Kerala Veterinary And Animal Sciences University Tender

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od156847/2024_2025 : Supply, Installation, Testing & Commissioning of Three phase meter box, cubicle type, made out of 2 mm thick CRCA sheet, wall mounting, dust and vermin proof, powder coated, outdoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50 Hz AC system including internal wiring with suitable size wires, rotary handle, spreaders, 3 mm thick gland plate, hinged type door with neoprene gasket etc. The panel shall include supply &installation of following switch gears, metering instruments and accessories as per specification. Switch gear & other Accessories with CT Chamber and Canopy covering at head from rain protection. Also 125 A 4P 35/36 kA(Ics=100%Icu), 4 pole, current limitting type MCCB with microprocessor based release -1 No,ELR WIth CBCT and shunt triping coil - 1 set ,125 A cut out fuse unit with fuse-3 Nos and 1 No Neutral link, , CT 150/5,10 VA,0.2 class with size ,40 mm- 4 Nos,Cu busbar etc complete. (The Contractor should produce sufficient test certificates as per the Electrical Inspectorate & KSEB standards, and should consult with engineer in charge before execution).(Minimum size of panel should be 1X1X0.30 Mtr)

od156848/2024_2025 : supply of 7/3.15 mm size HT stay wire

od156849/2024_2025 : Labour charge for checking and reconnecting panel cables in the existing panel<br>with load rating

od156850/2024_2025 : Preparation of necessary drawings, forms of KSEB with licensed persons certificate and signature and submission of concerned Electrical section Mannuthyfor obtaining three phase CT metered connection for the ASB block.

civil

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.