Kerala Veterinary And Animal Sciences University Tender

90.12.7.31 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.7.32 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm

90.12.1.31 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 95 sq mm

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.2.21 : Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 95 sq. mm

od340812/2023_2024 : Supply and Fixing crimping type Aluminium tubular lugs/ terminals suitable for 3.5c x 120sqmm Al conductor armoured cable complete with all necessary consumables. MAKE: DOWELLS/ COMET

od340813/2023_2024 : Supply and Fixing crimping type Aluminium tubular lugs/ terminals suitable for 3.5c x 95sqmm Al conductor armoured cable complete with all necessary consumables. MAKE: DOWELLS/ COMET

SWITCHGEAR

2.1.6 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.200 Amp TP&N

2.1.7 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.320 Amp TP&N

2.2.15 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required200 Amp, 36 KA

2.2.16 : Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required250 Amp, 36 KA

90.14.11.13 : MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

LIGHTING

90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

od335928/2023_2024 : Engaging electrician for repair/maintenance

od354928/2023_2024 : Supply and fixing of 20W LED Batten, 6500K, CRI>80, min average life 20k hrs, polycarbonate housing, min 100lm/W, 1200mm on wall/ ceiling complete with all necessary consumables. MAKE: Philps/Bajaj/Havells or equivalent

FINAL DISTRIBUTION

od335786/2023_2024 : Supply and Fixing LED Indication lamps -RED(ON), 1 no, 22.5 mm, 230 Vac in existing enclosure/ panel complete with all necessary consumables. MAKE: ESBEE/ REPUTED or Equivalent

od335902/2023_2024 : Supply and Fixing IP-65 MCB enclosure - 4M with transparent door on existing wall/ structure complete with all necessary consumables- 52x202x117mm.

od335903/2023_2024 : Supply, fabrication, painting and fixing of cable trays, supports and panel/DB frames fabricated out of Mild Steel equal angles, flats, plates, channels etc duly painted with 2 coats of epoxy primer and fixing on wall/surface/floor/structure using suitable expansion bolts or grouting as necessary.<br>ISA upto 40x40x5mm, MS Flat upto 25x3mm, Base plate 100x100x6mm, ISMC 75x40x6mm.<br>

od338517/2023_2024 : Design, fabrication, supply, installation, testing and commissioning of dust, damp and vermin proof wall/ floor/ structure mounted, outdoor type, factory fabricated sheet steel full enclosed IP-67 enclosure suitable for 433V, 50Hz, 3phase 4 wire system fabricated with suitable Galvanized structural sections and with 2mm thick CRCA sheet steel/ GSS, 14G/2mm for framework, doors, partition, supports and covers, 3mm for removable gland plate. Enclosure should be cleaned and finished with alkyd melamine epoxy based powder coating , pre-treatment by 7 or 9 tank process in RAL 7032/ 7035 or approved shade, min 3mm thick FRP/Polycarbonate/PVC shrouding, base channel min 75X40x6mm, provision for bottom cable entry, door locking, type tested and confirming to IEC 61439 and other relevant IS standards. Enclosure approx size: 600 x 600 x 200mm. Vision panel for viewing the condition of breaker/ fuse and provision for earthing to be provided.

od339572/2023_2024 : Supply and Fixing 125A HRC fuse base with fuse link in existing enclosure/ Panel complete with all necessary consumables.

od339573/2023_2024 : Supply and Fixing 160A HRC fuse base with fuse link in existing enclosure/ Panel complete with all necessary consumables.

od339574/2023_2024 : Supply and Fixing 250A HRC fuse base with fuse link in existing enclosure/ Panel complete with all necessary consumables.