering and APFC, 400/5A class1 10VA for metering, 1600/5A 15VA class PS for REF relay, REF relays ,400/5 A 10VA Class1 - 1 Nos. for Reverse power relay, Reverse power relay - 1 Nos. etc. as per single line diagram. AMF required as per Single line diagram. 2000A TPN busbar chamber with Aluminium busbar. Pluggable type surge arrester Class B / Class 1 as per IEC 61643 (IP 20)-1 set. Out goings: 1000 A, TP, 50kA, EDO ACB with microprocessor based adjustable release with OL SC protection - 2Nos, 800 A, TP, 50kA, EDO ACBwith microprocessor based adjustable release with OL SC protection - 3Nos, 630 A,TP, 50kA, microprocessor based MCCB with microprocessor based adjustable release with OL & SC protection - 1Nos, 400 A,TP, 50kA, microprocessor based MCCB with microprocessor based adjustable release with OL & SC protection - 1Nos, 250 A,TP, 50kA, microprocessor based MCCB with microprocessor based adjustable release with OL & SC protection - 2Nos. 160 A,TP, 50kA, microprocessor based MCCB with microprocessor based adjustable release with OL & SC protection - 3Nos. Digital smart meters combatable with IEC 62056 with respective class 1 CT's - 12 Nos. as per single line diagram.

Quantity1

Rate-

Amount -

MAIN PANEL-2 Transformer Room R1: Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to IEC 61439 Part 1&2 and the panel shall be OEMs. The type, size and manufacturing of enclosure shall be same as is for the design verified panel. The panel shall be free standing with floor mounting base and required base frame, mounting bracket etc shall be supplied and panel shall be with following switchgears, metering instruments and accessories etc. as per drawing & specifications as required to complete installation. The panel shall be of extensible type on both sides. The IP rating shall be 42 or better and form of construction shall be form 3B or higher. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker (the design calculation for the mechanical strength of busbar supports, spacing between supports, temperature rise etc shall be furnished). The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with appropriately rated HRC fuses. The panel shall be suitable for Bottom Cable entry. Incomer: 1250A, Four pole, 50 KA, Electrical Draw Out type ACB with microprocessor based adjustable overcurrent and earthfault release U/V coil, RS 485 communication facility - 1 No. 400A, TP, 50 KA, Microprocessor based, MCCB ,adjustable over load and short circuit and earth fault release, shunt trip, auxiliary and trip alarm contacts – 1No. & 400A 4P contactor - 1Nos. Instruments like 2A HRC fuse with base , Digital Multifunction meter, RYB indication lamp LED type - 2 Nos , 1250/5A 10VA class 1 for metering , 400/5A 10VA Class1 10 VA for Reverse power relay, Reverse power relay - 1 Nos., etc. required as per Single line diagram. AMF controllers required as per Single line diagram. 1250A TPN busbar chamber with Aluminium busbar.Pluggable type surge arrester Class B / Class 1 as per IEC 61643 (IP 20)-1 set Out goings: 800 A, TP, 36kA, EDO ACBwith microprocessor based adjustable release with OL SC protection - 1Nos, 630A, TP, 36kA, MCCB microprocessor based adjustable release with OLSC protection - 3Nos , 500A, TP, 36kA, MCCB microprocessor based adjustable release with OLSC protection - 1Nos 400 A, TP, 36kA, MCCB microprocessor based adjustable release with OL SC protection - 1Nos, 315 A, TP, 36kA, MCCB microprocessor based adjustable release with OL SC protection - 1Nos, 250 A, TP, 36kA, MCCB microprocessor based adjustable release with OL SC protection - 1Nos. 160 A,TP, 50kA,MCCB with microprocessor based adjustable release with OL & SC protection - 4Nos. Digital smart meters combatable with IEC 62056 with respective class 1 CT's - 12 Nos. as per single line diagram.

Quantity1

Rate-

Amount -

MAIN PANEL-3 (Accomodation block USS-3) : Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to CPRI type tested for short circuit, IP rating and temperature. The type, size and manufacturing of enclosure shall be same as is for the design verified panel. The panel shall be free standing with floor mounting base and required base frame, mounting bracket etc shall be supplied and panel shall be with following switchgears, metering instruments and accessories etc. as per drawing & specifications as required to complete installation. The panel shall be of extensible type on both sides. The IP rating shall be 42 or better and form of construction shall be form 3B or higher. The short circuit rating shall be suitable to with stand the SC rating of incomer breaker (the design calculation for the mechanical strength of busbar supports, spacing between supports, temperature rise etc shall be furnished). The enclosure shall be powder coated after 7 tank process. The control wiring for voltage circuit shall be with 1.5 sq.mm and for current circuits with 2.5 sq.mm HFFR wire. Protections for control devices shall be with appropriately rated HRC fuses. The panel shall be suitable for Bottom Cable entry. Incomer:400A, FP, 36 kA, Microprocessor based, MCCB ,adjustable over load and short circuit protection and earth fault release, shunt trip, auxiliary and trip alarm contacts - 1no., 200A, FP, 36 kA, Microprocessor based, MCCB ,adjustable over load and short circuit and earth fault release, shunt trip, auxiliary and trip alarm contacts – 1No. & 400A 4P contactor - 1Nos.,200A 4P Contactor-1 No Instrumemts: RYB Indicating lamps LED type - 2 Nos, .,400/5 A 10 VA Class 1 CTs -1 Nos. Digital multifunction meter ( V, A, F,pf,kW,kWh) - 1Nos. for metering, 200/5 A 10 VA Class 1 -1 Nos for reverse power relay, reverse power relay - 1 Nos. etc. required as per Single line diagram. AMF relay wuth electrical interlock required as per Single line diagram. Busbar: 500A TPN busbar chamber with Aluminium busbar. Pluggable type surge arrester Class B / Class 1 as per IEC 61643 (IP 20)-1 set. Outgoings: 320A, 36kA, TP MCCB microprocessor based with OL & SC protection – 1No., 250A, 36kA, TP MCCB microprocessor based with OL & SC protection – 1No, 125A, 36kA, TP MCCB microprocessor based with OL & SC protection – 3Nos, and 100A, 36kA, TP MCCB microprocessor based with OL & SC protection – 2Nos. Digital smart meters combatable with IEC 62056 with respective class 1 CT's - 12 Nos. as per single line diagram.

