Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Construction Of National Adventure Academy At Devikulam, Munnar.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_KSITI_533108_1Bid Award Id
ViewTender No
KSITIL/KSYWB/2022-23/14Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
123.84
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
9130
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
583.2
-
-
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4950
-
-
20.1.1 : Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):400 mm dia piles
342
-
-
5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level
47.49
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
3600
-
-
2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth
1
-
-
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
1
-
-
2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth
6
-
-
2.33.4 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth
4
-
-
20.1.3 : Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):500 mm dia piles
84
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
297.05
-
-
5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level
72.8
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
400
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
257.29
-
-
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
14.05
-
-
2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
170
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/
230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V
level with RCC band at sill level and lintel level with approved block laying polymer
modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for seperately).
72.63
-
-
od75393/2022_2023 : Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
55
-
-
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
668.79
-
-
13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).
668.79
-
-
22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
37.08
-
-
22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
270.5
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
668.79
-
-
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
668.79
-
-
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
1337.58
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
690
-
-
od75386/2022_2023 : Supply and fixing of 0.8mm thk decking sheet manufactuared from hot dipped zinc coated high strength steel with minimum 340MPa yield strength and coating mass of AZ120 (min 120 gsm total of zinc coating on both sides) and approved studs are included with all cost of materials, labour charges etc.
490
-
-
od75394/2022_2023 : Filling good earth (brought from outside) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering including carriage of earth.
10
-
-
13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including
priming coat of exterior primer applied @ 0.90 litre/10 sqm.
668.79
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
448.49
-
-
od75396/2022_2023 : Providing and laying LEPPATO FINISHED Granite stone laying in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Architect
33.32
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
6
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
280.92
-
-
od75397/2022_2023 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
72.1
-
-
od75385/2022_2023 : Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 100 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
105
-
-
od75388/2022_2023 : Providing and laying Glazed Vitrified tiles Matt/Antiskid finish in floor of size 600 x 600 mm (thickness to<br>be specified by the manufacturer) with water absorption less than 0.08%<br>and conforming to IS:15622, of approved brand & manufacturer, in all<br>colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:<br>4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including<br>grouting the joints with white cement and matching pigments etc. The<br>tiles must be cut with the zero chipping diamond cutter only . Laying of<br>tiles will be done with the notch trowel, plier, wedge, clips of required<br>thickness, leveling system and rubber mallet for placing the tiles gently<br>and easily.
60.48
-
-
od75398/2022_2023 : Providing, supplying and fixing aluminum expanded metal mesh panels, with pre-powder coated finish. The sheet shall be fixed using self drilling/ self tapping SS screws and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, all complete as per drawings, specification and direction of the Engineer in Charge
70
-
-
od75390/2022_2023 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
290.86
-
-
od75399/2022_2023 : Providing and fixing of Hollow metal door at all levels from ISO 9001-2000 certified Manufacturer. The metal doors should be made from high grade galvanised steel stretched level sheet flush, with vision panel, louvers etc. Single /Double leaf to required sizes and approved make shakti met-dor or equivalent which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277. Door frame shall be single rebate profile of size 100 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet (18 gauge ). Frames should be mitered and field assembled with self tabs. Door frames should be prepared for suitable hardware as scheduled and should have necessary reinforcement to withstand regular wear and tear. All provision should be mortised, drilled and tapped for receiving the hardware. Rubber door silencers should be provided on the striking jamb. All door frames should be provided with backplate and anchor fasteners for installation on a finished plastered masonry wall opening. Once the frame is installed it should be grouted with cement & sand slurry.Door leaf should be 46mm thick flush double skin door with vision panel of suitable size. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid with steel stiffeners/ pads and reinforcement. The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, shaft locks, flush pull and tower bolt etc. The edges should be interlocked with lock seam. For pair of doors astragals will be provided as required. 450x750mm Vision lite wherever applicable should be of size fixed with rubber beeding. The glass should be 4mm clear toughned glass. All doors and frames shall be finished with polyurethane aliphatic grade powder coating minimum of 50 microns of approved colour. The door leaf and frame shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. a). Steel Door TD1 Single leaf 600x1500mm without vision panel with frame on Four sides & hardware set ,Hinges 3090 F, 5 Knl, 2 Ball bearing butt hinges size 4" x 3" x 3mm SS 304, Mortice Shaft Dead lock with Allen key 8681, SSS, Flush Pull Handle 1208, OVAL, SSS
18
-
-
od75391/2022_2023 : Providing and fixing UPVC Factory Made ,white/Yellow colour casement /Sliding window,Louvers and door made of extruded profiles.Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc. making arrangments for fixing of hardware,EPDM gasket,1.2 & plus mn,0.2 mm thick galvanised steel profile to be incldued in required profile ,frame will be fixed to the wall with 8 mm x 100 mm long fasteners , all complete as per direction of Engineer in Charge ,The rate is inclusive of 6 mm Galzing,Louvers,Loks,Hardware hinges,handles and fiting etc.
261.03
-
-
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
54.69
-
-
od246428/2022_2023 : Prefabricated structural steel work riveted, bolted, or welded in built up sections, trusses, Built-Up/HR sections/Bracings, and framed work including supply & fixing of anchor bolts & base plates, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and epoxy painting 2 coats with approved quality epoxy paint all complete. The steel structure is to be designed fabricated, supplied, and erected through Pre-Engineering and the design shall be got approved from Client.
46500
-
-
od246740/2022_2023 : Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door with<br>6mm thick toughened glass comprising of uPVC multi-chambered frame, sash and mullion (where ever<br>required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made<br>from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded<br>glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and<br>one handle on each side of panels along with zinc plated mild steel multi point locking having<br>transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to<br>finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and<br>fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for<br>fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent<br>finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of<br>PRICE EST NO:2020/12989<br>printed on 18-11-2020 11:45:01 page 101<br>Other Engineering Organisations<br>P R I C E<br>approved quality, all complete as per approved drawing & direction of Engineer-in-Charge<br>Note: For<br>uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of<br>profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash<br>67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead<br>of appropriate dimension.<br>
149.04
-
-
od248303/2022_2023 : Supplying and filling the sunken slab area by BRICK-BATCOBA by adding integral Waterproofing compound approved make admixture at the rate specified in the manufacturer specification after entire completion of laying pipes, sanitary fittings etc. Rate shall include for preparation of surface, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. complete and all as directed.
30
-
-
Dormitory Block
-
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
611.1
-
-
od75379/2022_2023 : Extra for excavating trenches for pipes, cables, etc, in all kinds of soil<br>for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is<br>over corresponding basic item for depth upto 1.5 metre.)
