Kerala Veterinary And Animal Sciences University Tender

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

od97703/2024_2025 : Preparation of necessary drawings, forms of KSEB with licensed persons certificate and signature and submission of concerned Electrical section Mannuthyfor obtaining three phase CT metered connection for the ASB block.

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

od98514/2024_2025 : Labour charge for checking and reconnecting panel cables in the existing panel<br>with load rating at ASB

od100030/2024_2025 : supply of 7/3.15 mm size HT stay wire for tightening the cable with pole

od100114/2024_2025 : Supply, Installation, Testing & Commissioning of Three phase meter box, cubicle type, made out of 2 mm thick CRCA sheet, wall mounting, dust and vermin proof, powder coated, outdoor, compartmentalized, suitable for operation on 3 phase and neutral, 415 V, 50 Hz AC system including internal wiring with suitable size wires, rotary handle, spreaders, 3 mm thick gland plate, hinged type door with neoprene gasket etc. The panel shall include supply &installation of following switch gears, metering instruments and accessories as per specification. Switch gear & other Accessories with CT Chamber and Canopy covering at head from rain protection. Also 125 A 4P 35/36 kA(Ics=100%Icu), 4 pole, current limitting type MCCB with microprocessor based release -1 No,ELR WIth CBCT and shunt triping coil - 1 set ,125 A cut out fuse unit with fuse-3 Nos and 1 No Neutral link, , CT 150/5,10 VA,0.2 class with size ,40 mm- 4 Nos,Cu busbar etc complete. (The Contractor should produce sufficient test certificates as per the Electrical Inspectorate & KSEB standards, and should consult with engineer in charge before execution).(Minimum size of panel should be 1X1X0.30 Mtr)

Appendix B:Installation of street light

od68977/2024_2025 : Providing, Installation, testing and commissioning of street light 40/45 W LED<br>(Philips, Bajaj, Luker or Equivalent)