Quantity1

Rate-

Amount -

APFC PANEL 460 KVAR; Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to IEC 61439 Partbr1&2 and panel shall be OEM panel. The type, size and manufacturing of enclosure shall be same as is for the design verified panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR / LSZH/ ZHFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. There shall be compartmentalisation between breakers and functional units as well as busbars and cables. Incomer :1000A, TP, 50 KA, ACB with thermal magnetic based adjustable overcurrent and earth fault release, RS 485 communication facility - 1 No. Instruments 2A HRC fuse with base, RYB Indicating lamps LED type, Microprocessor based intelligent, 12 step IPFC relay with PF display and necessary accessories, (0-500)V Class 1 with 90 deg defl. Scale, Ammeter Class 1 3Nos., Auto / manual selector switch, ON-OFF -TRIP indication lamp , Voltmeter selector switch , 1000/5A 10 VA Class 1 CTs for metering, etc. as required per Single line diagram. Busbar 1000A TPN busbar chamber with Aluminium busbar. Outgoing : 250A, 50kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 nos., 125A , 50kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 7 nos., 63A , 50kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 2 nos., 50A , 50 kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 Nos., 25A , 50kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 nos. 75 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) -1 No., 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 4 Nos., 40 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos. , 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos. , 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1 Nos., 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1 Nos. 75 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No., 50 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 4 No., 40 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 %Copper detuned Series reactor- 3 No., 25 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2 No., 10 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No., 5 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No. Control wiring required for no load compensation capacitor. The panel shall be Bottom Entry and suitable for termination of cable/Bus system as per Single line diagram and technical specification .Flanges shall be provided for termination of SBD wherever necessary.

Quantity1

Rate-

Amount -

"APFC PANEL 300 KVAR : Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to IEC 61439 Partbr1&2 and panel shall be OEM panel. The type, size and manufacturing of enclosure shall be same as is for the design verified panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR / LSZH/ ZHFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. There shall be compartmentalisation between breakers and functional units as well as busbars and cables. Incomer :800A, TP, 50 KA, thermal magnetic MCCB with adjustable overcurrent and earth fault release, RS 485 communication facility - 1 No. Instruments: 2A HRC fuse with base, RYB Indicating lamps LED type, Microprocessor based intelligent, 10 step IPFC relay with PF display and necessary accessories, (0-500)V Class 1 with 90 deg defl. Scale, Ammeter Class 1 3Nos , Auto / manual selector switch, ON-OFF -TRIP indication lamp , Voltmeter selector switch , 800/5 A 10 VA Class 1 CTs for metering, etc. as required per Single line diagram. Busbar 800A TPN busbar chamber with Aluminium busbar. Outgoing : 160A, 50 kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 nos., 125A, 50 kA, TP MCCB with adjustable thermal magnetic release with OL & SC protection. 5 nos., 63A , 36 kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 2 nos., 50 A , 50kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 nos., 25A , 50kA TP MCCB with adjustable thermal magnetic release with OL & SC protection. 1 nos., 50 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2Nos., 40 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2Nos. , 30 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1Nos., 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1Nos. , 20 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1Nos., 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1Nos. , 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1Nos., 50 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2 No 40 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2No., 30 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2No., 25 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1No., 20 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No., 10 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1No., 5 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No., Control wiring required for no load compensation capacitor. The panel shall be Bottom Entry and suitable for termination of cable/Bus system as per Single line diagram and technical specification .Flanges shall be provided for termination of SBD wherever necessary"

Quantity1

Rate-

Amount -

APFC PANEL 110 KVAR : Supply, Installation, Testing & Commissioning of fully type tested design verified 415V, 50Hz,LT switchboard conforming to CPRI type tested for short circuit, IP rating and temperature.. The type, size and manufacturing of enclosure shall be same as is for the design verified panel, cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size HFFR / LSZH/ ZHFR wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated with following switchgears, metering instruments and accessories etc. complete as required as per drawing specification. There shall be compartmentalisation between breakers and functional units as well as busbars and cables. Incomer :250A, FP, 36 KA, MCCB with thermal magnetic based adjustable overcurrent and earth fault release, RS 485 communication facility - 1 No. Instruments 2A HRC fuse with base, RYB Indicating lamps LED type, Microprocessor based intelligent, 8 step IPFC relay with PF display and necessary accessories, (0-500)V Class 1 with 90 deg defl. Scale, Ammeter Class 1 3Nos. , Auto / manual selector switch, ON-OFF -TRIP indication lamp , Voltmeter selector switch , 10 VA Class 1 CTs for metering, etc. as required per Single line diagram. Busbar 250A TPN busbar chamber with Aluminium busbar. Outgoing : 63A,25kA TP MCB - 4nos., 32A,25kA TP MCB – 2Nos & 25A,25kA TP MCB – 2Nos. 25 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1 Nos. 20 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos. 15 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1 Nos., 10 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 1 Nos., 5 kVAr capacitor duty contactor(AC6B) with illuminated ON- OFF pushbuttons (LED type) - 2 Nos. 25kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1 No., 20kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2 No., 15 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 1Nos., 10 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2No., 5 kVAr,480-520 V,50 Hz heavy duty capacitor(APP-H) with 7 % Copper detuned Series reactor - 2Nos. Control wiring required for no load compensation capacitor. The panel shall be Bottom Entry and suitable for termination of cable/Bus system as per Single line diagram and technical specification .Flanges shall be provided for termination of SBD wherever necessary

Quantity1

Rate-

Amount -

Bus Duct: Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Bus Trunking for use on 3 phase 4 wire 415 volts, 50 Hz A.C. supply with metal clad enclosure made of 1.6mm thick steel sheet duly powder coated in convenient section complete with 4 Nos aluminium bus bars, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size( one on each side) including G.I clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required for Indoor. 1250 amps 50 KA SC for 1 sec.