377.05
-
-
od75381/2022_2023 : Extra for excavating trenches for pipes, cables etc. in all kinds of soil for<br>depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over<br>corresponding basic item for depth upto 1.5 metre).
377.05
-
-
5.37.1 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All wiork upto plinth level
87.59
-
-
5.34.1 : Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).
172.1
-
-
20.1.1 : Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):400 mm dia piles
777
-
-
20.1.3 : Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):500 mm dia piles
135
-
-
5.37.2 : Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V level
91.91
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
17940
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
363.96
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
257.29
-
-
od75385/2022_2023 : Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 100 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
35
-
-
od75386/2022_2023 : Supply and fixing of 0.8mm thk decking sheet manufactuared from hot dipped zinc coated high strength steel with minimum 340MPa yield strength and coating mass of AZ120 (min 120 gsm total of zinc coating on both sides) and approved studs are included with all cost of materials, labour charges etc.
882.2
-
-
2.35.3.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
494.5
-
-
6.47 : Providing and laying autoclaved aerated cement blocks masonry with 150mm/
230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V
level with RCC band at sill level and lintel level with approved block laying polymer
modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The
payment of RCC band and reinforcement shall be made for seperately).
106.14
-
-
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
111.44
-
-
13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
1185.6
-
-
13.11 : 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 ( 1 cement : 6 fine sand).
1152.57
-
-
22.23.1 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
137.7
-
-
22.23.2 : Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
1091
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2344.29
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
882.2
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
668.41
-
-
11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
77.38
-
-
od75387/2022_2023 : Providing and laying LEPPATO FINISHED Granite stone laying in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Architect
266.93
-
-
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
8.96
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
13.5
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
510.27
-
-
od75388/2022_2023 : Providing and laying Glazed Vitrified tiles Matt/Antiskid finish in floor of size 600 x 600 mm (thickness to<br>be specified by the manufacturer) with water absorption less than 0.08%<br>and conforming to IS:15622, of approved brand & manufacturer, in all<br>colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:<br>4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including<br>grouting the joints with white cement and matching pigments etc. The<br>tiles must be cut with the zero chipping diamond cutter only . Laying of<br>tiles will be done with the notch trowel, plier, wedge, clips of required<br>thickness, leveling system and rubber mallet for placing the tiles gently<br>and easily.
135.48
-
-
od75389/2022_2023 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
86.16
-
-
od75390/2022_2023 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
405
-
-
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
765
-
-
od75391/2022_2023 : Providing and fixing UPVC Factory Made ,white/Yellow colour casement /Sliding window,Louvers and door made of extruded profiles.Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc. making arrangments for fixing of hardware,EPDM gasket,1.2 & plus mn,0.2 mm thick galvanised steel profile to be incldued in required profile ,frame will be fixed to the wall with 8 mm x 100 mm long fasteners , all complete as per direction of Engineer in Charge ,The rate is inclusive of 6 mm Galzing,Louvers,Loks,Hardware hinges,handles and fiting etc.
173.94
-
-
od75392/2022_2023 : Providing and fixing asphaltic roofing shingles of suitable thickness(4-6mm) to withstand weather and other loading factors as would be required at site, as per directions of Engineer in charge. Colour and finish shall be approved by Engineer before procurement. Fixing shall be on standard mode, onto V board which will be paid under different item. Work should follow all good engineering practices as would be required to incorporate installations like rain water gutters, ridge cover on proper mode as per design shown in the image and rates shall be including all cost and conveyance of all item material labour lead lift etc complete upto the top most level of the building shown in the drawing
695.86
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
274
-
-
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
77.22
-
-
9.122.2 : Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.
44.2
-
-
od246428/2022_2023 : Prefabricated structural steel work riveted, bolted, or welded in built up sections, trusses, Built-Up/HR sections/Bracings, and framed work including supply & fixing of anchor bolts & base plates, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and epoxy painting 2 coats with approved quality epoxy paint all complete. The steel structure is to be designed fabricated, supplied, and erected through Pre-Engineering and the design shall be got approved from Client.
82000
-
-
13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats
1580
-
-
13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre
1580
-
-
13.48A.1 : Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including
priming coat of exterior primer applied @ 0.90 litre/10 sqm.
471
-
-
Yard Development Works
-
-
-
16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
122.55
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
23.3
-
-
od75380/2022_2023 : Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, awns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:a) 80 mm thick c.c. paver block of M-30 grade with approved colour design and pattern.
850
-
-
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
42.5
-
-
5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
69.9
-
-
5.33.2 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
236.8
-
-
4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
284.4
-
-
4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
608
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5000
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
30000
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
288
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1500
-
-
13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
270
-
-
13.45.1 : Finishing walls with textured exterior pint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm
24.25
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
8.11
-
-
od248304/2022_2023 : Constructing brick masonry manhole in cement mortar 1:4 (1cement:4 graded stone aggregated 20mm nominal size), foundation concrete 1:4:8 mix (1cement:4coarse sand: 8graded stone aggregated 40mmsize nominal size) in side plastering 12mmthick with cement mortar 1:3(1cement:3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement :2coarse sand :4graded stone aggregate 20mm nominal size) finished with floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45cm deep including C.I cover with frame (light duty )455x610mm internal dimensions total weight of cover and frame to be not less than 38kg(weight of cover 23kg and weight of frame 15 kg):With Sewer bricks conforming to IS:4885
3
-
-
od248305/2022_2023 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:250 mm dia pipe.
6
-
-
od248307/2022_2023 : Providing and laying Multi groove Paver tile of size 500 x 250mm x 40mm thick of Besant beton / approved make in all colours, finish, laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with cement etc., complete. Work include for preparation of base surface & finished the surface as directed.
38.27
-
-
Miscellenous
-
-
-
15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
10
-
-
15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
10
-
-
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
15
-
-
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar
15
-
-
15.13.1 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below
3
-
-
15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres
5
-
-
15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
1510
-
-
15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet
3000
-
-
od75382/2022_2023 : Providing and fixing Rain water gutter (FRP) of superior quality and of size 25 cm in depth and 20 cm in width including all necessary accessories/ clamps/ joints/stop ends etc. for the smooth installation of the same. Colour shall be as per direction of Engineer-in Charge.
85
-
-
od75383/2022_2023 : Socketing of Pile in rock by cutting the rock for a minimum of 450 mm for pile of dia 450mm & 500 mm
35.05
-
-
20.6.1.1 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityInitial test
1
-
-
od245377/2022_2023 : Chipping and removing top pf RCC Piles to lines & levels carefully, without damaging the remaining portion with all lead and lift including all labour charges, tools and equipment, disposing the debris within the specified location at site etc. complete as directed by the Engineer-in-Charge.
