Kerala State Nirmithi Kendra Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 2,500Tender Fee
Refer Documents
Summary
Renovation Works Of Various Family Welfare Centres In Kottayam District
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_KSNK_654176_1Bid Award Id
ViewTender No
KSNK/TECH/PALA/RFWC-132R2/2024Tender Authority
Kerala State Nirmithi Kendra ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
0.63
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
116.04
-
-
... More
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.1
-
-
... More
50.9.2.1
Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm
thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding panelling which will be paid for separately, all complete as per direction of
Engineerin - charge.using Anjili/ Jack wood
3.6
-
-
... More
5.47.2
Providing and fixing in position factory made precast RCC M-40 doors and win frames having excellent
smooth finish as per IS:6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S
stirrups placed @ 200 mm CC nad 6 numbers high strength polymer blocks of required size for fixing
hinges including providing 6 no specially designed M.S galvanised sleeves for accomodating 6 mm dia
fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for receiving sliding door bolts and tower bolt etc all complete, as per the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix is also included in the item.) The frame shall be measured in running meter correct to two places of decimal.Door frame 100 mm x 60 mm.
56.8
-
-
... More
50.9.5.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.
10.35
-
-
... More
4.3.3
Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers,
abutments, pillars, posts and struts
3.84
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.24
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
2.4
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
15
-
-
... More
4.1.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
0.41
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
669.71
-
-
... More
od205511/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
28.12
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
3.61
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
89.09
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
16.45
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
10.26
-
-
... More
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour,
design& pattern.
15.6
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be
moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
11.4
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with
wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to
frames.
3.2
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
10.26
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architecturaldrawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
9
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
52.23
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
445.15
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
90.01
-
-
... More
13.99.1
Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an
even shade :One or more coats on old work
22.07
-
-
... More
NATIONAL HEALTH MISSION - PROPOSED EXTENTION AND RENOVATION WORK FOR AVARMA SUB CENTER IN MULAKKULAM GP
-
-
-
... More
1 EXTENTION AND MAINTENANCE WORK
-
-
-
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
7.15
-
-
... More
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality
blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials
labour charges etc. complete as per direction of Departmental officers at site
7.15
-
-
... More
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cementconcrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinthlevel with:Cement mortar 1:6 (1 cement : 6 coarse sand)
3.98
-
-
... More
50.6.1.7
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1cement : 6 coarse sand ) etc complete
7.49
-
-
... More
5.1.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
0.39
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
0.26
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).Second class teak wood
0.22
-
-
... More
9.5.1.2
Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and
clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of
Engineer - in-charge.Providing and fixing panelled or panelled and glazed shutters for doors, windowsand
clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling
which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges
and necessary screws shallbe paid separately)Second class teak wood30 mm thick shutters
10.05
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be
moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
5.7
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with
wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to
frames.
1.58
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
73.36
-
-
... More
od205754/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
44.5
-
-
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
0.36
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
2.08
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the jointswith white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
19.21
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
26.99
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
5.26
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
143.59
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
143.59
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied
@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
143.59
-
-
... More
13.50.3
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel galvanised iron /steel works
123.72
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
123.72
-
-
... More
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
1.68
-
-
... More
od205756/2023_2024
Providing and fixing Pre-laminated flat pressed 3 layer (medium density)particle board or graded wood
particle board IS :3087 marked,with both side decorative Grade 1,Type 2 exterior grade IS:12823
marked,in shelves with screws and fittings wherever required,edges to be laminated using resin
lamination (fittings to be paid separately) 25mm thick
4.56
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium
(minimum
12.75
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
2.61
-
-
... More
od205757/2023_2024
Providing and cupboard using marine plywood of standard quality satisfying ISI requirements jointing the plywood using nails and adhesives etc complete, 16mm thick marine plywood
5.88
-
-
... More
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and
pattern.
12.6
-
-
... More
od205758/2023_2024
Supplying office chair
4
-
-
... More
NATIONAL HELTH MISSION- RENOVATION WORK OF F.W.C BHARANANGANAM AT BHARANANGANAM G.P
-
-
-
... More
1 Building Maintenance
-
-
-
... More
4.3.3
Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers,
abutments, pillars, posts and struts
5.03
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.76
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
52
-
-
... More
4.1.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
0.1
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
867.75
-
-
... More
od203052/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
19.2
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
2.45
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
29.85
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0
mm thickness
10.38
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
20.34
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
5.48
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
25.45
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
8.28
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
31.2
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
325.32
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
347.75
-
-
... More
13.99.1
Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an
even shade :One or more coats on old work
27.66
-
-
... More
od204864/2023_2024
Supplying office chair
4
-
-
... More
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour,
design& pattern.