Quantity10

Rate-

Amount -

Bus Duct: Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Bus Trunking for use on 3 phase 4 wire 415 volts, 50 Hz A.C. supply with metal clad enclosure made of 1.6mm thick steel sheet duly powder coated in convenient section complete with 4 Nos aluminium bus bars, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size( one on each side) including G.I clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required for Indoor. 1600 amps 50 KA SC for 1 sec.

Quantity10

Rate-

Amount -

DG SET and EXHAUST PIPE

Quantity-

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 250 KVA, silent type, radiator cooled, four stroke, multi cylinder electric start D.G Set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The DG shall have suitable AMF control panel. The alternator shall be brushless, self-excited, self-regulated, brushless, suitable for prime operation at 1500 rpm, generating 415V +/- 5% at 0.8 p.f, 50Hz,0.9 lading factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as anti-vibration pad, 2 nos. lead acid batteries (as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, base fuel tank, Residential silencer, exhaust pipe insulated with hood on top suitable size cable termination box, control cables etc as required. The interconnection cable from the generator control panel to ESB for the AMF operation is included in this item. The AMF operation shall be achieved through ATS having AMF facility. The DG shall be provided with external battery charger suitable for lead acid battery provided along with DG set. The battery charger shall have trickle & boost charge with selector switch, protection against overcharging, DC ammeter & voltmeter etc.with all accessories shall be provided in the DG control panel. Rate shall be inclusive of all lift, lead, first fill of lubricating oil, diesel for testing & commissioning, necessary spares &accessories, civil work such as grouting, finishing etc excluding foundation as per single line diagram & particular specification. The work should be as per Electrical Inspectorate / latest Pollution control board norms.

Quantity2

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 125 KVA, silent type, radiator cooled, four stroke, multi cylinder electric start D.G Set with acoustic enclosure and standard control panel. The engine shall be capable of taking 10% overload for one hour after 12 hours of continuous operation. The DG shall have suitable AMF control panel. The alternator shall be brushless, self-excited, self-regulated, brushless, suitable for prime operation at 1500 rpm, generating 415V +/- 5% at 0.8 p.f, 50Hz,0.9 lading factor, 3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as anti-vibration pad, 2 nos. lead acid batteries (as specified by engine manufacturer) and engine driven battery charger along with leads, battery stand, base fuel tank, Residential silencer, exhaust pipe insulated with hood on top suitable size cable termination box, control cables etc as required. The interconnection cable from the generator control panel to ESB for the AMF operation is included in this item. The AMF operation shall be achieved through ATS having AMF facility. The DG shall be provided with external battery charger suitable for lead acid battery provided along with DG set. The battery charger shall have trickle & boost charge with selector switch, protection against overcharging, DC ammeter & voltmeter etc.with all accessories shall be provided in the DG control panel. Rate shall be inclusive of all lift, lead, first fill of lubricating oil, diesel for testing & commissioning, necessary spares &accessories, civil work such as grouting, finishing etc excluding foundation as per single line diagram & particular specification. The work should be as per Electrical Inspectorate / latest Pollution control board norms.

Quantity1

Rate-

Amount -

Supply & installation of exhaust gas piping of suitable diameter ( for minimum capacity of 250 KVA DG set) as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminium cladding etc.

Quantity55

Rate-

Amount -

Supply & installation of exhaust gas piping of suitable diameter ( for minimum capacity of 125 KVA DG set) as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminium cladding etc.

Quantity40

Rate-

Amount -

Solar & Miscellaneous

Quantity-

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 100kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways and access -g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 50kWp upto and including 100kWp. ( Refer Technical Specification for more details)

Quantity3

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 50kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways and access -g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 40kWp upto and including 50kWp. ( Refer Technical Specification for more details) ( Refer Technical Specification for more details)

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 40kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways and access-g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 30kWp upto and including 40kWp. ( Refer Technical Specification for more details)

Quantity2

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 30kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways -g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 20kWp upto and including 30kWp. ( Refer Technical Specification for more details)

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 20kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways and access -g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 15kWp upto and including 20kWp. (Refer Technical Specification for more details)

Quantity2

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 15kW on -grid Solar Photovoltaic Power Plant-conforming to MNRE specifications as amended, consisting of Mono-perc half cut solar PV module, net metering, necessary protections, required earthing, mounted on GI structure-of suitable strength conforming to latest IS 2062 and IS 4759, with the following components complete as required:-- a) Solar Photovoltaic Module of capacity 540 Wp or above, manufactured in India, conforming to-IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 20%. PV modules used in solar power plants/- systems must be warranted for their output peak watt capacity, which should not be less than- 90% at the end of 10 years and 80% at the end of 25 years) Power Conditioning Unit (PCU) / solar inverter of minimum capacity equal to the power plant capacity with nominal voltage 230/415 V, three-phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from-0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency and data monitoring facility. The inverter should comply with applicable IEC/ equivalent BIS standards) Provision for Data Monitoring System complete with accessories.-d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. required) Lightning arrester and respective earth pits shall be provided) required MMS structure for flat/sloped roof with walkways and access -g) Connections & Interconnections by supplying & fixing required size XLPE insulated copper-conductor 1.1 kV grade armoured power, DC cables and control cables between solar modules, main power-cable to grid supply PCU unit along with supplying & fixing of dc and ac control panel including required breakers and accessories as required, necessary channel/conduit lugs and-other accessories etc. as required. The rate of the system based on the site specific conditions shall be in accordance with the pro rata basis (per kWp rate) for plant capacity greater than 10kWp upto and including 15kWp. ( Refer Technical Specification for more details)