71
-
-
od245378/2022_2023 : Providing and fixing in position 12 mm thick of Shalitex Board at various joints such as isolated joints at well edge and column junction as per Engineer-In-Charges' direction with winsil neutral base sealant manufactured by GE silicon or approved equivalent as per manufacturers requirements etc. complete.
83.96
-
-
90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
90
-
-
90.12.7.42 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
120
-
-
90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
50
-
-
90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
100
-
-
90.12.7.12 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
250
-
-
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
150
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
4
-
-
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
6
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
12
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
14
-
-
90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)
250
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
150
-
-
1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
200
-
-
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
30
-
-
90.2.1.11 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).
45
-
-
90.2.1.13 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.
15
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
110
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
31
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
31
-
-
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
700
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
150
-
-
2.5.6 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door
2
-
-
2.5.4 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4+12), Double door
4
-
-
2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
4
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
16
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
240
-
-
2.4.5 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4+18), Double door
1
-
-
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
8
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
1
-
-
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
860
-
-
90.6.9.2 : Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit
800
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
900
-
-
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
25
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
6
-
-
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
3
-
-
2.4.4 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4+12), Double door
9
-
-
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
15
-
-
od65001/2022_2023 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required<br>3x4 sqmm
10
-
-
od65037/2022_2023 : Supply and installation of RJ45 socket with shutter
15
-
-
od66044/2022_2023 : Supply and Labour charges for erection of additional length of MS[B class medium grade]exhaust pipe line of suitable sizes ,with heat resistant Al painting to building top for 62.5 KVA DG.
1
-
-
od66053/2022_2023 : Diesel generator<br>Supply and Labour for Installation, testing& commissioning of 3 phase 62.5KVA Diesel generator, including required earthing, power/control cabling, terminations including getting the necessary clearance/ approval of generator from electrical inspectorate, testing of neutral CT, relays, meters etc.. as required[statutory charges shall be borne by the clients on production of valid proof][ Mechanical erection of packaged generator will be done by the generator supplier]<br>Make (Cummins/Kirlosker Green<br><br>
1
-
-
od66057/2022_2023 : Supply and labour of 40A 4P isolator in open enclosure
1
-
-
od66065/2022_2023 : Supply and labour for fixing 32A industrial socket
6
-
-
od66070/2022_2023 : Supply and fixing of 25A 4P AC-1 duty contactor 230V coil supply
4
-
-
od66073/2022_2023 : Supply and installation of 3kva online UPS with backup for 60 minutes
1
-
-
od66098/2022_2023 : Supply and fixing of IP-65 junction box suitable for connecting 3x2.5 sqmm cu cable
15
-
-
od66160/2022_2023 : Supply and installation of V25B+C/3+NPE 320V<br>BRAND: OBO 3 nos
6
-
-
od66218/2022_2023 : Supply and fixing of Iris slim surface mounted light LD80-101-XXX-60-SM (12W)
80
-
-
od66517/2022_2023 : Supply and fixing of Iris slim surface mounted light LD80-350-XXX-60-SM(6W)
20
-
-
od66535/2022_2023 : Supply and fixing of Philips metal LED up and down wall light
70
-
-
od66554/2022_2023 : Supply and Fixing of Mirror Light 10W 2 feet battern light
25
-
-
od66566/2022_2023 : Supply and Fixing of 11W LED BOLLARD<br>3000K/6500K EXTRUDED<br>ALUMINIUM HOUSING IP65<br>800MM HEIGHT
15
-
-
od66574/2022_2023 : Supply and Fixing of 20w tube light with housing/frame 1200mm
20
-
-
od66673/2022_2023 : Supply and Fixing of 17W Philips Ultron wall light
60
-
-
od66685/2022_2023 : Supply and Fixing of 12W T bulb with holder
18
-
-
od66734/2022_2023 : Supply and Fixing of 6W Picture light
60
-
-
od66748/2022_2023 : Supply and Fixing of 10W philips Vista glow exterior light<br>
56
-
-
od66774/2022_2023 : Supply and Fixing of Ceiling fan 1200mm 3 star rated
45
-
-
od66785/2022_2023 : Supply and Fixing of Ceiling exhaust fan 28w ceiling mounting white vent air sweep 130 mm
28
-
-
od66809/2022_2023 : Supply and Fixing of wall exhaust fan 9 inch
5
-
-
od66819/2022_2023 : Supply and Fixing of LT danger boards
1
-
-
od66821/2022_2023 : Supply and Fixing of shock treatment chart in glass with frame
1
-
-
od66832/2022_2023 : Supply and Fixing of 5kg dry powder fire extinguishers on clamp.
4
-
-
od66836/2022_2023 : Supply of Electrical ISI Grade Rubber Mat of size 2m x 1m x 6mm suitable for 440Volts Switchboards.
1
-
-
od66847/2022_2023 : Supply and Fixing of 25A TPN ISO with DOL<br> starter for 2HP motor with 0N/OFF push<br> button with suitable capacitors
5
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
30
-
-
17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brass
pillar taps
38
-
-
17.7.6 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap
2
-
-
17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern
16
-
-
17.10.2.2 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x460 mm bowl depth 200 mm
4
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
30
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
200
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
60
-
-
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
40
-
-
od69460/2022_2023 : Supply and Labour for Installation of Angle Cock <br>
100
-
-
od69822/2022_2023 : Supply and Labour for Installation of Health Faucet <br>
46
-
-
od70566/2022_2023 : Supply and Labour for Installation of CP Brass Shower Arm, Shower Head, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms.