22.05
-
-
... More
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
0.76
-
-
... More
od204927/2023_2024
Name Board
1
-
-
... More
NATIONAL HELTH MISSION- RENOVATION OF F.W.C AT IDAPPADY BHARANANGANAM G.P
-
-
-
... More
1 EXTENTION AND MAINTENANCE WORK
-
-
-
... More
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50 m.All kinds of soil
5.13
-
-
... More
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality
blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials
labour charges etc. complete as per direction of Departmental officers at site
5.13
-
-
... More
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cementconcrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinthlevel with:Cement mortar 1:6 (1 cement : 6 coarse sand)
2.89
-
-
... More
50.6.1.7
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1cement : 6 coarse sand ) etc complete
5.79
-
-
... More
5.1.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size)
0.43
-
-
... More
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
40
-
-
... More
9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).Second class teak wood
0.1
-
-
... More
9.5.1.2
Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and
clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of
Engineer - in-charge.Providing and fixing panelled or panelled and glazed shutters for doors, windowsand
clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling
which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges
and necessary screws shallbe paid separately)Second class teak wood30 mm thick shutters
5.16
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be
moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
5.7
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with
wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to
frames.
1.58
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
26.48
-
-
... More
od200323/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
26.37
-
-
... More
od200419/2023_2024
Providing ridges or hips with 60cm overall width plain GS sheet fixed with polymer coated J or L hookes,bolts and nuts 8mm dia GI limpet and bitumen washers complete.(0.40mm thick zinc coating sheet is used)
8.24
-
-
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
1.4
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
1.43
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the jointswith white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
14.28
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
32.91
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
6.46
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
71.76
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
76.92
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied
@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
262.12
-
-
... More
13.50.3
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel galvanised iron /steel works
178.58
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
104.83
-
-
... More
8.2.2.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area
of slab over 0.50 sqm
4.18
-
-
... More
od200715/2023_2024
Providing and fixing Pre-laminated flat pressed 3 layer (medium density)particle board or graded wood
particle board IS :3087 marked,with both side decorative Grade 1,Type 2 exterior grade IS:12823
marked,in shelves with screws and fittings wherever required,edges to be laminated using resin
lamination (fittings to be paid separately) 25mm thick
12.55
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
33.96
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
13.58
-
-
... More
od200732/2023_2024
Providing and cupboard using marine plywood of standard quality satisfying ISI requirements jointing the plywood using nails and adhesives etc complete, 16mm thick marine plywood
8.82
-
-
... More
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and
pattern.
18
-
-
... More
od205758/2023_2024
Supplying office chair
4
-
-
... More
od200759/2023_2024
Name Board
1
-
-
... More
NATIONAL HEALTH MISSION - PROPOSED RENOVATION WORK FOR KEEZHOOR SUB-CENTER IN MULAKKULAM G.P.
-
-
-
... More
1 Building Maintenance
-
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
771.12
-
-
... More
od206637/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
55.38
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
30.4
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
24.21
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
287.86
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
709.68
-
-
... More
13.99.1
Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an
even shade :One or more coats on old work
28.77
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
20.1
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
5.28
-
-
... More
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour,
design& pattern.
53.26
-
-
... More
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
1.04
-
-
... More
od204927/2023_2024
Name Board
1
-
-
... More
Maintenance of Family welfare Centre at Pakkaanam Subcentre NHM in Erumeli G.P.
-
-
-
... More
1 Building Maintenance
-
-
-
... More
15.13.1
Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50
metres lead:Of area 3 sq. metes and below
2
-
-
... More
15.28.1
Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50
metres lead of :G.S. Sheet
15.6
-
-
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
0.63
-
-
... More
15.3
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal
of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
0.5
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
158.5
-
-
... More
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.15
-
-
... More
50.9.2.1
Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm
thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding panelling which will be paid for separately, all complete as per direction of
Engineerin - charge.using Anjili/ Jack wood
3.6
-
-
... More
50.9.5.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.
1.26
-
-
... More
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
14.52
-
-
... More
4.3.3
Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers,
abutments, pillars, posts and struts
3.84
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.24
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
2.4
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
156
-
-
... More
4.1.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
0.49
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
782.25
-
-
... More
od197277/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
48.54
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
4.87
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
61.02
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
8
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
10.26
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be
moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
11.4
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with
wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to
frames.