Quantity3

Rate-

Amount -

Design, Supply, Installation, Testing and commissioning Data Monitoring System for control and monitoring the operation of the complete Solar power system. It shall have the hardware & software necessary for the data accusation and monitoring of rooftop solar power plant The scope also includes providing the following equipment (1)Supply, installation, testing and commissioning of Microcontroller based RTU for data collection and uploading to server - PRO (2G/3G/4G/ LAN) with Built in power supply for fail - safe operation.IP65, remotely configurable through sim, Data storage available, Analogue and digital inputs for sensors RS485/RS232/TCPIP communicable . (2)Software :-Web Portal and Mobile App Subscription with Central dashboard (5 year for 15 inverters) and Charges for configuration of monitoring system. (3) Supply and installation of All-in-One PC Intel Core i3-1215U 21.5 inch (54.6cm) (4)Supply and installation of Laser jet Pro MFP printer 1 Nos (5) Charges for communication cable connection at inverter end.15 Nos. of inverters (6)Supply and installation of APC 700VA UPS -1 no. with all accessories as approved by the site engineer in charge

Quantity1

Rate-

Amount -

Supply of 11 kV Glove

Quantity3

Rate-

Amount -

Supply fabrication and installation of MS items: Tees, Angles/channels etc on floor/ceiling/wall including necessary civil works such as grouting, finishing etc: and painting with two coats of epoxy primer and 2 coats of polyurethane paint as required.

Quantity800

Rate-

Amount -

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity4

Rate-

Amount -

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Quantity3

Rate-

Amount -

Supply of electrical grade 11kV rubber mat

Quantity15

Rate-

Amount -

Supply of electrical grade 1.1kV rubber mat

Quantity35

Rate-

Amount -

LIGHTNING PROTECTION

Quantity-

Rate-

Amount -

Providing and fixing of fully solid 2m Vertical Air terminal made up of Semi-hard (E-AlMgSiO5), 16mm rod tapered to 10mm. VAT 2 or Equivalent

Quantity49

Rate-

Amount -

Providing and fixing of Interception Tip made up of Semi-hard (E-AlMgSiO5) to provide on the top of Vertical Air Terminal. ITVAT or Equivalent

Quantity49

Rate-

Amount -

Providing and fixing of Stainless Steel SS 304 Wall Clamp to mount Vertical Air Terminal 1 meter to 4 meter. WC 16 SS or Equivalent

Quantity49

Rate-

Amount -

Providing & fixing of Down conductor (8mm solid aluminium alloy round conductor) made up of Semi-hard (E-AlMgSiO5). SRC 8-AL or Equivalent

Quantity760

Rate-

Amount -

Providing & fixing of whether resistant Nylon Parapet Conductor Holder for fixing horizontal air terminal & down conductors. The conductor holder has to fixed using fischer and SS Screws. PCH 8 or Equivalent

Quantity475

Rate-

Amount -

Providing and fixing of Stainless Steel Clamping Shoe/Folding Clamp. CS 8-10/FC 3208/FC 3210 or Equivalent

Quantity142

Rate-

Amount -

Providing and fixing of Stainless Steel SS 304 Test Joint. The 8mm & 10mm Conductor has to be straightly connected to avoid risk of flash over and needs to have disconnection facility to measure values during testing. Minimum 4 screw/bolt joints required for strong bonding. TJRR or Equivalent

Quantity120

Rate-

Amount -

Providing and fixing of Outdoor Glass Fibre Reinforced Polycarbonate Enclosure having minimum inner dimension of 110mm x 110 mm x 67 mm. Abox I 60 or Equivalent

Quantity120

Rate-

Amount -

DIN Rail Surge Protection Device (4+0) Class B&C/ Type 1&2 with Total Impulse current-50 KA (10/350µ sec) & Total Max Discharge current 200KA (8/20µ sec), Voltage protection level 1.5 kV .The Surge Protection Devices should have TOV safefail for 120 Min : 442 V. Health Status Indication in all catridges.Total Response time 25 nano seconds. Protec T1 (4+0) or Equivalent

Quantity6

Rate-

Amount -

DIN Rail Surge Protection Device (4+0) Class B+C/ Type 1+2 with Total Impulse current-10 KA (10/350µ sec) & Total Max Discharge current 200KA (8/20µ sec), Voltage protection level 1.5 kV .The Surge Protection Devices should have TOV safefail for 120 Min : 442 V. Health Satus Indication in all the catridges.Total Response Time 25 nano seconds. Protec T2 (4+0) or Equivalent

Quantity6

Rate-

Amount -

Providing and laying copper coated steel solid round conductor 10mm diameter with copper coating thickness of 100microns for laying conductor after test link and for ring earthing at a depth of 0.5 meters from ground level. Needs to be routed inside heavy duty 20mm PVC pipe after test link @ a height of 2.5 meters from ground level. SRC 10-CU or Equivalent

Quantity590

Rate-

Amount -

Providing and fixing of Stainless Steel SS 304 Earth Rod Connection Point to insert 10mm Copper bonded steel to 20mm Copper Bonded rod. The Connection has to be strongly bonded using strong bolt. CPES 8 or Equivalent

Quantity120

Rate-

Amount -

Providing and fixing of 3m earth rod (with 14.2mm diameter and copper bonding thickness of minimum 250 microns) with with bore and peg arrangement. CBR 1410 or Equivalent

Quantity120

Rate-

Amount -

Providing and fixing of Earth Rod Clamp SS for easy insertion of earth rod to soil. ERC 1417 SS or Equivalent