22
-
-
od70570/2022_2023 : Supply and Labour for Installation of CP Brass Diverter, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms
22
-
-
od70573/2022_2023 : Supply and Labour for Installation of CP Brass Spout, complete with Supporting Accessories, wall chasing, refinishing etc as per building norms
22
-
-
od70576/2022_2023 : Supply and Labour for Sink Pillar cock
4
-
-
od70579/2022_2023 : Supply and Labour for Bottle trap<br>
4
-
-
od70599/2022_2023 : Supply and Labour for Installation of site 20mm dia C.P brass Concealed and Exposed part of Stop Cock[inside bathroom] including cutting and making good the wall wherever required (for drinking water/cooler/water filtering units)
68
-
-
od70607/2022_2023 : Supply and Labour for Installation of site 15mm dia C.P brass Bib tap/hose connector with wall flange including cutting and making good the wall wherever required
25
-
-
od70608/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>20mm dia section Brass Valve
5
-
-
od70609/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>25mm dia section Brass Valve<br><br>
5
-
-
od70610/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>32mm dia section Brass Valve<br>
5
-
-
od70612/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>40mm dia section Brass Valves <br>
5
-
-
od70641/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>40mm dia NR Valves <br>
2
-
-
od70671/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>50mm dia Brass ball Valves<br>
6
-
-
od70677/2022_2023 : Supply and Labour for Installation, testing and commission of valves stated as follows with all supports, fixing and fitting all as specified and shown on drawings and complying to relevant standards(ZOLOTO)<br>25 mm dia Air releasing valve<br>
7
-
-
od70687/2022_2023 : Supply and Labour for Installation of Lead free PVC-U SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Through floor, concrete etc. as required , replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>40mm OD Waste Piping<br>
46
-
-
od70693/2022_2023 : Supply and Labour for Installation of Lead free PVC-U SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Through floor, concrete etc. as required , replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>50mm OD Waste Piping<br>
42
-
-
od70703/2022_2023 : Supply and Labour for Installation of Lead free PVC-U SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Through floor, concrete etc. as required , replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>75mm type B OD Waste Piping <br>
150
-
-
od70713/2022_2023 : Supply and Labour for Installation of Lead free PVC-U SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Through floor, concrete etc. as required , replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>110mm Type B OD Soil Piping <br>
100
-
-
od70722/2022_2023 : "Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Ts, Elbows, Bends, Ys etc. Adapters, Air vents,<br>Clamping with GI U Clamps /supports, as required for firmly installing the pipes and adjacent to the building/ chasing the walls, concrete etc. as required, replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) "<br>110mm OD Waste Piping <br>
50
-
-
od70731/2022_2023 : "Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Ts, Elbows, Bends, Ys etc. Adapters, Air vents,<br>Clamping with GI U Clamps /supports, as required for firmly installing the pipes and adjacent to the building/ chasing the walls, concrete etc. as required, replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) "<br>110mm OD Soil Piping <br>
50
-
-
od70752/2022_2023 : "Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Ts, Elbows, Bends, Ys etc. Adapters, Air vents,<br>Clamping with GI U Clamps /supports, as required for firmly installing the pipes and adjacent to the building/ chasing the walls, concrete etc. as required, replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) "<br>110mm OD Rain Water Piping<br>
16
-
-
od70788/2022_2023 : "Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (4kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings. Ts, Elbows, Bends, Ys etc. Adapters, Air vents,<br>Clamping with GI U Clamps /supports, as required for firmly installing the pipes and adjacent to the building/ chasing the walls, concrete etc. as required, replastering and refinishing using cement plaster 1:3 mix (cement: coarse sand ). Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) "<br>160mm OD Rain Water Piping<br>
30
-
-
od70859/2022_2023 : Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (6kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings through trench having up to a depth of 1mtr /as per site condition and to make corresponding slope hence complete.[Excavation will be in the scope of contractor]. Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>160mmOD Rain water piping <br>
250
-
-
od70865/2022_2023 : Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (6kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings through trench having upto a depth of 1mtr /as per site condition and to make corresponding slope hence complete.[Excavation will be in the scope of contractor]. Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>160mm OD Waste Piping <br>
220
-
-
od70876/2022_2023 : Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (6kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings through trench having upto a depth of 1mtr /as per site condition and to make corresponding slope hence complete.[Excavation will be in the scope of contractor]. Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>160mm OD Soil Piping <br>
210
-
-
od70888/2022_2023 : Supply and Labour for Installation of Lead free UPVC SWR pasted pipe (6kg/cm2) using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings through trench having upto a depth of 1mtr /as per site condition and to make corresponding slope hence complete.[Excavation will be in the scope of contractor]. Testing of the system for leakage and Air tightness (Supreme/Astral or equivalent) <br>110mm OD Waste Piping <br>
20
-
-
od70890/2022_2023 : "Supply and Labour for Installing at site UPVC multi inlet traps and outlet connections to pipes using solvent cement complete as required for floor drains.<br>(Supreme/Astral or equivalent) "<br>Multi Inlet floor trap 110x75x50/40mm.<br>
65
-
-
od70893/2022_2023 : Supply and Installation of 125x125mm CP Stainless Steel Gratings with Cockroach Protection for multi inlet floor trap.<br>
65
-
-
od70900/2022_2023 : Supply and Labour for Installing at site Open UPVC Lead Free ASTM Schedule 80 Pipes (Equivalent Standard Size) with all accessories like bends, y's etc for Water supply Joined using Solvent Cement fittings suitable for the working pressure. Supporting exposed pipes using cement mortar at 60 cm intervals above terrace floor. Hydrostatic Testing of the Pipes using 10KG/cm2 test pressure for specified time period (Supreme/Astral or equivalent) <br>40mm Nominal Dia ASTM<br>
40
-
-
od70903/2022_2023 : Supply and Labour for Installing at site Open UPVC Lead Free ASTM Schedule 80 Pipes (Equivalent Standard Size) with all accessories like bends,y's etc for Water supply Joined using Solvent Cement fittings suitable for the working pressure. Supporting exposed pipes using cement mortar at 60 cm intervals above terrace floor. Hydrostatic Testing of the Pipes using 10KG/cm2 test pressure for specified time period (Supreme/Astral or equivalent) <br>50mm Nominal Dia ASTM<br>
50
-
-