3.2
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
10.26
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
12
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
121.23
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
465.15
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
85.49
-
-
... More
13.99.1
Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an
even shade :One or more coats on old work
41.36
-
-
... More
17.18.1
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever)
conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White
1
-
-
... More
NATIONAL HELTH MISSION-PROPOSED RENOVATION WORK FOR PIZHAKU F.W.C IN KADANADU G.P
-
-
-
... More
1 Building Maintenance
-
-
-
... More
4.3.3
Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers,
abutments, pillars, posts and struts
4.16
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.29
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
19.5
-
-
... More
4.1.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
0.26
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
579.86
-
-
... More
od205495/2023_2024
Roofing with GI trafford profile sheet 0.35mm thick, powder coated with overlaps of 150mm at ends and
SS screw including plain washers and bitumen washers etc complete
43.92
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
2.78
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
25.2
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
10.08
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
29
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
6.27
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
26.38
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
17.22
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
30.36
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
331.9
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
458.2
-
-
... More
od205496/2023_2024
Supplying office chair
4
-
-
... More
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour,
design& pattern.
22.05
-
-
... More
8.2.2.1
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm
0.29
-
-
... More
od205497/2023_2024
Name Board
1
-
-
... More
NATIONAL HEALTH MISSION - PROPOSED RENOVATION WORK FOR PULIYANNOOR SUB-CENTER IN MUTHOLY GP
-
-
-
... More
1 EXTENTION AND MAINTENANCE WORK
-
-
-
... More
50.6.1.7
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
0.52
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
263.71
-
-
... More
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
nominal size)
3.4
-
-
... More
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
26.93
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
12.54
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
2.49
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
17.85
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
109.66
-
-
... More
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied
@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
109.66
-
-
... More
13.50.3
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel galvanised iron /steel works
275.81
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
275.81
-
-
... More
od207026/2023_2024
Providing and fixing Pre-laminated flat pressed 3 layer (medium density)particle board or graded wood
particle board IS :3087 marked,with both side decorative Grade 1,Type 2 exterior grade IS:12823
marked,in shelves with screws and fittings wherever required,edges to be laminated using resin
lamination (fittings to be paid separately) 25mm thick
5.76
-
-
... More
121.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium(minimum)
27.6
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
12.96
-
-
... More
od207027/2023_2024
Providing and cupboard using marine plywood of standard quality satisfying ISI requirements jointing the plywood using nails and adhesives etc complete, 16mm thick marine plywood
8.82
-
-
... More
16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,
lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table
vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of
sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding
layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver
blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction
of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and
pattern.
33.94
-
-
... More
od207054/2023_2024
Supplying and installing ready made Soak pit including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge
2
-
-
... More
od207028/2023_2024
Supplying office chair
4
-
-
... More
od207029/2023_2024
Name Board
1
-
-
... More
Maintenance of Family welfare Centre at Vattukulangara NHM In Kidangoor GP
-
-
-
... More
1 Building Maintenance
-
-
-
... More
15.13.1
Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50
metres lead:Of area 3 sq. metes and below
4
-
-
... More
15.7.4
Demolishing brick work manually / by mechanical means including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In
cement mortar
0.63
-
-
... More
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
138.1
-
-
... More
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
18.7
-
-
... More
50.9.1.1
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.31
-
-
... More
50.9.2.1
Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm
thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with
necessary screws, excluding panelling which will be paid for separately, all complete as per direction of
Engineerin - charge.using Anjili/ Jack wood
3.6
-
-
... More
50.9.5.1
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.
5.04
-
-
... More
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
58.08
-
-
... More
4.3.3
Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers,
abutments, pillars, posts and struts
3.84
-
-
... More
5.3
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
0.24
-
-
... More
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,
landings, balconies and access platform
2.4
-
-
... More
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
156
-
-
... More
4.1.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
0.49
-
-
... More
10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.Hot finished welded type tubes
521.59
-
-
... More
50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
3.34
-
-
... More
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
74.97
-
-
... More
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
9.7
-
-
... More
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the
manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigment etc., complete.
10.26
-
-
... More
9.121
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm
having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be
moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
11.4
-
-
... More
9.122.1
Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled
door shutter of required colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with
wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast
monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to
frames.
3.2
-
-
... More
8.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified
by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,
including pointing in white cement mixed with pigment of matchingshade complete.
10.26
-
-
... More
21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood
particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows
shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architecturaldrawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
14.4
-
-
... More
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall
surface:Water thinnable cement primer
102.03
-
-
... More
13.98.1
Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One
or more coats on old work
445.15
-
-
... More
13.52.1
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On
steel work
76.86
-
-
... More
13.99.1
Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an
even shade :One or more coats on old work
41.36
-
-
... More
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat
and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and
making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
2
-
-
... More
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,
with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
500
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements