Kerala State Nirmithi Kendra Tender

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.12.2 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13 Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

od327241/2023_2024 Providing and fixing Hydraulic door closer bottle typr M.S body with neccessary accessories and screws etc complete

od327257/2023_2024 Providing modular work station using 1" nova pan on table top and 3/4" nova pan are side pannel and drawyer keyboard etc, and the edges are finishing with pvc ban of suitable colour of nova pand providing telescao channel on keyboard tray, drawyers and providing handles, locking arrangements etc, complete- Rectangular work station 0.9x.6m

od327284/2023_2024 Supplying visitor chair with arm

od333001/2023_2024 Supplying office chair (high back)

od333009/2023_2024 Internal name board size 2.5 ft x 1.5 ft using acrylic sheet base with Reflective type sticker as per required shade and color etc complete

9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

50.12.4.2 Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

21.5 Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

Supplying and installation ,testing and commissioning of air cooled high wall mounted split air conditioner of 1 TR capacity consisting of high wall mounted type room with cordless remote control & 1 No. outdoor condensing unit comprising of energy efficient suitable rotary compressor for operation on single phase,230 V , 50 Hz supply, fixing the outdoor unit on raised platform as per manufactures recommendation & fixing of room (fan coil) unit on wall up to 10m distance refrigerant copper piping with 13 mm nitril rubber insulation, providing & making inter connection between room & condenser as per site conditions ,comprising of 1” dia drain PVC pipe with insulation 10 m,canvas connection, full 2.5 mm electrical cabling from D B to indoor unit & outdoor unit, vibration isolation ,ODU MS stand ,first charge refrigerant gas, in 5 start rated as per BEE suitable stabilizer etc. Complete as required.1 Year full Warranty & 5 year Compressor Warenty, Inverter AC (Brand – LLOYD, Blue Star)