od70985/2022_2023 : Supply and Labour for Installation at site ASTM schedule 40 Pipes of Equivalent Standard Size with all accessories like bends,y's etc for Water supply Joined using Solvent Cement fittings with metal fill in suitable for the working pressure. Chasing of the walls, concrete etc. as required, replastering and refinishing using Cement Plaster 1:3 mix [Cement : Coarse sand]. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Finolex/Astral or equivalent) <br>20mm Nominal Dia<br>
100
-
-
od70988/2022_2023 : Supply and Labour for Installation at site ASTM schedule 40 Pipes of Equivalent Standard Size with all accessories like bends,y's etc for Water supply Joined using Solvent Cement fittings with metal fill in suitable for the working pressure. Chasing of the walls, concrete etc. as required, replastering and refinishing using Cement Plaster 1:3 mix [Cement : Coarse sand]. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Finolex/Astral or equivalent) <br>25mm Nominal Dia<br>
130
-
-
od70997/2022_2023 : Supply and Labour for Installation at site Concealed/open ASTM Schedule 80 Pipes of Equivalent Standard Size with all accessories like bends,y's etc for Water supply Joined using Solvent Cement fittings with metal fill in suitable for the working pressure. Supporting vertically exposed pipes using rails at 80 cm intervals through duct/wall etc. as required, replastering and refinishing using Cement Plaster 1:3 mix [Cement : Coarse sand]. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Finolex/Astral or equivalent) <br>32mm Nominal Dia ASTM<br>
10
-
-
od71053/2022_2023 : Supply and Labour for Installation at site Concealed/open ASTM Schedule 80 Pipes of Equivalent Standard Size with all accessories like bends,y's etc for Water supply Joined using Solvent Cement fittings with metal fill in suitable for the working pressure. Supporting vertically exposed pipes using rails at 80 cm intervals through duct/wall etc. as required, replastering and refinishing using Cement Plaster 1:3 mix [Cement : Coarse sand]. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Finolex/Astral or equivalent) <br>40mm Nominal Dia ASTM<br>
50
-
-
od71059/2022_2023 : Supply and Labour for Installation, testing and commissioning of Manholes, valvechamber, sandtrap etc..<br>including escavation, backfilling, disposel, concrete<br>waterproofing etc upto 1 metre depth all in accordance with the drawing ,specification and relevant standards.<br>Size(as per the site condition): 60 cm x 60 cm<br>
56
-
-
od71069/2022_2023 : Supply and Labour for Installation,testing and commissioning of Manholes, valvechamber, sandtrap etc..<br>including escavation,backfilling, disposel, concrete<br>waterproofing etc upto 1 mtr depth all in accordance with the drawing ,specification and relevant standards.<br>Size(as per the site condition): 45 cm x 45 cm<br>
30
-
-
od71080/2022_2023 : MANHOLE COVER<br>Supply and Labour for Installation ,testing & commisssioning of ISI marked FRP manhole cover and frame of (10 ton withstanding capacity) conforming to the latest relevant IS specifications<br>Make:Thermodrain<br>Size: 60 cm x 60 cm<br>
56
-
-
od71085/2022_2023 : MANHOLE COVER<br>Supply and Labour for Installation ,testing & commisssioning of ISI marked FRP manhole cover and frame of (10 ton withstanding capacity) conforming to the latest relevant IS specifications<br>Make:Thermodrain<br>Size: 45 cm x 45 cm<br>
30
-
-
od71088/2022_2023 : Supply and Labour for Installing and Leveling Pipe Supports Fabricated from GI Slotted Rails / Channels of corresponding as per the site condition with suitable for carrying the operating weight of pipe and the fluids , 12mm Dia GI Adjustable Threaded Rods and Anchor Fasteners on wall, U clamps etc.as appropriate. <br>50cm width with 80cm interval<br>
120
-
-
od71093/2022_2023 : Labour charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.<br>110 mm dia<br>
28
-
-
od71108/2022_2023 : Labour charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.<br>75mm dia<br>
24
-
-
od71123/2022_2023 : Labour charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.<br>160mm dia<br>
8
-
-
od71202/2022_2023 : Supply & Installation of Grab Bar<br>
12
-
-
od71546/2022_2023 : Supply and Installation of Towel Ring <br>
22
-
-
od71547/2022_2023 : Supply and Installation of Robe Hook<br>
22
-
-
od71548/2022_2023 : Supply and Installation of Towel Rack<br>
22
-
-
od71549/2022_2023 : Supply and Installation of Towel Rod<br>
22
-
-
od71550/2022_2023 : Supply and Installation of Soap Dish<br>
22
-
-
od71551/2022_2023 : Supply and Installation of Hand Dryer<br>
10
-
-
od71552/2022_2023 : Supply and Installation of Tissue Holder<br>
22
-
-
od71553/2022_2023 : Supply and Labour for Installation of water level float switch system for water level controlling<br>
7
-
-
od71554/2022_2023 : Supply and Labour for laying of 40mm nominal dia scheduled 80 ASTM from well to OH Tank through trench<br>
250
-
-
od71555/2022_2023 : Supply and Installation,testing and commissioning of 3HP openwell submersible pumps of discharge at 60m head including all required accessories like foot valve,clamps, etc<br>
2
-
-
od71556/2022_2023 : Supply and installation of OH Tank of capacity 5000 litre<br>
5
-
-
od71557/2022_2023 : Supply and installation of 2 tonne Heat pump with 1000 Litre tank.<br>
1
-
-
od71558/2022_2023 : Supply and installation of Water heater with 10 Litre tank<br>
5
-
-
od71559/2022_2023 : 20KLD Sewage Treatment Plant (Civil works not under contractors scope)<br>
1
-
-
od145833/2022_2023 : "MSB<br>Supply,Installation,Testing and commissioning of 125A MV Cubicle panel. Fabricated out of 16 swg CR CA sheet, powder coated dust and vermin tight proof ,front opening type,cable bottom entry flush and floor mounted free standing on 4” MS channel directly bolted to floor using nuts and bolts stenciling all identification etc.. confirming to IS1863,<br>IE rules .<br><br>"<br>"Incomer<br>125A 4P 25 KA thermomagnetic type MCCB-1Nos <br>125A 4P ISO -1Nos<br>125A 4P AC 3 duty contactor-2Nos<br>AMF relay-1Nos<br>Class B&C type-1,type-2 surge arrestor- 1 No.<br>Multifunction meter with cutout fuse-1 No. <br>RYB pilot lamp controlled with 2A MCBs- 2set <br>Electrical and mechanical interlocking shall be done<br><br> <br>"<br><br>"Outgoings<br>63A TP 18kA thermomagnetic type with variable setting MCCB with all isolation duty -3Nos<br>40A TP 18kA thermomagnetic type with variable setting MCCB with all isolation duty -5Nos<br>All MCCB must be rotory operated<br>Busbar :125A TPN Al busbar"<br>
1
-
-
od145834/2022_2023 : "METERING BOARD WITH ISOLATION<br> Supply and labour charges for installation, testing &commissioning of 125A MV cubical panel board, dust& vermin tight proof,powder coated front opening type, cable bottom entry type, wall mounted using nuts & bolts, stenciling all identification etc.. Confirming to IS1863,IE rules <br>Incomer -<br>125A 4P 25KA Thermomagnetic based MCCB with variable setting with all isolation duty -1No with 3 nos.100A porcelain cut out fuse and provision for ct metering. -1No <br>40A 4P MCB with provision for KWH metering-1 nos(solar) <br>All MCCBs are with rotary operating handle for door interlock.<br>Busbar :125A TPN Al busbar"<br>
1
-
-
od146061/2022_2023 : Earthing with CI earth plate 1200 mm X 1200 mm X 12 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.<br>
7
-
-
od146124/2022_2023 : Preparation of necessary drawing (Initial & final) and getting all necessary approvals/sanction, inspection etc.from EB and Electrical Inspectorate including all sundries expenses except statutory charges. Statutory charges shall be reimbursed only after producing valid proof.<br>
1
-
-
od149097/2022_2023 : "Providing and fixing of IEC 62561 tested suitable cross connector, parallel connector, expansion piece with connector (For equalising temperature related length changes) to route horizontal conductor /mesh formation made of stainless steel.<br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>