Quantity120

Rate-

Amount -

Providing Earth Enhancing Mineral Compund (5kg) for improving earth soil conductivity. It should be pollution free and hazardous substances and chemically inert. Resistivity of the compound has to less than or equal to 0.2 ohm meter. PRO SAN 5 or Equivalent

Quantity240

Rate-

Amount -

Supply and installation of FRP Earth Electrode Inspection Chamber minimum dimenssion has to be 290x290x190mm. Minimum Weight Bearing Capacity has to be 60KN. EC 290 or Equivalent

Quantity120

Rate-

Amount -

FIRE FIGHTING WORKS

Quantity-

Rate-

Amount -

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia

Quantity6

Rate-

Amount -

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095. 100 nominal bore

Quantity28

Rate-

Amount -

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, rubber gaskets conforming to IS 13095. 80 nominal bore

Quantity4

Rate-

Amount -

Providing, installation, testing and commissioning of Cast Iron Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, gland packing, Double flanges, GI bolts, nuts, washers etc.as required :(Bronze wedge and SS spindle) 100 mm nominal bore

Quantity17

Rate-

Amount -

Supplying, installation, testing and commissioning of 3.7KW/5HP centrifugal Monobloc Pump Cast Iron Impeller and Mechanical Seal at 35Mtr the discharge will be (7.5 LPS),450 LPM. With PUMP PANEL enabling Auto/ manual operation

Quantity5

Rate-

Amount -

Supply, installation, testing and commissioning of Air Release Valve Gunmetal, conforming to IS 903:1993, having rubber ball with sealing seat and with 25mm. BSP threaded male inlet, including necessary accessories and connections.

Quantity12

Rate-

Amount -

Providing and fixing Pressure switch in pipe lineincluding connection etc as required

Quantity12

Rate-

Amount -

Supply, installation, testing and commissioning of Heavy Duty Neoprene Flexible Connectors, PN:16, with Spilt Retainer Rings and Control Units, drilled to BS 10 Table E including all other necessary fixing accessories. - 100mm.

Quantity12

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 100 mm dia

Quantity557

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 80 mm dia

Quantity225

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 65 mm dia

Quantity54

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories and threaded fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 50 mm dia

Quantity118

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories and threaded fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 40 mm dia

Quantity713

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories and threaded fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 32 mm dia

Quantity1393

Rate-

Amount -

Providing of following sizes of GI C class pipes conforming to IS-1239 with all accessories and threaded fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants.All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 25 mm dia

Quantity238

Rate-

Amount -

Supply, installation, testing and commissioning of flexible connector 80mm Dia

Quantity12

Rate-

Amount -

Providing and fixing forged brass Ball valve with forged brass ball suitable for operating pressure of not less than 16 kg / sq.cm of 25 mm dia

Quantity53

Rate-

Amount -

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetalcap and chain as required : (Single headed)

Quantity22

Rate-

Amount -

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetalcap and chain as required: (Single headed )

Quantity17

Rate-

Amount -

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Quantity48

Rate-

Amount -

‘Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 - 30m 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket

Quantity22

Rate-

Amount -

Supplying & fixing 63 mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:

Quantity22

Rate-

Amount -

S I T C of Double Hose Box (cabinet) 750mm x 650mm x250mm to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS powder coated with glass fronted hinged doors and lock.

Quantity22

Rate-

Amount -

S I T C of Hose Box (cabinet) to accommodate One pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS powder coated with glass fronted hinged doors and lock.

Quantity17

Rate-

Amount -

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as reauired: 4 way 150mm dia pipe

Quantity6

Rate-

Amount -

Supply and installation of ABC Stored pressure type Fire Extinguisher 4 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2006 with ISI mark.

Quantity41

Rate-

Amount -

Supply and installation of ABC Stored pressure type Fire Extinguisher 6 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder as per IS 14609 with ISI Mark for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket. The Extinguisher should be manufactured strictly as per IS: 15683:2006 with ISI mark

Quantity11

Rate-

Amount -

Supply and installation of Fire Extinguisher, Carbondi- oxide type capacity 4.5 Kg with provision of wall bracket (fixed with anchor fastner) or floor mounted ISI marked (IS:2878) Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket.

Quantity13

Rate-

Amount -

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories (UL listed & FM aproved) 68 Deg Centigrade Pendant sprinkler. K factor 5.6

Quantity54

Rate-

Amount -

Supply, installation, testing and commissioning of UL listed Quick response, pendant type sprinkler; thread size 3/4" NPT, K -8.0, Chrome finish; operating temperature at 68 degC with Sprinkler guard and Chrome finished water shield complete as required as per the technical specification.

Quantity252

Rate-

Amount -

Supply, installation, testing and commissioning of UL listed Quick response, pendant type sprinkler; thread size 3/4" NPT, K -8.0, Chrome finish; operating temperature at 68 degC complete as required as per the technical specification.

Quantity469

Rate-

Amount -

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. Length: 1000mm

Quantity54

Rate-

Amount -

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories (UL listed & FM aproved) 68 Deg Centigrade Upright sprinkler. K factor 5.6

Quantity54

Rate-

Amount -

Providing and fixing Flow switches in pipes including connection etc as required.

Quantity7

Rate-

Amount -

Supply, Installation, Testing and Commissioning of sight glass assembly of brass body and brass ball with chrome plated, steel handle, PN 16 or above UL listed and FM approved. The test and drain valve shall be with cmpact 3 positon ball valves with drain orifice having k factor 5.6 and a sight glass. Three positions OFF, TEST and DRAIN. The valve shall have grooved end connection and integral tamper resistant sight glass. The test and drain valve shall be in Brass ASTM B584 material of construction

Quantity7

Rate-

Amount -

Supply, Installation, Testing and Commissioning of installation control valve of Cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, flanges,GI pipe of required size, gasket etc. complete as required as per the technical specification. 100mm dia

Quantity4

Rate-

Amount -

Supply and installation of photoluminescent glow Signage such as Fire exit of standard size (300*150 MM) as per conventional design/ colour code on 3 mm thick Aluminum composite, panel conforming to IS 9457. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc.

Quantity35

Rate-

Amount -

Supply and installation of photoluminescent glow signage such as Fire Duct of standard size (300*150 MM) as per conventional design/ colour code on 3 mm thick Aluminum composite, panel conforming to IS 9457. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc.

Quantity23

Rate-

Amount -

Supply and installation of photoluminescent glow signage such as Assembly point of standard size (900*950 MM) as per conventional design/ colour code on 3 mm thick Aluminum composite, panel conforming to IS 9457. The signage will be either fixed on the wall with the help of screws & double tape or hanged from the false ceiling with the help of chain & screws etc.

Quantity6

Rate-

Amount -

Supply & installing in position laminated sheet of " FIRE EVACUATION PLAN " of suitable size fixed on wall & necessarry accessories to fix the plan on wall.

Quantity17

Rate-

Amount -

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 14846 of following sizes as required: 150mm dia

Quantity13

Rate-

Amount -

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 14846 of following sizes as required: 100mm dia

Quantity2

Rate-

Amount -

Providing laying, testing & commissioning of 100mm 'C' class heavy duty GI Pipe conforming to IS 1239 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc

Quantity927

Rate-

Amount -

Providing laying, testing & commissioning of 150mm 'C' class heavy duty GI Pipe conforming to IS 1239 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc

Quantity455

Rate-

Amount -

Supplying, installation, testing and commissioning of 12.5HP centrifugal Monobloc Pump Cast Iron Impeller and Mechanical Seal at 35Mtr the discharge will be 900 LPM. With PUMP PANEL enabling Auto/ manual operation

Quantity1

Rate-

Amount -

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia pipe connection conforming to IS 904 as reauired: 2 way 100mm dia pipe

Quantity3

Rate-

Amount -

FIRE SEALANT for Services Shafts - Supply and Fixing of load bearing Fire stop mortar system with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, for openings in floors or slabs after passing service lines. The mortar shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx.1 g/L as per LEED 2009. Firestop installation should be done by trained applicators (HAFSC) and in accordance with manufacturer's guidelines by providing 10mm dia rebars at 200mm c/c both ways with chemical anchoring along the length and breadh of the shaft and provide 2 layers of chicken mesh etc. The mortar shall be applied with a minimum thickness of 65 mm & having load bearing capacity of 200kg/sqm. Proper engineering judgement needs to be submitted through the manufacturer. Complete installation report through Software CFS DM shall also be submitted for inspection purpose.

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Horizontal type,multistage,centrifugal split casing Electrical Driven, Capacity: 2280 LPM at 70 Meter Head, conforming to IS 1520, with cast iron body, Bronze Impeller, S. S. Shaft, Mechanical Seal, High Efficient IE-3 rated, Squirrel Cage Induction Electric Motor, Suitable HP,synchronous speed 1500 RPM, TEFC,415 V, 3Ph, 50 Hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with class F insultation conforming to IS-325, complete with necessary concrete foundation duly plastered with antivibration pads, MS fabricated common base plate ,coupling, coupling gaurd, foundation bolts, as per requirement and necessary earthing of Electric Motors, etc. all as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions.

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of Stand By / Back Up Fire Pump,diesel engine Driven, suitable for Automatic operation and consisting of the following and complete in all respect as required; Capacity: 2280 LPM at 70 Meter Head ,horizontal type,multistage,centrifugal pump of cast iron body, Bronze Impeller, S. S. Shaft, Mechanical Seal,conforming to IS 1520 coupled to water cooled radiator, Diesel Engine, Suitable HP, 1500 RPM and with Control Panel with Auto Starting Facility, by activation of concerned Pressure Switch and thro. 12V/24 V Electric Starter, Battery of adequate rating and with Battery Charger, Battery Leads, Diesel Tank for 6 hrs operation, exhaust pipe extended up to 10 mtr outside pump house, duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification,stop solenoid for auto stop in the event of fault with auto indications,painted with post office red colour etc as required. Complete with necessary concrete foundation duly plastered with antivibration pads, MS fabricated common base plate ,coupling, coupling gaurd, foundation bolts, as per requirement and as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions.

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of electric driven pressurisation pump (Jockey Pump) suitable for automatic operation and consisting of following, complete in all respect as required as per technical specification (a) Horizontal type,multistage, centrifugal type pump of cast iron body,bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70 m head conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, suitable synchronous speed, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) Complete with necessary concrete foundation duly plastered with antivibration pads, MS fabricated common base plate ,coupling, coupling gaurd, foundation bolts, as per requirement and as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions.

Quantity2

Rate-

Amount -

Fabrication,supply,installation testing and commissioning of electric control panel of cubical construction,floor mounted type,fabricated out of 2mm thick CRCA sheet,compartmentalized withhinged lockable doors,dust and vermin proof,powder coated of approved shade after 7 tank treatment process,cable alley,inter connected with suitable size copper conductor cable solid copper strip,having switch gears and accessories,mountings and internal wiring,earth terminals,numbering etc complete in all respects,suitable for main fire pump,pressurization pump and diesel pump set complete as per CPWD specification with following incoming and outgoing suitable for operation on 415 V,3 phase 50 Hz Ac supply,with enclosure protection class IP 42 as required: INCOMING:400A,50 kA,4 pole MCCB,Ics=100% Icu rating digital volt meter0-500V with selector switch,digital ammeter(0-400A) with selector switch and CTs etc,LED type RYB phase indicating lamps,ON,OFF,trip indicating lamps,Set off copper bus bar 500A. OUTGOING(Note:All outgoing feeders for pump should have digital ammeter with selector switches,and LED type ON,OFF,trip indicating lamps)- MAIN FIRE PUMP:200A,50kA TPN MCCB,Ics=100% Icu, with fully automatic star/delta starter suitable for suitable HP pump with over load protection current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,slector switch for local/remote,auto/manual/off operation. JOCKEY PUMP: 100 A,50 kA,TPN MCCB,Ics=100% Icu,with suitable HP fully automatic star/delta starter with overload protection,current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation,selector switch for local remote,auto/manual/off opeartion. DIESEL ENGINE CONTROL:Control for diesel engine comprising -Automatic /Manual selector switch and 3 attempts starting device ,timers and relays as required,push buttons,start/stop in manual mode indicating lamp for high/low lub.oil pressure,high water remp and engine on indication,Battery charger suitable for 12V/24V DC with boost and trickle selector switch,0-30 V DC volt meter,and 0-20A DC ammeter.All standard relays for automatic operation of diesel engine.

