Kerala Water Authority Tender

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

18.70.9:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:500 mm dia pipes

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

OD220401/2024-2025:Hire and running charges of Tempo for conveying Generator,welding machine and vice versa

100.98.1008:Engaging Coolie.

OD220403/2024-2025:Construction of temporary bund using earth filled cement bags including cutting of the Earth, filling, conveying and placing in position, Filling with contractor's own earth (excluding rock) in the core portion of the earthen bund by consolidating each deposited layer by ramming and watering, Supplying, conveying and covering using best quality polythene sheet on bund to protect bund from seasonal changes, Conveying and providing bamboo poles at the rates of 3m per 4m3 (1m each in longitudinal, horizontal and vertical directions) for reinforcing the temporary bund, dismantling the sand / earth filled cement bag from the foundation site of bund, apron on both sides, counter wall and removing the sand/earth from the bag and disposing the damaged cement bags properly as per the direction of the department officers including all cost, labour charges and hire for tools and plant etc complete.

OD220402/2024-2025:labour for cutting existing 500mm dia DI pipe and 500mm MS pipe

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

100.14.9:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 500mm diameter Ductile Iron Class K-9 Pipes.

OD220407/2024-2025:Supply and onsite fabrication of 500mm dia 45 degree bend with 10mm thickness (plus or minus 5 degree variation will be there based on existing transmision main alignment, cost include interconnecting the fabricated bend with with 500 DI line,flanges,nut ,bolt,IR Sheet)

OD220408/2024-2025:Charges for transportation,lifting the 500 mm DI pipes using Heavy weight loadable crane from Neyattinkara Division store and stacking the pipe in Sastri nagar worksite

100.31.2.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class II.

100.98.469:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm.

OD220448/2024-2025:Supplying and fixing 90mm CIR

OD220449/2024-2025:Taking connection from the existing main(single boring) including earthwork excavation,supplying and fitting 25mm saddle piece,boring the main,supplying and fitting 25mm brass ferrule 1no,25mm GM full way wheel valve 1no,bend1no,union 1no,etc and connecting the newly laid main,testing the joints etc complete.

OD221143/2024-2025:Supply and fabrication of 500mm dia mechanical joint including cost for interconnecting the fabricated mechanical joint with with with 500 DI/MS Transmission line)

OD221152/2024-2025:Hiring charges of crane for lifting the MS pipe/500mm DI pipe including the labour cost