40
-
-
od149098/2022_2023 : "8mm solid aluminium round conductor: For Sheet ridge position conductor routing application: Meets the technical specification according to .<br>Meets the requirement of IS/IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5) With 50 sq.mm cross sectional area installed with Ridge conductor holder with tensioning spring - Stainless steel Conductor holder <br>Conductor holder @ 1 meter distance<br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>
32
-
-
od149099/2022_2023 : "Application : Polycarbonate Sheet <br>8mm solid aluminium round conductor: For concrete building Polycarbonate Sheet application: Meets the technical specification according to .<br>Meets the requirement of IS/IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5) With 50 sq.mm cross sectional area installed with Polyamide Conductor holder with bonding base .With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.<br>Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance Bonding Base: With threaded stem M8. For Mounting conductor supports with M8 female thread. For bonding to concrete, steel or brickwork.<br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>
105
-
-
od149100/2022_2023 : Supply of Clamping shoe: With Ø 11 mm attaching hole, 2 hexagonal bolts M8 x 16, Bolts hot-dip galvanised steel and clamping element hot dipped galvanised cast steel<br>
8
-
-
od149101/2022_2023 : "8mm solid aluminium round conductor: For concrete building<br>Meets the requirement of IS/IEC 62305. RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area installed with Polyamide Conductor holder having M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.<br>Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance<br>Tested from a laboratory accredited by UL, KEMA or VDE"<br>Horizontal run- Parapet application
136
-
-
od149102/2022_2023 : "8mm solid aluminium round conductor: For concrete building<br>Meets the requirement of IS/IEC 62305. RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area installed with Polyamide Conductor holder having M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.<br>Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance<br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>Vertical run- down conductor
160
-
-
od149103/2022_2023 : "Folding clamp to standseam roof for round conductor with a diameter of 8 mm to 16 mm.<br>Material : Hot-dip galvanised.<br>Suitable for bonding and fixing horizontal round conductor air terminal to standseam sheet.<br>Suitable to fix for seam roof thickness up to 20 mm.<br>Tested from a laboratory acredited by UL, KEMA or VDE <br>"<br>
10
-
-
od149104/2022_2023 : Supply of 1000mm long vertical air terminal 10mm dia with mounting accessories base on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical and mechanical as per IEC 62561. Tested from a laboratory acredited by UL, KEMA or VDE<br>
15
-
-
od149233/2022_2023 : Providing maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of 3m length , having a diameter of 17mm with copper coating thickness of 250 microns with fault current withstand capability. Universal SS Clamp made of SS 304 for clamping. Earth enhancing compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 Ωm. It should be free from hazardous substances The mineral compound is required to have minimum 25 Kg of the total composite. Polypropylene & Polyethylene (UFE)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 170mmx 170mmx 190mm with a weight bearing capacity of 50KN. <br>
4
-
-
od149234/2022_2023 : "Providing of IEC 62561 TESTED cross GI connector: For Staright and cross connection and flat holder, to route test joint to earth pit connection formation made of GI strip necessary screws etc with Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric as required. IS/IEC 62305<br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>
47
-
-
od149235/2022_2023 : "Providing and laying Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square<br>According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding"<br>
280
-
-
od149236/2022_2023 : "Supply of Test Joint includes test connection made of SS, suitable to connect 8mm round conductor and GI Strip with suitable to connect<br> 1 x 8mm round conductor , 7 x single or multi-core conductors to 25 mm² or fine-core<br>conductors to 16 mm² , 1 x Flat upto 30x3 mm as<br>Recommended for future Inspection/ Testings 50ka impulse tested declared. Tested from a laboratory acredited by UL, KEMA or VDE<br>with the test box to ground entry point to be covered 1.5m with trapezoidal load bearing duct 60X25 tested for point load "<br>
12
-
-
od149237/2022_2023 : "Providing and fixing of Bridging cable: From flexible copper cable 16 mm², Coating: black, chlorinated India rubber mixture, With 1 mounting hole Ø 10.5 mm per attachment side, With 2 mounting holes Ø 7.3 mm per attachment side, For applications outside or inside suitable. <br>Tested from a laboratory acredited by UL, KEMA or VDE"<br>
8
-
-
od146437/2022_2023 : Supply, installation, testing and commissioning of Pressure Gauge with required range/capacity.<br>
2
-
-
od146438/2022_2023 : Supply, erection, testing and Commissioning of Motor control panel for Terrace pump incorporating automatic direct online starter for fire pumps switch gear rated for the motor HP. The control panel mounting shall include necessary indication lamps for the RYB phase showing the power supply conditions ammeter with clear indications or motor full load current, voltmeter with selector switch etc. The panel shall duily painted with proper anti-corrosive lacquer and is of wall mounted type with all accessories as required etc. complete. <br>
2
-
-
od146439/2022_2023 : Supply, Installation, Testing and Commissioning Electrically driven Monoblock Terrace pump of capacity 900 LPM with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts etc. complete, The Pump set shall be of 5 HP. (Foundation required shall be provided by the client). <br>
2
-
-
od147040/2022_2023 : Supply, installation, testing and commissioning of Pressure Switch for automatic operation.<br>
2
-
-
od147376/2022_2023 : Under Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589 / IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, laying under ground, by using suitable supports,and wrapping with polymer corrossion protection tape confirming to IS 10221 with proper overlapping, trimming etc complete. etc. complete (The Rate for excavation shall be extra as applicable) : 100mm dia <br>
50
-
-
od147377/2022_2023 : Above Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589/ IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessary)<br>80mm dia
10
-
-
od147378/2022_2023 : Above Ground Piping: Supply, erection, testing and commissioning of heavy duty M.S 'C' class Pipes confirming to IS 3589/ IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. (Core cutting in walls/beams/columns for laying pipes shall be provided by client, if necessary) <br>100 mm dia<br>
50
-
-
od147401/2022_2023 : Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standared lever operated type confirming to IS 13095 with required flanges, nuts, bolts etc. complete.<br>
6
-
-
od147402/2022_2023 : Supply, installation, testing and commissioning of C.I. Non-Return Valve slim seal type with required flanges, nuts & bolts, gasket etc. complete<br>
2
-
-
od147403/2022_2023 : Supply, installation, testing and commissioning of instantaneous pattern SS Single Headed Hydrant valve of 63mm Dia, oblique type, instantaneous hose coupling adaptor complete with PVC blank cap etc.<br>