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of Flexible connection with rods 150mm Dia

Quantity6

Rate-

Amount -

Supply, installation, testing and commissioning of pressure gauge 0-200 PSI (0 - 14 Kg ) range, 3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube and ball valve including fittings, etc. complete as required as per the technical specification.

Quantity7

Rate-

Amount -

Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories and painting with synthetic enamel paint of approved shade as required as per technical specification.

Quantity2

Rate-

Amount -

Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction pipe MS class 'C' 100 mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box M.S. construction with glass door to house the above mentioned components.

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of following sizes of GI C class pipes conforming to IS-3589 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants. Pipe supply Installation shall be done as detailed in technical specification. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 200MM dia

Quantity24

Rate-

Amount -

Supply, Installation, Testing and Commissioning of following sizes of GI C class pipes conforming to IS-1239 with all accessories like all fittings (standard GI fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) and vortex plates as per specification. MS pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls/floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants. Pipe supply Installation shall be done as detailed in technical specification. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. 150MM dia

Quantity48

Rate-

Amount -

Providing, installation, testing and commissioning of Cast Iron Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, gland packing, Double flanges, GI bolts, nuts, washers etc.as required :(Bronze wedge and SS spindle)200 mm nominal bore

Quantity1

Rate-

Amount -

Providing, installation, testing and commissioning of Cast Iron Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, gland packing, Double flanges, GI bolts, nuts, washers etc.as required :(Bronze wedge and SS spindle)150 mm nominal bore

Quantity3

Rate-

Amount -

Providing, installation, testing and commissioning of Cast Iron Non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, gland packing, Double flanges, GI bolts, nuts, washers etc.as required : (Bronze wedge and SS spindle) 80 mm nominal bore

Quantity2

Rate-

Amount -

Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095. 200 nominal bore

Quantity1

Rate-

Amount -

Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095. 150 nominal bore

Quantity6

Rate-

Amount -

Providing, installation, testing and commissioning of stainless steel Y-strainer with fabricated out of 1.6mm thick stainless steel,grade 304,sheet with 3mm dia holes with stainless steel flange complete as required as per the technical specification. 150 mm dia

Quantity3

Rate-

Amount -

Supply, Installation, Testing and Commissioning of installation control valve of Cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, flanges,GI pipe of required size, gasket etc. complete as required as per the technical specification. 150mm dia

Quantity1

Rate-

Amount -

Providing and fixing forged brass Ball valve with forged brass ball suitable for operating pressure of not less than 16 kg / sq.cm of 50 mm dia

Quantity2

Rate-

Amount -

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Quantity12

Rate-

Amount -

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Quantity12

Rate-

Amount -

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Quantity10

Rate-

Amount -

Supply, Testing and commissioning of Hooter

Quantity10

Rate-

Amount -

Supplying, fabricating and installing following size of perforated M.S. cable trays, including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including paint .100 mm width X 50 mm depth X 1.6 mm thickness

Quantity880

Rate-

Amount -

Supplying and laying of 2 core x 1.5 Sq. mm fire alarm armoured cable 600/1000v rated with annealed cpper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Quantity1897

Rate-

Amount -

Supply, Testing and commissioning of 4 zone conventional FACP

Quantity2

Rate-

Amount -

Supply, install, test and commission of16/32 bit intelligent Addressible Fire Alarm Control Panel with two loops ( each loop capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length 2km) including battery back up. The panel shall be microprocessor based with its own micro controller, memory, communicationmodule and fire device loop interface cards for indicating devices and should also be networkable in peer-to peer basis with other addressible fire alarm panels. The panel shall be able to give pin point loacation of all fire/fault conditions of addressible units via the address codes of each unit. The panel shall be able to automatically switch off all control switches whenever any alarm is triggered. The panel shall have key pad operation, LCD unit to indicate Fire/Fault signal of individual unit etc complete in all respects as per the technical specification and shall be UL listed and FM approved. The panel shall also have logic hardware and software built in to it for time delay operation of hooters and others as follows a) automatic system test activates b) detector sensitivity adjustments c) alarm verification d) Alpha neumerical display

Quantity4

Rate-

Amount -

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Quantity30

Rate-

Amount -

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Quantity10

Rate-

Amount -

Providing, fixing, test and commission Intelligent Addressable Heat Detector and with rate of rise of temperature feature, programmable for timed automatic sensitivity selection with Standard Base, junction box and other accessories. Detector shall be UL listed.

Quantity1

Rate-

Amount -

Providing, fixing, test and commission Intelligent Addressable Multi Sensor Detectors. The detectors shall have multiple sensitivity (adjustable at site) levels, programmable for timed automatic sensitivity selection complete with Standard Base, junction box and other accessories as required. Detectors shall be UL listed and FM Approved.

Quantity96

Rate-

Amount -

Supplying, installation, testing & commissioning of addressable Beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Quantity8

Rate-

Amount -

Providing, fixing, testing and commission Intelligent Addressable Input / Monitor Module, for interface with Flow Switches,Supervisory Switches, Alarm Valve, Water Tank Level etc.

Quantity8

Rate-

Amount -

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Quantity2

Rate-

Amount -

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Quantity10

Rate-

Amount -

Providing, fixing, test and commission of Sealed Lead Acid Battery 12 V DC x 7 Ah

Quantity8

Rate-

Amount -

Supply, install, test and commission of Console for Public address and TalkBack system consisting of 6 zones with Mike and selector.Complete with 2 x 16 character LCD display, battery charger, battery housing, 8WPA & mic, 6 channel selector with all call and mic. The console shall be provided with suitable capacity amplifier and suitable capacity battery (minimum 12V) all assembled in a cabinet.

Quantity2

Rate-

Amount -

Supply, installation, testing and commisioning of Public Address speaker with talk back facility 6 Watts with L M T and call switch, made out of powder coated CRCA sheet, wall mounting type and to be installed at a height of not less than 150 CM from the finished floor levels, suitable for concealed mounting.

Quantity5

Rate-

Amount -

Elevators

Quantity-

Rate-

Amount -

Supply, installation testing and commissioning of Passenger Lift- 544Kg ( with machine room),8 persons, 8 stops and 8 openings. Automatic door.Car finished with stainless steel and Stainless steel hand rail at rear wall. Lift shall have Emergency Rescue Device with audio announcer and 2 Way Dedicated Intercom

Quantity1

Rate-

Amount -

Supply, installation testing and commissioning of Service Lift- 680Kg ( with machine room),10 persons, 8 stops and 8 openings. Automatic door.Car finished with stainless steel and Stainless steel hand rail at rear wall. Lift shall have Emergency Rescue Device with audio announcer and 2 Way Dedicated Intercom

Quantity1

Rate-

Amount -

HVAC

Quantity-

Rate-

Amount -

Supply, installation testing and commissioning of 1 TR minimum capacity Hi wall Split inverter air conditioning unit (Indoor and Outdoor Unit) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply minimum 3 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R410A/R407C, cordless remote etc complete as required as per specification/ISHRAE standards.

Quantity8

Rate-

Amount -

Supply, installation testing and commissioning of 1.5TR Hi wall Split air conditioning units (Indoor and Outdoor Units) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R410A/R407C, cordless remote etc complete as required as per specification/ISHRAE standards.

Quantity9

Rate-

Amount -

Supply, installation testing and commissioning of Hi wall Split air conditioning units (Indoor and Outdoor Units) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor, outdoor unit and hi wall units for single phase 230 V supply minimum 5 star rated as per BEE and with suitable stabilizer with necessary supports vibration isolators suitable as required as per manufacturers recommendation, suitably sized copper refrigerant piping as per relevant ASHRAE Standards (both suction and liquid piping) including 19 mm thick closed cell nitrile rubber insulation as per specification interconnecting indoor & outdoor units with required pipe fittings and accessories like bends, tees, reducers, supports finished with 7 mils factory laminated treated fibre glass cloth, necessary power/control cabling, suitably supported on trays/ split clamps etc., CPVC condensate drain pipe (upto 5 m) 6kg/sq.cm of suitable dia connecting the drain pan of the indoor units to nearest drain point with U-trap, insulated with 9 mm thick closed cell nitrile rubber insulation, required pipe fittings and accessories like bends, tees, reducers, supports, clamps, finished with 7 mils factory laminated treated fibre glass cloth, first charge refrigerant gas R410A/R407C, cordless remote etc complete as required as per specification/ISHRAE standards 2.0TR

Quantity13

Rate-

Amount -

Toilet exhaust Grilles 225 x 225 of Aluminium

Quantity29

Rate-

Amount -

Exhaust louver for exhaust from Toilets

Quantity1

Rate-

Amount -

Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±5% volt single phase 50 cycles AC supply & meeting criterion as per ASHRAE standard 90.1-2010 and high efficiency (IS 12615). Quoted price shall be inclusive of electronic speed regulator and wiring between fan & speed regulator for single phase fans. Incase of 3 phase fans quated price shall be inclusive of DOL starter panel with cabling between starter panel and fan. The incoming power supply to speed regulator / starter panel shall be provided by electrical contractor. Contractor to select suitable static. INLINE FANS 150 CFM

Quantity3

Rate-

Amount -

Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±5% volt single phase 50 cycles AC supply & meeting criterion as per ASHRAE standard 90.1-2010 and high efficiency (IS 12615). Quoted price shall be inclusive of electronic speed regulator and wiring between fan & speed regulator for single phase fans. Incase of 3 phase fans quated price shall be inclusive of DOL starter panel with cabling between starter panel and fan. The incoming power supply to speed regulator / starter panel shall be provided by electrical contractor. Contractor to select suitable static. INLINE FANS 350 CFM

Quantity1

Rate-

Amount -

Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±5% volt single phase 50 cycles AC supply & meeting criterion as per ASHRAE standard 90.1-2010 and high efficiency (IS 12615). Quoted price shall be inclusive of electronic speed regulator and wiring between fan & speed regulator for single phase fans. Incase of 3 phase fans quated price shall be inclusive of DOL starter panel with cabling between starter panel and fan. The incoming power supply to speed regulator / starter panel shall be provided by electrical contractor. Contractor to select suitable static. INLINE FANS 200 CFM

Quantity2

Rate-

Amount -

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.63 mm thick

Quantity6

Rate-

Amount -

Supplying, installing, testing and commissioning of Wall mounted Industrial Axial exhaust fan with self opening lowers working on 230V single phase A/C. 450 mm sweep

Quantity9

Rate-

Amount -

Supplying, installing, testing and commissioning of Wall mounted Industrial Axial exhaust fan working on 230V three phase A/C. 600 mm sweep. 900 RPM

Quantity16

Rate-

Amount -

Total in Figures

Quantity-

Rate-

Amount -

Quoted Rate in Figures

Quantity-

Rate-

Amount -

Quoted Rate in Words

Quantity-

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.