6
-
-
od147404/2022_2023 : Supply and placed in position of SS Branch Pipe, 63mm female instantaneous inlet, male threaded outlet, complete with hexagonal base nozzle. <br>
6
-
-
od147405/2022_2023 : Supply and placed in position of Controlled Percolated Hose conforming to IS: 636, 63mm dia, 15 Mtrs length with SS 63 mm pair of male and female couplings etc. <br>
6
-
-
od147406/2022_2023 : Supply, installation, testing and commissioning of Hydraulic Hose Reel drum completed with swinging type drum with 19mm dia thermoplast braided hose of 30M. length and Shut off nozzle, with necessery fittings etc. complete. <br>
6
-
-
od147407/2022_2023 : Supplying, installing, testing and commissioning of Cast iron Ball valves with fittings of screwed end type. 25mm dia<br>
6
-
-
od147408/2022_2023 : Supply, installation, testing and commissioning of Single Door Hose Cabinet to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made of 20swg M.S Sheet, glass fronted with hinged door and lock. The cabinet is spray painted to scarlet red color. <br>
6
-
-
od147409/2022_2023 : Supply, installation, testing and commissioning of single acting Air Release Valve with screwed inlet 20mm dia etc.<br>
2
-
-
od147410/2022_2023 : Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 2 nos of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia.etc. Pipe manifold shall be connected to down comer pipe.<br> <br>
1
-
-
od147411/2022_2023 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. EXIT <br>
4
-
-
od147412/2022_2023 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. FIRE EXIT <br>
4
-
-
od147413/2022_2023 : Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. FIRE DUCT <br>
6
-
-
od147673/2022_2023 : Supply, installing, testing and commissioning of Micro processor based Main Fire alarm control panel of 4 zones capacity, with visual LED indications for fire / fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minutes alarm operation. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door shall be glass fronted type with locking arrangement, as per specification.<br>
1
-
-
od147674/2022_2023 : Supply, Installation, testing and commissioning of Manual Call Point break glass type as per standrad specification. <br>
6
-
-
od147675/2022_2023 : Supply, installation, testing and commissioning of Electronic dual tone Hooter (Sounder) as per standard specification. <br>
6
-
-
od147676/2022_2023 : Supplying and laying of P.V.C conduit with all necessary fittings. Etc.<br>
100
-
-
od147677/2022_2023 : Supplying and laying of 1C x 1 Sq.mm cross section PVC insulated copper wires.<br>
160
-
-
od147701/2022_2023 : Supplying, and fixing of ABC type fire extinguisher of 4Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. complete.<br>
6
-
-
od148580/2022_2023 : Supplying and installing in position laminated sheet of "Fire Evacuation Plan". Providing wall mounting display board with double side 3mm thick imported acrylic sheet & glowsheet with SS Studs Digital color print on Traceperacy Sheets : Size 24"X18"<br>
4
-
-
od148589/2022_2023 : Supplying and installing in position Exit LED Signage (Arrow) - green led lightning with Battery backup for 3 hrs<br>
12
-
-
od148597/2022_2023 : Supplying and installing in position FIRE EXTINGUSHERS Signages ( Acrylic + Self Illumiated with LED Lights no backup, Triangular Type) Size 15"X4"<br>
6
-
-
od148607/2022_2023 : Supplying and installing in position Safe Assemble Point with 8 feet Size 2"X1"<br>
2
-
-
od148612/2022_2023 : Supplying and installing in position Way to safe assemble point with 8 feet Size 2"X1"
1
-
-
od148613/2022_2023 : Supplying and installing in position Fire Order Board 3"X2"
2
-
-
od148614/2022_2023 : Supplying and installing in position STAIRCASE SIGNAGES Acrylic + Self Illuminated Size 16"X6"
6
-
-
od73849/2022_2023 : Providing and installing bunker beds - two tier, with mattresses, 4-6 inch thick non- quilted with pillow. Bunker beds shall be powder coated or two coat painted in synthetic enamel, putty finished. The set shall come with integrated rails and footstep to upper bunker, and shall be of adult size and with a pleasing appearance. the unit shall remain rust free for another ten years. Mattress taken shall be right fit for the cot.
21
-
-
od157763/2022_2023 : Providing sleeping bags of adult size with full body cover to be used in simple tents. The bag may have comfortable packing with padded sleeping base and cover ups, preferably of a washable material
36
-
-
od73850/2022_2023 : Providing and fixing bedside table 55-60 cm height and top size not less than 45 x 45 cm or nearest. The unit should have one drawer and another space with an openable shutter
5
-
-
od73851/2022_2023 : Providing and fixing Queen size cot and 8 inch mattresses , quilted on one side and orthotic . Cot to have head board attached or separated from the cot. Cot may or may not have storage box beneath but all members used for making shall be solid wood only either mahogany or malaysian teak only. Mattress shall come with a pair of pillows to suit the bed
3
-
-
od73852/2022_2023 : Providing and installing (if any required), Dining chairs in hard wood second class teak /indonasian teak/mahogany with PU polish for finishing and in standard dimensions to suit the table height and without arm rests. Chair back can be either wooden members or cane mats. Seating need not have cushion or foam seating. four legs and supporting members shall be in knot free wood of above said grade and variety and should have standard dimensions to last for ten years without breaking. Shop drawing shall be got approved before purchase . Engineer in charge shall direct on all specifications regarding the item
8
-
-
od73853/2022_2023 : Providing and fixing solid wood HI TABLE (200X40cm size) in teak wood second class Indian Teak or Indonasian teak , for supports and base, with rounded eges. Wooden members shall be polished in PU . The tables should be durable enough without sagging of any members and shop drawing of same shall be got approved by the Engineer - in -charge before execution
2
-
-
od73855/2022_2023 : TABLE (180X90cm size)<br>Providing and fixing solid wood dining table in teak wood second class Indian Teak or Indonasian teak , for supports and base, and with black finish granite top 16mm thick with rounded eges. Wooden members shall be polished in PU . The tables should be durable enough without sagging of any members and shop drawing of same shall be got approved by the Engineer - in -charge before execution
2
-
-
od73857/2022_2023 : Providing and installing steel almirahs to offices with height not less than 210mm and other dimensions to suit the nearest available as per manufacturers specification from brands like Godrej/Featherlite/Monarch etc. with powder coated finishes and to be used for keeping files and washed linens. Mirror not required
2
-
-
od73858/2022_2023 : Providing and installing wardrobe with laminated IS 303 grade plywood 16mm thick, (105x45x220cm size), with shutters in matching prelaminated plywood and interiors finished in two coats of synthetic painting stain matt finish, with provisions for hangers and racks for safe keeping of items in guest rooms
2
-
-
od157778/2022_2023 : Filling available excavated earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 100 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
10
-
-
od157779/2022_2023 : Providing and fixing Exterior Grade V Board of 12mm thickness and with a density not less than 1200 Kg/ Cu.mtr and shall meet requirements s per IS 14862:2000.All necessary accessories required for smooth fixation of V Board shall be considered.
80
-
-
od157782/2022_2023 : Providing and fixing asphaltic roofing shingles of suitable thickness(4-6mm) to withstand weather and other loading factors as would be required at site, as per directions of Engineer in charge. Colour and finish shall be approved by Engineer before procurement. Fixing shall be on standard mode, onto V board which will be paid under different item. Work should follow all good engineering practices as would be required to incorporate installations like rain water gutters, ridge cover on proper mode as per design shown in the image and rates shall be including all cost and conveyance of all item material labour lead lift etc complete upto the top most level of the building shown in the drawing
80
-
-
od157783/2022_2023 : Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
5.4
-
-
od157784/2022_2023 : Providing and fixing PVC eave board of good quality approved by the engineer J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Eave's pieces
2
-
-
od157785/2022_2023 : Supply and installation of training chairs , with adjustable writing pad on arm side, four, SS legs with cushion back and seat covered in superior grade fabric from approved brands like Featherlite/Godrej/Monarch/ Wipro etc. with proven track record under works with Kerala IT Parks to ensure quality and standards. Chairs are to have ergonomic designs.
10
-
-
od157786/2022_2023 : Preparing the surface with 25-40 mm thick concrete screed( 1:2:4) by using coarse graded aggregate of 6 to 12 mm size laid over floor concrete and finished smooth and even surface to receive the Tile adhesive/Cement mortar as instructed by Client. Thickness up to 25 mm
10
-
-
od157787/2022_2023 : Providing & laying Fire Retardant Carpet Flooring of 100% Nylon Type 6, material Carpet tile of nominal thickness of 4-5 mm with size of 500 mm x 500 mm respectively of approved make Welfsun carpet or equivalent. Completely & neatly finished. Tile size may be approved with minimal tolerance limits as provided by the Manufacturer's specification (Basic Rate:1345.50)
40
-
-
od74011/2022_2023 : Supply and installation of work chairs reolving , with adjustable arm rests, gas lift, SS leg and SS or fiber five spoke base, lumbar support, mesh back covered , without head rest , mid back series from approved brands like Featherlite/Godrej/Monarch/ Wipro etc. with proven track record under works with Kerala IT Parks to ensure quality and standards. Chairs are to have ergonomic designs.
4
-
-
od73859/2022_2023 : Supply and installation of visitor chairs with SS legs non revolving, with lumbar support, mesh back or leatherite covered , without head rest ,medium back series from approved brands like Featherlite/Godrej/Monarch/ Wipro etc. with proven track record under works with Kerala IT Parks to ensure quality and standards. Chairs are to have ergonomic designs.Visitor chairs chosen shall also be in sync with Executive chair models selected for better aesthetics.
7
-
-
od73861/2022_2023 : Supply and fixing of workstations not less than sizes 1200 x 550 - non-sharing , linear (2no ) with privacy screens in planilaque glass and end modesty in laminated MDF or metal , with provisions for writing boards in glass or pin up boards,and with matching pedestals on rolling casters one for each , and two or three drawers lockable, made by pre-laminated MDF table tops and sides and standard steel members in main support members. Items may be selected from brochures of approved brands like Godrej/Featherlite/Wipro/Monarch etc. which are companies running under Green certification protocol. Dimensions and finishes shall be as per standards followed in government owned Kerala IT park premises
1
-
-
od74026/2022_2023 : Supply and fixing of L shaped workstations not less than sizes 1800 x 550 - with return desks 1200mm or near. Unit shall come with matching pedestals on rolling casters one for each , and two or three drawers lockable, made by pre-laminated MDF table tops and sides and standard steel members in main support members. Items may be selected from brochures of approved brands like Godrej/Featherlite/Wipro/Monarch etc. which are companies running under Green certification protocol.Dimensions and finishes shall be as per standards followed in government owned Kerala IT park premises
1
-
-
od74222/2022_2023 : Providing and installing 4-5mm thick mirrors not less than 120cm x 120 cm to guest rooms to aid a dressing counter. Mirror shall have plywood backing and wooden frames of 40mm width.Mirror shall be from brands Modi/Asahi or Sanit Gobain only
1
-
-
od74223/2022_2023 : Providing roll out cots (collapsible,folding) and mattresses 4-6 inch thick 4 nos , lounge chairs 2 nos, exterior grade , for facilitating tent stay. Invoices of each item will form part of the bill and MRP shall not be less than Rs.26,000/- without GST , all put together
1
-
-
od74224/2022_2023 : Supply and installation of premium tent of size to accomodate 2-3 sleeping bags inside . Ground preperation and foundation works will be done under other general civil items paid in respective items. floor of tent shall be finished with rugs of moisture resistant grade. Tent shall come with all accessories which come fixed to tent for normal operation of it as a shelter with all openings having mosquito nets and sealable canvas covers and rain guards. Material and frames of tent shall be weatherproof and item shall come with a warranty of not less than 5 years from approved brands. Contractor shall provide 4 or 5 choices of Tents from brands like Camp King/Decathlon or equivalent who have supplied to Government of Kerala before and has a successful track record for durable supply. Loose furniture will not come under this item scope.
1
-
-
od74225/2022_2023 : Supply and installation of student tents size enough to carry one person inside . Ground preperation and foundation works will be done under other general civil items paid in respective items. Tent shall come with all accessories which come fixed to tent for normal operation of it as a shelter with all openings having mosquito nets and sealable canvas covers. Material and frames of tent shall be weatherproof and item shall come with a warranty of not less than 2 years from approved brands. Contractor shall provide 4 or 5 choices from brands like Camp King/Decathlon or equivalent who have supplied to Government of Kerala before and has a successful track record for durable supply. Loose furniture will not come under this item scope. Zippers, covers,canvas etc shall be heavy duty and to resist rough handling by students under training. and colours shall be sunlight resistant .
8
-
-
30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
60
-
-
30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
50
-
-
30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
50
-
-
30.2.10.1 : Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions
300
-
-
30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
600
-
-
od247976/2022_2023 : Providing & installing Garden Sprinkler, Adjustable 360 Degree Rotation Lawn Sprinkler, Large Area Coverage, 3 Arm Sprinklers for Yard for Plant Irrigation .This includes necessary fixation of hosing & other necessary fittings from tapping point. Minimum size of sprinkler shall be 29 x 29 x 9.5 cms. Material shall be Acrylonitrile Butadiene Styrene.
15
-
-
od247977/2022_2023 : Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, fittings up to 50 mm dia SDR 11 ASTM CTS and above 50mm dia CPVC schedule 80, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement,trenching, refilling &testing of joints complete as per direction of Engineer in Charge.External work of 100 mm nominal outer dia pipes
80
-
-
od247988/2022_2023 : Providing and Displaying Cosmos well developed fresh & healthy 20 to 25<br>cm ht. attractive colors multi branching at blooming stage in 20 cm Earthen<br>Pot/Plastic Pot and as per direction of the officer-in-charge
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements